Syllabus FinalYr PDF

Course Curriculum
(Course Structure and Syllabi)

for
Bachelor of Technology
in
Mechanical Engineering
(Second Year Onwards)
Department of Mechanical Engineering
National Institute of Technology Hamirpur

Hamirpur – 177 005 (India)
Second Year
3rd Semester 4th Semester
SN Code Subject L T P Credits SN Code Subject L T P Credits
Organization Engineering
1 HS-203
Behavior
3 0 0 3 1 MA-203
Mathematics-III
3 1 0 4
Kinematics of
2 ME-211
Machines
3 1 0 4 2 ME-221 Dynamics of Machines 3 1 0 4
Engineering
3 ME-212
Thermodynamics
3 1 0 4 3 ME-222 Heat and Mass Transfer 3 1 0 4
Fluid Mechanics and

4 ME-213
Machinery
3 1 0 4 4 ME-223 Mechanics of Solids 3 1 0 4
Metrology and
5 ME-214
Measurement
3 1 0 4 5 ME-224 Industrial Engineering 3 0 0 3
Fluid Mechanics and

6 ME-215
Machinery Lab
0 0 2 1 6 ME-225 Material Testing Lab 0 0 2 1
Metrology and Heat and Mass Transfer

7 ME-216
Measurement Lab
0 0 2 1 7 ME-226
Lab
0 0 2 1
Kinematics and
8 ME-217 Machine Drawing Lab 0 0 2 1 8 ME-227 Dynamics of Machinery 0 0 2 1
Lab
Total Hours = 25 22 Total Hours = 25 22
Third Year
5th Semester 6th Semester
1 ME-311 Machine Design-I 3 1 0 4 1 ME-321 Machine Design-II 3 1 0 4
Manufacturing
Manufacturing Science
2 ME-312 Science and 3 1 0 4 2 ME-322 3 1 0 4
and Technology-II
Technology-I
Thermal Power Thermal Power
3 ME-313 3 1 0 4 3 ME-323 3 1 0 4
Engineering-I Engineering-II
Refrigeration and Air
4 ME-314 3 0 0 3 4 ME-324 Automobile Engineering 3 0 0 3
Conditioning
5 OET Open Elective-I 3 0 0 3 5 OET Open Elective-II 3 0 0 3
Manufacturing Manufacturing
6 ME-315 0 0 2 1 6 ME-325 0 0 2 1
Technology Lab-I Technology Lab-II
Thermal Engineering
7 ME-316 Thermal Engineering 0 0 2 1 7 ME-326 0 0 2 1
Lab-II / Automobile
Lab-I
Engineering Lab
Refrigeration and Air
8 ME-317 0 0 2 1 8 ME-329 Seminar 0 0 2 1
Conditioning Lab
Total Hours = 24 21 Total Hours = 24 21
Department of Mechanical Engineering, NIT Hamirpur Page 2 of 63

Fourth Year
7th Semester 8th Semester
Engineering Economics
1 ME-411 Operations Research 3 0 0 3 1 HS-404 3 0 0 3
& Accountancy
Computer Aided Computer Aided
2 ME-412 2 0 2 3 2 ME-421 2 0 2 3
Design Manufacturing
3 DET Professional Elective-I 3 0 0 3 3 DET Professional Elective-III 3 0 0 3
Professional Elective- Professional Elective-

4 DET 3 0 0 3 4 DET 3 0 0 3
II IV
Industrial Training
5 ME-418 0 0 2 1 5 ME-428 General Proficiency 0 0 0 1
Presentation
Major Project (Stage- Major Project
6 ME-419 0 0 12 6 6 ME-429 0 0 12 6
I) (Stage-II)
Total Hours = 27 19 Total Hours= 25 19
Semester Wise Credits

Semester 1st 2nd 3rd 4th 5th 6th 7th 8th Total
Credits 24 24 22 22 21 21 19 19 172
Hours/week 28 28 25 25 24 24 27 25 206

Professional Elective Courses
Professional Elective-I
ME-430 Finite Elements in Engineering

ME-431 Optimization Methods in Engineering
ME-432 Artificial Intelligence in Engineering
ME-433 Design and Analysis of Experiments
Professional Elective-II
ME-450 Advanced Mechanics of Solids
ME-451 Product Design and Development
ME-452 Industrial and Engine Tribology
ME-453 Condition Monitoring and Diagnostics
ME-454 Mechanics of Composite Materials
ME-455 Mechatronics and Robotics
Professional Elective-III
ME-440 Computer Integrated Manufacturing Systems
ME-441 Maintenance Engineering
ME-442 Supply Chain Management
ME-443 Total Quality Management
ME-444 Manufacturing of Non-Metallic Products
ME-445 Additive Manufacturing Technology
Professional Elective-IV
ME-460 Alternative Fuels Technology

ME-461 Renewable Sources of Energy
ME-462 Exergy Analysis of Thermal Systems
ME-463 Computational Fluid Dynamics
ME-464 Design of Heat Exchangers
ME-465 Design of Air Conditioners
Open Elective Courses
Open Elective-I
ME-370 Computer Aided Design

ME-371 Product Design and Development
Open Elective-II
ME-380 Mechatronics and Robotics

ME-381 Total Quality Management

Course Name: Organizational Behaviour
Course Code: HS-203
Course Type: Core
Contact Hours/Week: 3L Course Credits: 03
Course Objectives
 To impart knowledge about the behavioural aspects related to professional organizations
 To introduce the fundamental concepts relevant to understanding of individual & group behavior in the organization
 To enable the students to understand the applied organizational themes like perception, motivation, interpersonal relationships,
group dhynamics, leadership theories, role of power & politices in organizational context, conflict and negotiation, organizational
diversity, dynamics of personality, attitude and job satisfaction, etc.
Unit Number Course Content Lectures
UNIT-01 Organizational Behavior (OB): Concept, nature, characteristics, conceptual foundations, 04L
determinants and importance, management functions, role & skills, disciplines that contribute to
the field of OB, Challenges & Opportunities for OB, diversity in Organizations, attitudes & Job
satisfaction.
UNIT-02 Perception: Concept, nature, process, importance, management and behavioral applications of 08L
perception. Personality: concept, nature, types and theories of personality shaping. Learning;
concept and theories of learning.
UNIT-03 Motivation: concept, principles, theories-content, process & contemporary, Monetary and non- 06L
monetary motivation, applications of motivation. Leadership: Concept, functions, styles, and
theories of leadership- trait, behavioural, and situational.
UNIT-04 Group and Interpersonal Relationship: Analysis of Interpersonal Relationship, developing 05L
interpersonal relationship, Group Dynamic: Definition of Group, stages of Group Development,
Punctuated Equilibrium Model, Group Structure, Group Decision Making, understanding work
teams.
UNIT-05 Organizational Power and Politics: concept of power, structure of power, classification of 06L
power, contrasting leadership & power, dependence a key to power, causes & consequences of
political behaviour. Organizational conflict: view of conflict, conflict process, negotiation &
bargaining strategies.
UNIT-06 Conflict and Negotiation: conflict definition in conflict thought: Traditional view, the Human 07L
relation view, interactionist view. Functional versus dysfunctional conflict, conflict process.
Negotiation Bargaining strategies, the negotiation process and issues in negotiation.
Course Outcomes
Upon successful completion of the course, the students will be able to
CO1: Identify the challenges of the present organization
CO2: Describe the organizational system
CO3: Apply the principles of organizational behavior to inculcate the habit of team work and which is essential for the organization
CO4: Assess the role of psychological and social principal in improvement of efficiency as well as quality of empoyee life
Books and References
1. Organizational Behavior by Robbins, S.P., Prentice Hall of India.
2. Organizational Behavior by Luthans F., McGraw-Hill.
3. Human Behavior at Work: Organizational Behavior by Davis K., Tata McGraw-Hill.

Course Name: Kinematics of Machines
Course Code: ME-211
Course Type: Core
Contact Hours/Week: 3L + 1T Course Credits: 04
Course Objectives
 To impart concept and terminology associated with mechanisms and introduction to computer aided mechanisms.
 To understand velocity and acceleration diagrams for different mechanisms.
 To discuss the theory and underlying principles for different friction devices.
 To understand the theory of cam, follower, gears and gear trains.
Kinematic Analysis of Mechanisms
Kinematic Links , Kinematic Pairs , Constrained Motions, Degreeof Freedom Classification Of
UNIT-01 Kinematic Pairs , Kinematic Chain , Mechanism , Planar Mechanism , Grubler’s Criteria For 06L
Plane Mechanisms, Inversion Of Mechanism , Position Analysis , Spatial Mechanism .
Velocity And Acceleration In Mechanism

UNIT-02 Relative Velocity Method, Kennedy’s Theorem For Three Centers, Instantaneous Centre 09L
Method, Acceleration Diagram, Coriolis Component Of Acceleration, Klein’s Construction,
Computer aided analysis of mechanisms.
Friction Devices(Clutch , Belt, Rope , Chain ,Brakes And Dynamometer)
UNIT-03 Friction And Its Types (Pivot And Collar Friction, Uniform Wear And Uniform Pressure), Laws Of 06L
Friction, Introduction To Clutches, Belt Drives, Rope Drives, Chain Drives, Brakes And
Dynamometer.
Cams and Followers
UNIT-04 Classification Of Cams And Followers, Nomenclature, Types Of Follower Motion, Generation Of 06L
Cam Profile With Uniform Velocity, SHM, Uniform Acceleration And Retardation, Cycloidal
Motion Of The Follower, Cam Applications And Manufacturing.
Gears and Gear Trains
Types Of Gears : Terminology , Fundamental Law Of Gearing , Gear Profiles , Minimum Number
Of Teeth, Length And Arc Of Contact , Gear Trains: Simple , Compound ,Reverted And Epicyclic
UNIT-05 Gear Trains, Automotive Transmission Gear Trains, Differential, Overdrive. 09L
Automotive Transmission
Introduction To Continuously Variable Transmission (CVT), Types Of CVT’s.
Course Outcomes
CO1: Identify link, pair, chain, joints and inversions of mechanisms.
CO2: Construct the velocity and accelaration diagrams for diffferent mechanisms.
CO3: Understand the underlying theory and principles for various friction devices and their aplications.
CO4: Understand Cam profile generation and their applications
CO5: Learn the concept of gear and gear train and various automotive transmissions,
1. Theory of Machines by S.S Rattan, McGraw Hill
2. The Theory of Machines by Thomas Bevan, CBS Publishers & Distributors
3. Theory of Mechanisms and Machines by Jagdish Lal, Metropoliton Book Co. Pvt. Ltd
4. Theory of Machines and Mechanism by J.J Uicker, Oxford International

Course Name: Engineering Thermodynamics
Course Code: ME-212
Course Type: Core
Course Objectives
 To impart knowledge of basic concepts of thermodynamics and its laws and their applications for non-flow and flow
processes.
 To introduce the concepts of steam table, Mollier diagrams to determine properties of pure substances and mixture of gases.
 To analyse working of different types of cycles and their performance
Unit Course Content Lectures
Number
UNIT-01 Fundamental Concepts: Basic Concepts: Macroscopic and Microscopic viewpoints, Concept of 06L
Continuum, Thermodynamic equilibrium, Quasi-static Processes, Zeroth Law of Thermodynamics,
Energy, Types, Work and Heat, Point and Path function.
UNIT-02 Pure Substances: P-V-T- surfaces, Phase Transformations, Triple Point and Critical Point of Pure 09L
Substances, State Properties during Change of Phase, Dryness Fraction. Property Diagrams, Steam and
Refrigerant Tables, Mollier Charts, Various Thermodynamic Processes and Energy Transfer,
Measurement of Dryness Fraction.
Perfect Gas Laws: Equation of State, Specific and Universal Gas Constants, Deviations from Perfect
Gas Model, Compressibility Factor, Vander Waals Equation of State.
UNIT-03 First and Second Law of Thermodynamics: First Law of Thermodynamics for Flow and non-flow 12L
processes, Steady Flow Energy Equation and its applications, specific heat at constant pressure and
volume, Heat Engine, Heat pump, Refrigerator. Efficiency and COP. Second Law of Thermodynamics,
Kelvin Planck and Clausius Statements and their Equivalence/ Corollaries, PMM of Second kind,
Reversibility, Carnot Cycle, Thermodynamic temperature scale, Clausius Inequality, Entropy, Principle of
Entropy Increase, Exergy analysis, Introduction to Third Law of Thermodynamics.
UNIT-04 Mixtures of Perfect Gases: Mole Fraction, Mass fraction, Dalton‘s Law of Partial Pressure, Equivalent 06L
Gas Constant, Internal Energy, Enthalpy, Specific Heats and Entropy of Mixture of ideal Gases, Gibbs
and Helmholtz Functions, Maxwell Relations, Clapeyron Equation
UNIT-05 Power Cycles: Rankine Cycle, Otto, Diesel, Dual cycles, Thermal Efficiency, Mean Effective Pressures 03L
of Air Standard basis, Comparison of Cycles.
Course Outcomes
CO1: Analyse performance of Thermodynamic systems
CO2: Apply the laws of thermodynamics for non-flow and flow processes
CO3: Determine properties of pure substances and mixture of gases
CO4: Analyse the performance of various power cycles
CO5: Determine the available energy and its loss during a process
1. Engineering Thermodynamics by P. K. Nag,Tata McGraw-Hill.
2. Thermodynamics - An Engineering Approach by Yunus Cengel,Tata McGraw-Hill.
3. Engineering Thermodynamics by Van Wylen, Sonntag, John Wiley.
4. An introduction to Thermodynamics by Y. V. C. Rao, Universities Press, Hyderabad.

Course Name: Fluid Mechanics & Machinery
Course Code: ME-213
Course Type: Core
Course Objectives
 To impart basic concepts of fluid flow
 To introduce the concepts of Euler’s and Navier Stokes Equation of motions and their applications
 To impart method of determination of major and minor losses in pipes
 To enable understanding of performance of Hydraulic machines
Number
UNIT-01 Introduction to Fluid Mechanics:
Types of fluids, Continuum, Physical Properties of Fluids, Newton's Law of Viscosity, Rheology of fluids. Pressure
06L
variation in fluids, Manometers, Pressure Transducers, Forces on Plane and Curved Surfaces, Center of Pressure,
Stability of floating objects, Fluid masses Subjected to Linear Acceleration and Uniform Rotation About an Axis.
UNIT-02 Fluid Kinematics and Dynamics:
Stream line, Path line, Streak line and Stream tube, Classification of Flows, Differential Equation, Velocity and
Acceleration field, Derivation of Navier-Stokes equation and its application to simple flow cases. Euler’s Equation
of Motion along a Streamline and its integration, Bernoulli’s Equation and its Applications, Flow measurement 09L
using Pitot tube, Orifice, Venturimeter, Rotameter, Notches and Weirs, Integral Momentum Equation and its
Application to Pipe Bends etc. Dimensional Analysis, Buckingham’s Pi Theorem, Dimensionless Numbers and
their Physical Significance, Geometric, Kinematic and Dynamic Similarity, Similitude
UNIT-03 Laminar and Turbulent Flows:
Equation of Motion for Laminar Flow through Pipes, Hagen Poiseuille Flow, Stokes Law, Transition from Laminar
to Turbulent Flow, Types of Turbulent Flow, Scale and Intensity of Turbulence, Eddy Viscosity, Prandtl’s Mixing
06L
Length Theory, Velocity Distribution in Turbulent Flow, Major and Minor Losses, Moody’s Diagram, Pipe in Series
and Parallel, Pipe Network.
Concept of boundary layer, Equations and Approximate Integral Analysis
Hydraulic Machines: Hydrodynamic Force of Jets on Stationary and Moving Flat, Inclined Vanes, Curved Vanes,
Velocity Diagrams, Energy transfer, Degree of Reaction, Work Done and Efficiency, Classification of Turbines and
Pumps, Similarity Laws and Specific Speed, Cavitation, Heads and Efficiencies, Impulse and Reaction Turbines,
Pelton Wheel, Francis Turbine and Kaplan Turbine, Work done, Performance Characteristic Curves, Draft Tube
UNIT-04
Theory. 15L
Centrifugal Machines: Classification, Head Losses and Efficiencies, Specific Speed, Slip, Performance
Characteristic Curves, NPSH.
Reciprocating Pumps: Working, Discharge, Indicator Diagrams.
Course Outcomes
CO1: Analyse forces on partially or fully submerged bodies
CO2: Analyse laminar and turbulent flow
CO3: Understand the Boundary Layer concepts and Flow through pipes
CO4: Evaluate performance and draw characteristic curves of hydraulic machines
1. Fluid mechanics by Yunus A. Cengel and John M. Cimbala, McGraw Hill.
2. Fluid Mechanics and by F. M. White, McGraw Hill.
3. Fluid Mechanics and Fluid Power Engineering by D.S. Kumar, Kotaria & Sons.
4. A Text Book of Fluid Mechanics and Hydraulic Machines by K. Subramanya, McGraw Hill.

Course Name: Metrology and Measurement
Course Code: ME-214
Course Type: Core
Course Objectives
 To impart knowledge about different types of measurement methods
 To introduce different measuring techniques for identifying behavior of the systems
 To understand the different principles of metrology and measurement.
UNIT-01 Introduction: Concept and Need of Measurements, Generalized measuring systems and 06L
instruments, Classification of methods of measurement, Standards, Units, Precision and Accuracy,
Repeatability and Reproducibility, Sensitivity, and Readability, Sources of error in measurement,
Statistical analysis of Error, Correction, Calibration and Interchangeability.
UNIT-02 Linear and Angular Measurement: Standards of Linear Measurement, Line and End Standards, 03L
Linear Measuring Instruments: Vernier Caliper and Micrometers, Vernier Height Gauge and Depth
Gauge, Interval Measurement: Slip Gauges, Optical Flats Comparators: Mechanical, Electrical,
Optical, and Pneumatics, Angle Measuring Instruments: Sine Bar, Bevel Protractor, Clinometer,
Autocollimator, Functions of Coordinate Measuring Machine.
UNIT-03 Measurements of Geometric Forms and Finish: Form Measurement: Measurements of 06L
Straightness, Squareness, Flatness, Circularity and Cylindricity, Optical Projectors, Tool Maker's
Microscope, Optical Measuring Microscope, Finish Measurement: Quantitative Evaluation of Surface
Roughness, Methods of Measuring Surface Finish by Contact and Non-Contact Methods
UNIT-04 Measurement of Threads and Gears: Threads Measurement: Standard Threads Profiles and 03L
Measurement of Minor Diameter, Major Diameter, Effective Diameter, Pitch, Angle and Form for
Internal and External Threats, Threads Gauges, Gear Measurement: Standard Gear Profiles and
Measurement of Tooth Thickness and Pitch, Checking Profile of Spur Gear, Parkinson Gear Tester,
Problems on Gear Measurement
UNIT-05 Systems of Limits and Fits: Concept of Tolerances, Limits and Fits, Allowances, Tolerance 06L
Analysis, Limits Gauges and Gauges Design.
UNIT-06 Measurement of Displacement, Speed, Force, And Torque:Tachometers and Stroboscope, 06L
Accelerometer, Proving Ring, Load Cells: Hydraulic and Pneumatic, Torque Measurement on
Rotating Shafts Dynamometers: Absorption, Transmission and Driving
UNIT-07 Measurement of Pressure, Flow, Temperature and Strain: Bourdon Tube, Diaphragm and 06L
Bellows, Vacuum Measurement: Mcleodguage, Thermal Conductivity Gauge and Ionization Gauge,
Dead Weight Gauge Tester, Electromagnetic Flux Meters, Ultra-Sonic Flow Meters and Hot Wire
Anemometer, Flow Visualization Techniques, Temperature Measurement by Thermometers,
Bimetallic, Thermocouples, Thermistors and Pyrometers, Measurement of Flow, Strain Measurement.
Course Outcomes
CO1: Understand the role of different measurements techniques
CO2: To analyze and measure different physical parameters using modern measurement methods
1. Engineering Metrology and Measurements by N.V. Raghavendra and L.Krishnamurthy, Oxford University Press.
2. Engineering Metrology by R.K. Jain, Khanna Publisher.
3. Mechanical Measurements by Backwith, Marangoni and Lienhard Pearson Education.
4. A text book of Measurement and Metrology by A.K. Sawhney, and M. Mahajan Dhanpat Rai & Co.

Course Name: Fluid Mechanics & Machinery Lab
Course Code: ME-215
Course Type: Core
Contact Hours/ Week: 2P Course Credits: 01
Course Objectives
 To gain practical knowledge by applying the experimental methods to correlate with theory
 To learn the usage of instruments for various measurements
 Apply analytical techniques and graphical analysis to experimental data
List of Experiments
1. To find the metacentric height of the floating body.
2. To determine co-efficient of discharge (Cd) of Orifice/Venturimeter.
3. To determine the co-efficient of discharge (Cd) of the given rectangular/V notch.
4. To verify Bernoulli’s theorem using Venturimeter.
5. To find the friction loss and frictional factor of given pipe lines.
6. To study the inception and growth of Cavitation.
7. To study the impact of Jets on Vanes.
8. To study the characteristics of a Pelton Turbine.
9. To study the characteristics of a Francis Turbine.
10. To study the characteristics of a Kaplan Turbine.
11. To study the characteristics of a Centrifugal Pump.
12. To study the characteristics of a Reciprocating Pump.
Course Outcomes
CO1: Able to explain the effect of fluid properties on a flow system.

CO2: Able to identify type of fluid flow patterns and describe continuity equation.
CO3: To analyze a variety of practical fluid flow and measuring devices.
CO4: To select and analyze an appropriate turbine with reference to given situation in power plants.
CO5: To estimate performance parameters of a given Centrifugal and Reciprocating pump.

Course Name: Metrology and Measurement Lab
Course Code: ME-216
Course Type: Core
Course Objectives
 To gain practical knowledge about different types of measuring systems
 To acquire the knowledge about different physical parameters measurement.
 learn the usage of different measurement principles
List of Experiments
1. Study of different types of gauges (Vernier caliper, Vernier Height gauge, Vernier depth gauge, Micrometer, filler gauge
go-nogo gauge, plug gauge, go-nogo snap gauge bourdon tube pressure gauge),
2. Calibrations of linear measuring instruments by using slip gauges and calculation of percentage error.
3. Measurement of included angle of a given specimen using Sine Bar and Clinometers.
4. Measurement of diameter of small size hole using Tool Maker’s Microscope.
5. Measurement of pitch diameter of a screw thread by vertical Profile Projector
6. Determination of RPM and Torque of a given motor using RPM Measurement Tutor and calculation of percentage error.
7. Determination of velocity of given velocity transducer (Magnetic sensor UGM3140) using velocity Tutor and calculation of
percentage error.
8. Measurement of Temperature of a given sample using Temperature Measurement Tutor and calculation of
percentage error.
9. Calibration of pressure gauge using Dead Weight Tester.
10. Measurement of strain of a given metallic strip using Strain Measurement Tutor.
Course Outcomes
CO1: Evaluate the phenomenon of measurements system
CO2: Understand and analyze measurement techniques
CO3: Use different systems and instruments to measuring parameters with precision
CO4: Develop basic concept of the various comparators and interference

Course Name: Machine Drawing Lab
Course Code: ME-217
Course Type: Core
Course Objectives
 To gain knowledge about drawings of different machine components.
 To get familiarized with standards, conventions of machine drawing.
 To learn and visualize the assembly of different machine elements.
List of Experiments
1. Preparation of drawing sheet related to Limits, Fits and Tolerances.

2. Preparation of drawing sheet related to Rivets and Riveted joints.
3. Preparation of drawing sheet related to Welds and Welded joints.
4. Preparation of drawing sheet related to Screw Threads and Threaded fasteners.
5. Preparation of drawing sheet related to Keys, Cotters and Shaft Joints.
6. Preparation of drawing sheet related to Shaft Couplings.
7. Preparation of drawing sheet related to Assembly of Plummer Block.
8. Preparation of drawing sheet related to Assembly of Foot Step Bearing
9. Preparation of drawing sheet related to Assembly of Screw Jack.
10. Preparation of drawing sheet related to Assembly of Connecting Rod.
11. Preparation of drawing sheet related to Assembly of Crane Hook.
12. Preparation of drawing sheet related to Assembly of Lathe Tailstock.
Course Outcomes
CO1: Understand the concept of machine elements and their drawings.

CO2: Learn the standard conventions and notations for machine drawings.
CO3: Visualize different machine elements and draw their different views.
CO4: Learn basic concept of assembly drawing.

Course Name: Engineering Mathematics-III
Course Code: MA-203
Course Type: Core
Course Objectives
 To introduce the fundamental concepts relevant to function of complex variable, numerical differentiation and integration and
numerical solution of linear, non-linear and system of equations.
 To have the idea of evaluation of real integrals using complex variable.
 To understand the concept of approximating & interpolating polynomials and finding values of function at arbitrary point.
 To impart knowledge of various numerical technique to solve ODE.
UNIT-01 Functions of Complex Variable 12 L
Applications of De Moivre’s theorem, Exponential, Circular, Hyperbolic and Logarithmic functions
of a complex variable, Inverse Hyperbolic functions, Real and imaginary parts of Circular and
Hyperbolic functions, Summation of the series-‘C+iS’ method.
Limit and derivative of complex functions, Cauchy-Riemann equations, Analytic functions and its
applications, Complex integration, Cauchy’s theorem, Cauchy’s integral formula, Series of
complex function, Taylor series, singularities and Laurent’s series, Cauchy’s residue theorem
and its application for the evaluation of real definite integrals.
UNIT-02 Interpolation 06L
Least square curve fit and trigonometric approximations, Finite differences and difference
operators, Newton’s interpolation formulae, Gauss forward and backward formulae, Sterling and
Bessel's formulae, Lagrange's interpolation.
UNIT-03 Numerical Integration 05L
Integration by trapezoidal and Simpson’s rules 1/3 and 3/8 rule, Romberg integration, and
Gaussian quadrature rule, Numerical integration of function of two variables.
UNIT-04 Numerical Solution of Ordinary Differential Equations 07L
Taylor series method, Picard’s method, Euler’s method, Modified Euler’s method, Runge‐ Kutta
method. Predictor corrector methods, Adam Bashforth and Milnes method, convergence criteria,
Finite difference method.
UNIT-05 Numerical Solution of Linear and Non Linear Equations 06 L
Non Linear Equations: Bisection Method, Regula Falsi Method, Newton-Raphson Method,
Iteration method.
Linear Equations: Jacobi and Gauss Seidel Iteration methods, Relaxation method.
36 L
Course Outcomes
Upon successful completion of the course, the student will be able to:
CO1: Understand and analyze the concept of Numerical Solution of Linear and Non Linear Equations, Ordinary Differential Equations
and Function of complex variable.
CO2: Identify an appropriate technique to solve the linear, non-linear equations, ordinary differential equations.
CO3: Formulate the problems on related topics and solve analytically.
CO4: Apply the concepts of linear, non-linear equations, differential equations and complex analysis in various engineering problems.
CO5: Demonstrate the concepts through examples and applications.
1. Complex variables and Applications by R. V. Churchill, J. W. Brown & R. F. Verhey, McGraw Hill.
2. A first course in complex analysis with applications by Dennis G. Zill & P. D. Shanahan, Jones and Bartlett.
3. Numerical Methods for Scientific and Engineering Computation by M. K. Jain, S. R. K. Iyenger and R. K. Jain, New Age
International Publishers, New Delhi
4. Numerical Methods for Engineers and Scientists (2nd Ed.) by J D Hoffman, CRC Press.
5. Numerical Analysis Mathematics and Scientific computing (3rd ed.) by D. Kincaid and W. Cheney, American Mathematical Society.

Course Name: Dynamics of Machines
Course Code: ME-221
Course Type: Core
Course Objectives
 To introducethe fundamentals of force analysis in mechanisms
 To impart knowledge on balancing of machines
 To enablethe students to understand the need of flywheels and governors
 To acquaint the students with the role of frictional devices in various applications
 To make the students conversant with fundamentals of vibration and noise
UNIT-01 Dynamic Analysis of Mechanisms: Force Analysis of Mechanisms, D-Alembert’sPrinciple,
Dynamics of Rigid Link in Plane Motion, Dynamic Force Analysis of Planar Mechanisms,
06L
Velocity and Acceleration Analysis of Plane Mechanisms, Turning Moment diagram forEngine
and Speed Fluctuation, Flywheel.
UNIT-02 Balancing of Bodies: Balancing of Rotating Masses in One Plane and in Different Parallel
Planes, Graphical and Analytical Methods, Balancing of Rotors, Balancing of Reciprocating
Masses, Balancingof Single Cylinder Engine, Balancing of Multi Cylinder Inline Engines, 09L
Balancing of V-Engine, and Radial Engines, Firing Order.
UNIT-03 Flywheel and Governors: Introduction to Turning Moment Diagrams, Flywheel, Coefficient of
Fluctuation, Energy stored in Flywheel, Different Types of Governors,characteristics, Gravity
Controlled and Spring Controlled Governors, Hunting of Governors, Controlling Force Curves,
09L
Sensitivity, Stability, Coefficient of Insensitiveness
UNIT-04 Gyroscopic Motion: Gyroscopes, Angular Velocity, Acceleration and Torque on Disc,
Gyroscopic Forces and Couples, Gyroscopic Stabilization of Ship, Plane Stabilization, Stability 06L
of Four Wheel and Two Wheel Vehicles Moving on Curved Path
UNIT-05 Mechanical Vibration: Vibrations in Mechanical Systems, Types, Free, Damped and Forced
Vibrations of Single Degree of Freedom System, Transverse Vibration of Shafts, Critical Speed
of Shaft, Damped, Under damped, Critically Damped and Overdamped Systems, Vibration
Transmission and Isolation,Determination of Natural Frequency,Basics of Vibrations in Two 06L
Degrees of Freedom System, Forced Vibrations with Harmonic Excitation, Resonance, Whirling
of Shafts and Critical Speed. Vibration Measuring Instruments, Effects and Remedies of
Vibration.
Course Outcomes
CO1: Identify the problems associated with unbalance in machines.
CO2: Realize the requirement of frictional devices.
CO3: Identify the type of governors most suited for various applications.
CO4: Understand the challenges posed by vibration.
1. The Theory of Machines by Thomas Bevan, CBS Publishers & Distributors.
2. Theory of Machines by S. S. Rattan, TMH Publication.
3. Mechanism and Machine Theory by J.S.Rao and R.V.Dukipatti, New Age International.
4. Mechanical Vibrations and Noise Engineering by Ambekar, PHI.

Course Name: Heat and Mass Transfer
Course Code: ME-222
Course Type: Core
Course Objectives
 To introducethe fundamentals of heat transfer mechanisms in fluids and solids and their applications in various heat transfer
equipment in process industries.
 To introducethe thermal analysis and sizing of heat exchangers.
 To enable the basic concepts of mass transfer.
UNIT-01 Conduction Heat Transfer: One- Dimensional Steady State Heat Conduction Equation for Slab, 09L
Cylinder, Sphere and Composite Medium (With and Without Heat Generation), Critical Thickness of
Insulation, Extended Surface Heat Transfer, 2-D Steady State Conduction, Fourier General
Conduction Equation in 3-D, Unsteady Heat Conduction, Semi-infinite Wall with Convection Boundary
Condition, Use of Heisler Charts.
UNIT-02 Convection Heat Transfer: Application of Dimensional Analysis to Free and Forced 09L
Convection, Concept of Hydrodynamic and Thermal Boundary Layer, Similarity Conditions of
Heat Transfer Processes, Equations of Motion and Energy, Laminar Boundary Analysis on Flat
Plate, Fully Developed Heat Transfer Through Smooth Pipes, Laminar Free Convection on a
Vertical Flat Plate, Empirical Correlations, Reynold`sAnalogy, Heat Transfer in Boiling and
Condensation.
UNIT-03 Radiation Heat Transfer: Nature of Thermal Radiation, RadiativeProperties, Stefan Boltzmann’s 09L
Law, Kirchhoff’s Law, Wien’s Law, Plank’s Law etc. Black, Grey and Real Surfaces, Radiation Heat
Transfer Between Black/Grey Surfaces, Network Method of Solving Radiation Problems, Concept of
View Factor and Shape Factor, Heat Transfer in the Presence of Reradiating Surface.
UNIT-04 Heat Exchangers: Basic Types of Heat Exchanger, Fouling Factor, Overall Heat Transfer Co- 06L
efficient, LMTD, Effectiveness, NTU, Method of Design of Single and Multiple Pass Heat
Exchangers.
UNIT-05 Mass Transfer: Introduction to Mass Transfer Operations, Molecular Diffusion in Gases, Liquids 03L
and Solids, Eddy Diffusion, Concept of Mass Transfer Coefficients, Theories of Mass Transfer,
Different Transport Analogies, Application of Correlations for Mass Transfer Coefficients, Inter
Phase Mass Transfer, Relationship between Individual and Overall Mass Transfer Coefficients.
Course Outcomes
CO1: Understand and solve conduction, convection and radiation problems.Formulate and solve complex AC and DC circuits
CO2: Design and analyze the performance of heat exchangers.
CO3: Relate the skill of mass transfer and its applications.
1. Heat Transfer by J.P. Holman, Tata McGraw-Hill.
2. Fundamentals of Heat and Mass Transfer by F.P. Incropera, and D.P. Dewitt, John Wiley.
3. Heat Transfer - A Basic Approach by M.N. Ozisik, McGraw-Hill.
4. Heat Transfer - A Practical Approach by Y.A. Cengel, McGraw-Hill.

Course Name: Mechanics of Solids
Course Code: ME-223
Course Type: Core
Course Objectives
 To impart concept of stress, strain, elastic constants and Mohr’s Circle.
 To introduce the theory of shear force, bending moment, slope and deflection of beams.
 To enable the students to learn the theory of cloumns,struts and pressure vessels.
Unit-01 Analysis of Stress and Strain
State of Stress, Equality of Cross Shear, Stress Invariants, Principal Planes, Cauchy’s Stress
Quadric, Introduction to Strain and Rectangular Strain Components, State of Strain at Point, 06L
Cubical Dilatation, Compatibility Conditions, Relationship between Elastic Constants, Thermal
Stress & Strain, Stress due to Uniaxial and Biaxial Loads, Stress Induced by State of Pure
Shear, Mohr’s Circle and its Construction.
Unit-02 Shear Force and Bending Moment Diagrams
Introduction, Types of Load, Concentrated, Uniformly Distributed, Uniformly Varying Load and
Combination of Loads,Types of Beams, Cantilever Beam, Simply Supported Beam, 06L
Overhanging Beam, Shear Force and Bending Moment Diagrams for Combination of loads,
Point of Inflexion.
Unit-03 Slope and Deflection of Beams
Review of Bending Theory, Relationship Between Slope, Deflection and Radius of Curvature,
09L
Slope and Deflection of Various Types of Beams with Various Loadings by Macaulay’s Method,
Double Integration Method And Moment Area Method.
Unit-04 Theory of Columns and Struts
Types of Columns, Failure of Column, Euler’s Column Theory, Slenderness Ratio, End
Conditions for Long Columns, Equivalent Length of Columns, Limitation of Euler’s Formula, 06L
Factor of Safety, Empirical Relations-Rankine’s Straight Line and Johnson’s Parabolic
Formula.
Unit-05 Theory of Thin and Thick Pressure Vessels
Thin cylinders subjected to Internal Pressures, Hoops Stress, Longitudinal Stress in a Cylinder,
Stresses in Thick Shells, Longitudinal and Shear Stresses, Distribution of Stresses Across the 06L
Shell Thickness, Cylindrical Shell Subject to Both Internal and External Fluid Pressure,
Compound Cylinders.
Unit-06 Theories of Failure
Introduction to theories of failure, Graphical representation of theories of Elastic Failure and 03L
significance, Application of theories of elastic failure. Utility of factor of safety in design.
Course Outcomes
Upon Successful Completion of The Course, The Students Will Be Able To
CO1: Understand the concept of stress, strain, and relations between elastic constants.
CO2: Understand The Concept of Mohr’s circle and its construction.
CO3: Understand the theory of shear force, bending moment and its construction.
CO4: Learn the underlying theory of slope and deflection of beams and failure of columns and struts.
CO5: Understand the different stresses and strains in thin and thick pressure vessels.
1. Strength of Materials by Timoshenko, Mcgraw Hill.
2. Mechanics of Materials by E.J. Hearn, Butterworth-Heinemann.
3. Mechanics of Materials by Beer & Johnston, Mcgraw Hill.
4. Advanced Mechanics of Solids by L.S Srinath, Mcgraw Hill.

Course Name: Industrial Engineering
Course Code: ME-224
Course Type: Core
Course Objectives
 To enable the students to identify, formulate, and solve complex engineering problems by applying principles of engineering, science, and mathematics
 To impartan ability to identify, formulate, and solve engineering problems
 To introduce the importance of various industrial functions such as forecasting, product design, inventory control, sales and quality etc in an
organization.
UNIT-01 Introduction: Concept of Industrial Engineering; Functions of Industrial Engineering; Role of Industrial Engineering in the plant; 03L
Concept of Productivity, Productivity measures, Productivity measurement models, Principles and types of Organization—Line,
functional, line and staff; Organization Chart.
UNIT-02 Facilities System Design: Production System Facilities, Concept and factors governing plant location, locational economics, 06L
Types of plant layout-Process, Product, Combination, fixed position, methods of plant and factory layout, Functions and
principles of material handling, relationship to plant layout, selection of material handling equipment, Types of material handling
equipment. Concept and importance of Line balancing, Line balancing heuristics.
UNIT 3 Work System Design: Concept of Work Study, Techniques of Work Study, Scope & Procedure of Method Study; Elements of 06L
Method Design; Flow Process Chart, Flow Diagram; String Diagram, Multiple Activity Charts; Work Sampling; Objectives of
Work Measurement, Basic Procedure of Time Study; Standard time, Job evaluation and Merit rating.
UNIT-04 Production Planning and Control: Definition of PPC, Concept of production planning and production control, objectives and 06L
functions of PPC, Comparison among production planning and production control, Information requirement for PPC, methods
of sales forecasting, Forecasting of new and established products, Functions of PPC: Routing, Scheduling, Sequencing,
master scheduling, machine loading, dispatching: centralized and decentralized dispatching, progress reporting, corrective
actions.
UNIT-05 Product Development and Design :Concept of product development and design; Product life cycle, steps of new product 06L
development, product design considerations; standardization, simplification and specialization; ergonomic considerations in
product design; product cost considerations, Design for manufacturing (DFM), Concurrent Engineering, Concept of Break-Even
analysis, Calculations of Break-Even Points, Advantages, and Application of Break-Even analysis
UNIT-06 Quality and Reliability Engineering: Introduction and definition of quality, Quality of Design, Quality of Performance and 06L
quality of Conformance, Difference between Inspection and Quality Control, Customer Orientation: Internal & External
Customer Concept, Life cycle approach to quality cost- Prevention; Appraisal and Failure costs (PAF model). Seven QC tools
(Histogram, Check sheets, Ishikawa diagrams, Pareto, Scatter diagrams, Control charts). Reliability evaluation, Maintainability,
and availability concepts.
UNIT07 Latest Tools of Industrial Engineering : Material requirement planning, Enterprise resource planning, JIT Production System; 03L
TQM, Bench marking; ISO standards ; Supply chain Management, Business Process Reengineering, Industry 4.0
Course Outcomes
CO1: Ability to design, develop, implement and improve integrated systems that include people, materials, information,
equipment, and people
CO2: Use the techniques, skills, and modern engineering tools necessary for engineering practice.
CO3: Design and conduct experiments, as well as to analyze and interpret data.
Books and References:
1. Production Planning & Inventory Control by Narsimhan, PHI.
2. Production and Operations Management by Adam Ebert, Pearson.
3. Industrial Engineering and Management by Ravi Shankar, Galgotia Publication.
4. Modern Production/Operation Management by Buffa, Wiley.

Course Name: Material Testing Lab
Course Code: ME-225
Course Type: Core
Course Objectives
 To gain practical knowledge about properties and testing of materials
 To acquire the knowledge and operating skills about different testing machines and setups.
 To learn the principles and methodology involved in testing of materials.
List of Experiments
1. To find Young’s Modulus of a given bar (brass) using Deflection Beam Apparatus.
2. To find the value of Young’s Modulus of a given wire using Searl’s Apparatus.
3. To determine the Stiffness of Spring using Dead Weight and elongation method.
4. Study of Universal Testing Machine and to perform Tensile Test.
5. To perform compression test on Universal Testing Machine.
6. To determine the Shear strength of a given specimen on Universal Testing Machine.
7. To conduct torsion test of a given specimen for determination of Modulus of Rigidity using Torsion Testing Machine.
8. Study of Impact Testing Machine and to perform Izod Test to find the Impact strength of the given specimen
9. Study of Brinell Hardness Testing Machine and to find out Brinell Hardness Number (HBN) of the given specimen
10. Study of Rockwell Hardness Testing Machine and to find out Rockwell Hardness Number (HR) of the given
specimen.
11. To measure the stress and strain using strain gauges mounted on cantilever beam.
12. To perform Bending Test on Cantilever Beam set up and calculate the Bending Stress.
Course Outcomes
CO1: Understand the methodology of testing and measurements of different properties of materials.
CO2: Understand and analyze principles and techniques of testing.
CO3: Develop skills on different machines and instruments to measuring properties of materials.

Course Name: Heat and Mass Transfer Lab
Course Code: ME-226
Course Type: Core
Course Objectives
 To gain practical knowledge by conducting experiments to correlate with the theory.
 To enable the student to apply conduction, convection and radiation heat transfer concepts to practical applications.
List of Experiments
1. To determine the thermal conductivity of lagging material and plot the temperature distribution across the lagged pipe.
2. To determine the thermal conductivity of guarded hot plate and verify the results.
3. To determine the thermal conductivity of insulating powder and verify the results.
4. To determine the convection heat transfer coefficient for a vertical tube losing heat by natural convection and verify the
results.
5. To determine the convection heat transfer coefficient for a pipe losing heat by forced convection to air and plot the
graph between Re and Nu. Verify the results.
6. To draw the temperature distribution plot along the length of a pin/fin in natural and forced convection and find heat
transfer coefficient and verify the result.
7. To determine the Stefan Boltzmann constant.
8. To determine the overall heat transfer coefficient &effectiveness for a tube type heat exchanger for parallel & counter
flow.
9. To determine the heat transfer rate and effectiveness of shell & tube heat exchanger in co-current mode.
10. To determine the heat transfer rate and effectiveness of shell & tube heat exchanger in counter current mode.
11. To determine the heat transfer rate and effectiveness of double pipe heat exchanger in co-current mode.
12. To determine the heat transfer rate and effectiveness of double pipe heat exchanger in counter current mode.
Course Outcomes
CO1: Understand the basic laws of heat transfer

CO2: Understand the fundamentals of convective heat transfer process.
CO3: Evaluate heat transfer coefficients for natural and forced convection.
CO4: Analyze heat exchanger performance by using the method of heat exchanger effectiveness.

Course Name: Kinematics and Dynamics of Machines Lab
Course Code: ME-227
Course Type: Core
Course Objectives
 To gain practical knowledge about kinematics of machine components.
 To acquire the operating skills and principles about different test setups.
 To learn the simulation methodology involved in virtual laboratory.
List of Experiments
1. To study various types of Links, Pairs, Chains and Mechanisms.

2. To study inversion of Four Bar Mechanism, Single Slider Crank Chain Mechanism and Double Slider Crank
Chain Mechanism.
3. To study various types of Cam and Follower arrangement.
4. To plot follower displacement vs. cam rotation graph for various cam follower arrangement.
5. To study various types of Gears – Spur, Helical, Worm and Bevel Gear.
6. Analyze and verify experimentally the gear ratio of a gear box.
7. To Analyze and verify experimentally the motion of epicyclic gear trains.
8. To determine performance characteristic curves of Porter and Hartnell governor and to find its stability and sensitivity.
9. To determine gyroscopic couple and verify gyroscopic effect on motorized gyroscope.
10. To determine the unbalanced couple and forces for rotating parts.
11. Virtual Laboratory: Mechanism

a. Quick Return Mechanism.
b. Oldham Coupling Mechanism.
c. Grashof's 4 bar Mechanism.
12.Virtual Laboratory: Vibrations

a. Simple Harmonic Oscillator.
b. Damped Harmonic Oscillator.
c. Moment of Inertia of Connecting Rod.
Course Outcomes
CO1: Understand the methodology of measurements of various kinematic parameters of machine elements.
CO2: Understand, analyze and verify the principle involved in working of machine elements.
CO3: Develop skills on virtual lab for analysis of machine elements.

Course Name: Machine Design - I
Course Code: ME-311
Course Type: Core
Course Objectives
 To impart fundamental knowledge of design principles in context of Mechanical Engineering.
 To introduce procedures of machine design and develop an ability to apply it.
 To capacitate so as to identify, formulate and solve problems based on design and analysis.
UNIT-01 Introduction: 09L
Engineering Design, Phases of Design, Design Considerations, Theories of Failure, Factor of
Safety, Design against Static Load, Design against dynamic load, Design for X: Manufacturing
and Assembly,Quality and Reliability, Aesthetic and Ergonomics.
UNIT-02 Design of Shafts and Couplings 06L
Design of Solid and Hollow Shafts, Design of Shafts for Strength and Deflection, Combined
Loading due to Torsion and Bending of Shafts, Principal Stress and Maximum Stress, Equivalent
Bending Moment and Twisting Moment, Design of Muff Coupling, Rigid Flange Coupling,
Bushed Pin Flexible Coupling.
UNIT-03 Design of Joints 09L
Pins, Keys, Splines, Knuckle Joint, Cotter Joint, Design of Threaded Joints, Initial Tension,
Riveted Joints, Joints for Pressure Vessels, Welded Joints: Types.
UNIT-04 Design of Springs 06L
Closed and Open Coiled Springs, Strength and Stiffness, Optimum Design of Helical Springs,
Helical Torsion Springs, Multi-leaf Springs, and Helical Springs of Non-Circular Wires.
UNIT-05 Design of I.C Engine Elements 06L
I C Engine Parts: Cylinder, Piston, Connecting Rod and Crankshaft, Mechanism of Valve Gear
and its Design.
Course Outcomes
CO1: Acquire expertise in designing various machine elements exposed to static, dynamic loads.
CO2: Acquire ability to design IC engine elements.
CO3: Develop skills for applying failure theories.
1. Machine Design by Shigley, McGraw Hill.
2. Design of Machine Elements by V.B. Bhandari, McGraw Hill.
3. Machine Design by R.L Norton, Pearson Education.
4. Machine Design by Sharma &Aggarwal,Kataria and Sons.
5. Design data Book by Kalaikathir Achagam, PSG College Coimbatore.

Course Name: Manufacturing Science and Technology-I
Course Code: ME-312
Course Type: Core
Contact Hours/Week: 3L + 1 T Course Credits: 04
Course Objectives:
 To impart knowledge about the different processes, materials and systems in manufacturing.
 To introduce the fundamental concepts of metal casting, powder metallurgy, metal forming and atomic joining.
 To enable the students to understand about the different types of defects in casting, rolling, forging, drawing extrusion and welding.
Number
UNIT-01 Introduction: Concept of Manufacturing- Processes in Manufacturing, Materials in Manufacturing, Systems in 03L
Manufacturing.
Metal Casting Processes: Need and Classification, Expendable Green Sand Mould Casting, Composition, Preparation,
UNIT-02 Properties and Testing of Green Sand, Materials, Allowances and Types of Patterns, Cores, Core Prints and Chaplets, Moulding
Methods, Gating Design, Cooling and Solidification: Mechanism and Rate, Riser Design and Placement, Expendable Precision
Sand Mould Castings: Shell Mould, Vacuum Mould and CO2 Mould, Investment Casting and Evaporative Casting, Expendable
Plaster Mould and Ceramic Mould Casting, Permanent Metal Mould Casting: Gravity and Pressure Die Casting, Vacuum and 09L
Slush Casting, Special Metal Casting Processes: Centrifugal, Continuous, Squeeze and Chilled Casting, Casting Defects and
Inspection of Casting.
UNIT-03 Powder Metallurgy Processes: Production of Metal Powders, Blending and/or Mixing, Compacting and Sintering, Hot Isostatic
Pressing (HIP), Powder Injection Moulding (PIM), and Electro-Spark Pressing (ESP). 03L
Metal Forming Processes: Bulk Metal Forming Processes: Need and Classification, Yielding and Flowing of Metal,
UNIT-04 Temperature, Friction and Lubrication, Rolling: Classification, Process Geometry and Analysis using Slab Method for Load
and Power, Rolling mills and Roll pass design, Defects, Forging: Classification, Process Geometry and Analysis of Strip
and Disc forging using slab method for Load and Power, Defects, Drawing: Process Geometry and Analysis using slab
method for Load and Power, Maximum Reduction, Defects, Extrusion: Classification, Process Geometry and Analysis of
Rod Extrusion using slab method for Load and Power, Maximum Reduction, Defects, Sheet Metal Forming Processes: 15L
Need and classification, Blank Preparation by Sheet Metal Cutting, Press Forming: Bending and Drawing- Process
Geometry and Calculation for Force and Power, Impulse Forming: Explosive forming, Electro-hydraulic forming and Electro-
magnetic forming, Laser forming.
Atomic Joinig Processes: Need and Classifications, Solid Welding: Diffusion, Friction, Forge and Roll Welding, Explosive
UNIT-05 and Ultrasonic Welding, Resistance Welding: Spot, Projection and Seam, Resistant Butt and Flash Butt, High Frequency
Resistance and High Frequency Induction, Arc Welding: Non-consumable electrode: CAW, GTAW, PAW and Consumable
electrode: SMAW and GMAW, SAW and ESW; Gas Welding: Oxy Acetylene and Oxy Hydrogen, Thermit Welding, Beam
Welding: LBW and EBW, Welding Defects and Inspection, Special Welding Applications: Heavy Engineering, Oil and Gas 06L
Industries, Nuclear Power, Automotive Industries, Ship Building and Aerospace Industries, Brazing and Soldering
Processes.
Course Outcomes:
CO1: Identify the process requirements to manufacture a specific product by casting, powder metallurgy and metal forming processes.
CO2: Describe the effects of various parameters on the quality of the product produced.
CO3: Apply principles of solidification, sintering and yielding in the production of any product.
CO4: Assess the quality of joints made by different types of welding operations.
1. Fundamentals of Modern Manufacturing: Materials Processes and Systems by M. P. Groover, John Wiley and Sons.
2. Manufacturing Science by Ghosh and Mallik, East West Press.
3. Principles of Metal Casting by Richard W. Heine, Tata Mc Graw Hill.
4. Fundamentals of Metal Forming Processes by Juneja, New Age International.
5. Welding Processes and Technology by R.S. Parmar, ‎Khanna Publishers.

Course Name: Thermal Power Engineering-I
Course Code: ME-313
Course Type: Core
Course Objectives
 To understand working principles of Steam Turbine.
 To introduce principles of the conversion of fossil fuel energy to useful power.
 To understand various theoretical concepts related to compressible flow.
UNIT-01 Vapour Power Cycles
Review of Vapour Power Cycles, Rankine Cycle with Reheat,Regeneration, Bleeding of Steam, 06L
Binary Vapour Cycles, Deviation of Actual Cycles from Ideal Cycles, Internal and Stage
Efficiencies, Reheat factor, Combined Power and Heating cycle Cogeneration.
UNIT-02 Steam Generators and Condensers
Classifications, Water tubes and Fire tube Boilers, High Pressure Boilers, Fluidized Bed
Boiler, Mounting and Accessories, Natural and Forced Circulation, Boiler Draught, Boiler
Trail and Heat Balance Draught, Height and Diameter of Chimney, Draught losses, Steam 06L
Jet Draught, Types, Vacuum Measurement, Air Removal from the Condenser, Air Pump,
Condenser Efficiency, Cooling Tower.
UNIT-03 Steam Nozzles

Introduction, Steady Flow Energy Equation and its Application to Steam Nozzles, Isentropic
Expansion of Steam through Convergent and Divergent Nozzles, Critical Pressure Ratio, 06L
Condition for Maximum Discharge, Choking of Nozzles, Effect of Back Pressure, Super
Saturated Flow through Nozzles, Flow with Friction Nozzle Efficiency.
UNIT-04 Steam Turbines
Principle and Working of Impulse and Reaction Turbines, Pressure and Velocity
Compounding; Velocity Triangles for Impulse and Reaction Turbines, Efficiency, Diagram 09L
Efficiency, Steam Speed to Blade Speed Ratio for Optimum Performance, Losses in Steam
Turbine, Performance and Governing of Steam Turbines.
UNIT-05 Compressible Flow
Governing Equations for Inviscid-Compressible Flows - Static and Stagnation Properties - 09L
Speed of Sound and Mach number, Isentropic Flow through Variable Area Passage Ducts -
Choking of Flow.
Course Outcomes
CO1: Identify and predict the behavior of Vapour Power Cycle.
CO2: Draw heat balance sheet of Steam Generator.
CO3: Determine the performance of Steam turbines
1. Steam Turbine Theory and Practice by WJ Kearton, CBS.
2. Thermal Engineering by Sadhu Singh and Sukumar Pati, Pearson
3. Thermal Engineering by Ajoy Kumar and GN Sah, Narosa Publishing.
4. Fundamentals of Compressible Flow by SM Yahya, New Age International.

Course Name: Refrigeration and Air Conditioning
Course Code: ME-314
Course Type: Core
Course Objectives
 To introduce the fundamental principles and different methods of refrigeration and air conditioning.
 To impart the knowledge of various refrigeration cycles and evaluate performance using refrigerant property tables.
 To introduce the fundamental principles of cryogenics and the various thermodynamic cycle for liquefaction of gases.
 Understand the basic air conditioning processes on psychometric charts, calculate cooling load for its applications in comfort and industrial
air conditioning.
Refrigeration Cycles: Review of Thermodynamic Principles of Refrigeration, Refrigeration Methods, Reverse
UNIT-01 03L
Carnot Cycle, Bell Coleman Cycle, COP Comparison, Air Craft Refrigeration Cycles
Vapor Compression Refrigeration Systems: Theoretical and Actual Vapor Compression Cycle, Factors
Affecting the Performance of Vapour Compression Cycle, Methods of Improving Vapor Compression Cycle,
UNIT-02 09L
Pressure-enthalpy and Temperature- entropy Charts, Multi Evaporator System, Multi Expansion Valve System,
Multi Stage Compression System, Cascade Refrigeration
Refrigerants: Classification and Designation of Refrigerants. Desirable Properties of an Ideal Refrigerant.
UNIT-03 Properties and Uses of Common Refrigerants like R-12, R22, R 134-A, NH3. Comparison of Refrigerants, Non 03L
CFC Refrigerants, Green House Effect.
Vapor Absorption Refrigeration Systems: Introduction, Working of Simple Vapor Absorption System, Desirable
Properties of Binary Mixture (Aqua-ammonia), Performance Evaluation of Simple Vapor Absorption System,
UNIT-04 03L
Actual VAS, Li-Br and Ammonia Water Absorption System, Applications of VAS, Comparison between Vapor
Compression and Vapor Absorption System
Liquefaction of Gases: Joule Thompson Coefficient, Thermodynamically Ideal Liquefaction System,
UNIT-05 Liquefaction Systems – Simple Linde Hampson Cycle, Precooled Liquid Hampson Cycle, Dual Pressure Linde 06L
Hampson Cycle, Claude Cycle, Engineering Application of Cryogenics
Psychometric and Air Conditioning: Introduction to Air Conditioning, Psychometric Properties and Terms,
Psychometric Relations, Psychometric Processes and Its Representation on Psychometric Chart, BPF of Coil,
ADP, Adiabatic Mixing of Two Air Streams, SHF, RSHF, GSHF, ESHF,Evaporative Cooling, Humidifier Efficiency,
UNIT-06 12L
Cooling Towers and Their Performance,Thermodynamics of Human Body, Comfort and Comfort Chart, Factors
Affecting Human Comfort, Concept of Infiltration and Ventilation, Indoor Air Quality Requirements, Factors
Contributing to Cooling Load
Course Outcomes
CO1: Illustrate the fundamental principles and applications of refrigeration and air conditioning system.
CO2: Obtain cooling capacity and coefficient of performance by conducting test on vapor compression
refrigeration systems.
CO3: Calculate cooling load for air conditioning systems used for various applications.
CO4: Operate and analyze the refrigeration and air conditioning systems.
1. Refrigeration and Air Conditioning by C.P. Arora, TMH Publication
2. Refrigeration and Air Conditioning by Stoecker, McGraw Hill
3. Refrigeration and Air Conditioning by Manohar Prasad, New Age International Publisher
4. Refrigeration and Air Conditioning by S. N. Sapali, PHI Publication
5. Cryogenics Systems by Randall F. Barron, Oxford University of Press

Course Name: Manufacturing Technology Lab-I
Course Code: ME-315
Course Type: Core
Course Objectives
 To gain practical knowledge of pattern and mould making.
 To learn the utility of green sand to make a mould to perform the casting operations.
 To make the product from metal powder using powder metallurgy process.
 To develop the skills of using the different machines such as rolling machine, wire drawing machine, punching machine,
hydraulic press and edge bending machine.
 Apply the welding techniques to make various types of joints.
List of Experiments
1. To prepare a pattern as per given drawing using conventional and power operated tools.
2. Study of Sieve Shaker and to find grain fineness number for a given sample of foundry sand.
3. To estimate the clay content & moisture content in the green sand using Clay Content Tester and Moisture Content
Tester respectively.
4. To estimate the permeability of the green sand using Permeability Tester and estimation of compressive & Shear
strength for the green sand using Sand Strength Tester.
5. To prepare green sand mould as per drawing and pouring with Aluminum metal for solidification.
6. To make a product of giving drawing using metal powder by the compacting and sintering operation.
7. Preparation of utility job (tong) as per drawing using forging operation and to demonstrate the strip rolling using Rolling
Mills.
8. Demonstration of wire drawing operation using wire drawing machine and to extrude a cylindrical cup by backward
Extrusion.
9. To perform Blanking & Punching operation on a given sheet and study of simple, compound and progressive press tool.
10. To prepare a bend using edge bending machine and deep drawing using Hydraulic Press.
11. To make joints on the given sheets using spot and seem welding.
12. Study of MIG and TIG welding machine and to prepare the T-joint using MIG/TIG welding machines.
13. To make joints as per given drawing using soldering & brazing experiment
Course Outcomes
CO1: Decide the different characteristics of green sand.

CO2: Understand the effect of different ingredients on the quality of green sand.
CO3: Experimentally perform the forging and sheet metal forming operations.
CO4: Make various types of joints using the welding techniques.

Course Name:Thermal Engineering Lab-I
Course Code: ME-316
Course Type: Core
Course Objectives
 To gain practical knowledge by demonstration of experiments to correlate with the theory.
 To study the working principle of various type of boilers and steam turbines.
List of Experiments
1. To study& determine the cooling tower efficiency.
2. To find the efficiency of air pumps.
3. To study and demonstrate the horizontal fire tube boiler.
4. To study and demonstrate the water tube boiler.
5. To study the working and function of mountings and accessories in boilers.
6. To prepare heat balance sheet for given boiler.
7. To find the condenser efficiencies.
8. To find power output & efficiency of a steam turbine.
9. To study the working of impulse and reaction steam turbines.
10. To find dryness fraction of steam by separating and throttling calorimeter.
11. To find calorific value of a sample of fuel using Bomb calorimeter.
12. To study flow characteristics through a convergent, and convergent-divergent nozzle with both subsonic and supersonic
flow.
Course Outcomes
CO1: Understand the working principle of various types of boilers.
CO2: Understand the working principle of Impulse & Reaction steam turbines, condenser & nozzles.

Course Name: Refrigeration and Air Conditioning Lab
Course Code: ME-317
Course Type: Core
Course Objectives
 To help understand operating of various refrigeration and air conditioning apparatuses
 To gain practical knowledge by applying the experimental methods to correlate with the theory
 To learn the usage of temperature and flow instruments for various performance measurements
 Learnt to apply the mathematical steps and graphical analysis to the experimental data
List of Experiments
1. To determine the theoretical and experimental Coefficient of Performance (COP) of a Domestic Refrigerator.
2. To determine the theoretical and experimental COP of a heat pump.
3. To estimate the effect of sub-cooling and super-heating on the COP of VCR (Vapor Compression Refrigeration) system.
4. To determine the system capacity, capacity factor, apparatus dew point (ADP) and COP of Window Air Conditioner.
5. To determine and compare the theoretical and experimental COP of VCR system.
6. To calculate the mass flow rate of refrigerant, bypass factor, ADP and capacity (in humidifying condition) of an air
conditioning test rig.
7. To calculate the mass flow rate of refrigerant, bypass factor, ADP and capacity (in dehumidifying condition) of an air
conditioning test rig.
8. To study and determine the COP of Vapor Absorption Refrigeration System
9. To study and determine the COP of Cascade Refrigeration System
10. To find the COP of a Water Cooler
11. To study the hermetically sealed compressor and different types of cut-out /safety devices used in Vapor Compression
Refrigeration System
12. To study the Ice making test rig.
Course Outcomes
CO1: Handle various refrigeration and air conditioning equipment and take measurements and analyze results
CO2: Experimentally realize the actual physical phenomenon occurs in Refrigeration and air conditioning systems
CO3: Use various measuring sensors and instruments with precision
CO4: Work in a group for performing laboratory experiments and interpreting the results

Course Name: Machine Design – II
Course Code: ME-321
Course Type: Core
Course Objectives
 To impart knowledge of design of transmission components.
 To introduce procedures for strength and wear based design.
 To enable to identify, formulate and solve design engineering problems based on design and analysis.
UNIT-01 Design of Spur Gears 06L
Nomenclature, Involute Gears, Lewis Equation and Lewis Form Factors, Working Stress in Gear
Teeth, Dynamic Loads on Gear Teeth, Estimation of Module based on Beam Strength and Wear
Strength, Design of Spur Gears for Wear.
UNIT-02 Design of Helical Gears 06L
Nomenclature - Virtual Number of Teeth, Helix Angle, Free Width, Velocity Factors, Strength Design,
Limiting Endurance, Beam Strength Load, Dynamic Loading, Wear Strength of Helical Gears, Special
Helical Gears.
UNIT-03 Design of Bevel Gears 06L
Straight Bevel Gears - Nomenclature, Virtual Number of Teeth, Endurance Load, Dynamic Load,
Wear Load –AGMA Standards, Design of Gears whose Axis are Intersecting at Right Angle, Spiral
Bevel Gears.
UNIT-04 Design of Worm Gears 06L
Nomenclature, Lewis equation for Strength Design, Design of Worm Gears-given Approximate Center
to Center Distance, Dynamic Load, Endurance Load, Wear Load, AGMA- Power Reducing Equations,
Efficiency of Worm Gears, Friction in Worm Gears and Heat Dissipation.
UNIT-05 Design of Journal Bearings 06L
Introduction to Lubrication, Hydrodynamic Bearings, Somerfield Number, l/d Ratio, Clearance Ratio,
Minimum Film Thickness, Bearing Design Procedure: Selection of Parameters, Bearing Materials.
UNIT-06 Design of Ball and Roller Bearings 03L
Types, Static and Dynamic Load Capacity, Bearing Life, Selection of Bearings for Steady and Variable
Loading.
UNIT-07 Design of Multispeed Gear Box 03L
Use of Preferred Numbers, Design with Speed Diagrams for Gear Boxes.
Course Outcomes
CO1: Design various machine components involved in transmission.
CO2: Acquire ability to design and analysis of various types of gears.
CO3: Design bearings and multispeed gear box.
1. Machine Design by Shigley, McGraw Hill.
2. Machine Design by R.L Norton, Pearson Education.
3. Machine Design by Pandya & Shah, Charotar Publishing House.
4. Machine Design by Sharma & Aggarwal, Kataria Sons.
5. Design data Book by Kalaikathir Achagam, PSG College Coimbatore.

Course Name: Manufacturing Science and Technology-II
Course Code: ME-322
Course Type: Core
Contact Hours/Week: 3L + 1 T Course Credits: 04
Course Objectives:
 To impart knowledge about the various metal removal and layer laminating processes.
 To introduce the fundamental concepts and mechanics of cutting machining, abrasive machining and erosive machining.
 To enable the students to understand technology and science of layer lamination and surface coating processes.
UNIT-01 Introduction: Need and Classification of Material Substractive Processes (Machining) and Material additive 03L
Processes (Layer Lamination & Coating).
UNIT-02 Cutting Machining Processes: Mechanism and Mechanics of Cutting Machining: Chip Formation, Types of
Chips, Orthogonal and Oblique Cutting, Cutting Forces and Merchant Circle Diagram, Shear and Friction
angle, Shear and Chip Velocity, Length of shear and friction plane, Energy in shear and friction plane, Shear
Stress and Strain, Heat and Temperature in shear and friction plane. Materials and Life of Cutting Tool:
Composition and Properties of Tool Materials, Tool Failure Mechanisms and Calculation of Tool life,
Description of Practical Cutting Machining Processes: Tool Geometry, Process Geometry, Process 12L
Parameters, Performance Parameters for Turning and related operations, Shaping and Planning, Drilling and
Related Operations, Milling and Gear Cutting, Broaching and Sawing, Economics of Cutting.
UNIT-03 Abrasive Machining Processes: Need and Classifications; Abrasive Grinding: Wheel Specification, Wheel Life,
Balancing, Truing and Dressing of Wheels, Classifications of Abrasive Grinding Processes, Chipping action in
grinding, Calculation of Material Removal Rate, Forces and Power, Heat and Temperature in Abrasive Grinding,
Working Principle and Applications of Grinding Processes for Prismatic and Rotational Parts, Abrasive Finishing:
Conventional Abrasive Finishing: Honing, Lapping, Polishing and Buffing, Modern Abrasive Finishing: Abrasive 06L
Flow Finishing, Magnetic Abrasive Finishing and Magnetic Float Finishing.
UNIT-04 Advanced Machining Processes: Need and Classification of Erosion based Machining Processes, Process
Principle, Equipment’s and Applications of Electro-Discharge Machining (EDM) and Beam Machining Processes (e.g.
LBM, EBM, IBM,), Electro-Chemical Machining (ECM) and Chemical Machining Processes (e.g. CHM, PCM, BCM), 09L
Ultrasonic Machining (USM) and Jet Machining Processes (AJM, WJM, AWJM).
UNIT-05 Material Additive Processes: Layer Lamination Processes: Stereo Lithography (SLA), Solid Ground Curing
(SGC), Selective Laser Sintering (SLS) and Three Dimensional Printing (TDP), Fused Deposition Modelling
(FDM) and Laminated Object Manufacturing (LOM), Layer Coating Processes: Physical Vapour Deposition, 06L
Chemical Vapour Deposition, Electro-Chemical Deposition, Atmoshperic Plasma Spraying, Vaccum Plasma
Spraying, Detonation Gun Spraying.
Course Outcomes:
CO1: Identify the requirements of selection of different process parameters to perform any particular machining operation.
CO2: Describe the effects of various forceses acting during different machining processes.
CO3: Apply principles of advanced machining processes in machining of difficult-to-machine materials.
CO4: Assess the quality of surface produced after applying the layer additive processes.
1. Fundamentals of Modern Manufacturing: Materials Processes and Systems by M. P. Groover, John Wiley and Sons.
2. Manufacturing Science by Ghosh and Mallik, East West Press.
3. Introduction to Machining Science by G. K. Lal, New Age International .
4. Fundamentals of Machining Processes by Hassan El-Hofy, Taylor and Francis.
5. Rapid Protyping: Principles and Applications by Rafiq Noorani, Wiley International.

Course Name: Thermal Power Engineering-II
Course Code: ME-323
Course Type: Core
Course Objectives
• To introduce the concepts of propulsion and thrust.
• To introduce the concepts of Internal Combustion Engines.
• To enable the students to understand the factors that causes abnormal combustion.
UNIT-01 Gas Turbine :Introduction, Brayton Cycle, Regeneration and Reheating, Open and
Closed Cycle Gas Turbine, Gas Turbine Systems: 09L
Air Compressors: Positive Displacement and Non-Positive Displacement; Reciprocating,
Centrifugal and Axial Flow Type; Characteristic Curves of Compressors.
UNIT-02 Jet Propulsion Systems: Fundamentals of Jet Propulsion, Concept of Propulsion and
Thrust, Propulsion Cycle, Power and Efficiency Calculations, Turbojet, Turbofan, and 06L
Turboprop Engines, Fundamentals of Rocket Propulsion.
UNIT-03 IC Engines: Introduction, Review of Cycles, Actual Cycles and their Analysis, Classification of
IC Engine, Two Stroke and Four Stroke Cycle Engines, Difference between CI and SI Engines,
Engine Design and Operating Parameters, Fuels and their Properties, Stoichiometric and 06L
Actual Air Requirements.
UNIT-04 Combustion in IC Engines: Combustion in SI Engines, Flame Front Propagation, Flame
speed, Ignition delay, Abnormal Combustion, Combustion Chambers for SI Engines, 06L
Combustion in CI Engines, Ignition Delay, Combustion Knock, Combustion Chamber for CI
Engines,
UNIT-05 Different Components and Testing of IC Engines: Carburetors, Gasoline Injection, Friction
and Lubrication, Types of Lubrication Systems, Engine Cooling, Magneto and Battery Ignition
Systems, Ignition Timing, Engine Power, Engine Efficiencies, Type of Tests and Characteristic 09L
Curves, Variables Affecting Performance Characteristics, Methods of Improving Engine
Performance.
Course Outcomes
CO1: Identify and predict the behavior of Gas turbine Cycle.
CO2: Understand phenomenon of Combustion in IC Engines.
CO3: Determine the performance of IC Engines.
1. Internal Combustion Engines by Ganesan, V, Tata McGraw Hill Book Co.,
2. Internal Combustion Engine Fundamentals by J.B. Heywood, McGraw-Hill.
3. Gas Turbine Theory by H.I.H. Saravanamuttoo, G.F.C. Rogers, H. Cohen, Pearson Education Ltd.
4. Fundamental of Propulsion by V. Babu, ANE Books.

Course Name: Automobile Engineering
Course Code: ME-324
Course Type: Core
Course Objectives
• To introduce the various systems of automobiles and their integration as a whole.
• To enable the students to learn the principle and working of various systems of Automobiles.
• To enable the students to learn the trouble shooting of various automotive components.
Number
UNIT-01 Introduction and Chassis Construction
Classification of Automobiles, Components of an Automobile, Basic Structure, Transmission System,
Auxiliaries, Front Engine Rear Drive and Front Engine Front Drive Vehicles, Four Wheel Drive 06L
Vehicles, Conventional Construction, Underbody, Sub Frames, Defects in Frames, Frameless
Construction, Industrial Vehicle Frames, Design &Structural Testing.
UNIT-02 Clutches and Transmission System
Necessity &Functions of Transmission, Types of Transmission, Requirements and principle of
clutches, Dry Friction Clutches, , Types of Clutches-Single Plate, Multi Plate, Clutch Operation, Gear 06L
Box, Sliding Mesh Gear Box, Constant Mesh Gear Box, Synchromesh Gear Box, Selector
Mechanism, Transfer Box, Automatic Transmission, Principle of Automatic Transmission.
UNIT-03 Suspension System and Propeller Shaft
Basic Requirements and Coordinate Frames, Function of Suspension Springs, Types of
Suspensions, Shock Absorbers, Stabilizer or Anti-Roll Device, Suspension Mechanics: Solid Axle 06L
Suspension, Independent Suspension, Roll Center and Roll Axis, Trouble Shooting, Propeller Shaft,
Universal Joints, Differential, Rear Axle, Rear Axle Drives, Rear Axle Casing.
UNIT-04 Front Axle and Steering
Front Axle, Wheel Geometry, Factors of Wheel Alignment, Steering Geometry, Mechanisms, 03L
Cornering Force, Self- Righting Torque, Understeer and Oversteer, Steering Gears and Ratio,
Reversibility, Power Steering, Steering Kinematics, steering trouble shooting.
UNIT-05 Cooling System and Lubrication
Necessity and Methods of Cooling, Types of Cooling, Components of Cooling System Radiator, 03L
Coolant, Antifreeze Solutions, Requirements of Lubrication, Types of Lubricants, Testing of
Lubricants, Oil Additives, Systems of Engine Lubrication, Oil Filter, Oil Pump,Oil Cooler.
UNIT-06 Fuel Supply and Ignition Systems
Fuel Supply Systems, Carburettor Types, Fuel Injection Pump, Supercharger, Fuel Filter, Types of 06L
Ignition Systems, Components,Spark Plug, Magneto Ignition System
UNIT-07 Introduction to Hybrid Electric Vehicles
History of Hybrid and Electric Vehicles,Concept of Hybrid Traction,VariousHybrid Drive-Train
Topologies, Power Flow Control in Hybrid Drive-Train Topologies, Basic Concept of Electric Traction, 06L
Introduction to Various Electric Drive-Train Topologies, Power Flow Control in Electric Drive-Train
Topologies, Introduction to Electric Components used in Hybrid andElectric Vehicles.
Course Outcomes
CO1: Identify different systems of automobiles.
CO2: Understand the interaction and working of different automotive systems.
CO3: Understand the parameters and ways for trouble shooting of automotive components.
1. Automobile Engineeing by Kirpal Singh,Standard Publisher.
2. Automotive Mechanics by Joseph Heitner, East West Press.
3. Vehicle Dynamics by Reza N. Jazar, Springer.
4. Automobile Engineering by R.B Gupta, SatyaPrakshan.
5. 5. Electric and Hybrid Vehicles Design Fundamentals by Iqbal Hussein, CRC Press.

Course Name: Manufacturing Technology Lab-II
Course Code: ME-325
Course Type: Core
Course Objectives
 To gain practical knowledge of various machine tools.
 To learn the motion mechanism of different machine tools such as shaper, planer, slotter etc.
 To learn the usage of milling machine to make the gears and slots.
 To develop the skills of using grinding machines to machine the prismatic and cylindrical workpieces.
List of Experiments
1. Preparation of single point cutting tool using tool-grinder machine. Also write the process sheet for the same.
2. To measure the different components of cutting forces at various cutting speed, feed and depth of cut. Write the process
sheet for the same.
3. To study tool wear and tool life at various cutting speed, feed and depth of cut. Write the process sheet for the same.
4. To measure the cutting temperature at different cutting speed, feed and depth of cut. Write the process sheet for the
same.
5. To study the construction and motion mechanism of shaper, planer and slotter, and prepare the job as per drawing using
shaper machine. Write the process sheet and draw the sketches of the machine tool and tools used.
6. To drill a hole of given diameter using radial drilling machine and make a hexagonal slot as per drawing in this hole
using slotting machine. Write the process sheet and draw the sketches of the machine tool and tools used.
7. Study of indexing mechanism for gear cutting and to cut gear on a gear blank using indexing mechanism on horizontal
milling machine. Write the process sheet and draw the sketches of the machine tool and tools used.
8. To study of hobbing machines and cut a gear of given number of teeth on hobbing machines. Write the process sheet
and draw the sketches of the machine tool and tools used.
9. To make a T- slot as per drawing using vertical milling machine. Write the process sheet and draw the sketches of the
machine tool and tools used.
10. To make a job as per drawing using surface grinding machine. Write the process sheet and draw the sketches of the
11. To make a job as per drawing using cylindrical grinding machine. Write the process sheet and draw the sketches of the
12. Demonstration and study of Electrical Discharge Machining (EDM), Machine.
Course Outcomes
CO1: Provide practically the different tool angles on a given cuboid piece to make a single point cutting tool.
CO2: Understand the measurement of cutting forces, tool wear and cutting temperature at various cutting conditions.
CO3: Understand the differences in motion mechanism and machining operations performed by shaper, planner and
slotter.
CO4: Select suitable machining processes for the specific object manufacturing.

Course Name: Thermal Engineering Lab-II / Automobile Engineering Lab
Course Code: ME-326
Course Type: Core
Course Objectives
 To gain practical knowledge by conducting experiments to correlate with the theory.
 To study the working principle of Gas Turbine and Turbofan Engine.
 To conduct a load and performance test for single and multi-cylinder petrol engine.
 To learn the automobile systems for various constructional details, working principles and operation.
List of Experiments
1. To determine the volumetric efficiency & mass flow rate of the single stage Air Compressor.
2. To conduct a performance test on four stroke four-cylinder diesel engine test rig and to draw the heat balance sheet.
3. To conduct a performance test on four stroke four-cylinder petrol engine test rig and to draw the heat balance sheet.
4. To calculate the IHP (Morse Test) and mechanical efficiency of the four stroke four-cylinder petrol engine test rig.
5. To Study a Gas Turbine model.
6. To study a Turbofan engine model.
7. To study and prepare report on the constructional details, working principles and operation of the Automotive Clutches.
8. To study and prepare report on the constructional details, working principles and operation of the Automotive Transmission
systems.
9. To study and prepare report on the constructional details, working principles and operation of the Automotive Suspension
Systems.
10. To study and prepare report on the constructional details, working principles and operation of the Automotive Steering
Systems.
11. To study and prepare report on the constructional details, working principles and operation of the Automotive Brake systems.
12. To study and prepare report on the constructional details, working principles and operation of the Engine cooling & lubricating
Systems.
Course Outcomes
CO1: Learn the underlying working principle of Turbine and Turbofan Engine.
CO2: Apply the concept of Morse test on SI engine. (Multi cylinder).
CO3: Calculate the IP, BP, brake thermal efficiency.

Course Name: Operations Research
Course Code: ME-411
Course Type: Core
Course Objectives
 To introduce students with the basic concepts, models and statements of the operations research theory.
 To impart capabilities in the students for analyzing different situations in the industrial/ business scenario involving limited resources.
 To enable them to formulate and solve optimization problems
Number
UNIT-01 Introduction 03L
Nature and development of operation research (OR) , some mathematical preliminaries, general methodology of
operation research, Phases of OR, Models in OR, Characteristics of good model, Construction of model, Role of
computers in OR, and application of operation research to industrial problems, a survey.
UNIT-02 Linear Programming Problems 09L

Formulation of linear programming deterministic models; graphical solution; simplex algorithm, computational
procedure in simplex, duality and its concept, dual linear programming, application of simplex technique to
industrial problem. Assignment Models; formulation of assignment problems, methods for solutions; transportation
problems; methods for obtaining optimal solution; degeneracy in transportation problems; transhipment problems.
UNIT-03 Game Problems 06L
Introduction and scope of game problems in business and Industry; Definitions , rules for game theory, Mini-max
criterion and optimal strategy,n person Zero sum games, solution of two person zero sum game; game problem as
a special case of simplex.
UNIT-04 Network Problems 06L
Intoduction to project planning and project scheduling,Tools and techniques of project management, Basic
principles of network construction,Fulkersons rule, Critical path Method , Programme Evaluation and Review
Technique (CPM/PERT) Crashing of activities, and solution of simple problems.
UNIT-05 Queing Problems 06L
Queuing systems and concepts; Kendalls notation for representing queing models Opearting characteristics of
queing systems, classification of queuing situations; solution of queuing problems, single channel, single stage,
finite and infinite queues with Poisson arrival and exponential service time; applications to industrial problems
UNIT 6 Sequencing Problems 06L
Sequencing problems, Assumptions in sequencing problems, Processing of 'n' jobs through one machines
Processing of 'n' jobs through two machines, processing of 'n' jobs through three machines, processing of 'n' jobs
through ‘m’ machines. Solution of sequencing problems.
Course Outcomes
CO1: To have the knowledge of role of O.R. in solving industrial problems.
CO2: Formulate and solve mathematical model for a physical situations like production and distribution of goods and economics.
CO3: Develop mathematical skills to analyse and solve network models arising from a wide range of applications
CO4: Be able to choose rational options in practical decision-making problems using standard OR models
1. Operation Research: An Introduction by H.A.Taha, Pearson.
2. Introduction to Operation Research by Hira and Gupta, S. Chand.
2. Linear Programming by Loomba, Mc Graw Hill.
4. Fundamentals of Operation & Research by Ackoff and Sasiene, John Wiley.

Course Name: Computer Aided Design
Course Code: ME-412
Course Type: Core
Contact Hours/Week: 2L + 2P Course Credits: 03
Course Objectives
 To impart the basic knowledge of use of computers in product development and design.
 To introduce the students to mathematical and computational modelling of curves, surface and solids.
 To enablethe student to use computer for product modelling andanalysis.
UNIT-01 Introduction:Introduction to CAD/CAM/CAE and Historical Developmentof CAD,Product 03L
Development Cycle,Typical CAD SystemArchitecture,Graphic Devices and Classification,
Input/output Devices, Operating Systems and Environments,Applications, Advantages and
Limitations of CAD,Concept of Coordinate Systems,. Line Generation Algorithm: DDA,
Bresenham’s Algorithms.Graphics Exchange Standards and Database Management Systems.
UNIT-02 Modelling of Curves and Surfaces:Curve Representation: Parametric vs Non-parametric, Implicit vs 06L
Explicit vs Intrinsic, Advantages of Parametric Representation, Analytic Curves, Synthetic Curves:
Concept and Types of Continuity, Cubic Spline: Equation, Bezier Curve, B-Splines and NURBS,
Various Types of Surfaces along with Their Typical Applications, Properties, Blending of
Curves/Surfaces.
UNIT-03 Modelling of Solids: Properties of Solid Model, Properties of Representation Schemes, Concept of
Half-Spaces, Boolean Operations, Schemes: Boundary Representation (B-Rep), Constructive Solid 03 L
Geometry (CSG), Sweep Representation, Analytical Solid Modelling (ASM), Primitive Instancing, Solid
Manipulations.
UNIT-04 Geometric Transformations: Homogeneous Representation, Translation, Reflection, Rotation,
Scaling, Shear in 2D and 3D, Combined Transformations, Modelling and Coordinate Transformations, 03 L
Graphic Projections: Orthographic, Axonometric,Oblique, and Perspective Projections.
UNIT-05 Finite Element Analysis: Review of Stress-Strain Relation and Generalized Hooke's Law, Plane
Stress and Plane Strain Conditions; Concept of Total Potential Energy; Basic Procedure for Solving a
Problem using Finite Element Analysis, 1-D Analysis: Concept of Shape function and natural 06 L
coordinates, 1-D structural problems with elimination and penalty approaches
UNIT-06 Design Optimization: Introduction, Gradient-based and Heuristic Methods, Johnson Method of
Optimization Normal Specification Problem, Redundant Specification Problem,. 03 L
Course Outcomes
CO1: To use computers in mechanical component design.
CO2: To use mathematical concepts of curve, surface and solid formulations in CAD.
CO3: To use design and analysis techniques and softwares in CAD.
1. CAD/CAM Theory and Practice by I. Zeid, McGraw Hill.
2. Mathematical Elements for Computer Graphics by David Rogers and J Alan Adams, TMH Publication.
3. Introduction to Finite Elements in Engineering by Chandrupatla T A and Belegundu A D, PHI.
4. Principles of Optimum Design: Modeling and Computation by Paplambros P. Y., Wilde D. J., Cambridge University Press, UK

Course Name: Engineering Economics and Accountancy
Course Code: HS-404
Course Type: Core
Course Objectives
 To impart knowledge about the Economics and its applicability to the Engineers
 To introduce the fundamental concepts of economics
 To enable the students to understand the factors that causes the changes in economic conditions of the entrepreneur
UNIT-01 Introduction to Engineering Economics: Definitions, Nature, Scope and application; Difference 06L
between Micro Economics and Macro Economics; Theory of Demand & Supply: Meaning,
Determinants, Law of Demand, Elasticity of demand, Demand Forecasting, Law of Supply,
Equilibrium between Demand & Supply.
UNIT-02 Production and Cost: Production functions, lsoquant, Least Cost combination, Laws of Returns 06L
to Scale. Economics and Diseconomies of Scale of production, Cost and Cost curves, Revenue
and Revenue curve, Break even analysis.
UNIT-03 Costing and Appraisal: Cost elements, Economic cost, Accounting cost, Standard cost, Actual 05L
cost, Overhead cost, Cost control, Criteria of project appraisal, Social cost benefit analysis
UNIT-04 Markets: Meaning, Types of Markets, Characteristics (Perfect Competition, Monopoly, 05L
Monopolistic Competition, Oligopoly) Price and Output Determination; Product Differentiation;
Selling Costs; Excess Capacity.
UNIT-05 Money: Meaning, Functions, Types; Monetary Policy- Meaning, Objectives, Tools; Fiscal 04L
Policy:-Meaning, Objectives, Tools.
Banking: Meaning, Types, Functions, Central Bank: its Functions, concepts CRR, Bank Rate,
Repo Rate, Reverse Repo Rate, SLR.
UNIT-06 Depeciation: Meaning of depreciation, causes, object of providing depreciation, factors affecting 04L
depreciation, Methods of Depreciation: Straight line method, Diminishing balance method,
Annuity method and Sinking Fund method
UNIT-07 Financial Accounting: Double entry system (concept only), Rules of Double entry system, 06L
Journal(Sub-division of Journal) , Ledger, Trial Balance Preparation of final accounts-Trading
Account. Profit and Loss account, Balance Sheet.
Course Outcomes
CO1: Identify the challenges of the economy as entrepreneur/manufacturer as well as consumer
CO2: Describe the economic system at the micro and macro level
CO3: Apply principles of economics and accountancy in the professional, personal and societal life
CO4: Assess the role of engineering economics and accounting in attaining economic efficiency
1. Principles of Micro Economics by Mceachern & Kaur, Cengage Publication.
2. Managerial Economics by Craig Peterson & W Cris Lewis, PHI Publication.
3. Modern Microeconomics by A. Koutsoyiannis, Macmillan.
4. Managerial Economics Theory and Applications by D. M.Mithani. Himalaya Publication House.
5. Fundamental of Managerial Economics Mark Hirschey, South Western Educational Publishing.
6. Engineering Economics by Degramo, Prentice Hall.
7. Financial Accounting–A Managerial Perspective by R. Narayanaswamy, PHI.
8. Introduction to Accounting by J.R. Edwards & Marriot, Sage Publication.
9. Cost Accounting by Jawahar Lal, Tata McGraw Hill.
10. Project Planning Analysis, Selection, Implementation and Review by Prasanna Chandra, Tata McGraw Hill

Course Name: Computer Aided Manufacturing
Course Code: ME-421
Course Type: Core
Contact Hours/Week: 2L+ 2P Course Credits: 03
Course Objectives
 To impart knowledge of different typed of automations and use of computer in manufacturing.
 To introduce the fundamentals of numerical control of machine tools and its CNC part programming.
 To impart the knowledge of robotics and flexible manufacturing system.
Number
UNIT-01 Introduction to Automation and Numerical Control: Goals and Level of Automation, Hard Vs Soft
Automation, Principles of Numerical Control and Components, Control of NC systems-Point to Point, Straight 03L
Cut and Continuous Path, Open loop and Closed Loop, NC Interpolations- Linear, Circular, Helical, Parabolic
and cubic Interpolation, Applications of Automation and NC systems.
UNIT-02 CNC Machine Technology: Construction Features and Classification of CNC Machine Tool, Elements of CNC
Machine and Systems, Precision Measuring and Positioning of CNC, CNC Machine Structural Details-
Configuration and Design, Friction and Anti-friction LM Guide ways, Ball Screw, Torque Transmission 03L
Elements, Spindle Drives, Feed Drives, Positional Measuring Transducers- Gratings, Encoders, Induction,
Laser Interferometer, Spindle, ATC, APC, Tooling-Qualified, Preset Tooling.
Unit-03 CNC Machine Programming: Structure of CNC program, Coordinate System, Manual CNC Part
Programming: Programming for Two Axis and Three Axis Control System, G and M Codes, Cutter Radius
Compensation, Tool Nose Radius Compensation, Canned Cycles, Sub Routines, Do Loop, Mirroring Features,
Manual Part Programming for CNC Turning and Milling Centres, Computer Aided CNC Part Programming:
Automatically Programmed Tools (APT) Programming- APT Language, Structure and Geometry, APT motion 09L
and Post Processor Commands, Complications Control Commands. Macro Subroutines, Part Programming
Preparation for Typical Example, Macros and Parametric Programming Techniques, CAD/CAM Based Part
Programming.
UNIT-04 Robot Technology: Robot anatomy and Related Attribute, Robot Control Systems- Limited Sequence,
Playback with Point to Point , Playback with Continuous and Intelligent Control, End Effectors – Gripper, Tool. 06L
Sensors in Robot- Tactile Sensors, Proximity, Optical Sensors and Machine Vision, Robot Programming,
Applications of Industrial Robots.
UNIT-05 Flexible Manufacturing System: Component of FMS, Need and Objectives of FMS, Types of Flexibility and
FMS, FMS Lay Out and Advantages. Automated Material Handling System: Types and Application, Automated
Storage and Retrieval System (ASRS), Automated Guided Vehicles (AGVs), Tool Management, Tool Supply 06L
System, Tool Monitoring System, Flexible Fixturing, Flexible Assembly Systems.
Course Outcomes
CO1: Identify the correct use and place of automation.
CO2: Generate CNC part program for different machining operations.
CO3: Use the concept of flexible manufacturing system.
1. Numerical Control and Computer Aided Manufacturing by T.K. Kundra, P.N. Rao and N.K. Tiwari, TMH
2. Numerical Control of Machine Tools by S. Martin, London: Hodder & Stoughton
3. Computer Control of Manufacturing Systems by Yoram Koren, McGraw-Hill
4. Computer Numerical Control by Jon Stenerson and Kelly Curran, Printice-Hall of India Pvt.Ltd. New Delhi

Course Name: Finite Elements in Engineering
Course Code: ME-430
Course Type: Professional Elective-I
Course Objectives
 To introduce the concept and methodology of Finite element method.
 To apply general FEM Methodology for solving Solid Mechanics and Heat Transfer problems.
 To develop algorithms based on general FEM methodology.
UNIT-01 Introduction & Fundamental Concept:
Historical Background, Approximate Solution of Boundary Value Problems, Packages and
applications; Approaches-Galerkin's and Raleigh-Ritz, Step by Step procedure of FEM
Applications. 03L
UNIT-02 FEA of 1-D Problems: Governing equation and Boundary conditions for describing steady state
problems of Heat Transfer and Solid Mechanics, Finite Element Formulation-Discretization and
Polynomial Approximation using linear and quadratic elements, Development and Evaluation of
Elemental Matrices; Assembly Rule, Imposition Procedure for boundary conditions, Nodal
solution using Gauss elimination method, Post computation of the nodal solutions.
12L
UNIT-03 FEA of 2-D Thermal Analysis Problems: Governing equation and Boundary conditions for
describing steady state problems of Heat Transfer, Finite Element Formulation-Descritization
and Polynomial Approximation using Standard 2-D elements, Development and evaluation of 09L
elemental matrices, Assembly Rules, Imposition of Boundary conditions, Nodal solution, Post
computation of nodal solutions.
UNIT-04 FEA of 2-D Stress Analysis Problems: Governing Equation and Boundary Conditions for
describing steady state Plane Elastic Stress Analysis Problems: Finite Element Formulation
following the steps of Integral Formulation, Descritization and Polynomial Approximation using
Standard 2-D elements, Development and Evaluation of Elemental Matrices, Assembly of 09L
Matrices using Assembly Rules, Imposition Procedure for application of Essential Boundary
Conditions and Numerical Solution of Finite Element Equations, Post Computation of the
Solutions.
UNIT-05 Software Practice and Algorithm Development:
Algorithm Development for various Steps Involved in FEM Solution Methodology, Introduction to 03L
FEM Based Analysis Software like ANSYS, Hypermesh etc.
Course Outcomes
CO1: Learn the basic concepts and methodology of Finite Element Method.
CO2: Learn about Finite element Method Formulation.
CO3: To solve problems of Solid Mechanics and Heat Transfer using FEM.
CO4: Develop algorithms based of FEM methodology for a typical FEM problem.
1. Introduction To Finite Elements In Engineering by Chandrupatla and Belegundu, Pearson
2. Introduction To Finite Element Method by J.N Reddy, Tata McGraw Hill
3. The Finite Element Method In Engineering by S.S Rao, Butterworth Hienemann
4. Finite Element Method by O.C Zienkiewicz, Dover Publications
5. The Finite Element Method Using MATLAB by Kwon & Bang, CRC Press

Course Name: Optimization Methods in Engineering
Course Code: ME 431
Course Type: Professional Elective -I
Course Objectives
 To formulate the design problems as mathematical programming problems.
 To determine the degree of attainment of the goals with the available resources.
UNIT-01 Introduction 06L
Introduction, Terminologies, Design Variables and Constraints, Objective Function, Variable
Bounds, and Problem Formulation.
UNIT-02 Gradient Based Methods 09L
Newton-Raphson Method, Bisection Method, Secant Method. Multi-variable Optimization
Algorithms: Optimality Criteria, Unidirectional Search, Direct Search Methods: Box Method,
Hooke-Jeeves Pattern Search Method, Powell's Conjugate Direction Method, Gradient Based
Methods: Cauchy's Steepest Descent Method, Newton's Method. Marquan Method, Conjugate
Gradient Method, Variable-Metric (DFP) Method.
UNIT-03 Constrained Optimization Methods 09L

Kuhn Tucker Conditions, Transformation Methods: Penn Function Method, Method of Multipliers
(MOM), and Sensitivity Analysis.
UNIT-04 Specialized Algorithms Methods 06L
Integer Programming: Penalty Function Method, Branch and Bo' Method, Geometric
Programming.
UNIT-05 Non-Traditional Optimization Methods 06L
Genetic Algorithms, Simulated Annealing, Tabu Search and Ant Colony Optimization, Particle
Swarm Optimization; Applications to Engineering Optimization Problems.
Course Outcomes
CO1: Identify the required techniques to achieve a desired set of objectives.

CO2: Describe the best satisfying solution under a varying amount of resources and priorities of the goals.
CO3: Apply principles of resource optimization
CO4: Assess the suitability of technique for optimizing the real world problem
1. Optimization for Engineering Design: Algorithms and Examples by Kalyanmoy Deb, PHI Publication.
2. Engineering Optimization: Theory and Practice by S.S Rao, New International (P) Publication.
3. Engineering Optimization - Methods and Applications by Ravindran, Ragsdell and Rekla, John Wiley & Sons Publication.
4. Multi-Objective Optimization using Evolutionary Algorithms by Kalyanmoy Deb, Wiley Publication.

Course Name: Artificial Intelligence in Engineering
Course Code: ME-432
Course Objectives
 To introduce the concept and methodology Artificial Intelligence.
 To learn expert systems methodology for solving problems.
 To learn methodologies of decision making and reasoning.
UNIT-01 Introduction & Fundamental Concept:
Foundations, Scope, Problems, and Approaches of Artificial Intelligence. Intelligent agents:
Reactive, Deliberative, Goal-Driven, Utility-Driven, and Learning Agents Artificial Intelligence
programming techniques, Introduction to knowledge-based intelligent systems. 06L
UNIT-02 Knowledge Representation and Reasoning:

Ontologies, Foundations of Knowledge Representation and Reasoning, Representing and
Reasoning about Objects, Relations, Events, Actions, Time, and Space; Predicate Logic,
Situation Calculus, Description Logics, Reasoning with Defaults, Reasoning about Knowledge, 09L
Sample Applications.
UNIT-03 Expert system: 

Fuzzy Expert Systems: Fuzzy Sets, Fuzzy Relations, Fuzzy Implications, Construction of Data
Base and Rule Base, Inference Mechanisms, Defuzzification Methods, Artificial neural networks: 09L
neurons and neural networks, single layer perceptrons, multi-layer neural networks, learning
processes, radial basis function networks, recurrent neural networks, Hybrid intelligent systems.
UNIT-04 Representing and Reasoning with Uncertain Knowledge:

Probability, Connection to Logic, Independence, Baye's Rule, Bayesian Networks, Probabilistic 06L
Inference, Sample Applications.
UNIT-05 Decision-Making
Basics of Utility Theory, Decision Theory, Sequential Decision Problems, Elementary Game 06L
Theory, Sample Applications.
Course Outcomes
CO1: Learn the basic concepts Artificial Intelligence in Engineering.
CO2: Learn the basics of Artificial Neural Networks.
CO3: To Apply reasoning and decision making methodology in Artificial Intelligence.
1. Neural Networks: A comprehensive Foundation by S. Haykin, Pearson Education.
2. Artificial Intelligence: A Guide to Intelligent Systems by M. Negnevitsky, Addison-Wesley.
3. An Introduction to Fuzzy Logic for Practical Applications by K.Tanaka and T. Niimura, Springer.
4. Fuzzy logic with engineering applications by T. J. Ross, Wiley India Pvt. Ltd.  
5. Artificial Intelligence: A Modern Approach by Stuart Russell and Peter Norvig, Prentice Hall, New Jersey..

Course Name: Design & Analysis of Experiments
Course Code: ME-433
Course Objectives
 To impart principles and methods of experimental designs and analysis
 To introduce different techniques for design of experiments
 To enable select an appropriate design, conduct the experiment and interpret the result using
appropriate analysis methods
UNIT-01 Introduction: Introduction to Experimental Design Principles, Simple Comparative Experiments,
Applications of Experimental Design, Experimental Variable and Its Classification, Strategy of
Experimentation, Difference Between Field Experiments and Laboratory Experiments 06L
UNIT-02 Experiments with a Single Factor: Concepts of Random Variable, Probability, Density
Function, Cumulative Distribution Function. Sample and Population, Measure of Central
Tendency; Mean, Median And Mode, Measures of Variability, Concept of Confidence 06L
Level. Concept of Hypothesis Testing Type One and Type Two Error and Test Statistic,
Correlation And Regression Analysis, Analysis of Variance (ANOVA).
UNIT-03 Factorial Design: Classical Experiments: Factorial Experiments: Terminology: Factors, Levels,
Interactions, Treatment Combination, Randomization, Two-Level Experimental Designs for Two
Factors and Three Factors. Three-Level Experimental Designs for Two Factors and Three 09L
Factors, Factor Effects, Factor Interactions, Fractional Factorial Design, Saturated Designs,
Central Composite Designs.
UNIT-04 Response Surface Methodology and Robust Parameter Design: Response Surface
Methodology, Parameter Optimization, Robust Parameter Design, Main Effects and Interaction
Effects. Taguchi’s Quality Philosophy, Types of Orthogonal Arrays, Selection of Standard 09L
Orthogonal Arrays, Evaluation of Sensitivity to Noise. Signal to Noise Ratios for Static Problems:
Smaller-the-Better Type, Nominal-the –Better-Type, Larger-the-Better Type.
UNIT-05 Application of Experimental Design and Analysis: Types of Validity, Uncertainty and 06L
Reliability of Data. Application of Experimental Design for Manufacturing Process, Industrial
Problem, Other Engineering Problems
Course Outcomes
CO1: Establish basic concepts in experimental design
CO2: Identify the suitable technique for design of experiments
CO3: Improve the critical analysis and predict relation between parameters using statistical methods
CO4: Solve practical industrial problems using suitable design of experiments techniques
1. Design and Analysis of Experiments by Douglas C. Montgomery, John Wiley & Sons.
2. Design and Analysis of Experiments byAngela Dean Daniel Voss, Springer.
3.Experimental Design and Analysis by Howard J. Seltman, Carnegie Mellon University
4. Design and Analysis of Experiments by Gary W. Oehlert, W.H Freeman Publisher

Course Name: Advanced Mechanics of Solids
Course Code: ME-450
Course Type: Professional Elective-II
Course Objectives
 To impart concept of state of stress, and Compatibility conditions.
 To introduce the concept of energy methods.
 To enable the students to learn bending of curved bars and unsymmetrical bending.
Unit-01 Analysis of Stress
State of Stress, Equality of Cross Shear, Stress Invariants, Principal Planes, Cauchy’s Stress 06L
Quadric, Octahedral Stresses Lame's Ellipsoid, Differential Equation of Equilibrium, Airy’s
Stress Function and its Importance.
Unit-02 Analysis of Strain
Strain Analysis: Deformations, Deformations in the Vicinity of a Point, Strain of a Line Element,
Final Direction of a Linear Element, State of Strain at a Point, Shear Strain Components, 06L
Principal Axes of Strain and Principal Strains, Plane State of Strain, Plane Strains in Polar
Coordinates, Compatibility Conditions, Strain Deviator and its Invariants.
Unit-03 Energy Methods
Principle of Stationary Potential Energy, Castigliano’s Theorem of Deflection, Castigliano’s
Theorem on Deflection for Linear Load-Deflection, Strain Energy for Axial Loading, Strain 09L
Energies for Beams, Strain Energy for Torsion, Fictitious Load Method, Statistically
Indeterminate Structures.
Unit-04 Bending of Curved Bars
Stresses in Curved Bars, Division of Curved Beams on the Basis of Radius of Curvature,
Bending of Beams with Initial Curvature, Beams with Large Radius of Curvature, Values of Link 09L
Radius for –Rectangular, Trapezoidal, Circular, T, I, and Triangular Section, Position of Neutral
Axis, Stresses in a Crane Hook, Variation of Stresses Across the Section.
Unit-05 Unsymmetrical Bending and Shear Center
Definitions, Product of Inertia, Parallel Axis Theorem of Product of Inertia, Unsymmetrical 06L
Bending, Stresses due to Unsymmetrical Bending, Combined and Axial Loads, Shear Center
for Symmetrical Section, Equal Leg Angle Section and Channel Section.
Course Outcomes
Upon Successful Completion of The Course, The Students will be able to
CO1: Understand the concept of state of stress, strain, and significance of compatibility conditions.
CO2: Understand The concept of energy methods for solving problems.
CO3: Understand the theory of bending of curved bars for solving problems.
CO4: Learn the underlying theory of unsymmetrical bending and concept of shear centre.
Books And References
1. Advanced Mechanics of Solids by L.S Srinath, Mcgraw Hill.
2. Theory of Elasticity by Timoshenko and Goodier, Mcgraw Hill.
3. Mechanics of Materials by Beer & Johnston, Mcgraw Hill.
4. Strength of Materials by Crandal, Mcgraw Hill Publications.

Course Name: Product Design and Development
Course Code: ME-451
Course Type: Professional Elective - II
Course Objectives
 To make student confident in their own abilities to produce a new product.
 To provide awareness about the role of various functions such as marketing, finance, industrial design, production etc. in product
development.
 To enable students to understand the basics of engineering and production in producing a new product.
 To enhance the ability to coordinate multiple, interdisciplinary tasks in order to achieve a common objective
UNIT-01 Introduction: Introduction and Significance of Product Design, Product Design andDevelopment
Process, Sequential Engineering Design Method, Challenges of Product Development, Concept 06L
Development, Product Development and AMF Development Process, AMF Organizations.
UNIT-02 Product Planning and Identifying Customer Needs: Product Planning Process, Interpret Raw
Data in terms of Customers Need, Organize Needs in Hierarchy and Establish the Relative
Importance of Needs: Assessing Needs & Impact of Industrial Design, Industrial Design Process 09L
and Management, Assessing Quality of Industrial design.
UNIT-03 Concept Generation: Activities of Concept Generation, Clarifying Problem, Concept Selection:
Overview, Concept Screening and Concept Scoring, Methods of Selection, Concept Testing, 06L
Product Architecture, Industrial Design.
UNIT-04 Embodiment Designand Detailed Design: Design for Prototyping& Manufacturing, Robust
Design, Design for Manufacturing, Detailed Drawings and Specifications, Life Cycle 09L
Assessment.
UNIT-05 Intellectual Property and Environmental Guidelines: Elements and Outline, Patenting
Procedures, ClaimProcedure, Design for Environment: Impact, Regulations from Government, 06L
ISO System.
Course Outcomes
CO6: Distinguish different product development processes.
CO1: Distinguish associated engineering information with the product developmentprocesses.
CO2: Think about the sustainable design of a product and processes for competitive market.
CO3: Manage, construct and defend product data and its supporting technologies for its development to disposal.
1. Product Design and Development by Karl Ulrich and Steven D. Eppinger, Tata McGraw-Hill Education.
2. Product Design by K. Otto and K. Wood, Pearson Education.
3. Handbook of Materials for Product Design by C. A. Harper, McGraw-Hill.
4. Product Design: Creativity, Concepts and Usability by Prashant Kumar, PHI.
5. Engineering Design, by George E. Dieter and Linda C. Schmidt, McGraw-Hill Education.

Course Name: Industrial and Engine Tribology
Course Code: ME-452
Course Objectives
 To impart knowledge about the surface topography, modification and its measurement
 To introduce the fundamental concepts of friction and wear of mechanical components
 To enable the students the types of lubrication
 To divulge to the students the factors that causes the wear and friction of engineering components
Number
UNIT-01 Introduction:Tribology Fundamentals, General Tribological Considerations in Design and Industry,General
Tribological considerations in the design of Mechanical and Engine components Surface Topography and its
Measurement, Quantifying Surface Roughness, Statistical Methods of Surface Texture Assessment, Surface 06L
Modifications and Surface Coatings, Measurement of Surface Roughness.
UNIT-02 Friction:Theories of Friction, Sliding Friction, Rolling Friction, Friction Characteristics of Common Metals and
Non-Metals, Friction under Different Environments, Friction Losses in Engines, Engine Design Parameters
Based on Friction, Friction in Extreme Conditions 06L
UNIT-03 Wear:Wear theories, Types of wear and their mechanisms; Factors affecting wear; selection of materials for
different wear situations; Measurement of wear; Wear models asperity contact, constant and variable wear
rate; Geometrical influence in wear models; Wear damage; Tribometers and tribometry; Wear in various 09L
mechanical components; Engine wear mechanisms; Wear controlling techniques-wear resistant materials and
coatings and failure mode analysis
UNIT-04 Lubrication and Lubricants:.Lubrication regimes;Classification of Lubricants, Properties of Gear Oil and
Engine Oil, Lubrication System, Lubricant Monitoring and Testing, Ferrography and Other Rapid Testing
Methods for Lubricants, Contamination. Basic Concepts of Lubrication, Lubrication Regimes in IC Engine
Micro and Nano tribology; Hydrodynamics, Generalized Reynolds equation; Slider, fixed & pivoted bearings;
Hydrodynamic journals bearings; Short and finite bearings, Thrust bearings, sintered bearing, non-circular 09L
bearings and multi side surface bearings. Hydrostatic bearing -basic concepts, bearing pads, flat, conical and
spherical pad thrust bearing, multi- recess journal and thrust bearings, air and gas lubricated bearings.
UNIT-05 Engine Tribology: General Tribological Considerations in Engine Components Like Bearings, Gears, Cams,
Followers, Reciprocating Parts etc., Engine Bearings, Engine Lubrication and Its Types, Lubrication of Cam-
Follower and Valve Train Mechanism, Valve Wear, Failure of Cam and Follower, Friction and Wear of Cylinder 06L
Liner Piston Ring Arrangement.
Course Outcomes
CO1: understand the concepts related to friction, wear and lubrication.
CO2: know about the types of wear and their identification and estimation.
CO4: understand the need and requirement of lubrication and mechanisms.
CO5: recognize the importance of various components of the engine
1. Engine Tribology by C M Taylor, Elsevier
2. Applied Tribology - Bearing Design and Lubrication by Michael M Khonsari, Wiley
3. Engineering Tribology by John William, Cambridge University Press.
4. Friction and Lubrication by Bowden F.P. & Tabor D., Heinemann Edu. Books
5. Engineering Tribology by Stachowiak and Batchelor, Elsevier Limited

Course Name: Condition Monitoring and Diagnostics
Course Code: ME-453
Course Type: Professional Elective II
Course Objectives
 To impart knowledge about plant maintenance and faults diagnosis systems
 To introduce various condition monitoring techniques for faults diagnosis
 To enable for the use of modern technological approach for monitoring the health of the machinery system
UNIT-01 Introduction: Maintenance – Objectives – Types – Concepts and Economic Benefits, Types of
Maintenance; Preventive and Corrective Maintenance; Preventive Maintenance – Time Based &
Condition Based Condition Monitoring; Cost Effectiveness &Performance Monitoring. Different 06L
Condition Monitoring Techniques(On Line and Off-Line Techniques)
UNIT-02 Fault Identification: Various Techniques For Fault Detection; Visual Inspection; Crack
Detection Techniques Like Magnetic Crack Detection, Radiography; Oil Analysis; Wear Particle
Analysis; SOAP, Ferrography; Ultrasonic Crack Detection, Thermography. Non-Destructive 09L
Techniques – Important Features, Types of Defects Detected by NDT – Visual, Dye
Penetration, Acoustic Emission And Its Applications, X-Ray, Radiographic, Magnetic Flux Test
etc, Application of NDT Techniques
UNIT-03 Vibration Monitoring Methods: Vibration Data Collection; Techniques; Instruments;
Transducers; Vibration Analysis of Rotating Machines and Mechanical Systems. Faults 09L
Diagnosed by Vibration Analysis. Noise Monitoring. Temperature Monitoring, Pressure
Monitoring
UNIT-04 Signal Processing: Signature Analysis and their Significance, Signal Analysis, and Computer
Aided Data Acquisition, Time Domain Signal Analysis, Frequency Domain Signal Analysis, 06L
Spectrum Analysis; Fault Detection Transducers and Instrumentation.
UNIT-05 Applications: Applications of Condition Monitoring in Mechanical Systems, Cutting Tools and
Machine Tools Condition Monitoring, IC Engine Condition Monitoring, Power Plant Condition 06L
Monitoring, 3D Printing Condition Monitoring, Rotating Machines Condition Monitoring.
Course Outcomes
CO1: Understand and apply the maintenance scheme to various problems in the industrial sectors
CO2: Analyze for faults and machine condition monitoring and faults diagnostics
CO3: Emphasizes on case studies with the use of modern testing equipment and analyze to identify the faults in
Machines
1. Mechanical Faults Diagnostics and Condition Monitoring by R. A. Colacott, Springer.
2. Handbook of Condition Monitoring by B.K.N. Rao, Elsevier.
3. Engineering Condition Monitoring Practice, Methods and Applications by Barron, R., Addison, Weslay Longman.
4. Condition Monitoring for Engineering Services by Armstrong, J.H, Spon Press.
5. Machinery vibration analysis and predictive maintenance by P Girdhar, Elsevier.

Course Name: Mechanics of Composite Materials
Course Code: ME-454
Course Type: Professional Elective -II
Course Objectives
 To impart basic knowledge of composite materials and their mechanics.
 To introduce the concept of strength and failures of composites.
 To enable the students to have analytical solutions for the underlying classical lamination theory.
UNIT-01 Introduction
Definition, Characteristics and Classification of Composites, Mechanical Behavior and Basic
Terminology, Multi-axial Stress Components and Stress Transformation; Multi-Axial Strain 06L
Components and Strain Transformation, Stress-strain relation.
UNIT-02 Elastic Behaviour of Uni-Directional Composite Lamina:

Micro-mechanics: properties and geometric characteristics of fibre and matrix, relation to overall
elastic property of lamina; Macro- mechanics: stress-strain relations for anisotropic materials; 09L
transformation of stress, strain and elastic parameters for lamina.
UNIT-03 Strength of Uni-Directional Composite Lamina:

Micro-mechanics: failure mechanism under longitudinal or transverse tension loading and shear
09L
loading; Macro-mechanics: failure theories for strength prediction. 
UNIT-04 Elastic Behaviour of Multi-Directional Laminates:

Lamination theory: layup arrangements for laminates and implications for elastic property of the
06L
composite; Sandwich plates.
UNIT-05 Failure Analysis of Multi-Directional Laminates: 06L

Stress analysis for first ply failure; Progressive and ultimate failure; Design considerations
Course Outcomes
Upon Successful Completion Of The Course, The Students Will Be Able To
CO1: Understand the composite materials, their classification and applications.
CO2: Learn the stress strain relations for anisotropic materials.
CO3: Understand the concept of strength of composites and associated failure criteria.
CO4: Understand classical lamination theory and elasticity approach to stiffness of composites.
Books And References
1. Mechanics of Composite Materials by Robert M. Jones, CRC Press.
2. Principles of Composite Material Mechanics by Ronald F. Gibson, CRC Press.
3. Mechanics of Composite Materials with MATLAB by George Voyiadjisand Peter Kattan, Springer.

Course Name: Mechatronics and Robotics
Course Code: ME- 455
Course Objectives
 To impart knowledge and use of mechatronic system and different types of sensors and actuators.
 To introduce the fundamentals of microprocessors, microcontrollers and PLCs and their architecture.
 To impart the knowledge of robotics, robotic programming and robot vision.
UNIT-01 Fundamentals of Mechatronics: Definition, Applications, Block Diagram of Mechatronic System,

Functions of Mechatronics Systems, Benefits of Mechatronics in Manufacturing. Analog Devices, Signal 03L
Conditioning, Digital Electronics, Data Acquisition systems
UNIT-02 Sensors and Actuators: Static characteristics of sensors and actuators, Position, Displacement and
Proximity Sensors, Force and torque sensors, Pressure sensors, Flow sensors, Temperature sensors,
Acceleration sensors, Level sensors, Light sensors, Smart material sensors, Micro and Nano sensors,
Selection criteria for sensors, Actuators: Electrical Actuators (Solenoids, Relays, Diodes, Thyristors,
09L
Triacs, BJT, FET, DC motor, Servo motor, BLDC motor, AC motor, Stepper motors), Hydraulic and
Pneumatic actuators, Design of Hydraulic and Pneumatic circuits, Piezoelectric actuators, Shape
memory alloys.
Unit-03 Microprocessors, Microcontrollers and Programmable Logic Controllers: Logic Concepts and
Design, System Interfaces, Communication and Computer Networks, Fault Analysis in Mechatronic
Systems, Synchronous and Asynchronous Sequential Systems, Microcontrollers, Programmable Logic 09L
Controllers (PLCs): Architecture, Basics of PLC Programming, Logics, Timers and Counters, PLC
Applications
UNIT-04 Introduction of Robotics: Definition of a robot, types of robotic joints and motions, classifications of
robot based on: Physical configurations, actuators and motion control; Terminologies used for robotics 03L
specification and selection for industrial applications; Types of end effectors.
UNIT-05 Robot Kinematics and Dynamics: Homogeneous co-ordinates and co-ordinate transformations,
kinematic parameters, use of Denavit-Hartenberg representation for finding arm equation of robotic 06L
arms, forward and inverse kinematics for basic industrial robotic configurations, SCARA configurations,
Basics of Robot Dynamics.
UNIT-06 Robot Vision and Programming: Sensing and digitization of vision data, image processing: image
data reduction, segmentation, feature extraction, object recognition, and training of vision system, 06
Robot programing methods, Robot Programming Languages.
Course Outcomes
CO1: Generate conceptual design for mechatronics products based on potential customer requirements
CO2: Select appropriate sensors and actuators and devise a system for collecting information about processes
CO3: Demonstrate the concepts of kinetics & dynamics of robot, and Identify an application of robots in manufacturing.
1. Mechatronics: Electronic control systems in Mechanical and Electrical Engineering by W. Bolton, Pearson Edu.
2. Introduction to Mechatronics & Measurement Systems by David G Alciatore and Michael B Histand, McGraw-Hill.
3. Industrial Robotics: Technology, Programming and Applications by M.P. Grover and N. G. Odrey, TMH Edu. India
4. Robotics: Control and Programming by J. Srinivas, Rao V. Dukkipati and K. Ramji, Alpha Science International.

Course Name: Computer Integrated Manufacturing Systems
Course Code: ME-440
Course Type: Professional Elective-III
Course Objectives
 To impart knowledge of different types of planning and controls and their computerized execution and monitoring.
 To introduce the concepts of flexible manufacturing system and automated guided vehicle system.
 To enablethe students to find how the system can be automated at low cost.
UNIT-01 Fundamentals of Manufacturing Systems: Manufacturing Systems: Concept Objectives,

Types and Trends; Concepts of Mechanization, Automation and Integration 03L
Functions and Components of CIM System: Concept of CAD/CAM and CIMS
UNIT-02 Software Technology for CIM System: Business Database System: File processing, Data
Processing and Database Design, File Organization and Relational Analysis; Decision Support 06L
System, Personal/Distributed Computing and Local Area Network
UNIT-03 Planning and Scheduling Functions in CIM System: Aggregate Production Planning (APP),
Master Production Schedule (MPS), Material Requirement Planning (MRP), Capacity 06L
Requirement Panning (CRP), Manufacturing Resource Planning (MRP-II), and Enterprise
Resource Planning (ERP).
UNIT-04 Group Technology and Cellular Manufacturing: Concept of Group Technology and its
Application, classification and Coding Techniques; Clustering Techniques, Part Families, Parts
Classification and Coding, Part Coding System, Production Flow Analysis, Composite Part 12L
Concept, Machine Cell Design and Layout, Quantitative Analysis in Cellular Manufacturing –
Rank Order Clustering Method, Arranging Machines in a GT Cell, Hollier Method.
UNIT-05 Advanced Manufacturing Systems: Just-In-time Production Systems, Lean Manufacturing
systems, Agile Manufacturing systems, Reconfigurable Manufacturing Systems, Holonic 06L
Manufacturing Systems and Agent-Based Manufacturing Systems
Course Outcomes
CO1: Do process planning, master scheduling and capacity planning for an organization and use computer for them.
CO2: Learn Group Technology and Cellular Manufacturing Concept.
CO3: Apply the concepts of flexibility in manufacturing systems.
1. Automation, Production Systems & Computer Integrated Manufacturing by M. P. Groover, Prentice Hall India.
2. Principles of Computer Integrated Manufacturing by Kant Vajpayee, Prentice Hall India.
3. Computer Aided Manufacturing by P.N. Rao, N.K. Tewari & T.K. Kundra, Tata McGraw Hill Publishing Company.
4. CAD/CAM/CIM by P. Radhakrishnan, S. Subramanyan and V.Raju, New Age International Publisher.
5. Computer-Integrated Manufacturing by James A. Rehg and Henry W. Kraebber, Pearson Education

Course Name: Maintenance Engineering
Course Code: ME-441
Course Type: Professional Elective –III
Course Objectives
 To perceive the role and involvement of maintenance towards achieving competitive advantage in the industries.
 To understand the key concept sand issues of maintenance in both manufacturing and service organizations.
 To know about the inspection, testing and quality control in the field of maintenance.
Unit
Course Content Lectures
Number
UNIT-01 Introduction: Maintenance Concept, Need of Maintenance Management, Objectives and Characteristics of 03L
Maintenance Function, Organizational Set up of the Maintenance System, Maintenance function;
Maintenance cycle; Planning, Execution, Recording and Evaluation, Benefits and Effects of Maintenance.
UNIT-02 Maintenance Organising and Control: Present Material Policy for Maintenance, Classification of Spare, 06L
Spare Parts Provisioning, Reliability and Quality of spares,Inventory Control of Spare Parts,ABC Analysis,
FSN Approach, XYZ Approach, VED Approach, Work Planning and Scheduling, Long-Range and
Short Range Planning; Man Power Allocation; Estimation of Maintenance Work and Control.
UNIT-03 Reliability of Engineering Systems: Reliability and Maintainability, Quantitative Estimation of Reliability 09L
of Parts, Maintainability, Failure, Availability, Reliability Structure and Optimum Design Configuration of
Series& Parallel, Combinations, Redundancy Structure, Mean Time to Failure (MTTF), Mean Time
between Failure (MTBF), Mean Time to Repair (MTTR), Statistical Estimation of Reliability Indices,
Machine Failure Pattern: Breakdown Time Distribution,Preventive andPredictive Maintenance
UNIT-04 Maintenance in Service: Maintenance Requirement: Mechanical, Electrical, Process and Service 06L
Equipment; Maintenance Aspect: Lubrication, Control of Corrosion, Condition Monitoring Techniques,
Computerized Maintenance Information System,Methods andInstruments for Condition
Monitoring,Condition Monitoring,Fault Detection, Vibration Monitoring,Noise Monitoring,Wear and Debris
Analysis, Signature Analysis, NDT Techniques in Condition Monitoring. Maintenance Decision Making
UNIT-05 Inspection, Testing and Quality Control: Inspection, Testing and Quality Control inMaintenance, 06L
Definitions, Importance ofInspection and Testing in Maintenance, Inspection Frequency, Destructive, Non-
destructive andSemi-destructive Testing, Liquid Penetration Test, Magnetic Particle Test, Ultrasound
Testing, Vibration Analysis, Definition and Importance of Quality Control in Maintenance, Statistical Quality
Control Tools and Techniques.
UNIT-06 Economic Aspect of Maintenance: Cost of Machine Breakdown, Estimation of Life Cycle Cost, Impact 06L
of Maintenance Cost, Application of Work Measurement in Maintenance, Selection of Manpower
andTraining, Incentive Payment of Maintenance Workers, Cost Reduction Approach to Spares, Reliability
and Quality of Spares, Inventory Control of Spare Parts.
Course Outcomes
CO1: Get thoroughthe knowledge of the overall understandingof maintenance, reliability and planning.
CO2: Applysystematictools/techniques to the fault examining of various machines andequipment.
CO3: Apply engineering concepts for improvement of equipment and procedures in order to enhance their
Maintainability, reliability and availability.
1. Industrial Maintenance Management by S.K.Srivastava, S. Chand & Company Ltd.
2. Maintenance and Spare Parts Management by P. Gopal Krishnan and A. K. Banerji, PHI.
3. Principlesof Planned Maintenance byR. H. Clifton, Edward Arnold.
4. A text Book of Reliability and Maintenance Engineering by Alakesh Manna, I.K.International Publishing House.
5. Planning and Control of Maintenance Systems: Modelling and Analysis by S. O. Duffuaa and A. Raouf, Springer.

Course Name: Supply Chain Management
Course Code: ME-442
Course Objectives
 To introduce the major building blocks, major functions, major business processes, performance metrics, and major
decisions (strategic, tactical, and operational) in supply chain networks.
 To enable the role of stochastic models (Markov chains, queuing networks); optimization models and simulation in supply chain
planning and decision-making.
UNIT-01 Introduction
Logistics Management and Supply Chain management: Definition, Evolution, Importance, The Concepts
of Logistics, Logistics Relationships, and Functional Applications, HR, Marketing, Operations, Finance.
Logistics Organization, Logistics in Different Industries, Fundamentals of Supply Chain and Importance,
Development of SCM concepts and Definitions Supply chain strategy, Strategic Supply Chain 06L
Management and Key Components. Drivers of Supply Chain Performance: Key Decision Areas:
External Drivers of Change
UNIT-02 Logistics Activities
Functions, Objectives, Solution. Customer Service, Warehousing and Material Storage, Material
Handling, Order Processing and Information handling .Transportation and Packaging. Thirdparty and
Fourth Party Logistics, Reverse Logistics, Global Logistics, Modeling Logistics Systems, Simulation of 06L
Logistic Systems, Dimensions of Logistics & SCM, The Macro Perspective and the Macro Dimension,
Logistic System Analysis Strategy, Logistical Operations Integration, Customer service, Supply Chain
Relationships
UNIT-03 Procurement and Operations Planning
Forecasting Requirements and Techniques, Forecasting Accuracy, Collaborative Planning, Forecasting
and Replenishment decisions, Procurement Strategies, E-commerce and Procurement, Dimensions of 09L
Product Quality, Quality Standards, Manufacturing Perspectives, Manufacturing Strategies, Total Cost
of Manufacturing, Lean Systems, Six Sigma
UNIT-04 Supply Chain Framework and Network Design
Framework and Role of Supply Chain in e-business and b2b practices, Value of Information in Logistics
& SCM - E-logistics, E-Supply Chains, International and Global Issues in Logistics, Role of Government
in International Logistics, Principal Characteristics of Logistics in Various Countries and regions, 09L
Enterprise Facility Network and Location Decisions.
UNIT-05 Supply Chain Risk Management
Concept of Supply Chain Risk, Product Complexity, Regulatory, Environmental, Financial Resource 06L
Availability, Outsourcing, Security, Developing a secure supply chain, Rationale for Supply Chain
Protection, Crossborder Operations.
Course Outcomes
CO1: Will gain knowledge into the different supply chain functions, such as inventory management, finance, operations management,
transport and logistics, etc.
CO2: Apply logistics and purchasing concepts to improve supply chain operations
CO3: Identify and Analyze Business Models, Business Strategies and, corresponding competitive advantage
CO4: Use critical thinking skills in business situations or cases.
1. Logistical Management by Bowersox, Mc-Graw Hill.
2. Supply Chain Management for Global Competitiveness by Sahay, Macmillan India.
3. Logistics and Supply Chain Management Cases and Concepts by Reguram, Macmillan India.
4. The Management of Business Logistics by Coyle, Bradi&Longby, West Publishing Co.
5. Operations and Supply Chain Management by Ravi Shankar, McGraw Hill Education.

Course Name: Total Quality Management
Course Code: ME-443
Course Type: Professional Elective III
Course Objectives
 To understand the concept of Quality in Manufacturing and Service units
 To understand the Implication of Quality in Business
 To have exposure to challenges in Quality Improvement Programs
Number
UNIT-01 Introduction: Evolution of Quality, Historical Perspectives, Relationship among Quality, Vision, Mission and
Objectives of an Organization, Role of Quality in a Corporate Structure of an Organization, Attributes of Product 06L
and Service Quality, Quality Characteristics: Quality of Design, Quality of Performance and Quality of
Conformance, Zero Defect and Continuous Improvement.
UNIT-02 Conceptualization of TQM: Introduction to Total Quality Management (TQM), Barriers to TQM, Benefits of
TQM implementation, Basic Approaches of TQM, TQM Models, Quality Information System and Planning, 06L
Importance of TQM in manufacturing and Service Industry.
UNIT-03 Organization Structure in TQM: Role of Top Management, Quality Council, Quality Circles, Organization Structure
for Quality Circles, Quality Policies, Role of Middle and Lower Management, Problem Solving Techniques. 06L
UNIT-04 Tools and Systems for Quality Management: Basic Tools: Cause & Effect Diagram, Flow Diagrams, Trend
Charts, Histogram, Scatter Diagram, Control Chart, Advanced Tools: Affinity Diagram, Inter Relationship
Diagram, Tree Diagram, Matrix Diagram, Process Decision Program Chart (PDPC) and Matrix Data Analysis,
Fault Tree Analysis, Quality Function Deployment (QFD):Definition and Phases in QFD , Taguchi Approach To 09L
Quality System Design, Six-sigma :Definition & Implementation Steps, Just In Time Production System, Quality
Production through JIT and Kanban, Failure Mode and Effect Analysis (FMEA): Scope, Mode, Illustrative
Example and Applications.
UNIT-05 Quality Assurance & Control: Causes of Quality Failure, Quality Assurance: Need and Various Elements in
Quality Assurance Programme, Quality Control- on Line and off Line, Statistical Concepts in Quality, Chance 06L
and Assignable Causes, Types and examples of Control Charts, Bench Making in Quality Management.
UNIT-06 Implementation and Need of ISO 9000: ISO 9000 – 2000 Quality System: Elements, Registration,
Documentation, Implemental Steps, Quality Audit, Product and Process Audit: Scope, Steps and Benefits. 03L
Course Outcomes
CO1: Identify the significance of quality in an organization
CO2: Apply the tools of quality improvement programs in an organization
CO3: Assess the benefits of implementing TQM Program in an organization
1. Total Quality Management by Dale H Besterfield, Pearson India.
2. Total Quality Management by N.V.R Naidu, G. Rajendra, New Age international Publication.
3. Total Quality management by L. Sugandhiand Samual Anand, PHI Publications.
4. Total Quality management by R.S Naagarazan, New Age international Publication.

Course Name: Manufacturing of Non-Metallic Products
Course Code: ME-444
Course Objectives
 To impart knowledge of different non-metallic materials, properties & their applications.
 To introduce different processing techniques for various non-metals.
 To enable students to select proper processing method suitable for product’s material and shape
UNIT-01 Introduction: Classification of Engineering Materials and Processing Techniques, Structure and 03L
Properties of Non-Metals.
UNIT-02 Shaping and Forming of Glass and Ceramics Products: Glass structure and properties,
Glass Melting and Forming, Glass Annealing, Ceramic Powder Preparation, Synthesis of 09L
Ceramic Powders, Fabrication of Ceramic Products from Powders: Pressing, Casting, Vapour
Phase Techniques, Sintering, Finishing, Machining,Ceramic Coatings,
UNIT-03 Shaping and Forming of Plastics and Rubber Products: Introduction to Plastic, Structure
and MechanicalProperties, Thermoplastics&Thermosets,Plastic Processing Techniques: 12L
Extrusion, Injection Moulding, Thermoforming, Compression Moulding. Transfer Moulding,
General behavior of Polymer melts, Machining of plastics. Types of Rubber and its Processing,
Shaping and Forming Processes for Rubber.
UNIT-04 Shaping and Forming of Polymer Matrix Composites Products: Classification of Composite
Materials, Properties of Composites, ProcessingMethods:Hand lay-up, Autoclaving, Filament
Winding, Pultrusion, Compression Molding, Pre-pegging, Sheet Molding Compounds etc., 06L
Process Capability and Application Areas of Various Techniques.
UNIT-05 Shaping and Forming of Ceramic Matrix Composites Products: Mechanical Properties of 03L
Ceramic Matrix Composites, Different Processing Techniques for Ceramic Matrix Composites,
Process Capability and Applications of Various Techniques.
UNIT-06 Secondary Processing of Composite Materials: Need of Secondary Operations, Different
Type of Secondary Operations, Machining and Drilling of Non-Metals, Machining Induced 03L
Damage, Different Methods of Reducing the Damage on Account of Secondary Processing.
Course Outcomes
CO1: Identify different non-metals and their suitability for various applications.
CO2: Select proper processing technique for a particular type of product and material.
CO3: Understand the properties and application of various non-metallic composites.
1. Manufacturing Processes for Engineering Materials by S.Kalpakjian, Addison – Wesley.
2. Composite Materials: Engineering&Sc. by F.L.Mathews and R.D. Rawlings, CRC press.
3. Polymer Science and Technology- Plastics, Rubber, Blends, and Composites by Ghosh, TMH
4. Glass Engineering Handbook by E. B. Shand, McGraw-Hill
5. Introduction to ceramics by Kingery, Bowen and Uhlmann, John Wiley & Sons publishers

Course Name: Additive Manufacturing Technology
Course Code: ME-445
Course Objectives
 To impart knowledge of different Additive Manufacturing Technologies& theirapplications.
 To introduce the concept of solid modeling, STL file generation and model slicing.
 To enable students to repair STL file, to generate proper tool path, to select proper AM method.
UNIT-01 Introduction: History andTypes of Additive Manufacturing Technologies,Traditional vs Additive

Manufacturing, Advantages and Applications of additive Manufacturing, Materials for Additive 03L
Manufacturing, AM Technology in Product Development.
UNIT-02 Data Processing for Additive Manufacturing: CAD Model Preparation, Part Orientation and
Support Generation,STL File Generation, Defects in STL Files and Repairing Algorithms, Model
Slicing: Slicing and various Slicing Procedures. Tool Path Generation, Additive Manufacturing 09L
Process Chain, Software for Additive Manufacturing Technology: MIMICS, MAGICS.
UNIT-03 Liquid Based and Solid Based Additive Manufacturing Technologies: Classification, Liquid
Based System, Stereolithography Apparatus (SLA): Principle, Process, Advantages and
Applications. Solid Based System, Fused Deposition Modeling: Principle, Process, Advantages 09L
and Applications. Laminated Object Manufacturing.
UNIT-04 Powder Based Additive Manufacturing Technologies: Materials, Powder Fusion Mechanism,
Process Parameters and Modeling, powder Handling, Selective Laser Sintering (SLS): Principle,
Process, Advantages and Application of SLS, Three-Dimensional Printing: Principle, Process, 09L
Advantages and Applications of 3-D Printing, Laser Engineered Net Shaping (LENS), Electron
Beam Melting.
UNIT-05 Problem Areas of Additive Manufacturing:Accuracy and Strength Issues of AM Parts, Surface
Roughness Problem in AM, Part Orientation and Other Issueslike build time, support structure, 06L
cost etc.,
Course Outcomes
CO1: Generate STL file from the solid model.
CO2: Select the areas where AM technologies can be implemented.
CO3: Identify the issues in additive manufacturing and rectify them.
1. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, by I. Gibson, D. Rosen
and B. Stucker, Springer.
2. Rapid Prototyping: Principles and Applications in Manufacturing by Chua C. K. and L. K. Fai, World Scientific Publishing Co., Inc.
3. Understanding Additive Manufacturing: Rapid Prototyping, Rapid Tooling, Rapid manufacturing by Andreas Gebhardt, Hanser
Publishers.

Course Name: Alternative Fuels Technology
Course Code: ME-460
Course Type: Professional Elective-IV
Course Objectives
 To impart the search of alternative fuel for future
 To introducethe types of alternative fuels and energy sources for IC engines
 To enable the understanding of non-convention fuel
UNIT-01 Need For Alternate Fuel : Availability and Properties of Alternate Fuels, General Use of Alcohols,
LPG, Hydrogen, Ammonia, CNG and LNG, Vegetable Oils and Biogas, Merits and Demerits of 06L
Various Alternate Fuels, Introduction to Alternate Energy Sources,like EV, Hybrid, Fuel Cell and
Solar Cars.
UNIT-02 Vegetable Oils as Fuels: Various Vegetable Oils and their Important Properties. Different
Methods of Using Vegetable Oils, Blending, Preheating Transesterification and Emulsification of
Vegetable Oils – Performance in Engines, Performance, Emission and Combustion 09L
Characteristics in Diesel Engines.
UNIT-03 Hydrogen as Engine Fuel: Production Methods of Hydrogen. Combustive Properties of

Hydrogen, Problems Associated with Hydrogen as Fuel and Solutions. Different Methods of 06L
Using Hydrogen in SI and CI Engines, Performance, Emission and Combustion Analysis in
Engines, Hydrogen Storage,Safety Aspects of Hydrogen.
UNIT-04 Alcohols as Fuels: Introduction to Alternative Fuels, Need for Alternative Fuels, Availability of
Different Alternative Fuels for SI and CI Engines, Alcohols as Fuels. Production Methods of
Alcohols, Properties of Alcohols as Fuels, Methods of using Alcohols in CI and SI Engines, 09L
Blending, Dual Fuel Operation, Surface Ignition and Oxygenated Additives, Performance
Emission and Combustion Characteristics in CI and SI Engines.
UNIT-05 Natural Gas, LPG and Biogas: Layout of an Electric Vehicle, Advantage and Limitations,
Specifications, System Components, Electronic Control System, High Energy and Power 06L
Density Batteries, Hybrid Vehicle, Fuel Cell Vehicles, Solar Powered Vehicles.
Course Outcomes
CO1: To understand the various alternative fuels available as alternative option
CO2: To know the extraction process of fuel from different sources
CO3: performance characteristics, combustion characteristics, emission characteristics, engine modifications required
1. Alternate Fuels by S. S. Thipse, Jaico Publications.
2. Alternative Fuels Guide Book by Richard. L. Bechfold, SAE International Warrendale.
3. Energy Today & Tomorrow by Maheswar Dayal, I& B Ministry Publication India.
4. Power Plant Engineering by Nagpal, Khanna Publishers.

Course Name: Renewable Sources of Energy
Course Code: ME-461
Course Objectives
 To impart the understanding of alternative source of energies.
 To introduce others form of energies.
 To enable the identification of technologies for effective utilization of renewable energy sources.
Number
UNIT-01 Introduction: Environmental Aspects of Energy Utilization, Renewable Energy Scenario in India and around the
World, Potentials, Achievements / Applications, Economics of renewable energy systems. Causes of Energy 03L
Scarcity, Solution to Energy Scarcity, Factors Affecting Energy Resource Development, Energy Resources and
Classification.
UNIT-02 Solar Thermal Energy Collectors: Types of Solar Collectors, Configurations of Certain Practical Solar Thermal
Collectors, Material Aspects of Solar Collectors, Concentrating Collectors, Parabolic Dish, Solar Collector
Systems, Solar Water Heating Systems, Passive Solar Water Heating Systems, Applications of Solar Water
Heating Systems, Active Solar Space Cooling, Solar Air Heating, Solar Dryers, Crop Drying, Space Cooing, Solar
Cookers, Solar Pond, Components of Solar Cell System, Solar Cell materials, Practical Solar Cells,
Characteristics of Solar Cells, Efficiency of Solar Cells, Photovoltaic Panels. 09L
UNIT-03 Hydrogen Energy: Benefits of Hydrogen Energy, Hydrogen Production Technologies, Hydrogen Energy Storage,
use of Hydrogen Energy, Advantages and Disadvantages of Hydrogen Energy, Problems Associated with 06L
Hydrogen Energy.
UNIT-04 Wind Energy: Windmills, Wind Turbines, Wind Resources, Wind Turbine.
Geothermal Energy: Geothermal Systems, Classifications, Geothermal Resource Utilization, Resource
Exploration, Geothermal Based Electric Power Generation, Associated Problems, environmental Effects.
Tidal Energy: Introduction, Tidal Energy Resource, Tidal Energy Availability, Tidal Power Generation in India, 09L
Energy Availability in Tides, Tidal Power Basin, Turbines for Tidal Power, Advantages and Disadvantages of Tidal
Power.
UNIT-05 Biomass Energy: Biomass Production, Energy Plantation, Biomass Gasification, Theory of Gasification, Gasifier
and Their Classifications, Updraft, Downdraft and Cross-draft Gasifiers, Fluidized Bed Gasification, Use of
Biomass Gasifier, Gasifier Biomass Feed Characteristics, Applications of Biomass Gasifier, Cooling and Cleaning
of Gasifiers. 09L
Biogas Energy: Introduction, Biogas and its Composition, Anaerobic Digestion, Biogas Production, Benefits of
Biogas, Factors Affecting the Selection of a Particular Model of a Biogas Plant, Biogas Plant Feeds and their
Characteristics.
Course Outcomes
CO1: Identify the different form of alternative energies
CO2: To know the extraction process of fuel from different sources
CO3: Realize the importace of search for future fuel
CO4: Identify future fuel for nation
1. Non-Conventional Energy Sources by Rai. G.D, Khanna Publishers
2. Renewable Energy Sources by Twidell, J.W. & Weir, Spon Ltd., UK, 2006.
3. Wind Energy Theory and Practice by Siraj Ahmed, PHI Learning.

Course Name: Exergy Analysis of Thermal Systems
Course Code: ME-462
Course Type: Professional Elective- IV
Course Objectives
 To impart knowledge to the students about the exergy analysis
 To provide the concept, applications, importance of energy
 To familiarize the students about the exergy, and its applications in real life situations
UNIT-01 Basic Concepts of Exergy Analysis: Review of Laws of Thermodynamics, Entropy, 06L
Thermodynamics Theorems-I and II,Exergy.
UNIT-02 Exergy Concepts: Classification of Forms of Exergy, Physical Exergy, Chemical Exergy, 06L
Exergy Concepts for Closed System Analysis.
UNIT-03 Exergy Analysis:Quality of Energy, Importance of Exergy Analysis, Available Energy Referred to a 09L
Cycle, Availability in a Finite Process, Available Energy From a Finite Energy Source, Demonstration
of Quality of Energy Based on Exergy.
UNIT-04 Exergy Analysis of Processes: Expansions Process, Compression Processes, Heat Transfer 06L
Process, Mixing & Separation Process, Chemical Process Including Combustion
UNIT-05 Energy Analysis of Thermal Systems: Gas Turbine Plant, Thermal Power Plant, Refrigeration 09L
Unit, Heat Exchanger.
Course Outcomes
CO1: Acquire an overview of exergy analysis of thermal components
CO2: Able to compute exergy analysis of different processes and power and refrigeration cycles
CO3: Calculate exergy-economics costing of thermal components
1. The Exergy Method of Thermal Plant Analysis by J. J.Kotas, Krieger Publishing Corp. USA
2. Advanced Thermodynamics for Engineers by Kenneth Wark, McGraw Hill Publishing Co. Ltd.
3. Fundamentals of Engineering Thermodynamics by Michel J. Moran, Howard N. Shapiro, Daisie D.Boettner, Margaret B. Bailey,
John Wiley & Sons, Inc.
4. Steam Power Engineering, Thermal and Hydraulic Design Principles by Seikan Ishigai, Cambridge Univ. Press.

Course Name: Computational Fluid Dynamics
Course Code: ME-463
Course Type: Professional Elective- IV
Course Objectives
 To impart knowledge to the students about fundamental of Computational fluid Dynamics
 To provide the concept, applications, importance of Computational fluid Dynamics
 To familiarize the students about the methodology of solving problem with CFD..
UNIT-01 Introduction to CFD: Role of Computational Fluid Dynamics (CFD) and its Application, FDM and FVM,
Governing equations (GE’s) of Fluid Dynamics, Modeling of Flow, Control Volume Concept, Substantial
Derivative, Physical Meaning of the Divergence of Velocity, Continuity Equation, Momentum Equation, Energy 06L
Equation and its Conservation Form, Equation for Viscous Flow (Navier-Stokes equation), Equation for Inviscid
fFlow (Euler equation), Different Forms of GE’s, Initial and Boundary Condition.
UNIT-02 Finite Difference Method: Discretization of Derivatives by Taylor Series , Forward, Backward and Central
Difference Quotients of First and Higher Order Derivatives, Difference Equations, Explicit and Implicit Methods,
Consistency and Stability of Finite Difference Equations. Application of Different Boundary Conditions. Pressure 03L
Correction Method, Simple Algorithm.
UNIT-03 Applications of FDM: Motion of a Sphere Falling in a Fluid Medium, Solution of One and Two Dimensional
Unsteady Heat Equations by Explicit and Implicit Method, Thomas Algorithm, Solution of Steady Two
Dimensional Heat Equation by Iterative Procedure, Alternating Direction Implicit Method, Solution of Steady Two 09L
Dimensional Steady Boundary Layer Equation Using Similarity Solution, Couette Flow Solution.
UNIT-04 FVM for Diffusion Problems: FVM for 1D Steady State Diffusion, 2D Steady State Diffusion, Solution of
Discretized Equation-TDMA Scheme. 06L
UNIT-05 FVM for Convection-Diffusion Problems: FVM for 1D Steady State Convection-Diffusion, Central Differencing
Scheme, Conservativeness, Boundedness, Transportiveness, Upward Differencing Scheme, Hybrid Differencing 06L
Scheme for 2D and 3D Convection-Diffusion, Power Law Scheme, QUICK Scheme.
UNIT-06 FVM for Unsteady Flows: 1D Unsteady Heat Equation (Explicit, Crank-Nicolson, Fully implicit schemes), Implicit
Methods for 2D and 3D Problems, Discretization of Transient Convection-Diffusion Problems, Solution Procedure 06L
for Transient Unsteady Flow Calculations (Transient SIMPLE, Transient PISO Algorithms).
Course Outcomes
CO1: Acquire an overview of CFD and its methodology.
CO2: Able to formulate and solve problems with CFD.
CO3: Generate algorithms for typical CFD problem.
1. Computaional Fluid Dynamics by Anderson Jr, McGraw Hill.
2. An Introduction to Computational Fluid Dynamics: The Finite Volume Method by H.K. Versteeg and W. Malalasekara, Pearson
Education.
3. Computational Fluid Flow and Heat Transfer by K. Muralidhar and T. Sundararajan, Narosa Publishing.
4. Numerical Heat Transfer and Fluid Flow by S.V. Patankar, McGraw-Hill.
5. Computational Techniques for Fluid Dynamics Volume I & II by C.A.J. Fletcher, Springer.

Course Name: Design of Heat Exchangers
Course Code: ME-464
Course Objectives
 To impart knowledge on the basic design methodologies of heat exchanger
 To understand the principles and design methodologies of double pipe, shell and tube and compact heat exchangers
 To introduce heat transfer enhancement technique and performance evaluation of heat exchangers
UNIT-01 Different Classification and Basic Design Methodologies for Heat Exchanger:
Classification of Heat Exchanger, Selection of Heat Exchanger, Overall Heat Transfer
Coefficient, LMTD Method for Heat Exchanger Analysis of Parallel, Counter, Multi-pass and 09L
Cross Flow Heat Exchanger, e-NTU Method for Heat Exchanger Analysis, Fouling, Cleanness
Factor, Percent Over Surface, Technique to Control Fouling, Additives, Rating and Sizing
Problems, Heat Exchanger Design Methodology.
UNIT-02 Design of Double Pipe Heat Exchangers: Thermal and Hydraulic Design of Inner Tube and 06L
Annulus, Hairpin Heat Exchanger with Bare and Finned Inner Tube, Total Pressure Drop
UNIT-03 Design of Shell and Tube Heat Exchangers: Basic components, Basic Design Procedure of 09L
Heat Exchanger, TEMA Code, J-factors, Conventional Design Methods, Bell-Delaware Method.
UNIT-04 Design of Compact Heat Exchangers: Heat Transfer Enhancement, Plate Fin Heat 06L
Exchanger, Tube Fin Heat Exchanger, Heat Transfer and Pressure Drop
UNIT-05 Heat Transfer Enhancement and Performance Evaluation: Enhancement of Heat Transfer, 06L
Performance Evaluation of Heat Transfer Enhancement Technique. Introduction to Pinch
Analysis.
Course Outcomes
CO1: Understand the basic design methodologies of heat exchangers
CO2: Understand the design methodologies of double pipe, shell and tube and compact type heat exchangers
CO3: Analyze the performance of heat exchangers with different heat transfer enhancement techniques
1. Heat Exchanger Selection, Rating and Thermal Design by Sadik, Kakac, CRC Press
2. Fundamentals of Heat Exchanger Design by Ramesh K Shah, Wiley Publication
3. Compact Heat Exchangers by Kays, V.A. and London, A.L., McGraw Hill
4. Heat Exchanger Design Handbook by Kuppan, T, Macel Dekker, CRC Press
5. Process Heat transfer by Donald Q Kern, McGraw Hill

Course Name: Design of Air Conditioners
Course Code: ME-465
Course Objectives
 To introduce the advanced Psychrometric processes and study of comfort and design condition of air conditioners.
 To impart knowledge about load calculations for the designing of air conditioners.
 To impart knowledge for the design of air conditioning apparatus.
 To understand the design principles of transmission and air distribution system
Number
UNIT-01 Recapitulation of Psychrometric and Air Conditioning: Recapitulation of Psychrometric Processes, Air Washer,
Method of production of Dry Air, Chemical Dehumidification, Summer Air Conditioning System, Winter Air
Conditioning System, Solar Assisted Desiccant Air Conditioning System
Comfort-Physiological Principles, IAQ and Design Conditions: Introduction, Mechanical Efficiency of Humans,
Metabolic Heat, Energy Balance and Models, Energy Exchange with Environment, Thermoregulatory Mechanisms,
Heat Transfer Coefficients, Environmental Parameters, Application of Physiological Principles to Comfort Air 09L
Conditioning Problems, Prediction of Thermal Comfort and Thermal Sensation, Standard Effective Temperature and
Modified Comfort Chart, Effect of Other Variables on Comfort, Indoor Air Quality, Inside Design Conditions, Outside
Design Conditions, Choice of Supply Design Conditions, Critical Loading Conditions
UNIT-02 Solar Radiation: Introduction to Irradiation Geometry and Various Related basic and Derived Angle, Direct Solar
Radiation on a Surface, Diffuse Sky Radiation on a Surface, Heat Gain through Glass, Shading From Reveals,
Overhangs and Fins, Effect of Shading Device
Heat Transfer through Building Structures: Fabric Heat Gain, Overall Heat-Transmission Coefficient, Periodic 09L
Heat Transfer through Walls and Roofs, Methods to Evaluate Heat Transfer through Walls and Roofs, Natural
Ventilation through Infiltration, Passive Heating and Cooling of Buildings.
UNIT-03 Load Calculations and Applied Psychrometrics: Preliminary Considerations, Internal Heat Gains, System Heat Gains,
Break-up of Ventilation Load and Effective Sensible Heat Factor, Cooling Load Estimate, Heating Load Estimate,
Psychrometrc Calculations for Cooling, Selection of Air Conditioning Apparatus for Cooling and Dehumidification, 06L
Evaporative Cooling, Building Requirements and Energy Conservation in Air Conditioned Buildings.
UNIT-04 Design of Air Conditioning Apparatus: Air Conditioning Apparatus, Heat and Moisture Transfer in Air Conditioning
Apparatus, Coil Equipment-Design of Cooling and Dehumidifying Coils, Optimal Design of Cooling and Dehumidifying
Coils, Spray Equipment-Design of Air washers and Cooling Towers 06L
UNIT-05 Transmission and Distribution of Air: Room Air Distribution, Total, Static and Velocity Pressures, Friction Loss in
Ducts, Dynamic Losses in Ducts, Air Flow through a Simple Duct System, Air-Duct Design, Processing, Transmission 06L
and Distribution of Air in Clean Rooms, Air Locks, Air Curtains and Air Showers
Course Outcomes
CO1: Understand the principle of comfort Physiology, IAQ and design conditions of the air conditioners
CO2: Understand the calculation of heat transfer through building structures
CO3: Calculate the cooling and heating load of the air conditioners
CO4: Design the dehumidifying coil, air washer and cooling tower
1. Refrigeration and Air Conditioning by C.P. Arora, TMH Publication
2. Refrigeration and Air Conditioning by R.C. Arora, PHI Publication
3. Refrigeration & Air Conditioning by W.F. Stoecker, TMH Publication
4. Air Conditioning System Design by Roger Legg, Butterworth-Heinemann 2017
5. Handbook of air conditioning and Refrigeration by Shan K. Wang, Tata McGraw Hill.

Course Name: Computer Aided Design
Course Code: ME-370
Course Type: Open Elective-I
Contact Hours/Week: 2L+2P Course Credits: 03
Course Objectives
 To impart the basic knowledge of use of computers in product development and design.
 To introduce the students to mathematical and computational modelling of curves, surface and solids.
 To enablethe student to use computer for product modelling andanalysis.
UNIT-01 Introduction:Introduction to CAD/CAM/CAE and Historical Developmentof CAD,Product 03L
Development Cycle,Typical CAD SystemArchitecture,Graphic Devices and Classification,
Input/output Devices, Operating Systems and Environments,Applications, Advantages and
Limitations of CAD,Concept of Coordinate Systems,. Line Generation Algorithm: DDA,
Bresenham’s Algorithms.Graphics Exchange Standards and Database Management Systems.
UNIT-02 Modelling of Curves and Surfaces:Curve Representation: Parametric vs Non-parametric, Implicit vs 06L
Explicit vs Intrinsic, Advantages of Parametric Representation, Analytic Curves, Synthetic Curves:
Concept and Types of Continuity, Cubic Spline: Equation, Bezier Curve, B-Splines and NURBS,
Various Types of Surfaces along with Their Typical Applications, Properties, Blending of
Curves/Surfaces.
UNIT-03 Modelling of Solids: Properties of Solid Model, Properties of Representation Schemes, Concept of
Half-Spaces, Boolean Operations, Schemes: Boundary Representation (B-Rep), Constructive Solid 03 L
Geometry (CSG), Sweep Representation, Analytical Solid Modelling (ASM), Primitive Instancing, Solid
Manipulations.
UNIT-04 Geometric Transformations: Homogeneous Representation, Translation, Reflection, Rotation,
Scaling, Shear in 2D and 3D, Combined Transformations, Modelling and Coordinate Transformations, 03 L
Graphic Projections: Orthographic, Axonometric,Oblique, and Perspective Projections.
UNIT-05 Finite Element Analysis: Review of Stress-Strain Relation and Generalized Hooke's Law, Plane
Stress and Plane Strain Conditions; Concept of Total Potential Energy; Basic Procedure for Solving a
Problem using Finite Element Analysis, 1-D Analysis: Concept of Shape function and natural 06 L
coordinates, 1-D structural problems with elimination and penalty approaches
UNIT-06 Design Optimization: Introduction, Gradient-based and Heuristic Methods, Johnson Method of
Optimization Normal Specification Problem, Redundant Specification Problem,. 03 L
Course Outcomes
CO1: To use computers in mechanical component design.
CO2: To use mathematical concepts of curve, surface and solid formulations in CAD.
CO3: To use design and analysis techniques and softwares in CAD.
1. CAD/CAM Theory and Practice by I. Zeid, McGraw Hill.
2. Mathematical Elements for Computer Graphics by David Rogers and J Alan Adams, TMH Publication.
3. Introduction to Finite Elements in Engineering by Chandrupatla T A and Belegundu A D, PHI.
4. Principles of Optimum Design: Modeling and Computation by Paplambros P. Y., Wilde D. J., Cambridge University Press, UK

Course Name: Product Design and Development
Course Code: ME-371
Course Type: Open Elective- I
Course Objectives
 To make student confident in their own abilities to produce a new product.
 To provide awareness about the role of various functions such as marketing, finance, industrial design, production etc. in product
development.
 To enable students to understand the basics of engineering and production in producing a new product.
 To enhance the ability to coordinate multiple, interdisciplinary tasks in order to achieve a common objective
UNIT-01 Introduction: Introduction and Significance of Product Design, Product Design and 06L
Development Process, Sequential Engineering Design Method, Challenges of Product
Development, Concept Development, Product Development and AMF Development Process,
AMF Organizations.
UNIT-02 Product Planning and Identifying Customer Needs: Product Planning Process, Interpret Raw 09L
Data in terms of Customers Need, Organize Needs in Hierarchy and Establish the Relative
Importance of Needs: Assessing Needs & Impact of Industrial Design, Industrial Design Process
and Management, Assessing Quality of Industrial design.
UNIT-03 Concept Generation: Activities of Concept Generation, Clarifying Problem, Concept Selection: 06L
Overview, Concept Screening and Concept Scoring, Methods of Selection, Concept Testing,
Product Architecture, Industrial Design.
UNIT-04 Embodiment Designand Detailed Design: Design for Prototyping& Manufacturing, Robust 09L
Design, Design for Manufacturing, Detailed Drawings and Specifications, Life Cycle
Assessment.
UNIT-05 Intellectual Property and Environmental Guidelines: Elements and Outline, Patenting 06L
Procedures, Claim Procedure, Design for Environment: Impact, Regulations from Government
,ISO System.
Course Outcomes
CO1: Distinguish different product development processes.
CO2: Distinguish associated engineering information with the product developmentprocesses.
CO3: Think about the sustainable design of a product and processes for competitive market.
CO4: Manage, construct and defend product data and its supporting technologies for its development to disposal.
1. Product Design and Development by Karl Ulrich and Steven D. Eppinger, Tata McGraw-Hill Education.
2. Product Design by K. Otto and K. Wood, Pearson Education.
3. Product Design: Creativity, Concepts and Usability by Prashant Kumar, PHI.
4. Making It: Manufacturing Techniques for Product Design by Chris Lefteri, McGraw-Hill Education.
5. Engineering Design, by George E. Dieter and Linda C. Schmidt, McGraw-Hill Education.

Course Name: Mechatronics and Robotics
Course Code: ME- 380
Course Type: Open Elective-II
Course Objectives
 To impart knowledge and use of mechatronic system and different types of sensors and actuators.
 To introduce the fundamentals of microprocessors, microcontrollers and PLCs and their architecture.
 To impart the knowledge of robotics, robotic programming and robot vision.
UNIT-01 Fundamentals of Mechatronics: Definition, Applications, Block Diagram of Mechatronic

System, Functions of Mechatronics Systems, Benefits of Mechatronics in Manufacturing. 03L
Analog Devices, Signal Conditioning, Digital Electronics, Data Acquisition systems
UNIT-02 Sensors and Actuators: Static characteristics of sensors and actuators, Position,
Displacement and Proximity Sensors, Force and torque sensors, Pressure sensors, Flow
sensors, Temperature sensors, Acceleration sensors, Level sensors, Light sensors, Smart
material sensors, Micro and Nano sensors, Selection criteria for sensors, Actuators: Electrical 09L
Actuators (Solenoids, Relays, Diodes, Thyristors, Triacs, BJT, FET, DC motor, Servo motor,
BLDC motor, AC motor, Stepper motors), Hydraulic and Pneumatic actuators, Design of
Hydraulic and Pneumatic circuits, Piezoelectric actuators, Shape memory alloys.
Unit-03 Microprocessors, Microcontrollers and Programmable Logic Controllers: Logic
Concepts and Design, System Interfaces, Communication and Computer Networks, Fault
Analysis in Mechatronic Systems, Synchronous and Asynchronous Sequential Systems, 09L
Microcontrollers, Programmable Logic Controllers (PLCs): Architecture, Basics of PLC
Programming, Logics, Timers and Counters, PLC Applications
UNIT-04 Introduction of Robotics: Definition of a robot, types of robotic joints and motions,
classifications of robot based on: Physical configurations, actuators and motion control; 03L
Terminologies used for robotics specification and selection for industrial applications; Types of
end effectors.
UNIT-05 Robot Kinematics and Dynamics: Homogeneous co-ordinates and co-ordinate
transformations, kinematic parameters, use of Denavit-Hartenberg representation for finding 06L
arm equation of robotic arms, forward and inverse kinematics for basic industrial robotic
configurations, SCARA configurations, Basics of Robot Dynamics.
UNIT-06 Robot Vision and Programming: Sensing and digitization of vision data, image processing:
image data reduction, segmentation, feature extraction, object recognition, and training of 06
vision system, Robot programing methods, Robot Programming Languages.
Course Outcomes
CO1: Generate conceptual design for mechatronics products based on potential customer requirements
CO2: Select appropriate sensors and actuators and devise a system for collecting information about processes
CO3: Demonstrate the concepts of kinetics & dynamics of robot, and Identify an application of robots in manufacturing.
1. Mechatronics: Electronic control systems in Mechanical and Electrical Engineering by W. Bolton, Pearson Edu.
2. Introduction to Mechatronics & Measurement Systems by David G Alciatore and Michael B Histand, McGraw-Hill.
3. Industrial Robotics: Technology, Programming and Applications by M.P. Grover and N. G. Odrey, TMH Edu. India
4. Robotics: Control and Programming by J. Srinivas, Rao V. Dukkipati and K. Ramji, Alpha Science International.

Course Name: Total Quality Management
Course Code: ME-381
Course Type: Open Elective-II
Course Objectives
 To understand the concept of Quality in Manufacturing and Service units
 To understand the Implication of Quality in Business
 To understand how to implement Quality Programs in an Organization
 To have exposure to challenges in Quality Improvement Programs
UNIT-01 Introduction: Evolution of Quality, Historical Perspectives, Relationship among Quality, Vision, Mission
and Objectives of an Organization, Role of Quality in a Corporate Structure of an Organization, Attributes of
Product and Service Quality, Quality Characteristics: Quality of Design, Quality of Performance and Quality 06L
of Conformance, Zero Defect and Continuous Improvement.
UNIT-02 Conceptualization of TQM: Introduction to Total Quality Management (TQM), Barriers to TQM, Benefits of
TQM implementation, Basic Approaches of TQM, TQM Models, Quality Information System and Planning,
Importance of TQM in manufacturing and Service Industry. 06L
UNIT-03 Organization Structure in TQM: Role of Top Management, Quality Council, Quality Circles, Organization
Structure for Quality Circles, Quality Policies, Role of Middle and Lower Management, Problem Solving
Techniques. 03L
UNIT-04 Tools and Systems for Quality Management: Basic Tools: Cause & Effect Diagram, Flow Diagrams, Trend
Charts, Histogram, Scatter Diagram, Control Chart, Advanced Tools: Affinity Diagram, Inter Relationship
Diagram, Tree Diagram, Matrix Diagram, Process Decision Program Chart (PDPC) and Matrix Data
Analysis, Fault Tree Analysis, Quality Function Deployment (QFD):Definition and Phases in QFD , Taguchi
Approach To Quality System Design, Six-sigma :Definition & Implementation Steps, Just In Time 09L
Production System, Quality Production through JIT and Kanban, Failure Mode and Effect Analysis (FMEA):
Scope, Mode, Illustrative Example and Applications.
UNIT-05 Quality Assurance : Causes of Quality Failure, Quality Assurance: Need and Various Elements in Quality
Assurance Programme, Quality Control- on Line and off Line, Statistical Concepts in Quality, Chance and
Assignable Causes, Bench Making in Quality Management. 06L
UNIT-06 Implementation and Need of ISO 9000: ISO 9000 – 2000 Quality System: Elements, Registration,
Documentation, Implemental Steps, Quality Audit, Product and Process Audit: Scope, Steps and Benefits. 06L
Course Outcomes
CO1: Identify the significance of quality in an organization
CO2: Describe how to manage quality improvement teams
CO3: Apply the tools of quality improvement programs in an organization
CO4: Assess the benefits of implementing TQM Program in an organization
1. Total Quality Management by Dale H Bersterfilled, PHI Publication.
2. Total Quality Management by N.V.R Naidu, G. Rajendra, New Age international Publication.
3. Total Quality Management by L. Sugandhi and Samuel Anand, PHI Publication.
4. Total Quality Management by R.S Naagarazan, New Age International Publication.

Syllabus FinalYr PDF

Uploaded by

Copyright:

Available Formats

Syllabus FinalYr PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Syllabus FinalYr PDF

Uploaded by

Copyright:

Available Formats

Course Curriculum

(Course Structure and Syllabi)

Department of Mechanical Engineering

National Institute of Technology Hamirpur

Fluid Mechanics and

Fluid Mechanics and

Metrology and Heat and Mass Transfer

Department of Mechanical Engineering, NIT Hamirpur Page 2 of 63

3 DET Professional Elective-I 3 0 0 3 3 DET Professional Elective-III 3 0 0 3

Professional Elective- Professional Elective-

Semester Wise Credits

Department of Mechanical Engineering, NIT Hamirpur Page 3 of 63

ME-430 Finite Elements in Engineering

ME-460 Alternative Fuels Technology

Open Elective Courses

ME-370 Computer Aided Design

ME-380 Mechatronics and Robotics

Department of Mechanical Engineering, NIT Hamirpur Page 4 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 5 of 63

Velocity And Acceleration In Mechanism

Department of Mechanical Engineering, NIT Hamirpur Page 6 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 7 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 8 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 9 of 63

CO1: Able to explain the effect of fluid properties on a flow system.

Department of Mechanical Engineering, NIT Hamirpur Page 10 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 11 of 63

1. Preparation of drawing sheet related to Limits, Fits and Tolerances.

CO1: Understand the concept of machine elements and their drawings.

Department of Mechanical Engineering, NIT Hamirpur Page 12 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 13 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 14 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 15 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 16 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 17 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 18 of 63

CO1: Understand the basic laws of heat transfer

Department of Mechanical Engineering, NIT Hamirpur Page 19 of 63

1. To study various types of Links, Pairs, Chains and Mechanisms.

11. Virtual Laboratory: Mechanism

12.Virtual Laboratory: Vibrations

Department of Mechanical Engineering, NIT Hamirpur Page 20 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 21 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 22 of 63

UNIT-03 Steam Nozzles

Department of Mechanical Engineering, NIT Hamirpur Page 23 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 24 of 63

CO1: Decide the different characteristics of green sand.

Department of Mechanical Engineering, NIT Hamirpur Page 25 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 26 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 27 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 28 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 29 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 30 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 31 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 32 of 63

Department of Mechanical Engineering, NIT Hamirpur Page 33 of 63

UNIT-02 Linear Programming Problems 09L

Department of Mechanical Engineering, NIT Hamirpur Page 34 of 63

UNIT-03 Expert system: 