Es 775
Es 775
Es 775
Series 775
Double Check Valve Assemblies
Sizes: 12" 2" (15 50mm)
Series 775 Double Check Valve Assemblies provide protection of the potable water supply for non-health hazard cross-connections. Only those cross-connections identified by local inspection authorities as non-health hazard shall be allowed the use of an approved double check valve assembly.
775QT
Patent # 6,021,805
Features
Tubular copper body creates smooth flow path and low headloss External/internal electroless nickel-plated body acts as an oxygen barrier for corrosion resistance Threaded-in check modules eliminate the use of check retainers for lower pressure loss Shortest lay length in the industry allows for the use of smaller meter boxes and enclosures Bolted on, top entry stainless steel single access cover for ease of maintenance in meter box installations Modular check construction featuring non-reversible checks with captured springs for simplified servicing Check valve seats are replaceable without the use of special tools Top mounted test cocks provide easy access for testing
1st check assembly 2nd check assembly Top Mounted Test Cocks
Models
Suffix: S bronze strainer
Check Module Assembly The 775QT Series features a modular design which facilitates maintenance and assembly by retaining the spring load. Check modules are threaded into the valve adapter for leak proof operation.
Pressure Temperature
Temperature Range: 33F-180F (5C-82C) continuous Maximum Working Pressure: 175psi (12.06 bar)
IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES FOR LOCAL INSTALLATION REQUIREMENTS
Specifications
A double check valve assembly shall be installed at each noted location. The assembly shall consist of two threaded-in check modules with captured springs and silicone seat discs. Seats and seat discs shall be replaceable without the use of special tools. Service of all internal components shall be through a single access cover secured with stainless steel bolts. The assembly shall include two nickel-plated resilient seated isolation valves and four top mounted test cocks. The assembly shall have a electroless nickel-plated tubular copper body. The assembly shall meet the requirements of ASSE Standard 1015 and AWWA Standard C510. Assembly shall be Watts Regulator Company Series 775QT.
Now Available
WattsBox Insulated Enclosures.
For more information, send for literature ES-WB.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
USA: 815 Chestnut St., No. Andover, MA 01845-6098;www.wattsreg.com Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7;www.wattscanada.ca
Capacities
As compiled from documented Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California lab tests. *Typical maximum flow rate (7.5 feet/sec.)
12
kPa 69 55 41 28 14 0
psi 10 8 6 4 2 0 0 0 1 4 2 8 3 11 4 15
" (15mm)
kPa 165 138 110 83 55 28 psi 24 20 16 12 8 4 0 0 0 4 15 8 30 12 46 7.5 2.3 16 61
34
" (20mm)
5 19 7.5 2.3
6 23
7 27
8 30
10 38
12 46
13 49
14 53
20 76
24 91
28 106
32 122
36 137
1" (25mm)
kPa 110 96 83 69 55 41 28 14 0 psi 16 14 12 10 8 6 4 2 00 0 5 19 10 38 15 57 20 76 7.5 2.3 25 95 30 114 35 133 40 152 45 171 50 190 55 gpm 209 lpm fps mps
114" (32mm)
kPa 110 96 83 69 55 41 28 14 0 psi 16 14 12 10 8 6 4 2 0 00 10 38 20 76 30 114 7.5 2.3 kPa 124 110 96 83 69 55 41 28 14 0 100 380 110 418 120 456 130 140 494 532 150 gpm 570 lpm fps mps psi 18 16 14 12 10 8 6 4 2 0 0 0 20 76 40 152 60 228 40 152 50 190 60 228 70 266 80 304 90 342 100 380 110 418 120 gpm 456 lpm fps mps
112" (40mm)
kPa 207 172 138 103 69 34 0 psi 30 25 20 15 10 5 0 0 0 10 38 20 76 30 114 40 152 50 190 7.5 2.3 60 70 228 266 80 90 304 342
2" (50mm)
100 380
120 456
140 532
160 608
180 684
200 760
220 836
Dimensions Weights
As A
Standards
AWWA Std. C510
C
Bs
Approvals
D R
MODEL SIZE (DN) A in. mm in. mm in. B mm in. DIMENSIONS C mm in. D mm in. R mm in.
1015
B64.5
775QT 775QT 775QT 775QT 775QT 775QT 775QT-S 775QT-S 775QT-S 775QT-S 775QT-S 775QT-S ES-775 0515
12
15 20 25 32 40 50 15 20 25 32 40 50
228 228 286 390 390 460 304 317 406 504 514 606
92 92 114 152 152 152 143 143 167 152 152 152
258 258 3516 47/16 47/16 47/16 258 258 3516 47/16 47/16 47/16
3 3 31/4 312 4 5
76 76 83 89 102 102
158 158 17/8 31/4 31/4 31/4 158 158 2 31/4 31/4 31/4
41 41 47 82 82 82 41 41 51 82 82 82
1916 1916 158 234 234 234 1916 1916 158 234 234 234
40 40 41 69 69 69 40 40 41 69 69 69
4 1.8 4 1.8 6.31 2.9 17 7.7 17 7.7 26 11.8 5 2.3 5.75 2.6 8.31 3.8 21 9.5 22.5 10.2 33.75 15.3