Pacs-C Series: High Efficiency Air Cooled Packaged Air Conditioners
Pacs-C Series: High Efficiency Air Cooled Packaged Air Conditioners
Pacs-C Series: High Efficiency Air Cooled Packaged Air Conditioners
R-410A
PACS-C SERIES
REFRIGERANT
Since
1974
60Hz
R-407C
REFRIGERANT
RANGE 5 TR to 90 TR
(17 kW to 307 kW)
Contents Introduction
Introduction.....................................................2 Electrical Data..............................................10 SKM PACSC Series Packaged Air Conditioners are
Legend...........................................................2 Field Connections..................... ....................11 designed and manufactured to meet the requirements
Nomenclature.................................................2 Field Wiring Requirement Scheme.............. 11 of the Gulf’s severe climatic conditions and are built
Component Features......................................3 Typical Wiring Diagram.................................12 specifically for outdoor installations, either on ground
Optional Features.......................................... 4 Dimensional Data.........................................17 or roof level.
Selection Procedure.......................................6 Loading Points..............................................22
General Data..................................................7 Sound Data ..................................................23
Capacity Ratings 60Hz...................................8 Space Requirement & Installation...............24
The PACSC Series Packaged Air Conditioners are ideal for
Fan Performance Data...................................9 Guide Specifications.....................................27
warehouses, large halls, schools, mosques, or wherever
the requirement is for a heavy duty unit with a hermetic
compressor.
2
R-407C
R-410A
REFRIGERANT
• 100% fresh air units or units with high incidence of fresh outdoor air.
• Units with unusual filtration requirements incorporating carbon, bag and/
or other filters.
• Special units for ducted condenser air using centrifugal type condenser
air fans.
• Units constructed of aluminium or stainless steel.
• For those special off-shore or refinery or sewage treatment applications
requiring specially coated heat transfer coils.
Condenser Coil
All of these flexibilities cannot be cataloged nor all the possible options listed. For different application requirements, other optional condenser fin materials
They are available and SKM has over 44 years of experience in designing and are available:
building such units to meet the most stringent requirements of most applications.
For your special requirements please consult SKM. • Copper fins.
• Electrotinned Copper Fins.
• Copper finned coils with electro-tinned after manufacturing.
• Precoated Aluminum fins
Component Features The pre-coated is hydrophobic polyurethane resin. This option provides
substantial corrosion protection beyond standard coil construction.
The common standard features of all PACSC series Packaged Units include • Aeris Guard Coil Coating
the following. The Aeris Guard Coil is a self etching high performance modified epoxy
finish that is specifically designed to coat and protect Aluminum and
Copper surfaces. In addition, the coating is ideal for the protection of
ferrous and non ferrous materials.
Compressor
All models are suitable for Gulf countries, ensuring the condenser
Compressors used in PACSC packaged unit series are hermetically sealed, coil design shall provide long life operation with the least possibility
compact scroll with the following features: operational blockage on the condenser. Ample condenser surface
and sensible air flow across the condenser ensures a low temperature
• High Efficiency. differential between condensing temperature and the high Gulf
• Quiet operation, Low Sound levels. ambient making the PACSC packaged unit perform efficiently and
• Compact and light . durably.
• Limited wear.
• 70% fewer moving parts than comparably sized reciprocating
compressors
Low Noise Condenser Fans
• Unique ability to handle liquid refrigerant. The condenser fans are propeller type, aluminium alloy blades, directly driven
• Suction gas motor cooling. by electric motors. Motors are Totally Enclosed Air Over (TEAO) six pole with
• Centrifugal oil pumps. class ‘F’ insulation and IP55/IP54 protection. The TEAO and class ‘F’ insulation
• Brazed fittings or Rotalock as options. features ensure long life and are unique to SKM.
• Two refrigerant circuits on larger units provide efficient part load. The motors are factory wired to chiller unit control panel where the motor starters
are located to control the operation of these motors. The fans are individually
statically and dynamically balanced at the factory. Complete fan assembly is
Parallel Operation provided with suitable acrylic coated fan guard.
adhesive.
Evaporator For applications requiring an inner skin in the evaporator section, option
Evaporator coils are manufactured of seamless copper tubes mechanically DSE provides an 0.7mm galvanized inner skin. Suitable isolation to ensure
bonded to aluminium fins to ensure optimum heat transfer. All evaporator no cold-bridges and no condensation on the exterior of the units is provided.
coils are tested against leakage by air pressure of 300psig(2068kPa) under The condensate drain pan is heavily insulated to ensure condensation does
water. The DX evaporator coils are complete with headers of seamless copper not occur. Stainless steel condensate drain pans are available on request.
tubing. Supply headers incorporate a correctly sized distributor. For different
application requirements, other evaporator coil material and/or treatment are
available on request.
• Copper fins. Electrical Control Panel
• Electrotinned Copper fins.
• Copper finned coils with electro-tinned after manufacturing. The unit mounted control panel enclosure is fabricated out of heavy gauge sheet
• Precoated Aluminum fins. steel in phosphatized powder coated baked finish. The enclosure conforms to
The pre-coated is hydrophobic polyurethane resin. This option provides IP54 as per guidelines in IEC 529. The panel is factory wired in accordance
substantial corrosion protection beyond standard coil construction. with NEC 430 & 440, labelled, tagged and features 220V / 240V controls.
• Aeris Guard Coil Coating.
The Aeris Guard Coil is a self etching high performance modified epoxy • All compressors are with DOL starting.
finish that is specifically designed to coat and protect Aluminum and • Compressor, condenser fan motors and evaporator fan motor contactors.
Copper surfaces. In addition, the coating is ideal for the protection of • Control circuit breaker or control fuse.
ferrous and non ferrous materials. • Control circuit on/off switch.
• Electronic Control board for operation and safety control of unit models
Evaporator coils are rated in accordance with AHRI-410. Evaporator coil with up to 2-compressors.
supplied with suitable size thermostatic expansion valve(s) and multi-circuited
• Control relays and timers for the operation and safety control of unit models
distributors providing capacity modulation to match the compressors. The cross
wave fins and staggered tubes design use the evaporator surface effectively with 4-compressors.
by creating uniform air turbulence and optimum heat transfer over the entire • Power and control terminal blocks.
finned surface. Requirements for higher face velocities can be handled by use
of moisture eliminators to avoid carryover.
PACSC series have single and dual fans mounted on a single heavy duty shaft.
The fan(s) are driven by a single speed electric motor, Class F insulated, IP55
protected & are totally enclosed 4 pole motor rated for continuous operation
at design conditions.
The motor is fitted with an adjustable V-belt drive, as standard. Shaft ends insert
into oversized, tapered lock self-aligning, long-life bearings Motor is factory
wired to the control panel where the motor contactor is located. Belt driven
motors upto 11.0kw are provided with adjustable pitch pulleys are stanadrd.
Above 11.0kw motors sizes are equipped with fixed pitch pullleys as standard.
Filter Section
PACSC series are supplying with 1” thick Aluminium type filters with grade G2
as standard for all models.
Casing/Structure
The unit casing used in PACSC Packaged units is made of zinc coated galvanized
steel sheets conforming to JIS-G 3302 and ASTM A653 which is phosphatized
before application of an electrostatic powder coat of approximately 60 microns
and then oven-baked for tough and lasting weather resistant finish. This finish
and coating can pass a 1000 hour in 5 % salt spray testing at 95°F (35°C)
and 95% relative humidity as per ASTM B117. The entire casing panels are
designed to be leak proof against rain and ensure rain water cannot enter the
packaged air conditioner interior.
The evaporator section is sealed with vinyl gaskets. The standard evaporator
section is insulated from all sides with black-neoprene faced heavy density 1”
thick fibreglass insulation up to model 62050 and 2” thick fibreglass insulation
for above models.
The insulation-cum-sound liner meets the fire requirements of NFPA90A &
90B and is secured with mechanical fasteners in addition to water resistant
4
R-407C
R-410A
REFRIGERANT
Optional Features
• Phase burn-out.
IP 55 Control panel (ICP)
NEMA 4 IP 55 Control panel.
• Phase reversal.
• Under / over voltage on the incoming line voltage. Voltmeter and selector switch (VSS)
For incoming line voltage
BMS interface volt free contacts. (BMVF) Liquid Tight Flexible Conduit (LTFC)
Volt free contacts for run status, common fault status, auto mode status and Metallic conduit type for marine/offshore application that require protection
provision for remote on/off shall be provided as an option if required. For for water ingress and mechanical protection against moving object.
additional requirements, please contact SKM.
Extended lubrication fittings (LFE)
Control Transformer. (CXT) Extended lubrication fitting with copper tubing for evaporator fan.
This option is necessary and available for unit models rated for 460V/3PH/60Hz
or power supplies without neutral. When ordering for these voltages, this option Antivibration mounts for Fan Assembly (FAVM)
must be ordered. Spring Anti vibration mounts for fan sub frame.
6
R-407C
R-410A
REFRIGERANT
Note:
- *DTS & BMSP options are only available along with AMCS option.
- ** If CBM combined with USM option please consult SKM, as component
might changed.
- Whenever multiple options related to unit control, please consult SKM for the
drawings, as the size of the control panel might change.
Selection Procedure
PACSC series packaged air-conditioners should be selected with care and using sound engineering judgement. Selections based on matching total capacity alone
or air flow rate alone may not be correct. To meet requirements of a specific application, sample procedure for selection is given in examples below.
Selection Procedure :
Enter packaged unit capacity ratings at given condition and select unit size PACSC - 62025 having total cooling capacity 254.7MBh (74.6kW), and sensible
cooling 193.8MBh (56.8kW), PI=23.5kW. Total sensible cooling capacities & power to be interpolated for untabulated data.
- For EDB other than 80ºF (26.7ºC), use following formula:
Actual sensible capacity = Rated sensible capacity + 0.0011 (1 - BPF)(EDB - 80) x cfm - IP Units
Actual sensible capacity = Rated sensible capacity + 0.00123 (1 - BPF)(EDB - 26.7) x l/s - SI Units
Refer to fan performance table on page 9 and adjust fan RPM = 831, fan brake power 2.38 kW. Standard motor size for selected model is 4.0 kW.
SKM Computer Selections are available for quick, detailed and accurate selections.
Table 2
8
R-407C
R-410A
REFRIGERANT
Notes: Table 4
(1). Ratings are based on 80ºF (26.7ºC) entering air dry bulb temperature. (2). Capacity is gross capacity which does not include the effect of evaporator fan motor heat.
(3). Direct interpolation is permissible. Do not extrapolate.
* Power input mentioned in this page is for compressor only, and should not be used for cable or fuse selection.
MCA and MFA values given in the electrical data pages (10) should be referred for the same.
Internal Static
Model AirFlowRate
Pressure 0.2(50) 0.4(100) 0.6(150) 0.8(200) 1(250) 1.2(300) 1.4(350) 1.6(400) 1.8(450) 2(500)
PACSC
cfm l/s in.wg Pa RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW
1850 873 0.3 75 686 0.25 782 0.31 871 0.37 954 0.42 1035 0.49 1115 0.55 1193 0.62 1270 0.7 1347 0.78 - -
61005 2000 944 0.35 86 724 0.31 814 0.37 899 0.43 978 0.49 1054 0.56 1129 0.62 1203 0.69 1275 0.77 1347 0.85 1418 0.94
2895 1366 0.74 185 979 0.85 1046 0.93 1110 1.02 1172 1.11 1231 1.2 1289 1.29 1344 1.37 1399 1.46 1452 1.55 1505 1.65
2500 1180 0.29 72 605 0.34 691 0.42 769 0.49 842 0.57 912 0.66 978 0.74 1042 0.83 1105 0.93 1167 1.03 1227 1.14
61010 3400 1604 0.5 125 755 0.75 823 0.85 887 0.96 948 1.06 1007 1.17 1063 1.28 1116 1.38 1169 1.49 1220 1.6 1269 1.72
4000 1888 0.7 175 869 1.17 928 1.3 984 1.42 1038 1.55 1091 1.67 1142 1.8 1191 1.92 1238 2.05 1285 2.17 1330 2.3
3800 1793 0.24 59 - - 676 0.55 770 0.68 859 0.83 944 1 1027 1.18 1109 1.4 1190 1.64 1271 1.91 - -
62015 5000 2360 0.37 91 672 0.79 759 0.96 839 1.13 913 1.3 985 1.48 1054 1.67 1121 1.87 1186 2.08 1250 2.3 1314 2.54
5500 2595 0.44 110 721 1.02 802 1.2 877 1.39 948 1.57 1015 1.76 1080 1.96 1143 2.16 1204 2.38 1264 2.6 1323 2.84
4200 1982 0.17 43 - - 652 0.59 745 0.73 830 0.88 912 1.04 990 1.22 1066 1.41 1141 1.62 1216 1.85 1289 2.11
62020 7000 3303 0.34 84 744 1.52 814 1.74 883 1.97 949 2.21 1012 2.45 1072 2.68 1130 2.91 1186 3.15 1239 3.39 1292 3.63
7500 3539 0.39 96 787 1.83 853 2.07 918 2.32 981 2.57 1041 2.82 1099 3.07 1155 3.32 1209 3.58 1261 3.83 1311 4.08
7000 3303 0.28 70 525 0.94 601 1.16 671 1.38 735 1.62 796 1.88 854 2.14 911 2.43 966 2.73 1020 3.05 1073 3.39
62025 8000 3775 0.36 89 573 1.31 643 1.56 707 1.81 767 2.07 824 2.34 878 2.63 931 2.92 981 3.23 1031 3.55 1079 3.89
9000 4247 0.45 112 627 1.8 691 2.07 751 2.35 807 2.63 860 2.93 911 3.23 960 3.55 1007 3.87 1053 4.21 1098 4.55
8000 3775 0.24 59 414 0.91 481 1.17 543 1.47 603 1.8 661 2.17 719 2.59 776 3.06 833 3.59 891 4.19 - -
62030 10000 4719 0.35 87 479 1.57 537 1.88 590 2.22 641 2.57 690 2.96 738 3.37 785 3.81 831 4.29 877 4.8 923 5.36
13000 6135 0.61 151 594 3.19 641 3.6 685 4.01 727 4.44 768 4.88 807 5.33 846 5.81 883 6.31 920 6.82 957 7.37
9000 4247 0.25 64 435 1.16 498 1.44 556 1.75 611 2.09 664 2.45 716 2.86 767 3.3 818 3.78 869 4.32 920 4.9
62035 12000 5663 0.42 105 531 2.39 583 2.76 631 3.14 676 3.54 720 3.94 762 4.37 803 4.82 844 5.29 883 5.79 922 6.32
14000 6607 0.58 145 604 3.65 650 4.09 693 4.53 734 4.97 774 5.43 812 5.89 849 6.38 885 6.88 920 7.4 955 7.93
10000 4719 0.26 65 452 1.43 512 1.74 567 2.07 619 2.41 669 2.78 717 3.18 764 3.61 811 4.07 857 4.57 903 5.11
62040 14000 6607 0.48 121 581 3.43 628 3.87 672 4.31 714 4.75 755 5.2 793 5.66 831 6.14 867 6.63 903 7.14 938 7.67
16000 7550 0.64 160 653 4.99 695 5.5 735 6 774 6.5 810 7.01 846 7.52 880 8.04 914 8.57 946 9.12 979 9.67
11000 5191 0.3 76 481 1.81 538 2.15 590 2.5 639 2.87 685 3.25 731 3.66 775 4.09 818 4.55 860 5.04 902 5.56
62045 15000 7079 0.56 139 617 4.15 661 4.63 703 5.1 743 5.57 782 6.05 819 6.54 855 7.03 889 7.54 924 8.07 957 8.61
17500 8258 0.78 195 709 6.45 748 7.01 785 7.56 821 8.11 856 8.66 889 9.21 921 9.77 953 10.34 984 10.92 1014 11.5
13500 6371 0.51 127 579 3.24 627 3.66 671 4.09 714 4.51 754 4.96 793 5.41 831 5.88 868 6.37 905 6.88 941 7.41
62050 16000 7550 0.73 183 672 5.22 714 5.73 753 6.23 790 6.73 827 7.24 862 7.75 896 8.28 929 8.82 961 9.37 993 9.93
19000 8966 1.07 266 790 8.59 825 9.2 859 9.8 892 10.39 924 10.99 955 11.59 985 12.19 1015 12.8 1043 13.42 1072 14.05
16000 7550 0.39 97 297 2.53 331 2.98 364 3.47 395 3.99 425 4.55 455 5.13 483 5.74 510 6.37 536 7.03 562 7.7
62060 20000 9438 0.61 152 356 4.62 384 5.17 411 5.74 437 6.34 463 6.97 488 7.62 512 8.3 536 9 560 9.73 583 10.47
23000 10854 0.82 205 404 6.87 428 7.49 452 8.13 475 8.79 498 9.48 520 10.19 542 10.93 564 11.69 585 12.47 606 13.27
18000 8494 0.54 133 275 2.94 306 3.5 335 4.09 363 4.71 390 5.36 415 6.04 440 6.74 463 7.47 486 8.23 508 9
62070 23000 10854 0.83 206 329 5.54 354 6.22 379 6.92 402 7.66 425 8.42 448 9.2 469 10.01 490 10.84 510 11.69 530 12.56
26000 12269 1.03 257 362 7.68 385 8.44 407 9.22 429 10.02 450 10.85 470 11.7 490 12.57 510 13.46 529 14.38 547 15.31
20000 9438 0.64 160 296 3.84 325 4.45 352 5.08 378 5.75 403 6.44 427 7.16 450 7.91 473 8.68 494 9.47 516 10.28
62080 26000 12269 1.03 257 362 7.68 385 8.44 407 9.22 429 10.02 450 10.85 470 11.7 490 12.57 510 13.46 529 14.38 547 15.31
29000 13685 1.25 312 396 10.33 416 11.16 437 12.01 457 12.89 476 13.78 495 14.7 513 15.64 531 16.59 549 17.57 567 18.56
21000 9910 0.54 135 244 3.27 275 4.01 303 4.8 331 5.65 356 6.54 381 7.46 404 8.42 425 9.4 446 10.41 466 11.44
62090 30000 14157 1.03 256 316 8.1 339 9.05 361 10.05 382 11.11 403 12.2 423 13.34 443 14.52 462 15.72 480 16.96 498 18.23
31000 14629 1.09 271 324 8.84 346 9.81 367 10.84 388 11.91 409 13.03 428 14.19 448 15.39 466 16.62 485 17.88 502 19.17
Table 5
Notes :
1. Areas shaded in grey indicate the operating range of a standard fan motor; out of this range shift to next larger motor size.
2. Internal static pressure is based on pressure drops through the evaporator coil, fan casing and 1" washable flat filters.
3. For external static pressure more than 2.0 in.wg. (498 Pa) and for the data corresponding to the blank boxes, please consult SKM.
10
R-407C
R-410A
REFRIGERANT
Electrical Data
Power Supply: 380~400V/3PH/60Hz
Model Unit Characteristic Compressor Condenser Fan Motor Evaporator Fan Motor
PACS
MFA MCA ICF QTY RLA LRA QTY FLA LRA FLA LRA
61005C 32 17 81 1 11 75 1 1.3 3.9 1.6 9.9
61010C 50 30 148 1 19 140 2 1.3 3.9 3.2 24.6
62015C 50 34 96 2 11 70 2 2.4 7.8 4.5 36.5
62020C 80 53 175 2 19 140 2 2.4 7.8 5.8 41.8
62025C 100 70 200 2 24 145 2 3.9 19.0 7.8 55.4
62030C 125 79 199 2 27 138 2 3.9 19.0 10.8 92.9
62035C 160 92 257 1+1 37 + 27 196 + 138 2 3.9 19.0 10.8 92.9
62040C 160 110 242 4 19 140 4 3.9 19.0 14.1 112.8
62045C 160 122 252 2+2 24 + 19 145 + 140 4 3.9 19.0 14.1 112.8
62050C 200 138 268 4 24 145 4 3.9 19.0 20.3 148.2
62060C 200 151 270 4 27 138 4 3.9 19.0 20.3 148.2
62070C 315 193 358 4 37 196 4 3.9 19.0 20.3 148.2
62080C 315 224 467 3+1 42 + 37 280 + 196 6 3.9 19.0 27.2 228.5
62090C 315 247 545 1+3 56 + 42 353 + 280 6 3.9 19.0 27.2 228.5
Table 6
Legend
MFA Maximum Fuse Amps (for fuse/circuit breaker sizing), ICF Maximum Instantaneous Current Flow.
complies with NEC Article 440-22 & 430-52. RLA Rated Load Amps. (at worst operating condition) .
MCA Minimum Circuit Amps.(for wire sizing), complies with NEC article LRA Locked Rotor Amps.
440-33. FLA Full Load Amps.
Note :
Voltage imbalance not to exceed ± 2 % of the rated voltage.
Field Connections
PACSC series self-contained heavy duty air cooled packaged units are designed for minimum field interaction. Power hook-ups and control wiring of room thermostat
as per field wiring diagram is all that is required to electrically connect any model of PACSC series. Every PACSC series package air conditioning unit requires, at
most, field installed fused disconnect switches or circuit breakers, and room thermostat.
Refer below for schematic representation of required field electrical hook-ups for a standard PACSC series packaged air conditioning unit. All field wiring must be
done in accordance with applicable local and national codes.
For the maximum fuse ampere for fuse sizing and minimum circuit amps for cable sizing, see Page 10.
CIRCUIT BREAKER
OR FUSED
DISCONNECT SWITCH
(NOT BY SKM)
L N
3 PHASE,
3WIRE SYSTEM
460V/3PH/60HZ
3 PHASE,
4WIRE SYSTEM
380-400V/3PH/60HZ
L1
L2
L3
N
GROUND
E
CONTROL POWER SUPPLY
L
N
CONTROL TERMINAL
BLOCK
PACSC SERIES
COOLING STAGE-1 ON / OFF
COOLING STAGE-2 ON / OFF
EVAPORATOR FAN ON / OFF
CONTROL PANEL
LINE VOLTAGE
24V AC
**The PACSC series units rated for 460V/3ph/60Hz or power supplies without neutral require separate source of control power supply through field supplied
and installed 15A/220V fused control disconnect switch or order with factory built in option ‘CXT’.
12
R-407C
R-410A
REFRIGERANT
OL
HPS
LPS
OL
HPS
LPS
OL CS
OL CS
L3
L1
L3 L2
L1 L2
(HP 1)
HP 1
(HP 2)
HP 2
LP 1
LP 2
(LP 1)
(LP 2)
(ON / OFF)
ON / OFF
(HP 1)
HP 1
(HP 2)
HP 2
LP 1
LP 2
(LP 1)
(LP 2)
(ON / OFF)
ON / OFF
MCB
MCB
RLY11 RLY10 RLY9 RLY8 RLY7 RLY6 RLY5 RLY4 RLY3 RLY2 RLY1
W2 W1 Y2 Y1 G C R
RLY11 RLY10 RLY9 RLY8 RLY7 RLY6 RLY5 RLY4 RLY3 RLY2 RLY1
W2 W1 Y2 Y1 G C R
C1
FAN1 FAN2
OUT
C1
OUT FAN2
OUT
X2 FAN1
ECB
OUT
ECB
CTB
X2
CTB
X1
X1
INFAN HTR1 HTR2
P-COM1
INFAN HTR1 HTR2
P-COM1
LEGEND
LEGEND
OD
FIELD WIRING & FIELD SUPPLIED DEVICES
OD
P2
1234
LPS LOW
HIGHPRESSURE
PRESSURESWITCH
SWITCH
HPS
1234
P1
ID
S1
CS CONTROL SWITCH
ID
S1
CM1 CM2
CS
CCH CONTROL SWITCH
CRANK CASE HEATER
CM1 CM2
CCH
CCH
MCB CRANK CASECIRCUIT
MINIATURE HEATERBREAKER
CCH
MCB
EFM MINIATURE
EVAPORATORCIRCUIT BREAKER
FAN MOTOR
CM+CFM
L1
OL OVERLOAD RELAY
CM+CFM
L1
EFM
F1
T5A L250V
OL OVERLOAD RELAY
SEC1
F1
SEC1
C2 C1
PRI1
CM COMPRESSOR MOTOR
C2 C1 COMPRESSOR
CONTROL CIRCUIT
CMC CONTACTOR MOTOR
CONTROL CIRCUIT
BLACK C
ECB CONTACTOR
ELECTRONIC CONTROL BOARD
10V
RED BLACK
BLACK
ECB
PTB ELECTRONIC CONTROL
POWER TERMINAL BOARD
BLOCK
240V
10V
WHITE
RED RED
PTB POWER TERMINAL BLOCK
BLACK
24V
CTB
TFR
RED
WHITE
WHITE
24V
CTB
TFR CONTROL TERMINAL
TRANSFORMER BLOCK
TFR WHITE
TFR TRANSFORMER
* ONFORREQUEST.
ON REQUEST.
DIAGRAMS FOR 460V/3Ph/60Hz POWER SUPPLY ARE AVAILABLE
**L1
PTB
*POWER SUPPLY(V/Ph/Hz) *FOR 460V/3Ph/60Hz OR POWER SUPPLIES WITHOUT NEUTRAL, CXT OPTION
**L1 L2
PTB
*POWER SUPPLY(V/Ph/Hz) * IS A MUST.
IS A460V/3Ph/60Hz
MUST. OR POWER SUPPLIES WITHOUT NEUTRAL, CXT OPTION
L3
L2
L3
N
** PROVIDE OVERCURRENT, EARTH FAULT PROTECTION, SHORT CIRCUIT AND
** PROVIDE
N E C1 C2 DISCONNECT MEANS AS REQUIRED
OVERCURRENT, BY LOCAL
EARTH FAULT & NATIONAL
PROTECTION, ELECTRIC
SHORT CIRCUITCODE.
AND
C1 C2
OL
LPS
OL
HPS
LPS
OL CS
L1
L3
L2
OL CS
L1
L3
L2
THERMOSTAT ( BY OTHERS )
CM CFM1 CFM2 EFM R C ( BYGOTHERS
THERMOSTAT Y )
CM CFM1 CFM2 EFM R C G Y
LP 1
LP 2
(HP 1)
HP 1
(HP 2)
HP 2
(ON / OFF)
(LP 1)
(LP 2)
ON / OFF
LP 1
LP 2
(HP 1)
HP 1
(HP 2)
HP 2
(ON / OFF)
(LP 1)
(LP 2)
ON / OFF
MCB
RLY11 RLY10 RLY9 RLY8 RLY7 RLY6 RLY5 RLY4 RLY3 RLY2 RLY1
MCB
W2 W1 Y2 Y1 G C
RLY11 RLY10 RLY9 RLY8 RLY7 RLY6 RLY5 RLY4 RLY3 RLY2 RLY1
FAN1 FAN2
FAN2 OUT
W2 W1 Y2 Y1 G C R
C1
OUT
FAN1 OUT
C1
ECB
OUT
X2
ECB CTB
X2
X1
CTB
INFAN HTR1 HTR2
X1
P-COM1
INFAN HTR1 HTR2
P-COM1
OD
P2
OD
1234
P2
P1
ID
S1 1234
CM2
P1
ID
S1
CM2
CM1
CCH
CM+CFM1
CM1
CCH
L1
T5A L250V
EFM
CM+CFM1
F1
SEC1
N1
L1
PRI1
T5A L250V
C2 C1
EFM
F1
SEC1
N1
PRI1
C2 C1 CONTROL CIRCUIT
BLACK
10V
BLACK
WHITE
10V
RED
24V
TFR
RED BLACK
WHITE
240V
WHITE
RED
24V
TFR WHITE
HPS1
HPS2
C3 C4
LPS1
LPS2
HPS2 HPS2OL
C1 C2 C3
HPS1 HPS1
C4
LPS1 LPS1
LPS2 LPS2
OL
C1 C2 C5
E CS
C3 C4 OL
CS
OL
C1 C2 OL
L3 L3 OL CS
L1 L2 L1 L2 THERMOSTAT ( BY OTHERS )
L3 L3
L1 L2 L1 L2
CFM1 CFM2 THERMOSTAT ( BY OTHERS )
R C G Y1 Y2
L3 CM1
L3
CFM1
CM2 CFM2 EFM R C G Y1 Y2
L1
CM1
L2 L1
CM2
L2
EFM THERMOSTAT ( BY OTHERS )
TK-2
TK-1
CFM1 CFM2 G
TK-2
TK-1
R C Y1 Y2
HP 1 (ONHP/ OFF)
2 1)
1 2)
2 1)
(LP 2)
/ OFF
LP 1
LP 2
HP 1
HP 2
CM1 CM2 EFM
LP(LP
(HP
(HP
(ON / OFF)
(HP 1)
ON 2)
(LP 1) (LP 1)
(LP 2) (LP 2)
ON / OFFON / OFF
LP
HP
(HP 2) (HP
TK-2
TK-1
(ON / OFF)
FAN2 (HP 1)
LP 1
LP 2
HP 2
RLY1
R
RLY1OUTRLY1
MCB
C
MCB
C
RLY2
FAN2
G
OUT
RLY2
GR
C1 C2
W2 W1 Y2 Y1
MCB
FAN1
RLY2 OUT
C1 C2
C
G Y1
FAN2
FAN1
RLY3
OUT
OUT
ECB
RLY3
ECB
Y1 Y2
FCS1
FCS2
C2
RLY3 X2
C1
Y2 W1
FAN1
CTB
OUT
RLY4
FCS1
FCS2
X2
CTB
ECB
RLY4
W2 W1 W2
X1
LEGEND
LEGEND
FCS1
FCS2
X1
RLY5
X2
RLY4
RLY5
RLY5 HTR2 CTB
P-COM1
FIELD WIRING & FIELD SUPPLIED DEVICES
HTR2
LEGEND
X1
OD P-COM1 P-COM1
FIELD WIRING & FIELD SUPPLIED DEVICES
RLY6
LPS LOW PRESSURE SWITCH
INFAN HTR1
RLY6
RLY7
HPS HIGH PRESSURE SWITCH
RLY6
RLY7
LPS CS
LOW PRESSURE CONTROL
SWITCH SWITCH
OD
RLY8 CS CONTROL SWITCH
HPS CCH
HIGH PRESSURE CRANK
SWITCHCASE HEATER
P2
P1 RLY7
RLY9 RLY8
1234
CS CONTROL SWITCH
MCB MINIATURE CIRCUIT BREAKER
RLY9
ID OD
1234
EFM HEATER
EVAPORATOR FAN MOTOR
TK-2
TK-1
CM2 RLY8
ID
CCH CRANK CASE
S1
P1
TK-1
P2
S1
OL OVERLOAD RELAY
RLY11 RLY10
EFM EVAPORATOR
TK-2
TK-1
ID
CFM CONDENSER FAN MOTOR
CCH2
S1
CCH1
OL OVERLOAD CMRELAY
COMPRESSOR MOTOR
CCH2
CCH1
CM1
RLY11 L1RLY10
CM2
CM COMPRESSOR MOTOR
CFM MPM FANMOTOR
CONDENSER MOTOR PROTECTOR MODULE
MPM MOTOR PROTECTOR MODULE
T5A L250V
CCH2
C MOTOR
CONTACTOR
CCH1
CFM2
CFM1
CM1
L1
CM COMPRESSOR
CM2
CM1
T5A L250V
EFM
F1
C CONTACTOR
CFM2
CFM1
SEC1
CM2
CM1
EFM
SEC1N1
PRI1
C4 C3 C5 C2 C1
PTBC CONTACTOR
CFM2
CFM1
CM1
EFM
F1
CONTROL CIRCUIT
N1
PRI1
ECB
CTB ELECTRONIC
CONTROL CONTROL
TERMINAL BOARD
BLOCK
CONTROL CIRCUIT BLACK
C4 C3 C5 C2 C1 FCS FAN CYCLE SWITCH
BLACK
PTB
FCS POWER
FAN TERMINAL
CYCLE SWITCH BLOCK
10V
RED BLACK
TFR TRANSFORMER
240V
CONTROL CIRCUIT
RED BLACK WHITE CTB
TFR CONTROL TERMINAL BLOCK
TRANSFORMER
240V
RED
24V
RED
WHITE
BLACK
TFR
TK THERMAL OVERLOAD PROTECTION
FCS FAN CYCLEOVERLOAD
SWITCH PROTECTION
24V
WHITE
TK THERMAL
10V
TFR
RED
WHITE
BLACK
TFR TRANSFORMER
240V
WHITE
RED
24V
PACSPACSC
Model: MODEL:
6203562035
62035C
WIRING DIAGRAM
OR 4 WIRE SHOWN
POWER HERE IS ONLY FOR 380-400V/3Ph/60Hz,
SUPPLIES.
NOTE
PACSC MODEL: OR 4 WIRE POWER SUPPLIES.
* ONDIAGRAM
WIRING DIAGRAMS FOR 460V/3Ph/60Hz POWER SUPPLY ARE AVAILABLE
* WIRING
TYPICALDIAGRAMS
WIRING FOR SHOWN HERE
460V/3Ph/60Hz
REQUEST.
IS ONLY
POWER FOR 380-400V/3Ph/60Hz,
SUPPLY ARE AVAILABLE
PACSC
** MODEL: 62035
PTB
PTB
*POWER SUPPLY(V/Ph/Hz)
OR REQUEST.
ON 4 WIRE POWER SUPPLIES.
* FOR 460V/3Ph/60Hz OR POWER SUPPLIES WITHOUT NEUTRAL, CXT OPTION
**L1 *POWER SUPPLY(V/Ph/Hz)
L1
L2
* FOR
WIRING DIAGRAMS
460V/3Ph/60Hz FORPOWER
IS AOR
ONAREQUEST.
IS MUST.
460V/3Ph/60Hz
MUST. SUPPLIESPOWER
WITHOUTSUPPLY ARE AVAILABLE
NEUTRAL, CXT OPTION
L2 PTB L3
*POWER SUPPLY(V/Ph/Hz)
**L1 L3N N
* FOR 460V/3Ph/60Hz OR POWER SUPPLIES WITHOUT NEUTRAL, CXT OPTION
IS A MUST.** PROVIDE OVERCURRENT, EARTH FAULT PROTECTION, SHORT CIRCUIT AND
L2
L3 E
E
C1
C1
C3 C4C5
C5
** PROVIDE OVERCURRENT, EARTH
DISCONNECT FAULT
MEANS ASPROTECTION,
REQUIRED BYSHORT
LOCALCIRCUIT AND ELECTRIC CODE.
& NATIONAL
DISCONNECT MEANS AS REQUIRED BY LOCAL & NATIONAL ELECTRIC CODE.
N C2 C3 C4
C2
E C1 L2
C5
OL
OL ** PROVIDE OVERCURRENT, EARTH FAULT PROTECTION, SHORT CIRCUIT AND
DISCONNECT MEANS AS REQUIRED BY LOCAL & NATIONAL ELECTRIC CODE.
L1 L3 C3 C4
MPM1
L1
L2
L3 C2
MPM1 L3
HPS1
HPS2
LPS1
LPS2
T2 T1 M2 M1 S2 S1 L1 L2
HPS2OL
CM1 L3 OL
HPS1
LPS1
LPS2
T2 T1 M2 M1 S2 S1 L1 L2
OL
L1
CM1
L2
L3
MPM1 CM2 CFM1 CFM2 EFM CS
CS M2
EFM
MPM1
HPS2
MPM1
LPS1
LPS2
T2 T1 M2 M1 S2 S1 L1 L2
OL
CM1 M1
M1
CS THERMOSTAT ( BY OTHERS )
CM2
TO CONTROL CIRCUIT CFM1 CFM2 EFM M2 THERMOSTAT ( BY OTHERS )
MPM1
TO CONTROL CIRCUIT R C G Y1 Y2
M1 R C G Y1 Y2
THERMOSTAT ( BY OTHERS )
TO CONTROL CIRCUIT
(ON / OFF)
2 1)
1 2)
2 1)
(LP 2)
/ OFF
LP 1
LP 2
HP 1
HP 2
R C G Y1 Y2
LP(LP
(HP
(HP
(ON / OFF)
(HP 1)
ON 2)
(LP 1)
(LP 2)
ON / OFF
HP 1
LP
HP
(HP
RLY1
(ON / OFF)
(HP 1)
(HP 2)
(LP 1)
(LP 2)
ON / OFF
LP 1
LP 2
HP 1
R
HP
RLY1
MCB
R
MCB
RLY2FAN2
OUT
C
RLY2
FAN2
G
OUT
C1 C2
W2 W1 Y2 Y1
RLY1
RLY3 FAN1
OUT
MCB C1 C2
RLY3
FAN1
OUT
ECB
FAN1 FAN2
ECB
OUT
FCS2
X2
CTB
RLY4
FCS1
FCS2
X2
C1 C2 CTB
OUT
ECB
X1
RLY5
FCS1
FCS2
X2
CTB
P-COM1
RLY7 RLY6 RLY4
P2 INFAN HTR1 HTR2
P-COM1
RLY6
X1
P2 INFANRLY5
RLY7
P2 INFAN HTR1 HTR2
P-COM1
RLY8 RLY6
OD
RLY8
OD
RLY9 RLY7
1234
RLY9
1234
P1
ID
IDOD
S1
P1
RLY10RLY8
S1
RLY11 RLY10
CM1 CM2
CM1 CM2
1234
RLY11RLY9
CCH1
CCH2
P1
ID
CCH1
CCH2
S1
RLY11 RLY10
CM2
L1
T5A L250V
CFM2
CFM1
L1
CM2
CM1
F1
CCH1
CCH2
CFM2
CFM1
CM1
SEC1
CM2
CM1
EFM
SEC1N1
PRI1
F1
N1
PRI1
C4 C3 C5 C2 C1
C4 C3 C5 C2 C1
L1
CFM2
CFM1
CONTROL CIRCUIT
CM2
CM1
EFM
F1
CONTROL CIRCUIT
SEC1
10V N1
BLACK
PRI1
10V
BLACK
C4 C3 C5 C2 C1 RED BLACK
240V
RED
24V
WHITE
CONTROL CIRCUIT RED
TFR
10V 24V
WHITE
TFR BLACK
WHITE
RED BLACK
240V
WHITE
RED
24V
TFR WHITE
14
R-407C
R-410A
REFRIGERANT
TK-2
TK-3
TK-4 OL
*POWER SUPPLY(V/Ph/Hz)
C1 C2 C3 C4 C5 C6 C7 C8 C9
CFM1 CFM2 CFM3 CFM4
TANDEM COMPRESSOR-1 TANDEM COMPRESSOR-2
N L1 CM1 CM2 CM3 CM4 EFM
MCB1 OL
TK-1
TK-2
TK-3
TK-4
TANDEM COMPRESSOR-1 TANDEM COMPRESSOR-2 CFM1 CFM2 CFM3 CFM4
CM1 CM2 CM3 CM4 EFM
C1 C2 C3MCB1 C4 C5 C6 C7 F1 C8 C9 F2
TK-1
TK-2
TK-3
TK-4
C1 C2 C3 C4
L1 TANDEM COMPRESSOR-1 TANDEM COMPRESSOR-2
OL
C1 C2 C3 C4 F1 F2
MCB2 CS1 CS2
C1 C2 C3 C4
CFM1 CFM2 CFM3 CFM4
MCB2 C1 C2 C3 C4
CM1 CM2 CM3 CM4 CS1 CS2
EFM F1 F2
MCB1
TK-1
TK-2
TK-3
TK-4
C10 C10
CR1 C1 C2 C3 C4
FCS1
FCS2
F1 F2
OL
C R G Y1 Y2 Y3 Y4
LPS LOW PRESSURE SWITCH FIELD WIRING & FIELD SUPPLIED
FCS1
FCS2
LPS1 LPS2 C1 C2 C3 C4
OL
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
EVAPORATOR FAN MOTOR
CS1 CS2
C R G Y1 Y2 Y3 Y4 CS CONTROL SWITCH
CCH CRANK CASE HEATER
STAGE - 1
STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
FCS1
FCS2
CCH CRANK CASE HEATER
OL
MCB LPS
MINIATURE CIRCUIT LOW PRESSURE SWITCH
BREAKER
LPS1 LPS2 MCB MINIATURE CIRCUIT BREAKER
EVAPORATOR FANHPSMOTORHIGH PRESSURE SWITCH
COOLING STAGECOOLING
COOLING STAGECOOLING
CS CONTROL SWITCH
CR1 CR2 CR3 CR4 CR5 OL OVERLOAD RELAY
COOLING STAGE - 1
-3
-4
EVAPORATOR FAN MOTOR
TK-1
TK-2
TK-3
TK-4
CR2 CR3 CR4 CR5 OL OVERLOAD RELAY
TK-1
TK-2
TK-3
TK-4
CCH CRANK CASE HEATER
CCH1
CCH2
CCH3
CCH4
CCH1
CCH2
CCH3
CCH4
TK-1
TK-2
TK-3
TK-4
M
F CONTROL FUSE
CCH1
CCH2
CCH3
CCH4
FCS1
FCS2
CR CONTROL RELAY CM COMPRESSOR MOTOR
OL
CR1 CR2 CR3 CR4 CR5 C9 TDR1 TDR1 C1 TDR2 TDR2 C2 TDR3 TDR3 C3 TDR4 TDR4 C4 C5 C6 C7 C8 LPS LOW PRESSURE SWITCH TDR TIME DELAY RELAY
C9 TDR1 LPS1C1 TDR2 C2 TDR3 LPS2C3 TDR4 C4 C5 C6 C7 C8 TDR TIME DELAY RELAY C CONTACTOR
HPS HIGH PRESSURE PTB POWER TERMINAL BLOCK
F SWITCH
CONTROL FUSE
E PTB POWER TERMINAL BLOCK TFR TRANSFORMER
CS CONTROL SWITCH
CR CONTROL RELAY
COOLING STAGE - 1
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
TFR TRANSFORMER
EVAPORATOR FAN MOTOR
TK-2
TK-3
TK-4 NOTE
CCH1
CCH2
CCH3
CCH4
4 WIRE*
* CR
TYPICAL WIRING DIAGRAM
CONTROL RELAY SHOWN HERE IS ONLY FOR 380-400V/3Ph/6
C9 TDR1 C1 TDR2 C2 TDR3 C3 TDR4 C4 C5 C6 C7 C8 * WIRING DIAGRAMS FOROR OR
ON REQUEST. TDR
FOR 460V/3Ph/60Hz
460V/3Ph/60Hz
POWERPOWER
TIME DELAY
IS A MUST.
ORARE
SUPPLY
SUPPLIES.
RELAY
POWER SUPPLIES WITHOUT NEU
AVAILABLE
*PTB
WIRING DIAGRAMS FOROR 460V/3Ph/60Hz POWER SUPPLY ARE AVAILA
POWER TERMINAL BLOCK
* FOR ON REQUEST.
460V/3Ph/60Hz OR POWER
TFR
SUPPLIES WITHOUT NEUTRAL, CXT OPTION
TRANSFORMER
** PROVIDEOROVERCURRENT, EARTH FAULT NEUTRAL,
PROTECTION, SHO
PACSC MODEL: 62050
IS A MUST.
* TK
FOR 460V/3Ph/60Hz POWER SUPPLIES
DISCONNECT
THERMAL
IS A MUST.
WITHOUT
MEANS
OVERLOAD
CXT OPT
AS REQUIRED BY LOCAL & NATIONA
PROTECTION
L3
N NOTE
**L1
PTB
E *POWER SUPPLY(V/Ph/Hz) *POWER SUPPLY(V/Ph/Hz)
L2 * TYPICAL WIRING DIAGRAM SHOWN HERE IS ONLY FOR 380-400V/3Ph/60Hz,
OR 4 WIRE POWER SUPPLIES.
L3 C5 C6 C7 C8
C1 C2 C3 C4 C11
C9 C10
* WIRING
N
DIAGRAMS FOROR 460V/3Ph/60Hz POWER SUPPLY ARE AVAILABLE
E
N L1 ON REQUEST.
OL
C1
C5
C2
C6
C3
C7
C4
C8
C5 C6
CFM1
C7
CFM2
C8
CFM3 C9
CFM4 C10 C11 * FOR 460V/3Ph/60Hz OR POWER SUPPLIES WITHOUT NEUTRAL, CXT OPTION
IS A MUST.
C1 C2 C3 C4 C11
C9 C10 V1
W1 W2
U2
MCB1 OL EFM
TK-1
TK-2
TK-3
TK-4
MCB1 EFM
TK-1
TK-2
TK-3
TK-4
W1 W2
V1 U2
EFM
TK-1
TK-2
TK-3
TK-4
MCB2 C1 C2 C3 C4
CS1 CS2
F1 F2
C1 C2 C3 C4
C1 C2 C3 C4 C5 C6 C7 C8
C9 C10 C11
MCB2 C1 C2 C3F1 C4 F2 C10 C10
CR1 CS1 CS2
L1 C1 C2 C3 C4
OL
MCB2 C1 C2 C3 C4TFR
CS1 CS2
CFM1 CFM2 CFM3 CFM4 C10
HPS1
C10
HPS2
THERMOSTAT ( BY OTHERS ) CR1 W1 W2
U2 M M
V1
MCB1 EFM
FCS1
FCS2
TK-1
TK-2
TK-3
TK-4
OL
TFR
C10 C10 LPS1 LPS2
CR1
THERMOSTAT ( BY OTHERS ) HPS1 HPS2
TANDEM COMPRESSOR-1 TANDEM COMPRESSOR-2 M M
C R G Y1 Y2 Y3 Y4
STAGE - 1
STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
STAGE - 2 FAN MOTOR
FCS1
FCS2
OL
FR LPS1 LPS2
COOLING STAGECOOLING
COOLING STAGECOOLING
C R G Y1 Y2 Y3 Y4
OL - 1
-3
-4
EVAPORATOR FAN MOTOR
F1 F2
CR2 CR3 CR4 CR5
TK-1
TK-2
TK-3
TK-4
COOLING STAGE
FCS1
FCS2
CCH1
CCH2
CCH3
CCH4
C1 C2 C3 C4
LPS1 LPS2
COOLING
TDR5
CR1 CR2 CR3 CR4 CR5 C11 C9 TDR1 TDR2 TDR3 TDR4
MCB2 C1 C2 C3 C4 C11 C10
CS1 CR2 CS2 CR3 CR4 CR5
TK-1
TK-2
TK-3
TK-4
CCH1
CCH2
CCH3
CCH4
COOLING STAGE - 1
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
EVAPORATOR FAN MOTOR
CR1 CR2 CR3 CR4 CR5 C9 TDR5 C10 C11 TDR1 TDR1 C1 TDR2 TDR2 C2 TDR3 TDR3 C3 TDR4 TDR4 C4 C5 C6 C7 C8
C10 C11 C10 C10
TDR5
C11 C9 CR1
E
CR2 CR3 CR4 CR5
TK-1
TK-2
TK-3
TK-4
CCH1
CCH2
CCH3
CCH4
FCS2
OL
E
LPS1 LPS2
C9 TDR5 C10 C11 TDR1 C1 TDR2 C2 TDR3 C3 TDR4 C4 C5 C6 C7 C8
COOLING STAGE - 1
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
EVAPORATOR FAN MOTOR
TDR5
C11 C9
CR2 CR3 CR4 CR5
TK-1
TK-2
TK-3
TK-4
CCH2
CCH3
CCH4
C10 C10
CR1
THERMOSTAT ( BY OTHERS )
G Y1 Y2 Y3 SKM High Efficiency Packaged Air Conditioners
Y4
HPS1
M
HPS2
M PACS-C Series LEGEND
FIELD WIRING & FIELD SUPPLIED DEVICES
FCS1
FCS2
OL
LPS LOW PRESSURE SWITCH
LPS1 LPS2
HPS HIGH PRESSURE SWITCH
CS CONTROL SWITCH
COOLING STAGE - 1
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
EVAPORATOR FAN MOTOR
TK-1
TK-2
TK-3
TK-4
CCH1
CCH2
CCH3
TK-2
TK-3
TK-4
L2
L3
N NOTE
SSOR-1 TANDEM COMPRESSOR-2
E
N L1
OL
* WIRING DIAGRAMS FOROR 460V/3Ph/60Hz POWER SUPPLY ARE AVAILABLE
ON REQUEST.
F1 F2
C1 C2 MCB1 C3 C4 EFM
TK-1
TK-2
TK-3
TK-4
CS1 CS2
C10 C10
CR1
*POWER SUPPLY(V/Ph/Hz) F1 F2
C1 C2 C3 C4 C1 C2 C3 C4
FCS1
FCS2
OL
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
TFR OL
HPS1 HPS2
CCH CRANK CASE HEATER
THERMOSTAT ( BY OTHERS ) M M FIELD WIRING & FIELD SUPPLIED DEVICES
C R G Y1 Y2 Y3 Y4 MCB MINIATURE CIRCUIT BREAKER
CFM1 CFM2 CFM3 CFM4 LPS LOW PRESSURE SWITCH
FCS1
FCS2
EFM EVAPORATOR FAN MOTOR
OL
W1 W2
V1 U2
HPS HIGH PRESSURE SWITCH
CM2 CM3 CM4 U1 V2
LPS1 LPS2
CR2 CR3 EFM CR4 CR5 TK-1 OL OVERLOAD RELAY
CS CONTROL SWITCH
TK-2
TK-3
TK-4
TK-1
TK-2
TK-4
CCH1
CCH2
CCH3
CCH4
COOLING STAGE - 2
COOLING STAGE - 4
EVAPORATOR FAN MOTOR
TK-1
TK-2
TK-3
TK-4
CCH1
CCH2
CCH3
CCH4
Typical Wiring Diagram * TYPICAL WIRING DIAGRAM SHOWN HERE IS ONLY FOR 380-400V/3Ph/60Hz,
NOTE
THERMOSTAT ( BY OTHERS )
For Units With Four Compressors: HPS1
M
HPS2
M
OR 4 WIRE POWER SUPPLIES.
* TYPICAL WIRING DIAGRAM SHOWN HERE IS ONLY FOR 380-400V/3Ph/60Hz,
* WIRING
PACS Model:
Model:62070C
G Y1 Y2 Y3 Y4 DIAGRAMS FOROR
OR460V/3Ph/60Hz POWER SUPPLY ARE AVAILABLE
4 WIRE POWER SUPPLIES.
PACS 62070 CH
FCS1
FCS2
ON REQUEST.
* ON REQUEST.
WIRING DIAGRAMS FOROR 460V/3Ph/60Hz POWER SUPPLY ARE AVAILABLE
OL
LPS1 LPS2
*POWER SUPPLY (V/Ph/Hz) * FOR 460V/3Ph/60Hz OR POWER SUPPLIES WITHOUT NEUTRAL, CXT OPTION
IS A MUST. * FOR 460V/3Ph/60Hz OR POWER SUPPLIES WITHOUT NEUTRAL, CXT OPTION
**L1 IS A MUST.
COOLING STAGE - 1
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
EVAPORATOR FAN MOTOR
L2
L3
** PROVIDE OVERCURRENT, EARTH
PROVIDEFAULT PROTECTION,
** SHORT CIRCUIT AND
62050
N OVERCURRENT, EARTH FAULT PROTECTION, SHORT CIRCUIT AND
PACSC MODEL:
C11
E
C9
62080TDR5 C1 C2 C3 C4
DISCONNECT
DISCONNECT MEANS AS REQUIRED BYMEANS
LOCALAS&REQUIRED BY LOCAL
NATIONAL & NATIONAL
ELECTRIC CODE.ELECTRIC CODE.
C5 C6 C7 C8
CR2 CR3 CR4 CR5
TK-1
TK-2
TK-3
TK-4
PTB
*POWER SUPPLY(V/Ph/Hz)
CCH1
CCH2
CCH3
CCH4
**L1
*POWER SUPPLY(V/Ph/Hz) C9 C10 C11
L2 L2 L2 L2 L2
L1 L3 L1 L3 L1 L3 L1 L3
L3 N L1 MPM1 MPM2 MPM3 MPM4
CR1 CR2 CR3 CR4 CR5 N TDR1 TDR2 TDR3 TDR4 OL
T2 T1 M2 C11
M1 S2 S1 C10 T2 T1 M2 M1 S2 S1 T2 T1 M2 M1 S2 S1 T2 T1 M2 M1 S2 S1
E CM1 CM2 CM3 CM4 CFM1 CFM2 CFM3 CFM4
C1 C2 C3 C4
W1 W2
U2
TK-1
TK-2
TK-3
TK-4
V1
TANDEM COMPRESSOR-1 TANDEM COMPRESSOR-2 U1 V2
C5 C6 C7 C8 C9 C10
MCB1 C11EFM C12 C13
C9 TDR5 C10L1 C11 TDR1 C1 TDR2 C2 TDR3 L1 C3 TDR4 C4 C5 C6 C7 C8
L2 L2 L2 L2
N L1
C5 C6 C7 L3
C8 L3
2 C3 C4 MPM2
L1 L3
C11 MPM4
L1 L3
OL
C9 C10
MPM1 TO CONTROL CIRCUIT TO CONTROL CIRCUIT MPM3 TO CONTROL CIRCUIT TO CONTROL CIRCUIT
C4 M2 M1
CM1
T2 T1 M2 M1 S2 S1
CM2 M2 M1
CM3
T2 T1 M2 M1 S2 S1
CM4
C5
T2 T1 L1 L2 L3
C6 C7 C8 T2 T1 L1 L2 L3
CFM1 CFM2 CFM3 CFM4 CFM5 CFM6
OL U1
V1
W1 W2
U2
V2
TK-2
TK-3
TK-4
TK-5
TK-6
TK-2
TK-3
TK-4
T2 T1 M2 M1 S2 S1
M3 CM4 CFM1 CFM2 CFM3 CFM4 C1 C2 C3 C4 C1 C2 C3 C4
LPS LOW PRESSURE SWITCH
HPS HIGH PRESSURE SWITCH
CS CONTROL SWITCH
SSOR-1 TANDEM COMPRESSOR-2 MCB2 C1 C2 C3 C4 W1 W2
U2 CS1 CS2
TK-1
TK-2
TK-3
TK-4
V1
U1 V2 CCH CRANK CASE HEATER
MCB MINIATURE CIRCUIT BREAKER
EFM EFM EVAPORATOR FAN MOTOR
C10 C10 OL OVERLOAD RELAY
CFM CONDENSER FAN MOTOR
CR1 F1 F2
CM COMPRESSOR MOTOR
UIT TO CONTROL CIRCUIT F1 F2 C1 C2 C3 C4 C1 C2 C3 C4 C CONTACTOR
FCS FAN CYCLING SWITCH
HPS1 C1 C2 HPS2 C3 C4
TFR C1 C2 C3 C4 M M LSV LIQUID SOLENOID VALVE
CS1 CS2
THERMOSTAT ( BY OTHERS ) TFR TRANSFORMER
C1 C2 C3 C4
220~230V
C R G Y1 Y2 CS1
Y3 Y4 CS2 PTB POWER TERMINAL BLOCK
24V
FCS2
C6 C7 C8
OL
COOLING STAGE - 1
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
MPM3
MPM2
MPM4
FCS2
FCS3
FCS4
TK-2
TK-3
TK-4
CCH2
CCH3
CCH4
W1 W2
THERMOSTAT ( BY OTHERS ) U2
CR2 CR3 CR4MOTOR CR5
TK-1
TK-2
TK-3
TK-4
V1
Y1 Y2 Y3 Y4 U1 V2 EFM EVAPORATOR FAN FOR 460V/3Ph/60Hz OR POWER SUPPLIES WITHOUT NEUTRAL, CXT OP
* IS A MUST.
C R G Y1 Y2 Y3 Y4
FCS1
FCS2
CR1 CR2 CR3 CR4 CR5 CFM PROVIDE OVERCURRENT, EARTH FAULT PROTECTION SHORT CIRCUIT
LPS1 LPS2 C11 C10 TDR1 TDR2 CONDENSER FAN MOTORTDR3 TDR4 ** DISCONNECT MEANS AS REQUIRED BY LOCAL & NATIONAL ELECTRICA
CM COMPRESSOR MOTOR
E
M2 M2 M2 C CONTACTOR
M2
MPM1
MPM2
MPM3
MPM4
COOLING STAGE - 1
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
COOLING STAGE - 1
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
TK-2
TK-3
TK-4
TK-5
TK-6
CCH1
CCH2
CCH3
CCH4
FCS2
TK-1
TK-2
TK-3
TK-4
CCH2
CCH3
CCH4
C13 LEGEND
C12 TK THERMAL OVERLOAD RELAY
CR1 CR2 CR3 CR4 CR5
FIELD WIRING & FIELD SUPPLIED DEVICES
CR2 CR3 CR4 CR5 E
TDR1 TDR2 LOW PRESSURE SWITCH TDR3
LPS TDR4
C3 C4 C1 C2 C3
C11 C4
C10
C9HPS TDR5 C10 C11 TDR1 C1 TDR2 C2 TDR3 C3 TDR4 C4 C5 C6 C7 C8 C9 C10
HIGH PRESSURE SWITCH
M2 M2 M2 M2 CS CONTROL SWITCH
MPM1
MPM3
MPM2
MPM4
NOTE:
CCH CRANK CASE HEATER
M1 M1 M1 M1 TYPICAL WIRING DIAGRAM SHOW HERE IS ONLY FOR 380V/3Ph/60Hz OR
C9 TDR5 C10 C11 TDR1 C1 TDR2MCB C2MINIATURE CIRCUIT BREAKER
TDR3 C3 TDR4 C4 * C5 C6 C7 C8
4 WIRE POWER SUPPLIES.
EFM EVAPORATOR FAN MOTOR
WIRING DIAGRAMS FOR 220V/3Ph/60Hz OR 460V/3Ph/50Hz POWER SUPPLY
OL OVERLOAD RELAY *
TK-1
TK-2
TK-3
TK-4
FCS2
16
M2
MPM4
NOTE:
M1 TYPICAL WIRING DIAGRAM SHOW HERE IS ONLY FOR 380V/3Ph/60Hz OR
* 4 WIRE POWER SUPPLIES.
WIRING DIAGRAMS FOR 220V/3Ph/60Hz OR 460V/3Ph/50Hz POWER SUPPLY
*
TK-1
TK-2
TK-3
TK-4
COOLING STAGE - 1
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
EVAPORATOR FAN MOTOR
MCB MINIATURE CIRCUIT BREAKER
EFM EVAPORATOR FAN MOTOR
TDR5
C11 C9 OL OVERLOAD RELAY
CR2 CR3 CR4 CR5 CFM CONDENSER FAN MOTOR
TK-1
TK-2
TK-3
TK-4
CCH1
CCH2
CCH3
CCH4
CM COMPRESSOR MOTOR
LSV1 LSV2
R-407C
MPM MOTOR PROTECTOR MODULE
CR1 CR2 CR3 CR4 CR5 TDR1 TDR2 TDR3 TDR4
C11 C10 C CONTACTOR
F CONTROL FUSE
R-410A
E
CR CONTROL RELAY
REFRIGERANT
C9 TDR5 C10 C11 TDR1 C1 TDR2 C2 TDR3 C3 TDR4 C4 C5 C6 C7 C8 TDR TIME DELAY RELAY
PTB POWER TERMINAL BLOCK
LSV LIQUID LINE SOLENOID VALVE
TFR TRANSFORMER
TK THERMAL OVERLOAD PROTECTION
* WIRING
Units with Four Compressors:
DIAGRAMS FOROR 460V/3Ph/60Hz POWER SUPPLY ARE AVAILA
ON REQUEST.
PACS Model:
PACSC 62080C
MODEL: 62080 ** PROVIDE OVERCURRENT, EARTH FAULT PROTECTION, SHORT CIRCUIT A
DISCONNECT MEANS AS REQUIRED BY LOCAL & NATIONAL ELECTRIC CO
PTB
**L1 *POWER SUPPLY(V/Ph/Hz)
L2
L3
N
E
C1 C2 C3 C4
MCB1 EFM
TK-1
TK-2
TK-3
TK-4
TK-5
TK-6
TO CONTROL CIRCUIT TO CONTROL CIRCUIT TO CONTROL CIRCUIT TO CONTROL CIRCUIT
F1 F2
C1 C2 C3 C4 C1 C2 C3 C4
C1 C2 C3 C4
CS1 CS2
C12 C12
MCB2 CR1
HPS1 HPS2
M M
FCS1
FCS2
FCS3
FCS4
OL
THERMOSTAT ( BY OTHERS )
C R G Y1 Y2 Y3 Y4
MPM2
MPM3
MPM4
COOLING STAGE - 1
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
EVAPORATOR FAN MOTOR
PTB
*POWER SUPPLY(V/Ph/Hz) M1 M1 M1 M1
L1 TDR5
C13 C11
L2
CR2 CR3 CR4 CR5
TK-1
TK-2
TK-3
TK-4
TK-5
TK-6
L3
CCH1
CCH2
CCH3
CCH4
N
**E
C1 C2 TDR1 TDR2
LSV1
TDR3 TDR4
LSV2
C3 C4 C5 C13 C6C12 C7 C8
CR1 CR2 CR3 CR4 CR5
C9 C10 C11
L1 E L1
L2 L2
L3 L3 C9 TDR5 C10 C11 TDR1 C1 TDR2 C2 TDR3 C3 TDR4 C4 C5 C6 C7 C8 C9 C10
OL
MPM1 MPM2
M2 M1
CM1 M2 M1
CM2 CFM1 CFM2 CFM3 CFM4 CFM5 CFM6
T2 T1 L1 L2 L3 T2 T1 L1 L2 L3
W1 W2
U2
TK-5
TK-4
V1
TK-3
TK-2
TK-6
TK-1
U1 V2
EFM
HPS2
LPS1
LPS2
OL
MPM2
PTB M1 M1
**L1 *POWER SUPPLY(V/Ph/Hz)
THERMOSTAT ( BY OTHERS )
L2
L3 R C G Y1 Y2
N
E
C1 C2 C3 C4
(HP 1)
LP 1
LP 2
HP 1
(HP 2)
HP 2
ON / OFF
(ON / OFF)
(LP 1)
(LP 2)
L3 L3 L3 L3
OL
R
M2 M1
CM1 M2 M1
CM2 M2 M1
CM3 M2 M1
CM4
FAN2
OUT
T2 T1 L1 L2 L3 T2 T1 L1 L2 L3 T2 T1 L1 L2 L3 T2 T1 L1 L2 L3
RLY2
CFM1 CFM2 CFM3 CFM4 CFM5 CFM6 HPS HIGH PRESSURE SWITCH
G
W1 W2
CR
V1 U2
C2 C1 C1 C2
Y2 Y1
CS CONTROL SWITCH
V2
FAN1
U1
OUT
MCB1 EFM
TK-1
TK-2
TK-3
TK-4
W2 W1 TK-5
TK-6
RLY3
TO CONTROL CIRCUIT TO CONTROL CIRCUIT TO CONTROL CIRCUIT TO CONTROL CIRCUIT MCB MINIATURE CIRCUIT BREAKER
CTB
FCS4
FCS3
FCS2
FCS1
RLY4
RLY5
OL OVERLOAD RELAY
HTR2
P-COM1
OL
CM COMPRESSOR MOTOR
INFAN HTR1
F1 F2
RLY8
C1 C2 C3 C4 C1 C2 C3 C4
TDR5 ECB ELECTRONIC CONTROL
HPS BOARD
HIGH PRESSURE SWITCH
1234
C11 C9
RLY9
C1 C2 C3 C4
PTB POWER TERMINAL CS
BLOCKCONTROL SWITCH
P1
TK-6
TK-5
TK-4
TK-3
TK-2
TK-1
CS1 CS2
ID
S1
LSV1
MCB2 LSV2 LEGEND FCS MCB
FAN CYCLE SWITCH MINIATURE CIRCUIT BREAKER
C12 C12
CCH1
CCH2
FCS2
OL OVERLOAD RELAY
TFR TRANSFORMER
LPS LOW PRESSURE SWITCH
L1
CFM5
CFM4
CFM3
CFM2
CFM1
CM2
CM1
EFM
HPS1 HPS2
SEC1
M M
N1
PRI1
C9 TDR5
CS C10CONTROL
C11 SWITCH
C8 C7 C6 C5 C4 C3 CR C2 C1
MPM MOTOR PROTECTOR MODULE
FCS1
FCS2
FCS3
FCS4
C CONTACTOR
OL
TFR
CCH CRANK CASE HEATER LPS1 LPS2
THERMOSTAT ( BY OTHERS ) CONTROL CIRCUIT F CONTROL FUSE
C R G Y1 Y2 Y3MCBY4 MINIATURE CIRCUIT BREAKER BLACK
CR CONTROL RELAY
10V
RED BLACK
EFM EVAPORATOR FAN MOTOR
220V
WHITE
TDR TIME DELAY RELAY
RED
24V
TK-2
TK-3
TK-4
TFR WHITE
COOLING STAGE - 2
COOLING STAGE - 3
COOLING STAGE - 4
EVAPORATOR FAN MOTOR
M2 M2 M2 M2 TFR TRANSFORMER
MPM1
MPM2
MPM3
MPM4
CM COMPRESSOR MOTOR M1 M1 M1 M1
TK THERMAL OVERLOAD PROTECTION
TDR5
C CONTACTOR C13 C11
CR2 CR3 CR4 CR5
TK-1
TK-2
TK-3
TK-4
TK-5
TK-6
F CONTROL FUSE
CCH1
CCH2
CCH3
CCH4
NOTE
* FOR 460V/3Ph/60Hz OR POWER SUPPLIES WITHOUT NEUTRAL, CXT OPTION
IS A MUST.
Dimensional Data
PACS Models: 61005C
10 10
[254] [254]
A1 A3
LEGEND
03 01- CONTROL PANEL
02- COMPRESSOR
03- CONDENSER FAN
04- CONDENSER COIL
AF.1 05- EVAPORATOR COIL
06- EVAPORATOR FAN
04 07- EVAPORATOR FAN MOTOR
08- 1" THK FLAT FILTER
ALL DIMENSIONS ARE IN INCHES [mm]
A1-A4 ARE LOADING POINTS
F=4.72 [120] FOR 1" THK. FLAT FILTER
F=5.7 [145] FOR 2" THK. FLAT FILTER
A2 A4 F
4-Ø0.79 [20] HOLES
FOR ANCHOR BOLTS DRAIN
2 x FPT 3/4 [19]
65.5 1 50.6
[1664] [25] [1285]
13
[38]
AIR OUT
1.5
07 06 [331]
11.38
[289]
01 S/A
08
[1347]
AIR IN
53.02
[1298]
51.1
R/A
[610]
02
24
[96]
3.8
POWER SOURCE
HOLES Ø 1 [25] 5
05
[128]
[70]
2.8
CONTROL CIRCUIT
ACCESS PANEL HOLES Ø 0.75 [19] ACCESS PANEL
FOR COMPRESSOR ON BOTH SIDES
Notes:
1. Drawings are contractually binding.
03 2. Before designing an installation,
consult the certified drawings, available on request.
3. For single unit and multiple unit installation or
unit is installing near to wall , please refer
the page No: 24 to 26
AF.2
AF.1
04
A2 A4 F
4-Ø0.79 [20] HOLES
FOR ANCHOR BOLTS DRAIN
2 x FPT 3/4 [19] 68
67.5 1
[1714] [25] [1727]
56
[1422]
[38]
07 06 [395]
[341]
13.4
01 S/A
08
[1347]
AIR IN
53.03
[1298]
51.1
R/A
[635]
25
02
[96]
3.8
POWER SOURCE
HOLES Ø 1 [25] 5
05
[70]
[128]
2.8
18
R-407C
R-410A
REFRIGERANT
Dimensional Data
PACS Models: 62015C
10 COMPRESSOR 10
[254] CIRCUIT "A"
A1 A3 [254]
LEGEND
01- CONTROL PANEL
04 02- COMPRESSOR
03- CONDENSER FAN
04- CONDENSER COIL
05- EVAPORATOR COIL
06- EVAPORATOR FAN
07- EVAPORATOR FAN MOTOR
08- 1" THK FLAT FILTER
01 ABF.1 ALL DIMENSIONS ARE IN INCHES [mm]
A1-A4 ARE LOADING POINTS
F=4.72 [120] FOR 1" THK. FLAT FILTER
F=5.7 [145] FOR 2" THK. FLAT FILTER
POWER CONTROL
SOURCE CIRCUIT
DETAIL AT `A' Notes:
03 1. Drawings are contractually binding.
2. Before designing an installation,
consult the certified drawings, available on request.
3. For single unit and multiple unit installation or
ABF.2 unit is installing near to wall , please refer
the page No:24 to 26
A2 COMPRESSOR A4
F
4-Ø0.79 [20] HOLES CIRCUIT "B"
FOR ANCHOR BOLTS DRAIN
2 x FPT 1 [25] 88
91 1 [2235]
[2311] [25] 64
[1625]
[38]
43.7
1.5
06 [1109]
07
13.43
S/A [341]
08
[1585]
62.42
[1548]
61
AIR IN
R/A
[914]
36
[96]
3.8
A
RIGGING HOLES ACCESS PANEL 5 05
[70]
2.76
10 COMPRESSOR 10
[254] CIRCUIT "A" A3 [254]
A1
04
01
ABF.1
03
ABF.2
A2 COMPRESSOR A4
F
4-Ø0.79 [20] HOLES CIRCUIT "B"
FOR ANCHOR BOLTS DRAIN
2 x FPT 1 [25]
100 1 88
[2540] [25] [2235]
78
[1982]
[38]
1.5
43.7
06 [1109]
AIR OUT
[341]
13.4
07 S/A
08
[1751]
68.93
[1578]
62.1
AIR IN
R/A
[904]
35.6
[126]
5
A 5
RIGGING HOLES ACCESS PANEL 05
[100]
3.94
Dimensional Data
PACS Models:62025C
10 COMPRESSOR 10
CIRCUIT "A"
[254] A1 A3 [254]
01
ABF.1
ABF.2
POWER CONTROL
CABLE ENTRY SOURCE CIRCUIT
DETAIL AT `A'
A2 A4 F
COMPRESSOR
4-Ø0.79 [20] HOLES CIRCUIT "B" DRAIN
FOR ANCHOR BOLTS 2 x FPT 1[25]
122 1 88
[3098] [25] [2235]
78
[1981]
52.3
[38]
06 1.5
03 07 [1328]
15.91
[404]
S/A
08
[1933]
76.11
[1900]
[1600]
74.8
63
[1080]
42.5
R/A
[126]
5
RIGGING HOLES 05 5
Ø0.79 [20] x 4Nos. 04 ACCESS PANEL
[100]
3.94
Notes:
1. Drawings are contractually binding. COMPRESSOR
2. Before designing an installation, CIRCUIT "A"
consult the certified drawings, available on request.
3. For single unit and multiple unit installation or
unit is installing near to wall , please refer F A2 A4
the page No: 24 to 26 DRAIN
2 x FPT 1 [25]
88 1 113.9
[2235] [25] [2892]
78
[1981]
61.89
[38]
1.5
[1572] 06 07 04 03
18.82
[478]
S/A
FILTERED
08 VENTILATION
BOTH SIDE
[2256]
[2208]
86.94
88.8
[1850]
72.8
DETACHABLE
[1257]
49.5
PLATE FOR
R/A CABLE ENTRY
RIGGING HOLES 05
Ø0.79[20] x 4Nos. ACCESS PANEL 02
[125]
[151]
5
4.9
ON BOTH SIDES
6
[128]
20
R-407C
R-410A
REFRIGERANT
Dimensional Data
PACS Models:62035C
10 10
[254] COMPRESSOR [254]
CIRCUIT "B"
A1 A3
LEGEND
1- CONTROL PANEL
2- COMPRESSOR
3- CONDENSER FAN
4- CONDENSER COIL
5- EVAPORATOR COIL
6- EVAPORATOR FAN
7- EVAPORATOR FAN MOTOR ABF.2
8- 1" THK FLAT FILTER ABF.1
ALL DIMENSIONS ARE IN INCHES [mm]
A1-A4 ARE LOADING POINTS
F=4.72 [120] FOR 1" THK. FLAT FILTER
F=5.7 [145] FOR 2" THK. FLAT FILTER
COMPRESSOR
Notes: CIRCUIT "A"
1. Drawings are contractually binding.
2. Before designing an installation,
consult the certified drawings, available on request. A2 A4
3. For single unit and multiple unit installation or
unit is installing near to wall , please refer F DRAIN Ø1 1/4 [32] x2Nos.
the page No: 24 to 26
88 1 113.9
[2235] [25] [2892]
78
[1981]
61.9
[38]
1.5
6
[1571]
3
[478]
18.8
FILTERED
VENTILATION
[2521]
99.24
BOTH SIDE
[2175]
[1850]
85.6
[1676]
72.8
66
DETACHABLE
PLATE FOR
CABLE ENTRY
RIGGING HOLES 8 5 7 2 4
[125]
BOTH SIDES
LEGEND
01- CONTROL PANEL
02- COMPRESSOR
03- CONDENSER FAN
04- CONDENSER COIL
05- EVAPORATOR COIL
06- EVAPORATOR FAN BF.2 AF.2
07- EVAPORATOR FAN MOTOR
BF.1 AF.1
08- 1" THK FLAT FILTER
ALL DIMENSIONS ARE IN INCHES [mm]
A1-A6 ARE LOADING POINTS
F=4.72 [120] FOR 1" THK. FLAT FILTER
F=5.7 [145] FOR 2" THK. FLAT FILTER
A2 A4 COMPRESSOR A6
F DRAIN Ø1 1/4 [32] x2Nos. CIRCUIT "A"
88.3
1 137.2
[2242]
78 [25] [3484]
[1981]
[38]
1.5
61.9 2
[1571]
7 5
[478]
18.8
FILTERED
VENTILATION
103.24
BOTH SIDE
[2622]
[2375]
93.5
[1829]
72
DETACHABLE
PLATE FOR
CABLE ENTRY
8 1 3 4
RIGGING HOLES ACCESS PANEL
[125]
BOTH SIDES
4.9
A4
20 Dimensional Data
A6 A8
10
L
COMPRESSOR COMPRESSOR
CIRCUIT "B" CIRCUIT "A"
7 5 6
A5 A7
A1 A3
LEGEND Notes:
1. Drawings are contractually binding.
1- EVAPORATOR COIL 2. Before designing an installation,
2- EVAPORATOR FAN consult the certified drawings, available on request.
3- FAN MOTOR 3. For single unit and multiple unit installation or
4- COMPRESSOR unit is installing near to wall , please refer
FILTERED the page No: 24 to 26
[2893]
5- CONDENSER COIL
113.9
A2 A4 A6 A8
4
ING HOLES
8[22]x 4 Nos.
STEEL WIRE
GUARD 10 20 10
[254] [508] [254]
88.27 2 L
[2242] [51]
[305]
G
12
9 2 7 5 6
1 LEGEND Notes:
1. Drawings are cont
1- EVAPORATOR COIL 2. Before designing a
S/A
J
[2893]
5- CONDENSER COIL
113.9
R/A VENTILATION
H
6- CONTROL PANEL
10 BOTH SIDE 7- CONDENSER FAN 70mm Pentapost
8- ANTI VIB. MOUNTS
9- WEATHER PROOF CANOPY 50mm Thick pane
DETACHABLE
PLATE FOR 10- FLEXIBLE CONNECTION ALL DIMENSION
CABLE ENTRY 11- 1"THK FLAT FILTER A1-A8 ARE LOAD
STEEL WIRE
GUARD
11
3 ACCESS 4
[150]
DIMENSIONS
MODEL PACS-
L H J G
188.5 113.9 35.35 35.35
62060C
[4788] [2893] [898] [898]
208.5 98.91 39.65 39.65
62070C Table 8
[5296] [2512] [1007] [1007]
Notes:
1. Drawings are contractually binding.
2. Before designing an installation,
consult the certified drawings, available on request. A2 A4 A6 A8 A10 A12 A14
3. For single unit and multiple unit installation or 10 COMPRESSOR
unit is installing near to wall , please refer
10
the page No: 24 to 26
[254] CIRCUIT "A" [254]
W 2 L
[51]
G 7 5
[152]
9 6
6
1
S/A
J
FILTERED
VENTILATION
BOTH SIDE
[2943]
115.9
D
R/A
H
10
DETACHABLE
2 PLATE FOR
CABLE ENTRY
11 3 4
ACCESS 8 RIGGING HOLES
[150]
5.91
DIMENSIONS
MODEL PACS-
L H W J G D
254.1 98.9 88 39.65 39.65 93
62080C
[6454] [2512] [2235] [1007] [1007] [2362]
258.1 107.9 100 44.49 44.49 102
62090C
[6556] [2741] [2540] [1130] [1130] [2591]
Table 9
22
R-407C
R-410A
REFRIGERANT
Loading Points
LOADING POINTS
PACSC UOM Total Weight
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12
lb. 197 199 159 166 721
61005
kg. 89 90 72 75 327
lb. 271 300 294 282 1147
61010
kg. 123 136 133 128 520
lb. 435 438 462 485 1820
62015
kg. 197 199 209 220 826
lb. 518 522 543 558 2141
62020
kg. 235 237 246 253 971
lb. 584 578 668 704 2534
62025
kg. 265 262 303 319 1149
lb. 676 686 713 765 2839
62030
kg. 306 311 323 347 1288
lb. 909 1026 924 833 3692
62035
kg. 412 466 419 378 1674
lb. 953 1035 1139 1052 787 842 5808
62040
kg. 432 469 516 477 357 382 2634
lb. 957 1038 1169 1077 789 845 5875
62045
kg. 434 471 530 489 358 383 2664
lb. 1082 1179 1091 1059 745 789 5943
62050
kg. 490 535 495 480 338 358 2695
lb. 885 894 977 873 1005 788 1053 855 7330
62060
kg. 401 405 443 396 456 358 477 388 3324
lb. 1063 965 973 851 1399 1182 1354 1170 8956
62070
kg. 482 437 441 386 634 536 614 531 4062
lb. 1091 1045 979 909 1286 1017 1154 1081 989 1099 10650
62080
kg. 495 474 444 412 583 461 523 490 449 499 4830
lb. 1163 807 1351 1395 738 550 1225 1094 1102 1166 978 1229 12800
62090
kg. 528 366 613 633 335 250 556 496 500 529 443 557 5805
Table 10
Sound Data
-12
SOUND POWER LEVEL in dB(A) ref 10 W
MODEL
SPECTRUM PER OCTAVE BAND
PACS C 63 125 250 500 1k 2k 4k 8k
61005 65.2 63.4 55.7 76.4 79.4 78.6 71.2 62.0
61010 66.2 64.4 56.7 77.4 80.4 79.7 71.9 63.6
62015 68.0 72.7 75.9 79.4 80.8 79.1 75.4 69.8
62020 68.0 72.7 75.9 79.4 80.8 81.2 76.4 69.9
62025 84.0 105.0 102.7 106.0 96.8 96.5 90.1 72.2
62030 84.0 105.0 102.7 106.0 96.8 96.6 90.1 72.4
62035 84.0 105.0 102.7 106.0 96.8 96.6 90.1 72.4
62040 87.0 108.0 105.7 109.0 99.8 99.6 93.1 75.5
62045 87.0 108.0 105.7 109.0 99.8 99.6 93.1 75.4
62050 87.0 108.0 105.7 109.0 99.8 99.6 93.1 75.3
62060 87.0 108.0 105.7 109.0 99.8 99.6 93.1 75.4
62070 88.8 109.8 107.5 110.8 101.6 101.4 95.0 78.6
62080 88.8 109.8 107.5 110.8 101.6 101.4 94.9 77.2
62090 88.8 109.8 107.5 110.8 101.6 101.4 94.9 77.3
Table 11
24
R-407C
R-410A
REFRIGERANT
2011 C A
64
[1626] DUCT B
2012 A 30
DUCT 30
B
[762]
30
B DUCT
[762]
2014 [762]
A
52 68 88
[1321] [1727] [2235] A
2016 PACS-61005C PACS-61005C
2018
2020 A
DUCTC
82 30
2025 DUCT 30
B B
76 [2083] 136 B A
[762]
[762]
30
[1930] [3454]
2027 [762]
PACS-61005C PACS-61005C
DUCT
82 148 A
2030 A
[2083] [3759]
DIMENSIONS ARE IN INCHES [MM]
Table 20
C
B
A 30
[762]
DUCT A
A
A DUCT DUCT
30 30
[762] B
B [762]
PACS-61010C PACS-61010C
DUCT DUCT
30 30
[762] B
B [762]
PACS-61010C PACS-61010C
UNIT CLEARENCE
C
A A
A A
[762]
30
A A C A
[762]
[762]
30
30
27
26
R-407C
d Space Requirements R-410A
REFRIGERANT
ation and Space Requirements
A
B
Location and Space Requirements
DUCT
ODEL
A B C
APMR
A
1005B C 42
B
A
46
MODEL
[1067] APMR
A B C [1168]
1006
MODELS : PACS-62040C, 62045C & 62050C
42 52 88
62035
DUCT
90
1008
[1067] [1321] 62045
[2235] 84 84
[2286]
60 62050
[2134] [2134]
1009
88 [1524] 62055 N/A
B
A
DUCT
1010 [2235] 62065 N/A
All dimensions are in inches[mm]
60
DIMENSIONS ARE IN INCHES [MM] Table 21
46
MODEL : PACS-62035C
ODEL
A B C DUCT
PMR
E IN INCHES [MM]
B
A
2011 SPACING FOR SERVICE
64
Table 19
[1626]
2012
SPACING FOR AIR FLOW 46
[1168]
2014
B 52 C 68 88 MODELS : PACS-62060C to 62090C
[1321] [1727] [2235]
2016
64
2018
[1626]
2020
82
2025
68 76 88 [2083] 136
A
[1727] [1930]
[2235] [3454]
2027
82 148
2030
[2083] [3759]
DIMENSIONS ARE IN INCHES [MM]
DUCT
Table 20
82
[2083] 136
[3454]
C
28
46
[1168]
GUIDE SPECIFICATIONS
GENERAL FEATURES EVAPORATOR FAN & MOTOR
Packaged air conditioners shall be composed of compressor(s), condenser Fans of evaporators shall be forward curved, double inlet double width (DIDW),
coil(s), evaporator coil, expansion valve(s), connecting piping, all necessary centrifugal type, statically & dynamically balanced, mounted on a single heavy
liquid line accessories and safety controls. duty shaft with permanently lubricated bearings and belt driven by V belt with
an adjustable variable pitch motor pulley.
Unit shall be factory assembled, internally wired, fully refrigerant charged with
R-407C and thoroughly tested before delivery. Units should be capable of Motor shall be Totally Enclosed Fan Cooled (TEFC), 4 poles, class-F insulated,
operate from 50°F (10°C) to 125.6°F (52°C) ambient temperature, and rated minimum IP55 protection & wired to unit control panel.
in accordance with AHRI 340/360 standards.
Suction line shall be insulated with ½” (12mm) wall thickness enclosed cell pipe
COMPRESSOR(S) insulation with maximum K factor 0.28 Btu.in /ft2 .h.°F. (0.040 W/mK).
FILTERS
EVAPORATOR COIL
Units shall be supplied with a range of filter sections with flat filter 1” or 2” thick,
Evaporator coil shall be constructed of seamless copper tubes 3/8” OD with 54% or 72% dust resistance, respectively, in accordance with ASHRAE
mechanically bonded to aluminium or copper corrugated cross-wave fins with 52.2 if so specified.
maximum 14 FPI (1.8mm) spacing.
2”thick flat filter can be supplied as standard option.
Coil consists of headers of seamless copper tubing, thermostatic expansion
valve(s) & multi-circuited distributor(s).
28
R-407C
R-410A
REFRIGERANT
GUIDE SPECIFICATIONS
CONTROL PANEL
The unit mounted control panel enclosure shall be fabricated out of heavy
gauge sheet steel in phosphatized powder coated baked finish. The
enclosure shall conform to IP54 as per guidelines in IEC 529.
The panel shall be factory wired in accordance with NEC 430 & 440, labelled
, tagged and features 220V / 240V controls and shall include the following
as a minimum.
CONTACT US
HEAD OFFICE
Email: sales@skmaircon.com
Email: info@skmaircon.com
Service Center
aftersales.skm@skmaircon.com