Mark 57 Series

Pressure Regulators
CRN Registration Number Available

Externally Piloted Back Pressure Regulators

The Mark 57 provides accuracy that approaches that

of controller-operated valves and should be consid-
ered on most critical applications before other costly,
more sophisticated instrumentation.
The Mark 57 is part of the sliding gate regulator offer-
ing. As with all sliding gate products, a much shorter
stroke than the standard globe or plug style valve is
achieved. The shorter stroke combined with the action
of the pilot valve creates a faster and more accurate
response (less build-up). This allows a shorter travel
for the seats to reach optimal positioning, with less
diaphragm movement.

Mark 57 Externally Piloted Back Pressure Regulator

Operation
The Mark 57 main valve and pilot are normally closed.
The inlet pressure passes through the inlet pilot tub-
ing beneath the pilot diaphragm. When the setpoint is Features
reached, the force of the adjusting spring is overcome • High turn-down ratios – up to 50:1
and the pilot valve opens. This allows the inlet pres- • Sliding gate seats – Jordan Valve's pilot-
sure to enter the chamber above the main diaphragm operated regulators feature advanced
and opens the main valve. When the pressure drops sliding gate seat technology:
below the setpoint, the adjusting spring overcomes the
force of the pressure beneath the pilot diaphragm, and –  Straight-through flow for reduced turbu-
the pilot and main valve close. lence
–  Short stroke for fast response and ac-
Due to the piloted sliding gate design, one can expect curate regulation
enhanced control performance in the areas of droop –  Easily interchangeable Cv's and trim
and rangeability. Build-up for this valve will be in the sets
3 - 5% range. Rangeability can be as high as 50:1. –  Tight shutoff
• Versatile application – for use on steam,
water, air, gas and chemicals

Jordan Valve a division of Richards Industries

3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
info@richardsind.com • www.jordanvalve.com
 Mark 57 Externally Piloted Back Pressure Regulators

Specifications
Line Sizes: 1/2" (DN15) through 6" (DN150) Pressure Control Ranges, PSI (BAR)
End Connections 20 - 45 30 - 135 80 - 185
• Threaded – FNPT, BSPT, BSPP – 1/2" - 2" (1,4 - 3,1) (2,1 - 9,3) (5,52 - 12,8)
(DN15 - 50) Note: a minimum pressure differential of 25 psi from valve inlet
• Companion Flanges – 1/2" - 2" (DN15 - 50) to outlet is required for proper operation. Consult factory for
set points below 25 psi.
• Integral Flanges – 2-1/2" - 6" (DN65 - 150)
Body Materials
Cv (Kv) Values & Maximum Differential Pressures:
• Ductile Iron
• Cast Iron Flow Coeff. Max ∆P
Valve Size Seat Mate-
• Carbon Steel – A216 WCB Cv Kv
(DN) rial
PSI BAR
• Stainless Steel – A351 CF8M 1/2" SST 125 8,6
5 4,3
Body Materials DN15) Jorcote 300 20,7
3/4" SST 12 8,6
• Ductile Iron 9.5 8,2
(DN20) Jorcote 300 20,7
• Cast Iron 1" SST 75 5,2
15 12,9
• Carbon Steel – A216 WCB (DN25) Jorcote 275 19,0
1-1/4" SST 75 5,2
• Stainless Steel – A351 CF8M 25 21,5
(DN32) Jorcote 275 19,0
Trim Materials 1-1/2" SST 75 5,2
30 25,8
• 303SS – Standard on DI, CI or CS valves (DN40) Jorcote 275 19,0
• 316SS – Standard on SS Valves 2" SST 75 5,2
50 43
(DN50) Jorcote 275 19,0
Seat Materials 2-1/2"
• Jorcote on SST – Standard 55 47,3 Jorocte 400 27,6
(DN65)
• Other materials available – Consult factory 115 98,0
3"
Jorcote 400 27,6
Diaphragm Material: Stainless Steel – standard (DN80)
4"
Service: Steam, water, oil, gas, air and chemicals 200 172 Jorcote 325 22,4
(DN100)
Shutoff: ANSI Class IV 395 340
6"
Jorcote 325 22,4
(DN150)

Maximum Working Pressure & Temperature

Maximum Pressure @ 100°F, PSI/°F (Maximum Pressure @ 37,8°C, BAR, °C)
DI Body CI Body CS Body SST Body
Size Bolt Diaph.
150# 300# TE 125# 250# TE 150# 300# TE 150# 300# TE

1/4"-2" Std. S6 250 (17) 300 (21) 300 (21) 200 (14) 300 (21) 300 (21) 285 (20) 300 (21) 300 (21) 275 (19) 300 (21) 300 (21)
(DN8-50) Dbl. S6 250 (17) 600 (41) 600 (41) 200 (14) 500 (23) 500 (34) 285 (20) 740 (51) 950 (66) 275 (19) 720 (50) 950 (66)

2-1/2"-6" Std. S6 250 (17) 300 (21) — 200 (14) 300 (21) — 285 (20) 300 (21) — 275 (19) 300 (21) —
(DN65-150) Dbl. S6 250 (17) 500 (34) — 200 (14) 500 (34) — 285 (20) 500 (34) — 275 (19) 500 (34) —
Pressure @ Maximum Temperature, PSI/°F (BAR/°C)
125/650 300/650 300/600 125/450 250/450 250/450 125/650 300/650 301/650 125/650 300/650 300/650
Std. S6
1/4"-2" (9/343) (21/343) (21/343) (9/232) (17/232) (17/232) (9/343) (21/343) (21/343) (9/343) (21/343) (21/343)
(DN8-50) 125/650 450/650 450/650 125/450 250/450 250/450 125/650 535/650 950/650 125/650 445/650 890/650
Dbl. S6
(9/343) (31/343) (31/343) (9/232) (17/232) (17/232) (9/343) (37/343) (66/343) (9/343) (31/343) (61/343)
200/400 300/400 125/450 250/450 125/650 300/650 125/650 300/650
Std. S6 — — — —
2-1/2"-6" (14/204) (21/204) (9/232) (17/232) (9/343) (21/343) (9/343) (21/343)
(DN65-150) 200/400 525/400 125/450 250/450 125/650 535/650 125/650 445/650
Dbl. S6 — — — —
(14/204) (36/204) (9/232) (17/232) (9/343) (37/343) (9/343) (31/343)

-2-
 Mark 57 Externally Piloted Back Pressure Regulators

Dimensions
D
D

B B

C
C

A E
A1 A E
MK57 (1/2" – 2") MK57 (2-1/2" – 6")

Threaded & FSW Ends Threaded & FSW Ends, Metric

Dimensions (inches) Dimensions (mm)
Valve A B C D E Weight Valve A B C D E Weight
Size Lbs Size Kgs
DI CS/SS ALL ALL ALL ALL DI CS/SS ALL ALL ALL ALL
1/2" 5.31 5.50 5.06 3.50 7.12 11.38 31 DN15 135 140 129 89 181 289 14,1
3/4" 5.31 5.50 5.06 3.50 7.12 11.38 37 DN20 135 140 129 89 181 289 16,8
1" 5.69 6.50 5.25 3.62 7.12 11.50 42 DN25 145 165 133 92 181 292 19,1
1-1/4" 5.88 6.50 5.43 3.75 7.12 11.62 42 DN32 149 165 138 95 181 295 19,1
1-1/2" 8.18 8.18 7.00 5.00 10.62 11.88 74 DN40 208 208 178 127 270 302 33,6
2" 8.18 8.18 7.00 5.00 10.62 11.88 76 DN50 208 208 178 127 270 302 34,5

Flanged Ends 150# & 300# Flanged Ends PN 10/16/25/40, Metric

Valve Dimensions (inches) Weight Valve Dimensions (mm) Weight
Size A B C D E Lbs Size A B C D E Kgs
1/2" 11.50 5.06 3.50 7.12 11.38 35 DN15 292 129 89 181 289 15,9
3/4" 11.50 5.06 3.50 7.12 11.38 43 DN20 292 129 89 181 289 19,5
1" 11.50 5.25 3.62 7.12 11.50 48 DN25 292 133 92 181 292 21,8
1-1/4" 11.50 5.43 3.75 7.12 11.62 50 DN32 292 138 95 181 295 22,7
1-1/2" 14.50 7.00 5.00 10.62 11.88 86 DN40 368 178 127 270 302 39,0
2" 14.50 7.00 5.00 10.62 11.88 90 DN50 368 178 127 270 302 40,8

Valve Dimensions (inches) Weight Valve Dimensions (mm) Weight

Size Flange Lbs Size Flange Kgs
A B C D E A B C D E
Rating PN
125-150 10.87 10/16 283
2-1/2" 10.68 6.93 12.75 14.00 173 DN65 271 176 324 356 78,5
250-300 11.50 25/40 283
125-150 11.75 10/16 312
3" 10.68 6.93 12.75 14.00 193 DN80 271 176 324 356 87,5
250-300 12.50 25/40 312
125-150 13.87 10/16 350
4" 11.88 8.00 12.75 15.00 223 DN100 302 203 324 381 101,2
250-300 14.50 25/40 350
125-150 17.75 10/16 471
6" 12.57 9.00 12.75 15.00 313 DN150 319 229 324 381 142,0
250-300 18.62 25/40 471

-3-
 MK57/0916
Mark 57 Externally Piloted Back Pressure Regulators

Ordering Schematic

Model No Size Body Mat'l 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Model 3&4 Trim

57 Standard S3 303SS
S6 316SS
Size ZZ Non-Standard
050 1/2" (DN15)
075 3/4" (DN20)
5 Seats
100 1" (DN25)
A 303SST
125 1-1/4" (DN32)
B 316SST
150 1-1/2" (DN40)
V 303SS/Jorcote
200 2" (DN50)
W 316SS/Jorcote
250 2-1/2" (DN65)
X 303SS/Jorcote/Jordanic
300 3" (DN80)
Y 316SS/Jorcote/Jordanic
400 4" (DN100)
600 6" (DN150)
6 Cv's (Kv's)
Body Material Cv Kv Cv Kv
DI Ductile Iron K 5.0 4,3 C 50 43,1
CS Carbon Steel (WCB) 8 9.5 8,2 D 55 47,4
S6 Stainless Steel (CF8M) 9 15 12,9 G 115 99,1
CI Cast Iron A 25 21,6 I 200 172,4
B 30 25,9 J 395 340,5
4 End Connections V 35 30,2 Z Non-Standard
1/2" - 2" Size Range
PT NPT
7&8 Range
BP BSPT
53 20 - 45 (0,1 - 3,1)
BP BSPP 76 30 - 135 (2,1 - 9,3)
SW FSW A4 80 - 185 (5,5 - 12,8)
F5 150#FE ZZ Non-Standard
F3 300#FE
F1 125#FE
F2 250#FE 9 & 10 Diaphragm
2-1/2" - 6" Size Range S6 316SST
I5 150#IFE CS, S6, or DI
I3 300#IFE CS, S6, or DI 11 & 12 Actuator
I1 125#IFE CI MD For Metal Diaphragm
I2 250#IFE CI
I7 IFE PN10, all materials
I6 IFE PN16, all materials
I8 IFE PN25, all materials
I4 IFE PN40, all materials

Jordan Valve a division of Richards Industries

3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
info@richardsind.com • www.jordanvalve.com