Load Tree Calculations

Project Name: N Burlington Line Tap @ Agency Sub

Strucute Type: 69-AL-1-S-795
Structure No.: 1
Project No.: 3163447
Wind Span: 140 NESC H. Init. Tensions ************ Definitions ***********
Wt. Span: 140 3/8" 685 Tw = TRANSVERSE LOAD DUE TO
Max. Angle: 6 FIBER 0 THE WIND
Radian Angle 0.1047 Trans. 727
1st UB 0 Tt = TRANSVERSE LOAD DUE TO
2nd UB 0 THE WIRE TENSION
Wind Psi 21.00

Wire Tensions from Sag10 (lbs)

Case I: Case II Case III Case IV
Initial Final Final Final
Conductor Dia. Wt. NESC Heavy Heavy Ice Heavy Wind Pre-Camber
Information (inches) (lb\ft) 1\2" ice 1" ice No ice No ice Insulator
(See Note) 4# wind No Wind 21 lb No Wind weight
0 deg Initial 0 deg Final 60 deg Final 60 deg Final (lbs.)
DESCRIPTION NAME
SHIELD WIRE 3/8" EHS 0.360 0.273 685 1151 480 151 50
TRANSMISSION Drake 1.108 1.094 727 1145 785 307 50
1ST UB 0 0 0 0 0 0 0
2nd UB 0 0 0 0 0 0 0
FIBER OPTICS 0 0 0 0 0 0 0
Safety Factors
Note: Enter 0 (zero) to void "LOAD L 1.65 1.1 1.1 1
TREE RESULTS" table info Tw 2.5 -- 1.1 --
automatically. Tt 1.65 1.1 1.1 1
V 1.5 1.1 1.1 1

LOAD TREE RESULTS (lbs)

Case I Case II Case III Case IV Profile View

SHIELD WIRE
Tw 159 0 97 0 Longitudinal
Tt 118 133 55 16
T1 - Total Transverse Load: 277 133 152 16 Transverse
V1 - Total Vertical Load: 170 303 42 38
L1 - Longitudinal: 1,130 1,266 528 151
TRANSMISSION
Tw 246 0 299 0
Tt 126 132 90 32
T2 - Total Transverse Load: 371 132 389 32
V2 - Total Vertical Load: 515 627 223 203 Vertical
L2 - Longitudinal: 1,200 1,260 864 307 Longitudinal
1ST UB
Tw 0 0 0 0
Tt 0 0 0 0
T3 - Total Transverse Load: 0 0 0 0
V3 - Total Vertical Load: 0 0 0 0 Longitudinal
L3 - Longitudinal: 0 0 0 0
2nd UB
Tw 0 0 0 0
Tt 0 0 0 0 Transverse
T4 - Total Transverse Load: 0 0 0 0
V4 - Total Vertical Load: 0 0 0 0
L4 - Longitudinal: 0 0 0 0 Longitudinal
FIBER OPTICS
Tw 0 0 0 0 Plan View
Tt 0 0 0 0
T5 - Total Transverse Load: 0 0 0 0
V5 - Total Vertical Load: 0 0 0 0
L5 - Longitudinal: 0 0 0 0

10/09/2020 H:\KEN\PRJECTS\Nevada Projects\Nevada-Colo\494235864.xls\Calcs Str 1

 MECHANICAL LOADING CRITERIA

Wind
Load Radial Ice Pressure Temp Initial or Overload Factors
Case Description (inches) (psf) (deg F) Final TW V TT
1 NESC Heavy 1/2" 4 0 I 2.5 1.5 1.65
2 Heavy Ice 1" 0 0 F -- 1.1 1.1
3 Heavy Wind 0" 21 60 F 1.1 1.1 1.1
4 Precamber 0" 0 60 F -- 1.0 1.0

LOADING TABLE FOR STR. NO(s): 1

LOAD CASE 1 CASE 2 CASE 3 CASE 4

W 10 21
T1 277 133 152 16
V1 3/8" EHS Static
170 303 42 38
L1 1,130 1,266 528 151

T2 371 132 389 32

V2 515 627 223 203
69kV Phase
L2
"Drake"
1,200 1,260 864 307

T3 0 0 0 0
V3 0 0 0 0
L3 0 0 0 0

T4 0 0 0 0
V4 0 0 0 0
L4 0 0 0 0

T5 0 0 0 0
V5 0 0 0 0
L5 0 0 0 0

T6
V6
L6

STRUCTURE TYPE: 69-AL-1-S-795

NOTES
1) All loads shown in the loading table are ultimate loads and include overload
factors. Load abbreviations are as follows: T = Transverse, V = Vertical,
L = Longitudinal, W = Wind pressure. Wire loads are in pounds and wind
pressure in pounds per square foot (lbs/ft2). TW = transverse load due to wind.
TT = transverse load due to conductor tension.

2) For structure design, all vertical and transverse loads shall be considered to
act simultaneously with wind and the dead load of the structure.
Steel pole fabricator is to calculate the additional load on the pole
due to the wind on the pole.

Project Name: N Burlington Line Tap @ Agency Sub

0 2/4/2005
Cedar Rapids, IA Rev Date Prepared Date Verified

10/09/2020 H:\KEN\PROJECTS\Nevada Projects\Nevada-Colo\494235864.xls\Table STR 1

 SEE DWG 10.7.1
All loads are UN-RESOLVED
Pole Cap & Static Vang

T1 T1 L1 L1

SEE DWG 10.8 L1 L1 3 deg See Dwg 10.7.1

Grounding Nut V1 V1
7 ft
2 Static
Wire Vang's
1
B B
See Dwg 10.6.1
Centerline between pipes See Dwg 10.17.1
T2
3 deg
L2
V2 L1 L1 Static Wire View

C C Use 1" thru pipe

with 12" vertical
11.5 ft 8 ft 8 ft spacing.

T2 T2
Centerline of Arms L2
L2 L2
V2 V2 3 deg

See Dwg 10.8 See Dwg 10.17.1

See Dwg 10.7.9

3 deg
L2
SECTION "B-B"

58.5 ft

L2 L2
3 deg
77 ft

3 deg
L2
SEE DWG 10.16 L2

SEE DWG 10.8 SECTION "C-C"

5 ft
1 ft

Ground Line

2 ft

SEE DWG 10.5.1

15 ft

Butt Dia. must not exceed 30"

69-AL-1-S-795
Project Name: N Burlington Line Tap @ Agency Sub
Project Number: 3163447
0 2/4/2005 Structure No(s): 1 Page 1 of 2
Rev Date Prepared Date Verified

H:\KEN\PROJECTS\ahgrinn\494235864.xls\STR 1 Pg 1