4-2 Syllabus Iv Year Ii Semester S. No. Subject Code Subject Title C L T P
4-2 Syllabus Iv Year Ii Semester S. No. Subject Code Subject Title C L T P
4-2 Syllabus Iv Year Ii Semester S. No. Subject Code Subject Title C L T P
IV YEAR II SEMESTER
The student will be able to calculate Calculate life cycle costing analysis
life cycle costing analysis and return and return on investment on energy
on investment on energy efficient efficient technologies.
technologies
The student will be able to understand Able to formulate simple playback and
economic aspects net present worth method.
Unit–I
Basic Principles of Energy Audit and management
Energy audit – Definitions – Concept – Types of audit – Energy index – Cost index – Pie
charts – Sankey diagrams – Load profiles – Energy conservation schemes and energy
saving potential – Numerical problems – Principles of energy management – Initiating,
planning, controlling, promoting, monitoring, reporting – Energy manager – Qualities
and functions – Language – Questionnaire – Check list for top management.
Unit –II
Lighting
Modification of existing systems – Replacement of existing systems – Priorities:
Definition of terms and units – Luminous efficiency – Polar curve – Calculation of
illumination level – Illumination of inclined surface to beam – Luminance or brightness –
Types of lamps – Types of lighting – Electric lighting fittings (luminaries) – Flood
lighting – White light LED and conducting Polymers – Energy conservation measures.
Unit–III
Power Factor and energy instruments:Power factor – Methods of improvement –
Location of capacitors – Power factor with non linear loads – Effect of harmonics on
Power factor – Numerical problems. Energy Instruments – Watt–hour meter – Data
loggers– Thermocouples – Pyrometers – Lux meters – Tong testers – Power analyzer.
Unit –IV
Space Heating and Ventilation:Ventilation – Air–Conditioning (HVAC) and Water
Heating: Introduction – Heating of buildings – Transfer of Heat–Space heating methods –
Ventilation and air–conditioning – Insulation–Cooling load – Electric water heating
systems – Energy conservation methods.
Unit–V
Economic Aspects and Analysis:Economics Analysis – Depreciation Methods – Time
value of money – Rate of return – Present worth method – Replacement analysis – Life
cycle costing analysis – Energy efficient motors (basic concepts).
Unit–VI
Computation of Economic Aspects: Calculation of simple payback method – Net
present worth method – Power factor correction – Lighting – Applications of life cycle
costing analysis – Return on investment.
Text Books:
1. Energy management by W.R. Murphy & G. Mckay Butter worth, Elsevier
publications.
2. 2012Energy efficient electric motors by John .C. Andreas, Marcel Dekker Inc Ltd–2 nd
edition,
1995
Reference Books:
1. Electric Energy Utilization and Conservation by S C Tripathy, Tata McGraw hill
1998.
3. Energy management hand book by W.C.Turner, John wiley and sons.
4. Energy management and conservation –k v Sharma and pvenkata seshaiah-I K
International Publishing House pvt.ltd,2011.
http://www.energymanagertraining.com/download/Gazette_of_IndiaP artIISecI-37_25-
IV YEAR – II T P C
SEMESTER 3+1 0 3
Sub Code: 14120862b SPECIA L ELECTRICAL CHINES
MA
The student will be able to know the Able to explain theory of operation
theory of operation and control of and control of switched reluctance
switched reluctance motor. motor.
The student will be able to explain the Able to explain the performance and
performance and control of stepper control of stepper motors, and their
motors, and their applications. applications
The student will be able to describe Able to describe the operation and
the operation and characteristics of characteristics of permanent magnet
permanent magnet dc motor. dc motor.
The student will be able to distinguish Able to distinguish between brush dc
between brush dc motor and brush motor and brush less dc motor.
less dc motor.
The student will be able to explain the Able to explain the theory of
theory of travelling magnetic field and travelling magnetic field and
applications of linear motors. applications of linear motors.
UNIT I
Electric Motors for traction drives:AC motors– DC motors –Single sided linear
induction motor for traction drives – Comparison of AC and DC traction
UNIT II
Stepper Motors: Construction – Principle of operation – Theory of torque production –
Hybrid stepping motor –Variable reluctance stepping motor – Open loop and closed loop
control.
UNIT III
Switched Reluctance Motor: Principle of operation – Design of stator and rotor pole arc
– Power converter for switched reluctance motor – Control of switched reluctance motor.
UNIT IV
Permanent Magnet DC Motors: Construction – Principle of working – Torque equation
and equivalent circuits – Performance characteristics – Moving coil motors.
UNIT V
Permanent Magnet Brushless DC (BLDC) Motor: Construction – Principle of
operation – Theory of brushless DC motor as variable speed synchronous motor – Sensor
less and sensor based control of BLDC motors
UNIT VI
Linear motors: Linear induction motor: Construction– principle of operation–
applications. Linear synchronous motor: Construction – principle of operation–
applications.
Text Books:
1. Special electrical Machines, K.Venkata Ratnam, University press, 2009, New Delhi.
2. Brushless Permanent magnet and reluctance motor drives, Clarenden press, T.J.E. Miller,
1989, Oxford.
3. Special electrical machines, E.G. Janardhanan, PHI learning private limited, 2014.
Refernce Books:
UNIT-I
The smart grid: Introduction, Ageing Assets and Lack of Circuit capacity, Thermal
constraints, Operational constraints, security of supply, National Initiatives, Early smart
grid initiatives, Active distribution networks, virtual power plant, Other Initiatives and
Demonstrations, Overview of te Technologies Required for the smart grid.
Outcome: Know the concept on constraints, initiatives, distribution networks of smart
grids and technology required for smart grids.
UNIT-II
Communication Technologies: Data communication: Introduction, Dedicated and
shared communication channels, switching Techniques, Circuit Switching, Message
Switching, Packet Switching, communication channels, wired communication, optical
fiber, Radio communication,
Cellular Mobile communication, Layered architecture and protocols, The ISO/OSI
Model, TCP/IP
Communication Technologies: IEEE 802 Series, Mobiles Communications, Multi
protocol Label Switching, Power line communication, Standards for information
Exchange, Standards for smart meteting, Modbus, DNP3, IEC61850.
UNIT-III
Information Security for the Smart Grid: Introduction, Encryption and Decryption,
Symmetric key encryption, Public key Encryption, Authentication, Authentication based
on shared secret key, Authentication based on key distribution center, digital signature,
Secret key signature, Public key signature, Message digest, Cyber Security standards,
IEEE 1686: IEEE standard for substation intelligent Electronic Devices(IEDs) Cyber
security capabilities, IEC 62351: power systems management and Association
information exchange-data and communication security.
UNIT-IV
smart metering:Introduction, Smart metering- evolution of electricity metering, key
components of smart metering, Smart meters: An Overview of the hardware used – signal
acquisition, signal conditioning, analogue to digital conversion, computation,
input/output and communication. Communication infrastructure and protocols for smart
metering- Home area network, Neighborhood area network, data concentrator, meter
management system, protocols for communication.
.UNIT-V
Demand side Integration- Services provided by DSI, Implementation of DSI, hardware
support, Flexibility delivered by prosumers from the demand side, system support from
DSI.
UNIT-VI
Transmission and Distribution Management Systems:Data sources, Energy
management system, wide area Applications, Visualization Techniques, Data sources and
Associated external systems, SCADA, customer information system, modeling and
analysis Tools, distribution system modeling,
Topology analysis, load forecasting, power flow analysis, Fault calculations, state
estimation, applications, system monitoring, operation, management Outage management
system, Energy storage technologies, Batteries, flow battery, Fuel cell and Hydrogen
Electrolyser, Fly wheels, superconducting Magnetic energy storage systems, super
capacitors. Text Books:
1. Smart grid, Janaka Ekanayake, Liyanage, Wu, Akihiko yokoyama, Jenkins, Wiley
publications, 2012.
Reference Books:
1. Smart Grid: Fundamentals of Design and Analysis, James Momoh, Wiley, IEEE
Presss., 2012.
IV YEAR – II L+T P C
SEMESTER 3+1 - 3
Sub Code: 14125864b Data base Management Systems
Course Objectives: Provides students with theoretical knowledge and practical skills
in the use of databases and database management systems in information technology
applications. The logical design, physical design and implementation of relational
databases are covered.
Course Outcomes:
• define a Database Management System
• give a description of the Database Management structure understand the
applications of Databases
• know the advantages and disadvantages of the different models
• compare relational model with the Structured Query Language (SQL)
• know the constraints and controversies associated with relational database
model. know the rules guiding transaction ACID
• understand the concept of data planning and Database design identify the various
functions of Database Administrator
Unit-I
Introduction: Data base System Applications, data base System VS file System,
Advantages of a DBMS View of Data, Data Abstraction, instances and Schemas, data
Models, the ER Model, Relational Model, Other Models
Unit-II
Database Languages: DDL, DML, DCL. Database Access for applications Programs,
Storage Manager, the Query Processor, Transaction Management, data base System
Structure, data base Users and Administrator
Unit-III
History of Data base Systems::Data base design and ER diagrams, Beyond ER Design
Entities, Attributes and Entity sets, Relationships and Relationship sets, Additional
features of ER Model, Concept Design with the ER Model, and Conceptual Design for
Large enterprises.
Unit- IV
Basic SQL Query: Basic SQL querying (select and project) using where clause,
arithmetic & logical operations, Set ,Comparison Operators, NULL values , Comparison using
Null values, sub queries, grouping, aggregation, ordering, implementation of different
types of joins, Simple Database schema, data types, table definitions, different types of DML
and DDL operations
Unit-V
SQL and PL/SQL: Creating tables with relationship, implementation of key and
integrity constraints, views. Introduction to PL/SQL, PL/SQL procedures, functions,
triggers, cursors, exception handling, packages, varrays, table types. SQL constructs that
grant access or revoke access from user or user groups.
Unit–VI
Schema Refinement (Normalization): Purpose of Normalization or schema refinement,
concept of functional dependency, normal forms based on functional dependency (1NF,
2NF and 3 NF), concept of surrogate key, Boyce-codd normal form (BCNF), Lossless
join and dependency preserving decomposition, Fourth normal form (4NF).
Text Books:
1. Database System Concepts 6e By Abraham Silberschatz, Henry Korth and S
Sudarshan
2. Database Management Systems, 3/e Raghuram Krishnan, Johannes Gehrke, TMH
Reference Books:
1. Introduction to Database Systems, 8/e C J Date, PEA
2. The Database book principles & practice using Oracle/MySql Narain Gehani, University
Press.
3. Oracle Database 11g. The complete reference (oracle press)