AMY 29-Oct-14 1 Check Date Rev. MMA 29-Oct-14 0 PROJECT TITLE: PRINCE MAJED PALACE DESIGN OF UNDERGROUND WATER TANK
Material Properties Geometrical Properties
3 Weight of reinforced concrete "γrc" 24 kN/m Thickness of bottom slab " ts " 400 mm Weight of soil "γsoil" 18 kN/m3 Thickness of wall " twall " 400 mm 3 Weight of water "γwater" 10 kN/m Hight of tank " h " 4.4 m Diameter of stirrups 10 mm Active pressure ' Ka' 0.2948 2 Strength of concrete " f 'c " 20 N/mm Active pressure ' Ka' For Water 1 2 Strength of steel "fy" 415 N/mm Clear cover to concrete 50 mm Angle of friction "j " 33 Degree Load Shrinkage &Temp. Steel Dia 10 mm Surcharge " q " 10 kN/m2
CASE 1 : SOIL
- Moment Earth Pressure Surcharge
1) Negative moment at abase :
− � ×� �� × � × × =37 kN.m � = +
Multimate = Mservic x 1.6 =60 kN.m
2) Negative moment Steel (vertical wall) :
Diameter of bar 16 mm PLEASE CHOOSE DIAMETER OF BAR
d =332 mm
�− � = =.541
% of seel (ρ) =.00132 ACI 350-01 section 14.3.2
% of seel (ρ) minmum =.00300 Minimum ratio of vertical reinforcement area to gross concrete area shall be 0.003
Area of steel = ρ x b x h =1200 mm2
No. of bar =( As/Abar) =6 Bar's Area of steel Provided =1206 mm2 Space Between Two Bar's " S " =167 mm Use T16 -150 mm c/c Provided " S " =150 mm 3)Crack widht check : Mservice = =37 kN.m dc =58 mm A= 2x dc x Space =17400 mm2 2 FS= (Mu/As x d) =93 N/mm W=0.011 x Fs x (dc +A)^1/3/1000 =.10272 mm OK ACI 350-01, R10.6.4 GERGELY LUTZ EXPRSSION Made Date Sheet AMY 29-Oct-14 1 Check Date Rev. MMA 29-Oct-14 0 PROJECT TITLE: PRINCE MAJED PALACE DESIGN OF UNDERGROUND WATER TANK
4) Positive moment in R.C wall :
+ � ×� �� × � × × ×� � � � = + =35 kN.m .
Multimate = Mservic x1.6 =56 kN.m
5) Positve moment Steel :
Diameter of bar 16 mm PLEASE CHOOSE DIAMETER OF BAR
d =342 mm
�− � = =.481
ACI 350-01 section 14.3.2
% of seel (ρ) =.00117 Minimum ratio of vertical reinforcement area to % of seel (ρ) minmum =.00300 gross concrete area shall be 0.003
Area of steel = ρ x b x h =1200
No. of bar =( As/Abar) =6 Area of steel Provided =1200 Space Between Two Bar's " S " =167 Provided " S " =150 Use T16 -150 mm c/c
6) Horizontal moment Steel :
Diameter of bar 12 mm PLEASE CHOOSE DIAMETER OF BAR
d =344 mm 2 ACI 350-01 section 14.3.2 Area of steel =0.003x b x h =1200 mm 2 Minimum ratio of horizontal reinforcement area For one face =600 mm to groos concrete area shall be 0.003 No. of bar =( As/Abar) =5 Bar's Space Between Two Bar's " S " =188 mm Provided " S " =175 mm Use T12 -175 mm c/c
7) Base slab :
Diameter of bar 20 mm PLEASE CHOOSE DIAMETER OF BAR
d =340 mm water pressure on the base slab and weight of the base Area of steel =0.0018x b x h =720 mm 2 will directly counteracted by the ground pressure .The pressure of water can be safely resisted by the soil No. of bar =( As/Abar) =2 Bar's under the floor . Provided " S " =436 mm Hence : The floor slab or base slab will only requier normal rienforcement ,so as the enable if to span over any possible weak pathes at ground .
Use T20 -200 mm c/c
Made Date Sheet AMY 29-Oct-14 1 Check Date Rev. MMA 29-Oct-14 0 PROJECT TITLE: PRINCE MAJED PALACE DESIGN OF UNDERGROUND WATER TANK
CASE 2 : WATER
1) Negative moment at abase :
− � × �� × � = =57 kN.m
2) Negative moment Steel (vertical wall) :
Ultimate Moment " Mu" = 1.6 x M service =91 kN.m
Diameter of bar 16 mm PLEASE CHOOSE DIAMETER OF BAR
d =342 mm �− � = =.824
% of seel (ρ) =.0020 ACI 350-01 section 14.3.2
% of seel (ρ) minmum =.0030 Minimum ratio of vertical reinforcement area to Area of steel = ρ x b x h =1200 mm 2 groos concrete area shall be 0.003
No. of bar =( As/Abar) =6 Bars
Area of steel Provided = NO.OF BAR x Area Of Bar =1200 mm2 Space Between Two Bar's " S " =167 mm Provided " S " =150 mm Use T16 -150 mm c/c
3)Crack widht check :
M service =57 kN.m
dc =58 mm 2 A= 2x dc x Space =21854 mm 2 FS= (Mu/As x d) =138 N/mm ACI 350-01, R10.6.4 GERGELY LUTZ W=0.011 x Fs x (dc +A)^1/3/1000 =.165 mm OK EXPRSSION
4) Positive moment in R.C wall :
− �� × � = =25 kN.m .
5) Horizontal moment Steel :
Diameter of bar 12 mm PLEASE CHOOSE DIAMETER OF BAR
d 344 mm 2 Area of steel (As) minmum =1200 mm ACI 350-01 section 14.3.2 2 For One Face =600 mm Minimum ratio of horizontal reinforcement area No .Of Bar For One face =5 Bars to groos concrete area shall be 0.003
Space Between Two Bar's " S " =188 mm
Provided " S " =175 mm Use T12 -175 mm c/c 6) Base slab :
Diameter of bar 20 mm PLEASE CHOOSE DIAMETER OF BAR
d =340 mm 2 Area of steel =0.0018x b x h =720 mm water pressure on the base slab and weight of the base No. of bar =( As/Abar) =2 Bar's will directly counteracted by the ground pressure .The pressure of water can be safely resisted by the soil Area of steel Provided =436 mm under the floor . Hence : The floor slab or base slab will only requier normal rienforcement ,so as the enable if to span over any possible weak pathes at ground .
Use T20 - 425 mm c/c Both 2- WAY
T12 -175 T16 -150
TWO LAYERS OF APPROVED
WATER PROOFING T16 -150 EMPTY WATER MEMBRANE WITH PROTECTION BOARD (TYP)
T20 -200
GRAVEL FILL (1"-6" SIZE) (TYP) 50 THK. BLINDING 50 THK. PROTECTION SCREED (TYP) 1000mm DEEP CONCRETE (TYP)
TWO LAYERS OF APPROVED
WATERPROOFING MEMBERANE (TYP)
EMPTY TANK Water Level
T16 -150
TWO LAYERS OF APPROVED
WATER PROOFING
T12 -175 WATER IN SIDE MEMBRANE WITH PROTECTION BOARD (TYP)
T20 -425
GRAVEL FILL (1"-6" SIZE) (TYP) 50 THK. BLINDING 50 THK. PROTECTION SCREED (TYP) 1000mm DEEP CONCRETE (TYP)
