Isquander Yunus Hvac Engineer Contact No: +966 581421096: Curriculam Vitae
Isquander Yunus Hvac Engineer Contact No: +966 581421096: Curriculam Vitae
Isquander Yunus Hvac Engineer Contact No: +966 581421096: Curriculam Vitae
ISQUANDER YUNUS
HVAC ENGINEER
Contact no: +966 581421096
isqander.yunus@gmail.com
OBJECTIVE
To secure an opportunity where my experience and ability can produce outstanding reward for
bothorganization and myself. As a candidate, I have self confidence in my duty and I can assure you that if I
have given an opportunity to prove my abilities and always will assist for the growth of
the organization.
PROFESSIONAL EXPERIENCE :
Organization : SEPCO II
Position : HVAC Engineer (COMMISSIONING)
Duration : JUNE 2018- Present
Client : SAUDI ARAMCO
Project : JIGCC POWER BLOCK PROJECT, JIZAN SAUDI ARABIA
Review of all ITP/QCP material approval prior for project plan preparation.
Ensuring that Project quality Plan and procedures are activated at site.
Performing inspections of installations when advised by construction-in-charges/ site
Supervisors.
Monitoring the phases of quality control of work as per specification.
Development of preliminary layout according to project input.
Maintain inspection and testing records.
Reviewing and Closing SSR and NCR of materials prior to assembly for scratches, damages,
cracks, de lamination, crushing, weathering.
Coordination with main contractor’s MEP coordinator and Consultant on all aspects of site
inspections.
To conduct surveillance on the inspection tests required in the technical provisions of the
specification.
To carry out the preparatory, initial and follow up inspections as per the approved ITP.
To perform and witness all testing required at sub-vendors premises and approved
independent testing laboratory as recommended.
Ensuring that all concealed works are completed satisfactorily and accepted by consultant
before clearing to civil and finishes team.
Follow of ASME, ASHRAE, SMACNA standards.
Coordinating with engineering manager, lead designers, fabrication shop & site
supervisors for execution of work.
Planning and co-ordination of works with management teams
Support to incidental works and other new works projects
Keeping detailed site records for changes and progress to the works Supervision of
mechanical installation
Ensure staffs are trained to carry out works safely, efficiently and to current standards.
Monitor performance and report accordingly
Monitoring and ensuring the project program is maintained.
Responsible for ensuring compliance with relevant legislation, health & safety, quality
assurance & environment.
Performing installation as per ARAMCO standards.
Verifying ARAMCO standards for the Installation..
Monitoring the phases of quality control of work as per specification.
Familiar with SAES-K-001 like ANSI B31.5, ASHRAE STD 15
Maintain accurate and calibrated inspection tools and equipment for consistent
measurements of operation of the inspection and testing system.
Maintain inspection and testing records.
Coordination with main contractor’s MEP coordinator and Consultant on all aspects of site
installation.
To conduct surveillance on the inspection tests required in the technical provisions of
the specification.
To carry out the preparatory, initial and follow up inspections as per the approved ITP.
To perform and witness all testing required at sub-vendors premises and approved
independent testing laboratory as recommended.
Ensuring that all concealed works are completed satisfactorily and accepted by consultant
before clearing to civil and finishes team.
Familiar with the standards like ASME, ASHRAE, SMACNA, NFPA.
Verify indoor air conditions including temperature, humidity, air change rates and air
quality of each area of a health care facility shall be as per recommendations of ASHRAE,
HVAC Applications Handbook Chapter on Health Care Facilities.
Verify Chilled water pumps shall comply with the requirements of ANSI B73.1.
Check that all symbols and abbreviations on HVAC drawings shall be consistent with
SMACNA, ASHRAE.
All refrigerant containing parts of the air conditioning equipment shall be pressure tested
in accordance with ASHRAE STD 16.
After installation, inspect that all field-erected refrigerant piping, regardless of the
quantity of refrigerant charge, shall be pressure-tested in accordance with the
requirements of the Uniform Mechanical Code (UMC) and ASHRAE STD 16.
• Inspection of HVAC:
Installation of refrigerant pipe
Pressure test of refrigerant pipes.
Duct work installation with hangers and supports
Installation of duct accessories, Air terminal devices
Smoke and leak test.
Installation of HVAC equipment(AHU,ACCU,BF,EF,CFU,STU, AIR STACK)
EDUCTIONAL QUALIFICATION:
B.Tech (Mechanical Engineering) from Visvesvaraya Technological University,
Belgaum, India.
.
COMPUTER PROFICIENCY:
AutoCAD
ANSYS
Solid Edge
NX CAD
Operating system MS Windows, XP,7,8
Office suit Working knowledge of MS-word, MS-excel & Power Point.
Familiar with Internet Operations
Personal details:
Nationality : Indian
Iqama no : 2440044028
Religion : Islam
Gender : Male
Marital status : single
Languages : English, Hindi, Arabic .