Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Body Interior PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 88

7110-00/7115-00/7115-01/7120-00/7210-00/7215-00/7215-01/

7220-00/7321-00/7330-00/7330-01/7330-11/7610-00/7610-01/
7610-10/7610-16/7610-17/7610-27/7630-00/7630-01/7710-00/
7730-00/7730-01/7730-04/7730-11/7730-22/7730-23/7752-00/
7770-00/7770-01/7792-00/7870-09/

GENERAL INFORMATION REMOVAL AND INSTALLATION

1. MAJOR CHANGES............................ 3 7610-01 INSTRUMENT PANEL................. 25


7610-17 GLOVE BOX ASSEMBLY............ 39
7610-27 CLUSTER FASCIA PANEL
CONFIGURATION AND FUNCTION ASSEMBLY................................. 42
7870-09 SIDE FASCIA PANEL (LH)
7110-00 FRONT DOOR OPENING ASSEMBLY................................. 45
SYSTEM...................................... 4 7610-16 CENTER FASCIA PANEL
7115-00 FRONT DOOR TRIM.................... 6 ASSEMBLY................................. 48
7120-00 FRONT WINDOW LIFTER............. 7 7610-10 SIDE FASCIA PANEL (RH)
7210-00 REAR DOOR OPENING ASSEMBLY................................. 52
SYSTEM...................................... 8 7630-01 FRONT CONSOLE (2-TRAY)....... 54
7215-00 REAR DOOR TRIM...................... 10 7630-01 FRONT CONSOLE (1-TRAY)....... 58
7220-00 REAR WINDOW LIFTER.............. 11 7730-22 DOOR SCUFF FRONT TRIM
7321-00 REAR END TRIM......................... 12 ASSEMBLY................................. 61
7330-00 HEAD LINING.............................. 13 7730-23 DOOR SCUFF REAR TRIM
7610-00 INSTRUMENT PANEL................. 14 ASSEMBLY................................. 62
7630-00 FRONT CONSOLE....................... 16 7730-01 A-PILLAR TRIM ASSEMBLY....... 63
7710-00 FLOOR CARPET......................... 18 7730-04 B-PILLAR UPPER TRIM
7730-00 PILLAR TRIM.............................. 20 ASSEMBLY................................. 65
7752-00 LUGGAGE PARTS..................... 22
7770-00 SUN SHADE AND INSIDE
MIRROR...................................... 23
7792-00 ANTI-VIBRATION PAD................ 24
REMOVAL AND INSTALLATION

7730-11 QUARTER UPPER TRIM


ASSEMBLY.................................. 67
7770-01 SUNVISOR ASSEMBLY............... 71
7330-11 GRIP ASSEMBLY........................ 73
7330-01 HEAD LINING ASSEMBLY........... 74
7115-01 FRONT DOOR TRIM
ASSEMBLY.................................. 77
7215-01 REAR DOOR TRIM ASSEMBLY... 81
7321-00 REAR END TRIM.......................... 85
5110-01 05-3

1. MAJOR CHANGES
1) Luggage Lid
Front view
Previous Current

Latch type Band type

Rear view
Previous Current

No anchor system for keeping lid open Retaining hook


05-4
7110-00 05-5

1. Front door latch and cable assembly


2. Door latch mounting bolt
4. Front door inside handle cable assembly
5. Front door safety lock knob cable assembly
7. Cable holder
8. Door striker assembly
9. Door striker shim
10.Door striker mounting screw
11.Front door outside handle assembly
14.Nut
15.Front door outside handle rod
21.Front door checker assembly
22.Bolt
23.DR OVERSLAM BUMPER
24.Front door inside handle assembly
25.Door inside handle cap
26.Screw
05-6

1. Front door trim assembly 15.Door courtesy lamp assembly


2. Front door trim weather strip 16.Bulb
4. Armrest front door trim panel assembly 20.Front door pull handle mounting bracket
5. Front door bezel assembly
7. Door courtesy front reflector 24.Grommet
8. Door courtesy front lens 25.Screw
11.clip 26.Rivet screw
30.Cover front pull handle
7120-00 05-7

1. Front door power window front regulator


2. Power window front motor assembly
6. Front door window glass run
7. Nut
05-8
7210-00 05-9

1. Rear door rear latch and cable assembly


2. Door latch mounting bolt
4. Rear door inside handle rear cable assembly
5. Rear door safety lock knob cable assembly
7. Cable holder
8. Door striker assembly
9. Door striker shim
10.Door striker mounting screw
11.Rear door outside handle assembly
14.Nut
15.Rear door outside handle rod
20.Door child safety label
21.Rear door checker assembly
22.Flange bolt
23.DR OVERSLAM Bumper
24.Rear door inside handle assembly
25.Door inside handle cap
26.Screw
05-10

1. Rear door trim assembly 20.Rear door pull handle mounting


2. Rear door trim weather strip bracket assembly
4. Armrest rear door trim panel assembly 24.Grommet
5. Rear door bezel 25.Screw
11.clip 26.Rivet screw
30.Cover rear pull handle
7220-00 05-11

1. Rear door power window rear regulator


2. Power window front motor assembly
4. Nut
6. Rear door window glass run
7. Rear door glass guide rail assembly
05-12

1. Tailgate lower trim assembly 15.Tailgate upper trim assembly


2. Latch cover 16.Tailgate side trim assembly
3. clip 17.Tailgate side trim assembly
4. clip 18.Trim mounting clip
12.Grommet 20.Tailgate lower grip
13.Screw 21.Tailgate handle cap
14.Rivet screw 23.Screw
7330-00 05-13

1. Head lining assembly 8. Coat hook assembly


2. Head lining assembly 10.Front grip assembly
3. Roof No. 2 insulation 11.Rear grip assembly
4. Roof No. 3 insulation 20.Grip mounting front bracket assembly
5. Roof No. 4 insulation 21.Grip mounting rear bracket assembly
7. Tree type fastener 23.Screw
05-14
7610-00 05-15

1. Crash pad assembly


2. Auto light blanking cover
3. Crash pad upper tray assembly
4. Crash pad guide
5. Crash pad reinforcement bracket assembly
6. Crash pad reinforcement bracket
7. Audio and video bracket
9. Side fascia panel assembly
10.Side fascia panel assembly
11.Grocery hook assembly
16.Center fascia panel assembly
17.Glove box assembly
18.Glove box housing assembly
19.Center fascia molding assembly
20.Side fascia molding assembly
21.Side fascia molding assembly
22.Center fascia lower panel
23.Side fascia panel
24.Side fascia panel
25.Center fascia panel
27.Cluster fascia panel assembly
30.Side air vent louver assembly
31.Side air vent louver assembly
32.Center air vent louver assembly
33.Center air vent louver assembly
35.Center fascia lower tray assembly
39.Shroud upper panel
40.Shroud lower panel assembly
41.Lower main panel assembly
42.Crash pad side cover assembly
43.Knee bolster bracket
44.Nut
45.Screw
46.Screw
05-16
7630-00 05-17

1. Console assembly
3. Center cup holder assembly
4. Console main rear upper bracket assembly
5. Armrest assembly
6. Console rear fascia assembly
7. Boot cover assembly
9. Console main upper fascia assembly
10.Cup holder housing assembly
11.Main upper tray
12.Cup holder upper bezel
13.Armrest hinge cover
15.Console main center bracket assembly
16.Console main rear lower bracket assembly
20.Front end console cover assembly
22.Console main tray mat
23.Partition tray
24.Cup guide
25.Ashtray
31.Console upper fascia
32.Console front cover
36.Console front fascia assembly
37.Console upper fascia
38.Transmission gear shift A/T cover assembly
39.Console front tray assembly
41.Screw
42.Screw
43.Nut
44.Rivet screw
05-18
7710-00 05-19

1. Engine compartment insulator


2. Partition insulator
3. Dash upper insulator
5. Nut
6. Dash inner insulator
11.Floor front mat assembly
12.Floor center mat assembly
13.Floor rear mat
15.Car mat hook
05-20
7730-00 05-21

1. A-pillar trim assembly


2. Bolt
3. A-pillar cap
4. B-pillar upper trim assembly
6. B-pillar lower trim assembly
7. Trim mounting clip
8. Cowl side trim assembly
9. Cowl side upper trim assembly
11.Quarter upper trim assembly
12.Quarter lower trim assembly
13.Quarter upper cap
14.Power socket assembly
15.Luggage cover mounting cap
16.Luggage hook assembly
17.Luggage hook cover
18.Seat belt guide
19.Screw grommet
20.Screw
21.Screw
22.Door scuff front trim assembly
23.Door scuff rear trim assembly
25.clip
26.Door scuff front outer trim
27.Door scuff rear outer trim
28.Rear transverse trim assembly
29.LUGGAGE COVER
30.clip
31.Screw grommet
33.Rear transverse blanking cover
05-22

1. Luggage compartment cover assembly 15.Luggage center lower tray


2. LUGGAGE NET 16.Luggage hook assembly
4. Luggage lid assembly 20.Screw
11.Trim mounting bracket assembly 21.Screw
12.Luggage front trim assembly 22.Screw grommet
13.LUGGAGE TRAY 23.Rivet screw
14.Luggage center tray
7770-00 05-23

1. Sunvisor assembly 11.Inside rearview mirror cover


2. Sunvisor assembly 12.ETCS unit assembly
3. Grommet 13.ETCS antenna assembly
4. Screw 20.Overhead console switch
5. Sunvisor retainer assembly 22.Screw
10.Inside rearview mirror assembly 40.Overhead console mounting bracket
05-24

2. Cowl upper anti-pad 8. Rear floor front anti-pad


3. Front floor front anti-pad 9. Spare tire anti-pad
5. Front floor center anti-pad 11.Rear floor rear outer anti-pad
6. Front floor rear anti-pad 12.Rear wheel house inner anti-pad
7. Front floor rear center anti-pad
7610-01 05-25

- Disconnect the negative battery cable.


- Remove the center console. Refer to "Removal and installation, Center
console" section of "Body, Interior".

Front
side

Rear
view
05-26

1. Remove the crash pad side cover assembly.

Crash pad side mounting clip

2. Unscrew the two mounting screws on the


lower main panel assembly.

3. Pry off the lower main panel assembly


and disconnect the connection to remove
the lower main panel assembly.
Lower main panel mounting clip

Switch connector Fuel filler door cable Diagnostic connector


7610-01 05-27

4. Unscrew the two mounting bolts (T45) for


the driver air bag module assembly.

5. Lift up the driver air bag module and


remove the inflator connector by using a
small flat-blade screwdriver as follows:

Use a screwdriver with its tip wrapped in


protective tape.

Refer to the "Driver air bag module" section


of "Body, Air bag".

6. Remove the driver air bag module


assembly.

7. Disconnect the connector (A) for the audio


remote controller switch and cruise control
switch.
05-28

8. Remove the steering wheel assembly


mounting nut (22 mm) to remove the
steering wheel assembly.

Put align marks on the column shaft and


the steering wheel mounting nuts before
removing the steering wheel.

9. Unscrew the 3 shroud lower panel


assembly mounting screws.

10.Separate the shroud upper panel from the


lower panel with a remover and remove the
shroud lower panel assembly.

Use a tool, such as a pair of hand remover


pliers, when removing the shroud upper
and lower panel assemblies. Using other
tools may cause damage to the cover.

11.Unscrew the two mounting screws of the


cluster fascia panel assembly to remove
the shroud upper panel assembly.
7610-01 05-29

12.Disconnect the 4 connectors for the contact


coil from the steering column shaft and
remove the contact coil from the column
shaft.

(A) Steering wheel heated wire unit


(B) Air bag connector
(C) Auto cruise switch
(D) contact coil

Use a screwdriver with its tip wrapped in


protective tape.

13.Remove the light switch (A) and wiper


switch (B) from the steering column in the
direction of the arrow by pressing the
release button through the hole (A).

Light switch (A) Wiper switch (B)


05-30

14.Disconnect the connectors (key switch connector (A), immobilizer antenna connector (B), key
remind switch connector (C)) which are connected to the key switch.

Light switch wiring clamp

Inflator wiring clamp

15.Unscrew the lower mounting bolt (A, 12


mm) on the lower shaft, two upper
mounting bolts (B, 12 mm) and two lower
mounting bolts (C, 12 mm) on the column
shaft to remove the column shaft and the
lower shaft assembly.

Lower mounting bolts Upper mounting bolts Lower mounting bolts


7610-01 05-31

16.Remove the A-pillar trim assemblies on


both sides by using the same method.

17.Remove the door scuff front trim


assemblies on both sides by using the
same method.

18.Unscrew the mounting screw (A) for the


cowl side trim assembly to remove the cowl
side trim assembly. Repeat this step for the
opposite side.

19.Remove the passenger side fascia panel


assembly.
Side fascia panel mounting clips
05-32

20.Open the glove box and unscrew the two


mounting screws to remove the passenger
side fascia molding assembly.
Side fascia molding mounting clips

21.Unscrew the 5 mounting screws of the side


fascia panel assembly to remove the side
fascia panel assembly.
Side fascia panel mounting clips

22.Open the glove box, remove the locking


devices and lower it down.

23.Unscrew the two glove box mounting bolts


(A, 10 mm) and 5 mounting screws (B).
7610-01 05-33

24.Disconnect the glove box lamp


connector (A) and remove the glove box
switch (B) to remove the glove box.

25.Disconnect the passenger air bag module


connector.

26.Unscrew the two mounting bolts (10 mm)


and two mounting nuts (10 mm) for the
passenger air bag module.

27.Remove the center fascia molding assembly.

Center fascia fixing clip


05-34

28.Unscrew the center fascia panel assembly


mounting screw (A).

29.Remove the center fascia panel assembly.

30.Unscrew the four audio mounting screws


(A).

31.Lift out the audio and disconnect the


connectors.

(A) Wiring connector


(B) USB connector
(C) AUX connector
(D) Antenna
7610-01 05-35

32.Disconnect the switch module connector


under the audio.

33.Unscrew the 4 mounting screws (A) for


the heater and A/C control.

34.Remove the heater and A/C control


assembly.

35.Disconnect the heater and A/C control


assembly connectors (A and B).
05-36

36.Disconnect the connectors under the


heater and A/C control assembly.
(A) AUX connector
(B) USB connector
(C) Cigar lighter connector

37.Remove the cowl side upper trims on both


sides.

38.Unscrew the 3 mounting screws for the


instrument cluster to remove it.

39.Disconnect the sun sensor connector fitted


to the left side of the crash pad assembly
and remove the sun sensor.
7610-01 05-37

40.Remove the mountings on the crash pad assembly.

Driver cowl side upper trim- Passenger cowl side upper trim-
Two mounting nuts (A, 10 mm) Three mounting nuts (A, 10 mm)
Two mounting bolts (B, 10 mm) One mounting bolt (B, 10 mm)

Two mounting screws

On the instrument cluster- Center mountings


One mounting bolt (10 mm) One mounting nut (A, 10 mm)
Four mounting bolts (B, 10 mm)
05-38

41.Installation is in the reverse order of removal.


7610-17 05-39

- Disconnect the negative battery cable.

Glove box assembly

1. Remove the passenger side fascia panel


assembly.
Side fascia panel mounting clips

2. Open the glove box and unscrew the two


mounting screws on the fascia molding
(RH).
05-40

3. Remove the side panel molding assembly


(RH).
Side fascia molding mounting clips

4. Unscrew the 5 mounting screws for the


side fascia panel assembly (RH).

5. Remove the side fascia panel assembly


(RH).
Side fascia panel mounting clips

6. Open the glove box, remove the locking


devices in sequence and lower them down.
7610-17 05-41

7. Unscrew the two glove box mounting bolts


(A, 10 mm) and 5 mounting screws (B).

8. Disconnect the glove box lamp connector


(A) and remove the glove box switch (B)
to remove the glove box.

9. Installation is in the reverse order of


removal.
05-42

- Disconnect the negative battery cable.

Cluster fascia panel


assembly

1. Unscrew the two mounting bolts (T45) for


the driver air bag module assembly.

2. Remove the driver air bag module


assembly.

Refer to the "Driver air bag module


assembly" section of "Body, Air bag".
7610-27 05-43

3. Unscrew the 3 shroud lower panel


assembly mounting screws.

4. Separate the shroud upper panel from the


lower panel with a remover.

5. Remove the shroud lower panel assembly.

6. Unscrew the two mounting screws on the


cluster fascia panel assembly.
05-44

7. Remove the cluster fascia panel assembly.

8. Installation is in the reverse order of


removal.

Cluster fascia panel mounting clips


7870-09 05-45

Side fascia panel (LH)


assembly

1. Remove the crash pad side cover


assembly.

2. Unscrew the two mounting screws on the


lower main panel assembly.
05-46

3. Pry off the lower main panel assembly and


disconnect the connection to remove the
lower main panel assembly.

4. Unscrew the 3 shroud lower panel


assembly mounting screws.

5. Separate the shroud upper panel from the


lower panel with a remover and remove the
shroud lower panel assembly.

Use a tool, such as a pair of hand remover


pliers, when removing the shroud upper
and lower panel assemblies. Using other
tools may cause damage to the cover.

6. Unscrew the two mounting screws of the


cluster fascia panel assembly to remove the
shroud upper panel assembly.
7870-09 05-47

7. Unscrew the 2 mounting screws (A) for the


side fascia panel assembly

8. Remove the side fascia panel assembly.

9. Installation is in the reverse order of


removal.

Cluster fascia panel mounting clips


05-48

- Disconnect the negative battery cable.

Center fascia panel


assembly

1. Unscrew the two mounting bolts (T45) for


the driver air bag module assembly.

2. Remove the driver air bag module


assembly.

Refer to the "Driver air bag module


assembly" section of "Body, Air bag".
7610-16 05-49

3. Unscrew the 3 shroud lower panel


assembly mounting screws.

4. Separate the shroud upper panel from the


lower panel with a remover and remove the
shroud lower panel assembly.

Use a tool, such as a pair of hand remover


pliers, when removing the shroud upper
and lower panel assemblies. Using other
tools may cause damage to the cover.

5. Unscrew the two mounting screws of the


cluster fascia panel assembly to remove the
shroud upper panel assembly.

6. Separate the center fascia molding


assembly using a remover.
05-50

7. Disconnect the ignition switch connector.

8. Remove the center fascia molding assembly.

Center fascia fixing clip

9. Unscrew the one mounting screw for the


center fascia panel assembly.

10.Remove the center fascia panel assembly.


7610-16 05-51

11.Installation is in the reverse order of


removal.

Center fascia panel mounting clips


05-52

- Disconnect the negative battery cable.

Side fascia panel (RH)


assembly

1. Remove the passenger side fascia panel


assembly.
Side fascia panel mounting clips

2. Open the glove box and unscrew the two


mounting screws on the fascia molding
(RH).
7610-10 05-53

3. Remove the side panel molding assembly


(RH).
Side fascia molding mounting clips

4. Unscrew the 5 mounting screws for the


side fascia panel assembly (RH).

5. Remove the side fascia panel assembly


(RH).
Side fascia panel mounting clips

6. Installation is in the reverse order of


removal.
05-54

- Disconnect the negative battery cable.

Front console (2-Tray)

1. Remove the TGS lever mounting screw


cover.

2. Unscrew the TGS lever mounting screw.


7630-01 05-55

3. Remove the TGS lever.

4. Lift out the console cover assembly and


disconnect the connector.

5. Remove the console cover assembly.

Console cover mountings

6. Disconnect the heated wire connector of


the front seat.
05-56

7. Remove the mounting screw rivets for the


front end console cover assembly (one
on each side).

8. Unscrew the front console mounting


screws (two on each side).

9. Open the front console tray and unscrew


the 3 mounting bolts (10 mm) in it.

10.Unscrew the two mounting screws (A) on


the upper part of the front console.
7630-01 05-57

11.Remove the front console.

12.Installation is in the reverse order of


removal.
05-58

- Disconnect the negative battery cable.

Front console

1. Lift off the front console cover.

2. Disconnect the heated wire connectors for


the driver's seat (A) and passenger's seat
(B), and then remove the front console
cover.
7630-01 05-59

3. Remove the mounting screw rivets for the


front end console cover assembly (one on
each side).

4. Remove the front end console cover


assemblies on both sides.

5. Unscrew the front console mounting


screws (two on each side).

6. Unscrew the front console mounting


screws (one on each side).
05-60

7. Open the front console tray and unscrew


the 3 mounting bolts (10 mm) in it.

8. Remove the front console.

9. Installation is in the reverse order of


removal.
7730-22 05-61

Door scuff front trim

1. Remove the door scuff front trim assembly.

a. Separate both ends of the scuff (1)


and (2) in the direction of the arrow.
b. Lift up the door scuff.

Follow the removal sequence exactly as


the inner clips may be damaged when
removing the door scuff.

2. Installation is in the reverse order of


removal.

(A): Clips (3 positions)


(B): Parts easily damaged
05-62

Door scuff rear trim


assembly

1. Remove the door scuff rear trim assembly.

2. Installation is in the reverse order of


removal.

Clips: 6 EA
7730-01 05-63

A-pillar trim assembly

1. Remove the A-pillar cap.

2. Unscrew the A-pillar trim mounting bolt


(A, 10 mm).
05-64

3. Remove the front door body side weather


strip.

4. Remove the A-pillar trim assembly.

5. Installation is in the reverse order of


removal.
7730-04 05-65

- Remove the door scuff front and rear trim assemblies.

B-pillar upper trim


assembly

1. Remove the seat belt cover for the B-pillar


lower trim and unscrew the seat belt
mounting bolt (17 mm).

2. Remove the B-pillar lower trim.


05-66

3. Open the B-pillar upper trim cap to


unscrew
the bolt (10 mm).

4. Unscrew the two mounting screws (A) on


the B-pillar upper trim assembly.

5. Separate the seat belt from the B-pillar


and remove the B-pillar upper trim
assembly.

6. Installation is in the reverse order of


removal.
7730-11 05-67

- Remove the door scuff rear trim assembly.

Quarter upper trim assembly

1. Remove the luggage lid (A), luggage


center (B) and luggage center lower (C).

2. Unscrew the luggage tray mounting screws


(4 at each side).
a. Remove the luggage tray (LH).
b. Remove the luggage tray (RH).
05-68

3. Remove the rear transverse trim assembly.

4. Unscrew the 3 mounting screw rivets (A)


for the luggage front trim assembly and
the mounting bolt (B, 10 mm) for the
cover tether anchor.

5. Unscrew the two luggage front trim


assembly mounting screws.
7730-11 05-69

6. Unscrew the 5 quarter lower trim assembly


mounting screws (A).

7. Unscrew the seat belt bolt (17 mm) to


remove the quarter lower trim assembly.

8. Unscrew the two quarter upper trim mounting screws and open the quarter upper cap, then
unscrew the mounting bolt (10 mm).
Quarter upper cap bolt

Mounting screws
05-70

9. Remove the seat belt cover from the quarter


upper trim assembly.

10.Remove the quarter upper trim assembly.

11.Installation is in the reverse order of removal.


.
7770-01 05-71

- Disconnect the negative battery cable.

Sunvisor assembly

1. Unscrew the two sunvisor assembly


mounting screws.

2. Disconnect the sunvisor assembly


connector.
05-72

3. Unscrew the mounting screw on the


sunvisor retainer assembly.

4. Installation is in the reverse order of


removal.
7330-11 05-73

Grip assembly

1. Lower the grip assembly and unscrew the


two mounting screws.

2. Installation is in the reverse order of removal.


05-74

- Disconnect the negative battery cable.


- Remove the A-pillar, B-pillar and C-pillar.
- Remove the room lamp.
- Remove the assist handle grip.
- Remove the sun visor.

Head lining assembly

1. Disconnect the sunroof switch connector


(A) and the front room lamp connector
(B) before removing the overhead
console assembly.
7330-01 05-75

2. Unscrew the coat hook mounting screw on


rear side of the head lining.

3. Unscrew the 6 tree type fastener to remove the head lining assembly.

Mounting location for


coat hook Rear

Front
05-76

5. Installation is in the reverse order of removal.

Front view

Rear view
7115-01 05-77

- Disconnect the negative battery cable.

Front view Rear view

1. Remove the tweeter speaker after


disconnecting the tweeter speaker
connector (A).
05-78

2. Remove the front door trim mounting screws and screw rivets.

Mounting screws Mounting screws Mounting screws

Mounting screws

Screw rivet

3. Separate the door trim mounting key


sections (9 EA) from the trim. Be careful
not to damage the trim.
7115-01 05-79

4. Remove the front door inside handle cable


assembly (A) and the front door safety knob
cable assembly (B).

5. Disconnect the power window switch


connector (A) and the outside rearview
mirror connector (B).

6. Disconnect the door courtesy front


reflector connector.

7. Remove the front door trim.


05-80

8. Installation is in the reverse order of


removal.

Front door trim fasteners (9 positions)


7215-01 05-81

- Disconnect the negative battery cable.

Rear door trim (front view) Rear door trim (back view)

1. Remove the rear door upper cover.


05-82

2. Remove the front door trim mounting screws and screw rivets.

Mounting screws Mounting screws Mounting screws

Screw rivet

Screw rivet

3. Separate the door trim mounting key


sections (9 EA) from the trim. Be careful
not to damage the trim.
7215-01 05-83

4. Remove the rear door inside handle rear


cable assembly (A) and the rear door safety
lock knob cable assembly (B).

5. Disconnect the power window switch


connector (A) and the heated wire
connector for the rear seat (B).

6. Remove the rear door trim.

7. Installation is in the reverse order of


removal.
05-84

Rear door trim mountings (9 positions)


7321-00 05-85

- Disconnect the negative battery cable.

1. Remove the tailgate upper trim.

2. Unscrew the tailgate upper trim mounting 3. Remove the tailgate upper trim carefully
screws one on each side. inwards.
05-86

4. Unscrew the two tailgate lower trim upper 5. Unscrew the two tailgate lower trim lower
mounting screws. mounting screws.

6. Unscrew the two mounting bolts (10 mm) 7. Unscrew the tailgate lower trim lower
after removing the tailgate handle cap. mounting screw rivets.
7321-00 05-87

8. Remove the tailgate trim from below.

Lower trim mounting screw rivets

Upper trim

Lower trim

You might also like