GENERAL INFORMATION REMOVAL AND INSTALLATION

1. LAMP SPECIFICATIONS........................ 2 8310-01 HEADLAMP................................. 33

2. AUTOMATIC LIGHT SENSOR 8310-05 TURN SIGNAL LAMP BULB........ 35
SPECIFICATIONS................................... 3 8610-09 AUTO LIGHT AND
RAIN SENSOR MODULE............. 36
8310-10 FRONT FOG LAMP..................... 38
OVERVIEW AND OPERATING
8320-01 REAR COMBINATION LAMP....... 39
PROCESS 8320-16 HIGH MOUNTED STOP LAMP.... 41
8320-12 LICENSE PLATE LAMP............... 46
1. EXTERIOR LAMPS............................ 4
7850-05 SIDE REPEATER LAMP.............. 48
2. INTERIOR LAMPS............................ 12
0000-00 PUDDLE (APPROACH) LAMP...... 50
7770-20 OVERHEAD CONSOLE LAMP..... 52
8610-01 CENTER ROOM LAMP/
CONFIGURATION AND FUNCTION
LUGGAGE LAMP......................... 54
8610-04 GLOVE BOX LAMP...................... 56
8310-01 HEADLAMP................................. 16
8610-08 SUNVISOR LAMP........................ 57
8610-09 AUTO LIGHT AND
7115-15 DOOR COURTESY LAMP............ 58
RAIN SENSOR MODULE............. 18
8310-10 FRONT FOG LAMP..................... 19
8320-01 REAR COMBINATION LAMP...... 20
8320-16 HIGH MOUNTED STOP LAMP... 22
8320-12 LICENSE PLATE LAMP.............. 23
7850-05 SIDE REPEATER LAMP............. 24
0000-00 PUDDLE (APPROACH) LAMP..... 25
7770-20 OVERHEAD CONSOLE LAMP.... 26
8610-01 CENTER ROOM LAMP............... 28
8610-01 LUGGAGE LAMP........................ 29
8610-04 GLOVE BOX LAMP.................... 30
8610-08 SUNVISOR LAMP....................... 31
7115-15 DOOR COURTESY LAMP........... 32
07-2

1. LAMP SPECIFICATIONS
1) Exterior Lamps
Item Type Amount
Front lamp Headlamp (high beam/low beam)
Item BULB:
TypeH4 2 EA
Amount

Front lamp Headlamp

Turn signal(high
lamp beam/low beam) BULB:
BULB: H4
PY21W 2 EA
Turn signal
Position lamp
lamp BULB:
BULB:PY21W
W5W 2 EA
Position
Fog lamplamp FRT BULB:H27W/2
BULB: W5W 2 EA
Fog lamp RR BULB: H27W/2
H21W/2 2 EA

Rear lamp BULB: 12V27/8W (Korea) 2 EA

Stop lamp and tail lamp P21/5W (Other countries)
BULB: 12V27W (Korea) 2 EA
Turn signal lamp P21W (Other countries)
BULB: 12V27W (Korea) 2 EA
Backup lamp P21W (Other countries)
Stop lamp/Rear fog lamp BULB: 12V27W (Korea) 2 EA
(Other countries) P21W (Other countries)
High-mounted stop lamp LED
(Without spoiler) 12 EA
(With spoiler) 24 EA
License plate lamp BULB: W5W 2 EA

Side lamp Side repeater lamp LED 5 EA

Puddle lamp LED 2 EA

2) Interior Lamps
Item Type Amount
Front room lamp BULB (10W-FESTOON) 2 EA
Center room lamp BULB (10W-FESTOON) 1 EA
Luggage lamp BULB (10W-FESTOON) 1 EA
Sun visor lamp BULB (5W-FESTOON) 1 EA
Glove box lamp BULB (5W-FESTOON) 1 EA
Door courtesy lamp BULB (5W-WEDGGE) 1 EA
 8310-00 07-3

2. AUTOMATIC LIGHT SENSOR SPECIFICATIONS

Pin No. Specification
Operating voltage 9 V to 16 V
Load Max. 200 mA (relay load)
Operating temperature -30℃ to 85℃
Storage temperature -40℃ to ±120℃
Mounting location Top center of inner side of windshield glass

▶ LED
- The LED stands for "Light Emitting Diode" or "Luminescent Diode." LED is a semiconductor
diode that emits incoherent narrow-spectrum light when electrically biased in the forward
direction of the p-n junction, as in the common LED circuit. In short, it is an element that
converts electric signals into light signals. Yellow, blue, red and white LEDs are currently
available.
- The followings are the advantages of LED.
It is not glaring and doesn't have short circuit unlike the conventional lamps.
It is semi-permanent and doesn't generate heat.
Its power consumption is much lower than those of conventional bulbs.

▶ Luminous Intensity
- Luminous intensity is a measure for the amount of light which passes through the unit area
per time unit. The SI unit of luminous intensity is the candela (cd), an SI base unit.

▶ Luminance
- Luminance describes the amount of light that passes through or is emitted from a particular
area, and falls within a given solid angle. It is measured in sb or nt.

▶ Intensity of illumination
- This indicates the amount of light reaching a given area. Measuring unit is lux (lx) and it is not
directly proportional to the brightness of the area as the reflection rate is not included.
07-4

1. EXTERIOR LAMP
1) Layout
Headlamp

Turn signal lamp

High-beam
/low-beam

Position lamp

Front fog lamp

Puddle (approach) lamp Side repeater lamp

 8310-00 07-5

Rear combination lamp

Stop lamp and tail lamp

Turn signal lamp

Backup lamp

Rear fog lamp

License plate lamp

High mounted stop lamp

Vehicle with spoiler Vehicle without

spoiler
07-6

2) Operation
(1) Headlamp

High-beam/low-beam

Most of the functions of the headlamp is controlled by the multifunction switch. The functions
performed by REKES or SMART key are controlled by the BCM.
The BCM controls the headlamp and tail lamp by using the data sent through the LIN
communication from the automatic light sensor when the multifunction switch is in AUTO position.

▶ Control by BCM
1. Escort control
- When pressing the door lock button on the REKES or smart key remote control for more than 2
seconds in the theft deterrent mode, the BCM activates the headlamp relay for 20 seconds.
Activating the escort function again during its operation will operate for another 20 seconds
one time only for BCM with REKES.
- The escort function stops as soon as the door lock is operated or igntion switch is turned to
ON position during escort operation. For BCM with REKES, the function also stops when the
key insertion is detected.

2. Coming home lighting control

- The headlamp is illuminated for 30 sec. when the ignition switch is turned on and then off with
the multifunction switch in ON or AUTO.
- The headlamp is turned off right after the ignition is turned on. And when all the doors
(including tailgate) are closed the headlamp is illuminated for 30 sec.; and all the doors are
open, the headlamp is illuminated for 3 minutes.
- This function can be deactivated or activated with a diagnostic equipment.
 8310-00 07-7

(2) Fog lamp

▶ Front

Front fog lamp

▶ Rear
(EU only)
Rear fog light

The front fog lamp is operated with the fog lamp switch only when the tail lamp is lit.
The rear fog lamp is not installed to Korean models and this lamp is turned on by the BCM when
the rear fog lamp switch is operated after the headlamp is illuminated, and it goes off when the
rear fog lamp switch is operated again.
When the ignition switch or tail lamp switch is turned off, the front fog lamp goes off. When the
ignition switch or headlamp switch is turned off, the rear fog lamp goes off.

For Korean models, stop lamps are installed instead of rear fog lamps.
07-8

(3) Tail lamp

▶ Front

Tail lamp

▶ Rear

Tail lamp

The tail lamp is operated by the BCM when the BCM receives a signal from the multifunction switch.

▶ Tail lamp warning

1. The buzzer sounds for 10 seconds with the interval of 0.02 s ON and 1.38 s OFF when opening
the driver door with the key removed (without SKM)/with IGN OFF or ACC (with SKM) and tail
lamp ON.
2. The buzzer stops its operation when turning off the tail lamp or closing the driver door during
buzzer operation. The buzzer stays ON when turning the tail lamp on again after turning it off
during buzzer operation.

▶ Tail lamp auto turn-off

- When opening and closing the driver door after turning off the ignition with the tail lamp ON, the
tail lamps go off automatically.
- The tail lamps come on again when inserting the ignition key (without SKM) and turning on the
ignition (with SKM) after tail lamp auto OFF.
- The tail lamp should not go off when turning on the tail lamp switch with the ignition key
removed (without SKM) and with power off or ACC ON (with SKM).
 8310-00 07-9

(4) Turn signal lamp / Side repeater lamp

▶ Front

Turn signal lamp

▶ Rear

Turn signal lamp

The turn signal lamp is operated by the BCM when the BCM receives a signal from the
multifunction switch. The BCM cycles the turn signal lamp and buzzer (ON/OFF) 75 times per
minute.
The turn signal lamps are operational only when IGN1 is ON.
If the turn signal lamp fails while it is illuminated, the BCM cycles the lamp and buzzer 100 times
per minute.
The BCM determines that there is an open circuit if the load is 3.0 A or less, and there is a short
circuit if the load is 7.0 A or more.
When turning ON the turn signal switch, the lamp blinks 3 times by the BCM. When turning OFF
the switch during the operation, the turn signal lamp blinks 3 times and goes off.
When turning OFF and then immediately ON the turn signal switch during auto blinking operation
of 3 times, the turn signal lamp blinks additional 3 times.
If one of the turn signal lamp is flashing and the other lamp switch is turned on, the lamp for the
activated switch flashes.
07-10

(5) Auto light (LIN)

Auto light switch Automatic light sensor unit

The auto light sensor unit is installed to the back side of the ECM mirror located upper center of
the windshield, and detects the illuminance change. The BCM communicates with the auto light
sensor when the ignition is turned on, and turns on or off the tail lamp and headlamp
automatically according to the signals from the sensor when the multifunction switch is set to
AUTO light.
The BCM communicates with the rain sensor even if the multifunction switch is in tail lamp.

(6) Side repeater lamp

Side repeater lamp

The side repeater lamp is operated by the BCM when the BCM receives a signal from the
multifunction switch.
The BCM cycles the side repeater lamp and buzzer (ON/OFF) 75 times per minute.
The side repeater lamp operates only when IGN1 is ON.
If the side repeater lamp fails while it is illuminated, the BCM cycles the lamp and buzzer 100 times
per minute.
The lamp automatically flashes 3 times when the multifunction switch is turned on. If the switch is
turned off
during this operation, the lamp flashes 3 times and then goes off.
If the switch is turned off and then on during the 3 times of automatic flashing, the lamp flashes 3
more times.
 8310-00 07-11

(7) Puddle (approach) lamp

Approach (puddle) lamp

▶ Lamp control for models without SKM

1. Approach lamp ON
- When receiving the UNLOCK signal in the theft deterrent mode, the approach lamps come
ON for 30 seconds.
- When turning the ignition switch to OFF from ON position and opening the driver door, the
approach lamps come ON.
2. Approach lamp OFF
- When receiving the door lock signal with the approach lamps ON, the lamps go OFF
(reactivation of theft deterrent mode).
- When turning the ignition switch to ON position with the approach lamps ON, the lamps go
OFF.
- The approach lamps go OFF after 30 seconds.
▶ Lamp control for models with SKM
1. Approach lamp ON
- When turning the ignition switch to OFF from ON position and opening the driver door, the
approach lamps come ON.
- When receiving the UNLOCK signal from the smart key remote control or outside door
handle switch signal in the theft deterrent mode, the approach lamps come ON for 30
seconds.
- When receiving the AUTO approach signal in the theft deterrent mode, the approach lamps
come ON for 30 seconds.
2. Approach lamp OFF
- When receiving the door lock signal from the smart key remote control or outside door
handle switch signal with the approach lamps ON, the lamps go OFF (reactivation of theft
deterrent mode).
- When turning the ignition switch to ON position with the approach lamps ON, the lamps go
OFF.
- The approach lamps go OFF after 30 seconds.
07-12

2. INTERIOR LAMPS
1) Layout
Glove box lamp

Front room lamp Sun visor lamp

 8310-00 07-13

Center room lamp

Luggage lamp Door courtesy lamp

07-14

2) Operation
(1) Front room lamp/Center room lamp
Front room lamp Center room lamp

Operating the front room lamp and center room lamp switches illuminates the driver/passenger
side lamps and center room lamp.

▶ Room lamp control by door coupled room lamp operation

1. If a door except the tailgate is opened after the ignition is turned off, provided that door
coupled front room lamp switch is pressed, the front room lamp and center room lamp are
illuminated for 2 sec. and then fade out for 3 sec.
If a door except the tailgate is opened and then closed while the room lamp is fading out, the
room lamp is illuminated for 2 sec. and then fades out for 3 sec. If the ignition is turned on, the
room lamp goes off immediately.
2. The front room lamp and center room lamp are illuminated for 30 sec. when the door is
unlocked by the REKES or passive door UNLOCK function with IGN OFF and the ignition key
removed. If the REKES or passive door UNLOCK signal is received again, the room lamps are
illuminated for another 30 sec.
3. The room lamp goes off immediately when the REKES or passive door LOCK signal is received
or the ignition switch is turned to ON position.
4. If the room lamp is turned on after the ignition key is removed (door open or room lamp switch
is pressed), it is turned off after 10 minutes by the BCM.
5. When the door open state is changed or the ignition is turned on after the room lamp has been
turned off automatically, the battery saver feature is reset.
 8310-00 07-15

(2) Luggage lamp

Luggage lamp The luggage lamp is turned on when the tailgate is
opened with the switch operated.
This lamp is not controlled by the BCM, unlike the
front/center room lamp.

(3) Other interior lamps

Glove box lamp The glove box lamp comes on when the glove box is
opened after the tail lamp is illuminated.

Sun visor lamp The sunvisor lamp comes on when the sunvisor vanity
mirror cover is opened.

Courtesy lamp The door courtesy lamp comes on when the driver's
door or passenger's door is opened.
07-16

1) Mounting Location

Headlamp bulb Position lamp bulb Turn signal lamp bulb

- BULB (H4 12V 60W) - BULB (W5W) - BULB (PY21W)

▶ Location and name of adjusting screw

LH/RH
adjusting switch

UP/DWN
adjusting switch

1. Headlamp connector
2. Position lamp connector
3. Turn signal lamp connector
 8310-01 07-17

2) Connector Pin Description

▶ Headlamp connector

Pin No. Function

1 Headlamp power (High beam)
2 Headlamp power (Low beam)
3 Ground
4 -

▶ Turn signal lamp connector

Pin No. Function

1 Ground
2 Power

▶ Position lamp connector

Pin No. Function

1 Ground
2 Power
07-18

1) Mounting Location

2) Connector Pin Description

Pin No. Function
1 LIN communication
2 -
3 Ground (-)
4 IGN1 (+)
 8310-10 07-19

1) Mounting Location

- Turning the front fog lamp switch on turns on the fog lamp with IGN ON and tail lamp ON.

▶ Adjusting screw

1. UP/DWN adjusting screw

Up Down

2) Connector Pin Description

Pin No. Function
1 Ground
2 Fog lamp power
07-20

1) Mounting Location

Stop/Tail lamp Turn signal lamp

- BULB : 12V27/8W (Korea), - BULB: 12V27W AMBER (Korea),

P21/5W (Other countries) P21W (Other countries)

Backup lamp Stop/Rear fog lamp

- BULB: 12V27W (Korea), - BULB: 12V27W (Korea),

P21W (Other countries) P21W (Other countries)
 8320-01 07-21

▶ Back side of tail lamp

137

2) Connector Functions
Pin No. Function
1 Stop lamp power
2 Tail lamp power
3 Backup lamp
4 Turn signal lamp
5 Ground
Korea (-)
6
Other countries (Rear fog lamp)
07-22

1) Mounting Location

For vehicles with rear spoiler

High mounted stop lamp

For vehicles without rear spoiler

High mounted stop lamp

2) Connector Pin Description

Pin No. Function
1 Stop lamp ground
2 Stop lamp power
 8320-12 07-23

1) Mounting Location

License plate lamp

2) Connector Pin Description

Pin No. Function
1 License plate lamp ground
2 Tail lamp power
07-24

1) Mounting Location

Side repeater lamp

2) Connector Pin Description

Pin No. Function
Ground
1
(outside rearview mirror connector
Pin no. 10)

Turn signal lamp power

2 (outside rearview mirror connector
Pin no. 9)
 0000-00 07-25

1) Mounting Location

Puddle (approach) lamp

2) Connector Pin Description

Pin No. Function
Ground
1
(outside rearview mirror
connector Pin no. 8)

B+
2 (outside rearview mirror
connector Pin no. 2)
07-26

1) Mounting Location

Front room lamp

2) Features
- The front room lamp is controlled by the BCM.
- The front room lamp comes on when opening the driver or passenger door. (door coupled
operation switch ON)
- After the driver's/passenger's door is closed, the front room lamp continues to illuminate for
2 sec. and then fades out for 3 sec, with the door coupled switch on.
- The front room lamp turns on/off depending on the operation of the front room lamp
ON/OFF switch (spot switch).
 7770-20 07-27

▶ Structure

Front room lamp

Front room lamp connector

Door coupled operation switch

Sunroof connector
Front room lamp switch

3) Connector Pin Description

Pin No. Function
1 Ground for BCM
2 Ground for BCM
3 B+
Ground for BCM
4 (Ground the center room lamp
when door coupled operation is
ON)
07-28

1) Mounting Location

Center room lamp

2) Connector Pin Description

Pin No. Function
1 B+
2 ON
3 OFF
 8610-01 07-29

1) Mounting Location

Luggage lamp

2) Connector Pin Description

Pin No. Function
1 Tailgate switch ground
(BCM A19)

2 B+
3 -
07-30

1) Mounting Location

Glove box lamp

2) Connector Pin Description

Pin No. Function
1 Tail lamp power
2 Glove box switch (ground)
 8610-08 07-31

1) Mounting Location

Sun visor lamp

2) Connector Pin Description

Pin No. Function
1 B+
Sunvisor lamp switch
2
(ground)
07-32

1) Mounting Location

Courtesy lamp

2) Connector Pin Description

Pin No. Function
1 Door switch (ground)
2 B+
 8310-01 07-33

- Remove the front bumper. Refer to Front Bumper of BODY.

Headlamp

1. Unscrew the two mounting bolts (10 mm) and one mounting screw on the upper side of the
headlamp and one mounting bolt (10 mm) on the lower side of the lamp after removing the
front bumper.

Upper side Lower side

07-34

2. Disconnect the headlamp connectors (A),

(B) and (C).

Headlamp connector

Position lamp connector

Turn signal lamp connector

Make sure that the painted surface and

the wirings are not damaged when
removing.

3. Remove the headlamp.

4. Installation is in the reverse order of

removal.
 8310-05 07-35

- Remove the front wheel house cover.

LH/RH
adjusting switch

UP/DWN
adjusting switch

1. Headlamp connector
2. Position lamp connector
3. Turn signal lamp connector

1. Rotate the turn signal lamp bulb connector

in the direction of the arrow to remove it.

2. Replace the turn signal lamp bulb.

07-36

Automatic light and rain sensor

1. Remove the rain sensor cover by inserting

a small flat-blade screwdriver into the
service holes on both sides as shown in
the figure.

Otherwise, the cover or rain sensor

components could be damaged.

2. Disconnect the connector connected to the

rain sensor unit on the windshield glass.
 8610-09 07-37

3. Pry off the upper and lower rain sensor covers

by inserting a small flat-blade screwdriver into
service holes at both sides.

Pry off the auto light unit cover through

the service holes on both sides to remove
the cover. Otherwise, the cover or
components could be damaged.

4. Separate it from the windshield glass.

5. Installation is in the reverse order of

removal.
07-38

- Remove the front bumper. Refer to Front Bumper of BODY.

Front fog lamp

1. Disconnect the front fog lamp connector.

2. Unscrew the 4 mounting screws to remove

the front fog lamp from the bumper.

3. Installation is in the reverse order of

removal.
 8320-01 07-39

Tail lamp

1. Open the tailgate and unscrew the two

mounting screws for the rear combination
lamp.

2. Pull out the lamp from the back of the

vehicle.
07-40

3. Disconnect the connector to remove the

rear combination lamp.

Make sure that the painted surface and the

wirings are not damaged when removing.

4. Installation is in the reverse order of

removal.
 8320-16 07-41

▶ For vehicles with rear spoiler

High mounted stop lamp

1. Remove the upper trim of the tailgate.

2. Disconnect the high mounted stop lamp

connector and washer nozzle hose.
Rear washer nozzle
hose
Make sure that the washer fluid does not
come into contact with components when
High mounted stop disconnecting the washer nozzle hose.
lamp connector
07-42

3. Remove the 4 rubber caps.

Rubber caps

4. Remove the 4 mounting nuts (10 mm) for

the rear spoiler assembly.

Mounting nuts

5. Disasemble rear spoiler.

Make sure that the painted surface and the

wirings are not damaged when removing.

6. Remove the high mounted cover from the

rear spoiler.
 8320-16 07-43

7. Unscrew the 3 mounting screws for the high

mounted stop lamp.

8. Remove the high mounted stop lamp

from the rear spoiler.

9. Installation is in the reverse order of

removal.

- The nozzle hose should be fitted to the

stop lamp groove when assembling.
07-44

▶ For vehicles without rear spoiler

High mounted stop lamp

1. Remove the upper trim of the tailgate.

2. Disconnect the high mounted stop lamp

connector and nozzle hose.
Rear washer nozzle
hose
Make sure that the washer fluid does not
come into contact with components when
High mounted stop disconnecting the washer nozzle hose.
lamp connector
 8320-16 07-45

3. Remove the two rubber caps.

4. Remove the two mounting nuts (10 mm).

5. Remove the high mounted stop lamp.

Make sure that the painted surface and

the wirings are not damaged when
removing.

6. Installation is in the reverse order of

removal.

- The nozzle hose should be fitted to the

stop lamp groove when assembling.
07-46

- Disconnect the negative cable from the battery.

Secured with hooks

License plate lamp

Secured with clips

1. Disengage the inner side of the license

plate lamp carefully from the tailgate rear
garnish.

2. Move the license plate lamp to the right

side to remove it.
3. Remove the bulb (B) from the removed
lamp (A).
 8320-12 07-47

4. When installing the license plate lamp,

you should attach the lamp with the hook
(1) first and then engage it with the clip
(2) with the bulb fitted.

Otherwise, the lamp could be damaged.

07-48

- Disconnect the negative cable from the battery.

Side repeater lamp

1. Pry out the outside rearview mirror with a

flat bladed screwdriver.

Make sure that it is not damaged especially

in cold weather.

2. Disconnect the heated wire of the outside

rearview mirror to remove the outside
rearview mirror.
 7850-05 07-49

3. Remove the mounting screw on the outside

rearview mirror.

4. Disconnect the side repeater lamp

connector (A) from the mirror to remove the
lamp (B).

5. Installation is in the reverse order of

removal.
07-50

Puddle lamp

1. Pry out the outside rearview mirror with a

flat bladed screwdriver.

Make sure that it is not damaged especially

in cold weather.

2. Disconnect the heated wire (A) of the

outside rearview mirror to remove the
outside rearview mirror.
 0000-00 07-51

3. Remove the outside rearview mirror cover.

4. Separate the puddle lamp from the outside

rearview mirror housing with a flat bladed
screwdriver.

5. Disconnect the puddle lamp connector (A)

and remove the lamp.

6. Installation is in the reverse order of

removal.
07-52

- Disconnect the negative battery cable.

Overhead console lamp bulb

1. Unscrew the two mounting bolts

(A, 10 mm).

2. Disengage the overhead console clip

sections (B).
 7770-20 07-53

Overhead console clip (B)

Clip
section

3. Disconnect the front room lamp connector

(A) and the sunroof switch connector (2) to
remove the overhead console.

4. Installation is in the reverse order of

removal.
07-54

Center room/luggage lamp bulb

1. Remove the lamp cover by prying it out

using a flat-bladed screwdriver.

2. Unscrew the two mounting nuts (10 mm).

 8610-01 07-55

3. Disconnect the connector (A) and remove

the center room lamp assembly.

4. Installation is in the reverse order of

removal.
07-56

Glove box lamp bulb

1. Open the glove box and remove the glove

box lamp assembly by prying out using a
flat-bladed screwdriver.

Be careful not to scratch when removing.

2. Disconnect the connector to remove the

glove box lamp.

3. Installation is in the reverse order of

removal.
 8610-08 07-57

Sunvisor lamp bulb

950

1. Remove the sunvisor lamp assembly from

the roof trim with a flat bladed screwdriver.

2. Disconnect the connector (A) to remove

the sunvisor lamp.

3. Installation is in the reverse order of

removal.
07-58

Courtesy lamp bulb

1. Remove the door courtesy lamp cover

from the door panel (inner trim) by prying it
out using a flat-bladed screwdriver.

2. Remove the door courtesy lamp bulb

from the door panel.

The courtesy lamp is integrated with the

door trim, so it must be removed or
replaced as a unit.

3. Installation is in the reverse order of

removal.