Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    Concrete Beam Analysis

    Uploaded by

    Romani Noel S. Chavez Jr.
    This document discusses the key considerations for using externally bonded fiber-reinforced polymer (FRP) systems to strengthen concrete structures. It outlines that drawings and specifications should include details of the FRP system, installation procedures, material properties, surface preparation requirements, and quality control procedures. Submittals from the FRP manufacturer, installation contractor, or inspection agency may be required to validate qualifications, experience, and product information.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Concrete Beam Analysis

    Uploaded by

    Romani Noel S. Chavez Jr.
    65 views4 pages
    This document discusses the key considerations for using externally bonded fiber-reinforced polymer (FRP) systems to strengthen concrete structures. It outlines that drawings and specifications should include details of the FRP system, installation procedures, material properties, surface preparation requirements, and quality control procedures. Submittals from the FRP manufacturer, installation contractor, or inspection agency may be required to validate qualifications, experience, and product information.

    Original Description:

    analysis

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses the key considerations for using externally bonded fiber-reinforced polymer (FRP) systems to strengthen concrete structures. It outlines that drawings and specifications should include details of the FRP system, installation procedures, material properties, surface preparation requirements, and quality control procedures. Submittals from the FRP manufacturer, installation contractor, or inspection agency may be required to validate qualifications, experience, and product information.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    65 views4 pages

    Concrete Beam Analysis

    Uploaded by

    Romani Noel S. Chavez Jr.
    This document discusses the key considerations for using externally bonded fiber-reinforced polymer (FRP) systems to strengthen concrete structures. It outlines that drawings and specifications should include details of the FRP system, installation procedures, material properties, surface preparation requirements, and quality control procedures. Submittals from the FRP manufacturer, installation contractor, or inspection agency may be required to validate qualifications, experience, and product information.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    Reinforced Concrete Design

    FLEXURAL ANALYSIS OF CONCRETE BEAM

    Section
    bw = 200 mm
    h = 400 mm
    top bar, n = 0
    top bar, dia. = 0 mm
    bot bar, n = 2
    bot bar, dia. = 20 mm
    cover, d' = 40 mm
    d = 350

    Material
    f'c = 21 MPa
    β_1 = 0.85
    fy = 415 MPa
    E = 200,000 MPa

    Steel
    As = 628 mm2
    As1 = 628 mm2
     
    As2=As' = 0 mm2  bal  0.85 fc '  600 
    ρ_bal = 0.0216 ffy  600  y 

    ρ_max = 0.0162 analyze as… singly reinforced


    ρ_min = 0.0110
    ρ = 0.0090 steel yield

    Strain
    ε_y = 0.0021 0.003   y
     b
    ε_s = 0.0092 0.003   t

    Reduction Factor
    ϕ = 0.9000 tension controlled

    Case I singly reinforced. ρ<ρmax


    Case II doubly reinforced. ρ>ρbal, As do not yield
    Case III doubly reinforced. ρmax<ρ<ρbal, As yield

    Case = I
    a = 73.04 mm
    c = 85.93 mm

    fs = 415.00 MPa
    fs' = - MPa

    Cc = 260.75 kN
    Cs = - kN
    T = 260.75 kN

    Moment Capacity Case I


    Mu = 73.57 kN-m   a 
    Mu   C c  d   
      2 

    Case II & III


      a 
    Mu   C c  d    C s  d  d '  
      2 
    Reinforced Concrete Design
    Externally Bonded FRP Systems for Strengthening Concrete Structures

    Drawing and Specifications


    FRP System to be used
    Location of FRP system relative to existing structure
    Dimensions, no. of ply, sequence of installation
    ply
    laminate
    near-surface-mounted (NSM) bar
    Location of splices and lap length
    General notes specifiying
    design loads
    allowable strains
    Material properties
    FRP laminates
    concrete substrate
    Concrete surface preparation
    corner preparation
    groove dimensions for NSM bars
    maximum irregularity limitations
    Installation procedures
    surface temperature
    moisture limitations
    application time limits between successive plies
    Curing procedures of FRP systems
    Protective coatings and sealants, if required
    Shipping, storage and handling
    Quality control and inspection procedures
    In-place load testing installed in FRP system, if necessary

    Submitalls
    Specifications shall require the FRP system manufacturer
    installation contractor
    or inspection agency
    of the following:
    product information
    qualifications and experience

    You might also like