RAD type

FLAMEPROOF EX D • INCREASED SAFETY EX E • FOR INDOOR & OUTDOOR APPLICATIONS

FOR ARMOURED CABLES • INNER AND OUTER SEALING

1 Cable glands RAD type (code: RAD)

The sealing ring blocks the cable on the under armour diameter.
The addition of the sealing ring on the outer sheath guarantees a
complete protection of the cable armour.
Cable glands EMC tested by triaxial method, according to
IEC 62153-4-3, IEC 62153-4-4 standards.
Metric cable glands are made according to EN 62444 standard.
Maintenance and installation operations and product selection must
be done in accordance with IEC EN 60079-14 and 17 standards.

Application fields Surface - Group II • Mines - Group I

Approvals / Certifications
ATEX INERIS 06 ATEX 0014X
IEC Ex: IEC Ex INE 10.0010X
EAC: RU C-IT.AЯ 45.B.00909
Type examination certificate: INERIS 17 ATEX 3009X (Ex nR IIC Gc)

Protection type
Ex db IIC • Ex eb II (gas) • Ex tb IIIC (dusts) • Ex db I • Ex eb I (mines)

EPL (Equipment protection level)

Zone 1-2: Mb mines • Gb, Gc gas
Zone 21-22: Db Dc combustible dusts

Execution
Ex db IIC • Ex eb II • Ex tb IIIC • Ex db I • Ex eb I Db
according to
ATEX: EN 60079-0:2012 • EN 60079-1:2014 • EN 60079-7:2015 •
EN 60079-31:2014 • EN 60529:1991
IEC Ex: IEC 60079-0:2011 • IEC 60079-1:2014 • IEC 60079-7:2015 •
COMPONENTS IEC 60079-15:2010 • IEC 60079-31:2013 • IEC 60529:1989

5 Ambient temperatures in services: sealing washers materials

Backnut EPDM seals -40°C ÷ + 100°C (code: EP)
Silicone seals -65°C ÷ + 220°C (code: SI)
Anti-friction ring
Cable type
Outer seal Armoured: Single armoured cable SWA, Alluminium wire armoured
cable AWA,Alluminium strip armoured ASA. Single wire braided
Intermediate
cable SWB, Steel tape armored cable STA, Pliable wire armoured
cable PWA. Screened flexible wire braided cable CY-SY
Clamping ring
Reduced cone available for SWA armoured cables.

8 Armour cone (See p. 54)

6 Available materials
Brass (code: OT) • Nickel-plated brass (code: ON)
X Y Inner seal
AISI316L Stainless steel (code: S6) • Aluminium (code: AL)
AVP Steel (code: AVP)
Body
Available threads
ISO 262 Metrical • ISO 228 • DIN 40430 Pg
ANSI B1.20.1 NPT • EN 10226 Gk (only for ATEX)

OPTIONS Degree of protection

The cable glands degree of protection is IP66 or IP66/68, 30-meters
O-Ring (see p. 128) depth for 7 days according to the IEC EN 60529 standard; the
degree of protection IP 68 is obtained by using flat sealing rings on
Sealing washer cable glands with cylindrical threads. Without gaskets, the degree
7 of protection is IP 66. If the cable glands with cylindrical or tapered
Locknut threads are screwed on the threaded hole of an apparatus, in order
to guarantee an IP66 or IP66/68 degree of protection, threaded
Shrouds parts must be sealed with Loctite or similar. In order to maintain
the IPX8 degree of protection, the cable entry shall be fitted on
Earth tags enclosure witch satisfies an immersion test under 30 meters of water
during 7 days. Metric cable glands are made in accordance to
EN 62444 Standard.

0 Kit version (code: KIT)

Includes cable glands and
the requested complete series of
the rubber seals accompanying the size.

66 cable glands & accessories • www.rcn.it • 01.2019

 EXAMPLE CODE TECHNICAL DRAWING
See page 56

0 1 2 3 3E 4 5 6 7 8 øCe E2-S2 E2-S2 E1-S1 øC

KIT RAD. 25. 13. 24. N25. EP. ON. OR. BS

Optional Type Size ØC ØC Thread Seals Material Optional Optional øF øB øD

code Max Max code material code code code
code

Kit series Inner seal Outer seal See tab. EP•SI OT•ON•S6 O-Ring Reduced
(10,5 ÷ 13) (19 ÷ 24) page 57 AL•AVP cone H L
HT

2 3 3E 8 4
ARMOUR RANGE Ø D - THREADS DIMENSIONS
ØC Ø Ce
SIZE Min - Max Min - Max Cylindrical Tapered

Weight
Standard Reduced
Inner seal Outer seal cone X* cone Y** ISO ISO DIN EN
NPT F HT H E1 S1 E2 S2
262 228 40430 10226
16 4 ÷ 7
7 ÷ 10 Pg7
(EP) M12x1,5 1 / 4” 1 / 4” 1 / 4”
5 ÷ 10 Pg9
4 ÷ 6 0 ÷ 0,5 0,5 ÷ 0,75 M16x1,5 3 / 8” 3 / 8” 3 / 8” 126 16 58 20 24 26 24 26
16 10 ÷ 15 Pg11
6 ÷ 8 M20x1,5 1 / 2” 1 / 2” 1 / 2”
(SI) Pg13,5
8 ÷ 10
5,5 ÷ 8 M16x1,5 Pg11
10 ÷ 15 1 / 2” 1 / 2” 1 / 2”
20 8 ÷ 10,5 0 ÷ 0,5 0,5 ÷ 1,25 M20x1,5 Pg13,5 228 20 64 20 30 33 32 35
14 ÷ 19 3 / 4” 3 / 4” 3 / 4”
10,5 ÷ 13 M25x1,5 Pg16
8 ÷ 10,5
10,5 ÷ 13 15 ÷ 20 M20x1,5 3 / 4” Pg16 3 / 4” 3 / 4”
25 0 ÷ 0,5 0,5 ÷ 1,25 264 25 64 20 35 38 36 39
13 ÷ 15,5 19 ÷ 24 M25x1,5 1” Pg21 1” 1”
15,5 ÷ 18
13 ÷ 15,5
15,5 ÷ 18 20 ÷ 26 M25x1,5 Pg21
32 0÷1 1 ÷ 1,6 1” 1” 1” 484 32 83 25 42 47 45 49
18 ÷ 21 25 ÷ 31 M32x1,5 Pg29
21 ÷ 24
21 ÷ 24
26 ÷ 32
40 24 ÷ 27 0÷1 1 ÷ 1,6 M40x1,5 1” 1/4 Pg29 1” 1/4 1” 1/4 576 38 83 25 48 53 50 55
31 ÷ 37
27 ÷ 30
24 ÷ 27
27 ÷ 30 31 ÷ 37 M40x1,5
50 0÷1 1÷2 1” 1/2 Pg36 1” 1/2 1” 1/2 730 44 83 25 55 60 57 62
30 ÷ 33 36 ÷ 43 M50x1,5
33 ÷ 36
36 ÷ 39
42 ÷ 48 M50x1,5 Pg42
63 39 ÷ 42 0÷1 1÷2 2’’ 2’’ 2’’ 961 54 83 25 68 74 67 73
47 ÷ 53 M63 x 1,5 Pg48
42 ÷ 45
45 ÷ 48
52 ÷ 58 M63x1,5
75 48 ÷ 51 0÷1 1÷2 2” 1/2 Pg48 2” 1/2 2” 1/2 1392 65 83 25 80 86 80 88
52 ÷ 64 M75x1,5
51 ÷ 54
54 ÷ 58
90a 64 ÷ 72 3026 74
58 ÷ 62 M75x1,5
0÷2 2 ÷ 2,5 3" / 3" 3" 115 30 100 107 100 107
60 ÷ 64 M90x2
90b 70 ÷ 78 2432 80
64 ÷ 68

• Standard Threads in bold • Dimensions are in millimeters • Weight in grams (gr) of brass version
• Inside the size, the external rubber seals may be matched with any interior rubber seals, compatible with the cable size. (See on page 57)
* Standard cone X: Suitable for all approved armour cables except SWA cables ** 8 Reduced cone Y: Suitable for SWA cables (code: BS)

01.2019 • www.rcn.it • cable glands & accessories 67