Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    XDC.3... P: Roportional Directional Valves Closed Loop Position Control

    Uploaded by

    Pitupy
    The document discusses proportional directional valves with closed loop position control. Specifically: 1) The valves (XDC series 2) control flow direction and volume based on current to the proportional solenoid. An inductive position transducer monitors the spool position. 2) An electronic card (SE.AN.21.RS series 3) uses the error between actual and reference position to precisely position the spool, reducing hysteresis and repeatability errors. 3) Pressure compensators and greater capacity bases are available for more accurate flow control and higher flow rates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    XDC.3... P: Roportional Directional Valves Closed Loop Position Control

    Uploaded by

    Pitupy
    48 views2 pages
    The document discusses proportional directional valves with closed loop position control. Specifically: 1) The valves (XDC series 2) control flow direction and volume based on current to the proportional solenoid. An inductive position transducer monitors the spool position. 2) An electronic card (SE.AN.21.RS series 3) uses the error between actual and reference position to precisely position the spool, reducing hysteresis and repeatability errors. 3) Pressure compensators and greater capacity bases are available for more accurate flow control and higher flow rates.

    Original Title

    xdc.3

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses proportional directional valves with closed loop position control. Specifically: 1) The valves (XDC series 2) control flow direction and volume based on current to the proportional solenoid. An inductive position transducer monitors the spool position. 2) An electronic card (SE.AN.21.RS series 3) uses the error between actual and reference position to precisely position the spool, reducing hysteresis and repeatability errors. 3) Pressure compensators and greater capacity bases are available for more accurate flow control and higher flow rates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    48 views2 pages

    XDC.3... P: Roportional Directional Valves Closed Loop Position Control

    Uploaded by

    Pitupy
    The document discusses proportional directional valves with closed loop position control. Specifically: 1) The valves (XDC series 2) control flow direction and volume based on current to the proportional solenoid. An inductive position transducer monitors the spool position. 2) An electronic card (SE.AN.21.RS series 3) uses the error between actual and reference position to precisely position the spool, reducing hysteresis and repeatability errors. 3) Pressure compensators and greater capacity bases are available for more accurate flow control and higher flow rates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    XDC.3...

    PROPORTIONAL DIRECTIONAL VALVES


    CLOSED LOOP POSITION CONTROL
    The valves XDC serie 2 control the direction and the volume of the flow according to the feed-
    ing current to the proportional solenoid. The position transducer type LDVT (inductive position
    transducer) monitors the actual position of the spool.

    In the electronic card (type SE.AN.21.RS...serie 3) the error between the actual position and
    XDC.3...002 the reference signal is used to obtain a greater precision of the spool positioning, reducing also
    STANDARD CONNECTORS CH. I PAGE 19 considerably the hysteresis and the repeatibility error of the valve. For a more accurate flow
    PROPORTIONAL SOLENOID CH. VIII PAGE 9 control, 2 or 3-way pressure compensators modular plate design are available.
    SE.3.AN21.RS...03 CH. IX PAGE 13 The shown flow rates are typical for one line operation (e.g. from P to B). By using the valve
    AM.3.H... CH. VIII PAGE 16 with the base for capacity doubling type BC.3.07 greater capacity can be obtained.
    AM.5.H... CH. VIII PAGE 17
    BC.3.07... CH. VII PAGE 12

    XDC.3.C.01.N... XDC.3.C.03.N... XDC.3.C.01.P...

    XDC.3.A.01.N... XDC.3.A.03.N... XDC.3.A.01.P...

    Registered mark for industrial environment with reference to the electromagnetic


    compatibility.
    European norms: EN50082-2 - general safety norm - industrial environment;
    EN50081-1 -emission general norm - residential environment

    ORDERING CODE

    XDC Proportional directional valve INPUT SIGNAL CURVES - FLOW RATE


    with closed loop position control XDC.3.*.01.N XDC.3.*.01.N
    3 CETOP 3/NG6 (4 l/min P → A/B) (8 l/min P → A/B)
    6

    * A = Single solenoid 5
    C = Double solenoid with Δp = 10 bar
    4
    Q (l/min)

    ** Type of spool (null position) AM3.H.2V. Q (l/min)


    3 (Δp = 8 bar)

    01 = 03 = 2 with
    AM.3.H.3V.P1.08
    1 (Δp »8 bar)
    * Flow path control (see hydraulic symbols
    0
    N = symmetrical
    8 *
    P = meter in (only with 01 spool)
    Flow rating l/min (Δp 10 bar)
    0 20 40
    I (%)

    XDC.3.*.01.N
    40 40 100
    I (%)

    XDC.3.*.01.N
    A = 4 l/min
    In order to reduced the un- (15 l/min P → A/B) (25 l/min P → A/B)
    1 = 8 l/min loading pressure for rated
    2 = 15 l/min flow version at 40 l/min we
    3 = 25 l/min advise to use the 3 way type
    Δp = 10 bar
    6 = 40 l/min AM.5.H.3V... hydrostat.
    Q (l/min)

    Q (l/min)

    Δp = 10 bar

    F Max. current at solenoid: 1.76 A


    Δp = 5 bar Δp = 5 bar

    S1 No variant (without connectors)*

    2 Serial No. I (%) I (%)

    XDC.3.*.01.N
    (40 l/min P → A/B) CONFIGURATION FOR DOUBLE
    Notice: FLOW RATE
    in order to control the valve XDC3...serie 2
    it need to use the electronic card SE.AN.21.RS...serie 3,
    in exclusive way (See Ch. IX).
    Q (l/min)

    Δp = 10 bar

    (*) All variants are considered without connectors. Δp = 5 bar


    The connectors must be order separately.
    See Ch. I Page 19 XDC.3.A...

    I (%) BC.3.07
    Standard subplate

    File: XDC3002_E VIII • 8 03/2011/e


    XDC.3... PROPORTIONAL DIRECTIONAL VALVES CLOSED LOOP POSITION CONTROL
    AMPLIFIER UNIT AND CONTROL
    OPERATING SPECIFICATIONS OF VALVE WITH TRANSDUCER SE.3.AN.21.RS...serie 3 - Electronic card EU-
    ROCARD format for control of the proportional
    Max. operating pressure ports P/A/B 350 bar
    valve equipped with transducer
    Dynamic pressure port T 210 bar
    Static pressure port T 210 bar AM.3.H.2V.P1 / AM.3.H.3V.P1
    Nominal flow 8 / 15 / 25 / 40 l/min AM.5.H.3V.P1 (*)
    Duty cycle Continuous 100% ED
    Hydrostats 2 or 3 way
    Type of protection (depending on the connectors used) IP 65
    (*) for rated flow XDC3 version at 40 l/min ) only
    Performance curves See diagrams
    Fluid viscosity 10 ÷ 500 mm2/s
    Fluid temperature -20°C ÷ 75°C
    TRANSDUCER ELECTRICAL CONNECTIONS
    Ambient temperature -20°C ÷ 70°C
    Max. contamination level class 7 to 9 in accordance to NAS 1638 with filter ß10≥75
    Weight XDC.3.A... (single solenoid) 1,94 Kg TRANSDUCER
    Weight XDC.3.C... (double solenoid) 2,55 Kg
    Max. current 1.76 A
    Solenoid coil resistance at 20°C (68°F) 4.55 Ω
    Solenoid coil resistance when hot 7.34 Ω
    Hysteresis P/A/B/T with pressure compensator AM.3.H.3V... <1% 1 = Supply 18VDC ÷ 36VDC
    Transient function with stepped electrical input signals Δp = 5 bar (P/A) 3 = Mass
    0 ÷ 100% 65 ms 2 = Output 2V ÷ 10V
    100% ÷ 0 75 ms
    POSITION TRANSDUCER SPECIFICATION
    Repeatibility <0,5%
    Frequency response -3db (Input signal ±25% Vmax) 10 Hz Electrical measuring system LVDT
    Nominal stroke 6 mm
    Insulation class wire H
    Electrical connection M12x1
    Weight of solenoid 0,6 Kg
    Insulation
    (depending on the connector used) IP65
    Operating specifications are valid for fluids with 46 mm2/s viscosity at 40°C, using the Frequency response 500 Hz
    SE3AN21RS... serie 3 ARON electronic control unit powered to 24V. Linearity tolerance ±1%

    PROPORTIONAL
    SOLENOID

    OVERALL DIMENSIONS

    Fixing screws UNI 5931 M5x25 Support plane


    (min. 8.8 material screws are recommended) specifications
    Tightening torque 4 ÷ 5 Nm / 0.4 ÷ 0.5 Kgm
    SOL_XDC - 01/2000/e

    File: XDC3002_E VIII • 9 03/2011/e

    You might also like