Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 116 views

    Hydraulic Motor Type Mhl... : Max. Speed (RPM)

    Uploaded by

    Pitupy
    The document provides technical specifications for Caproni's MGL series hydraulic motors. Key details include: 1. The MGL series motors have displacements ranging from 50-315 cm3/rev and can operate at pressures up to 140 bar, flows up to 60 lpm, and speeds up to 603 RPM. 2. The motors are recommended to operate with mineral-based hydraulic oils between 20-75 mm2/s at temperatures from -30°C to 90°C. 3. Dimensions, mounting information, shaft configurations, and performance data are provided for proper selection and installation of the appropriate MGL motor.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hydraulic Motor Type Mhl... : Max. Speed (RPM)

    Uploaded by

    Pitupy
    116 views9 pages
    The document provides technical specifications for Caproni's MGL series hydraulic motors. Key details include: 1. The MGL series motors have displacements ranging from 50-315 cm3/rev and can operate at pressures up to 140 bar, flows up to 60 lpm, and speeds up to 603 RPM. 2. The motors are recommended to operate with mineral-based hydraulic oils between 20-75 mm2/s at temperatures from -30°C to 90°C. 3. Dimensions, mounting information, shaft configurations, and performance data are provided for proper selection and installation of the appropriate MGL motor.

    Original Description:

    Motores caproni

    Original Title

    Orbital_motors

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides technical specifications for Caproni's MGL series hydraulic motors. Key details include: 1. The MGL series motors have displacements ranging from 50-315 cm3/rev and can operate at pressures up to 140 bar, flows up to 60 lpm, and speeds up to 603 RPM. 2. The motors are recommended to operate with mineral-based hydraulic oils between 20-75 mm2/s at temperatures from -30°C to 90°C. 3. Dimensions, mounting information, shaft configurations, and performance data are provided for proper selection and installation of the appropriate MGL motor.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    116 views9 pages

    Hydraulic Motor Type Mhl... : Max. Speed (RPM)

    Uploaded by

    Pitupy
    The document provides technical specifications for Caproni's MGL series hydraulic motors. Key details include: 1. The MGL series motors have displacements ranging from 50-315 cm3/rev and can operate at pressures up to 140 bar, flows up to 60 lpm, and speeds up to 603 RPM. 2. The motors are recommended to operate with mineral-based hydraulic oils between 20-75 mm2/s at temperatures from -30°C to 90°C. 3. Dimensions, mounting information, shaft configurations, and performance data are provided for proper selection and installation of the appropriate MGL motor.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 9

    HYDRAULIC MOTOR TYPE MHL...

    TECHNICAL DATA
    Max. speed(rpm) da Max. pressure(bar)

    BULGARIA , 6100 KAZANLAK , 45 STOLETOV Str.


    Tel.:+359/431/62 229 , +359/431/6132 ,
    Fax:+359/431/62 230 , +359/431/63 134
    E-mail:caproni@caproni.bg , WEB:http://www.caproni.bg
    HYDRAULIC MOTOR TYPE MHLR...

    TECHNICAL DATA
    da Max. pressure(bar)

    50 190 775 10 140 40


    80 195 750 20 175 60
    100 198 600 24 175 60
    125 203 475 30 175 60
    160 209 375 39 175 60
    200 216 300 38 140 60
    250 225 240 37 110 60
    315 236 190 36 85 60
    400 250 150 38 64 60
    HYDRAULIC MOTORS MGL ...
    GENERAL INFORMATION

    MGL motors are a light series in CAPRONI product line. MGL series is a gerotor design
    with spool valve which includes high pressure HNBR shaft seal, so that an external
    drain is never required. This is an economical motor for most light to medium duty
    applications.

    In order MGL motors to have optimal working conditions, the following


    recommendations should b e k e p t :

    - Recommended Fluids – mineral based hydraulic oils with viscosity range of 32-
    46 mm2/s at 40°C, should be used.
    - Operating temperature should be in the range of 20-60°C
    - Contamination of the working oil during the time of operation should not exceed
    the class of 20/16 ISO 4406.
    - In order to be in compliance with this requirement the integrated filter in the
    hydraulic system should have nominal degree of filtration 25µ.

    Before starting operation the following steps are recommended for maximal life:

    - Before starting fill the motor with oil.


    - Run the motor without load for 15 minutes in order to purge the air of the system.
    - The system should work without load for 30 minutes with 10µ installed filter in
    order to rinse it.

    After these procedures the recommended filter should be mounted and the system
    should be ready for regular operation.

    Displacement [cm3/rev.] 50 ÷ 315

    Maximum pressure [bar] 140

    Maximum oil flow [lpm] 25 ÷ 60

    Maximum speed [RPM] 603

    Maximum torque [daNm] 7.4 ÷ 30.5

    Minimum speed [RPM] 10

    Temperature range [°C] -30 ÷ 90

    Viscosity range [mm2/s] 20 ÷ 75


    HYDRAULIC MOTORS MGL ...
    PERFORMANCE DATA

    MGL MGL MGL MGL MGL MGL MGL MGL


    Type
    50 70 100 130 160 200 250 315
    Displacement [cm3/rev.] 49.7 69.6 101.2 129.4 159.3 200.8 249.7 314.6
    Cont. 603 430 490 380 300 240 230 190
    Max. Speed
    Int.* 810 646 590 460 360 290 270 220
    Max. Torque Cont. 7,4 11 14,7 19,5 24,6 28 28,4 30,5
    [daNm] Int.* 8,8 13,4 18,2 23,2 28,2 34 34,5 38,2
    Max. Output Cont. 4,6 4,8 7,4 7,6 7,6 6,9 6,7 5,9
    [KW] Int.* 7,3 8,9 11 11 10,4 10,1 9,6 8,6
    Max. Oil Flow Cont. 30 30 50 50 50 50 60 60
    [l/min] Int.* 45 45 60 60 60 60 70 70
    Cont. 120 120 120 120 105 105 105 90
    Max. Pressure
    Int.* 140 140 140 140 120 120 120 110
    [bar]
    Peak** 175 175 175 175 175 175 175 175
    Min. Speed [RPM] 10 10 10 10 10 10 10 10

    * Intermittent duty must not exceed 10% of every minute


    ** Peak duty must not exceed 1% of every minute

    Pressure Loss

    25

    20

    15
    ΔP [bar]

    10

    0
    0 10 20 30 40 50 60 70
    Q [l/min]
    HYDRAULIC MOTORS MGL ...
    MOUNTING

    ø13,3 +0.4

    45 -0.2

    106,4 ± 0.2
    Lmax
    130 ± 0.5

    ø90 +0.5

    ø86 ± 0.2 Type L*


    46 -0.4
    MGL 50 … 109
    MGL 70 … 112
    MGL 100 … 116
    MGL 130 … 120
    MGL 160 … 125
    MGL 200 … 128
    MGL 250 … 135
    Port B PortA MGL 315 … 141
    41,2 ± 0.15
    16,5

    - 0,05
    ø82,5 - 0,15

    Port(A,B): 2xG1/2 or 2xM22x1,5 - 15mm depth


    HYDRAULIC MOTORS MGL ...
    SHAFTS

    S - Parallel key A8x7x32 DIN 6885


    Max. torque 34daNm

    M8
    min16deep

    -0.01
    ø25-0.02
    ø27
    28-0.2

    8-0.036
    43±0.4

    55max

    SC - Parallel key 14"x14"x114" BS46


    Max. torque 34daNm

    M8
    min16deep

    ø25,4-0.02
    28,1-0.2

    ø27

    6,4-0.05
    43±0.4

    55max

    SB - Splined, BS2059, Deep splines1', Fit2


    Max. torque 40daNm
    +0.025
    6,25 -0.05

    M8
    min16 deep
    ø25,32±0.3
    ø27

    26,4min
    ?21,47±0.05
    43,15±0.4
    55max

    SE - Splined DIN5482, B25x22 h9


    Max. torque 40daNm

    M8
    min16 deep
    ø24,5-0.1
    ø27

    26,4min

    43±0.4

    55max
    HYDRAULIC MOTORS MGL ...
    TECHNICAL DATA

    Prad

    Pamax=200daN

    Pamax=150daN

    L=30

    P rad P e rm is s ib le s h a ft lo a d s
    [d a N ]
    700

    600

    500

    400

    300

    200

    100

    0
    0 100 200 300 400 500 600 700 800

    S p e e d [R P M ]
    HYDRAULIC MOTORS MGL ...
    ORDERING CODE

    MGL 1/P1

    CODE Ports
    1MGL 2MGL G G1/2 BSPP
    M M22x1,5 Metric
    Standard Rotation Reverse Rotation

    B A B A

    Standard option

    Displacement CODE Shafts


    CODE
    cm3/rev S
    Ø25mm straight, Parallel key A8x7x32
    50 49.7 DIN 6885
    70 69.6 Ø25,4mm straight, Parallel key ¼“ x ¼“ x 1 ¼“
    SC
    100 101.2 BS46
    130 129.4 SB Ø25,32 Splined, BS2059
    160 159.3 SE Ø24,5 Splined B25x22 h9, DIN5482
    200 200.8
    250 249.7
    315 314.6
    HYDRAULIC MOTORS MGL ...

    BULGARIA JOINT-STOCK COMPANY

    BULGARIA, 6100 KAZANLAK, 45 STOLETOV Str.


    Fax: +359/431/62 230, +359/431/63 134
    E-mail: caproni@caproni.bg , WEB: http://caproni.bg

    You might also like