Instruction Manual For Loading Monitor

Rev.
4
MM261102
INSTRUCTION MANUAL
LOADING MONITOR
CONTENTS
PREFACE
PREFACE ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 4
BEFORE READING THIS INSTRUCTION MANUAL ‥‥‥‥‥‥ 5
SOFTWARE LICENSE AGREEMENT ‥‥‥‥‥‥‥‥‥‥‥‥ 6
ARTICLE 1 CAUTIONS
FOR YOUR SAFETY OPERATION ‥‥‥‥‥‥‥‥‥‥‥‥‥ 8
ABOUT INSTALLATION OF FOREIGN APPLICATION PROGRAM ‥ 10
ARTICLE 2 STRUCTURE OF FILE

STRUCTURE OF DIRECTORY FILE ‥‥‥‥‥‥‥‥‥‥‥‥ 12
ARTICLE 3 SPECIFICATION
SPECIFICATION ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 14
ARTICLE 4 START AND QUIT

START OF PROGRAM ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 16
QUIT OF PROGRAM ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 18
ARTICLE 5 OPERATION OF SCREEN

MAIN MENU SCREEN ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 20
F6 INITIAL SETTING ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 21
Initial Data Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 21
Content S.G. Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 23
F7 INITIAL TANK SETTING ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 27
Cargo Tanks Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 27
Ballast Tanks Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 32
Other Tanks Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 33
Alarm Setting Level/Temp. Screen ‥‥‥‥‥‥‥‥‥‥‥‥ 34
Alarm Setting O.Capa. Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 36
F2 TANK ARRANGEMENT ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 38
All Tanks Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 47
Received Data Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 48
CONTENTS
ARTICLE 5 OPERATION OF SCREEN

Received Raw Data Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 50
Trim/Heel Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 52
Draft Sketch Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 55
Shearing Force Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 56
Bending Moment Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 57
Shearing Force of Lng. B'hd Screen ‥‥‥‥‥‥‥‥‥‥‥‥ 58
F3 BAR DISPLAY ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 59
Ballast Tanks Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 62
All tanks Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 65
F5 TANK SELECT ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 66
Tank Select Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 66
Loading Condition Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 68
F4 REPORT CAPACITY ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 72
All Tanks Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 82
Loading Tank Selection Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥ 84
F8 CALCULATION ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 90
Main Menu Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 90
F1 PRINT ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 91
Printing of Data Screen ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 91
F10 EXIT ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 95
ARTICLE 6 SET-UP
BEFORE SETTING-UP ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 98
INSTALLING THE SOFTWARE ‥‥‥‥‥‥‥‥‥‥‥‥‥ 99
UNINSTALL OF PROGRAM SOFTWARE ‥‥‥‥‥‥‥‥‥ 106
ARTICLE 7 ABBREVIATIONS
ABBREVIATIONS ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥ 112
PREFACE
AT THE BEGINNING
PREFA CE
This LOADING MONITOR is a software to monitor tank condition and drafts during
loading or unloading of cargo, filling or discharging of water ballast, bunkers or other
contents. Performance of this software is ensured when it works by O.S. Windows
XP, 2000, ME, 98 SECOND EDITION, and 98.
CA U TI O N
The operator shall read this Manual to understand fully the software of the system
before starting of operation for its safety and efficient usage. Actual illustration on the
screen and content of program may be somewhat different from the explanation in this
Manual.
STRUTURE
OF FILE
It is recommended to keep this Manual at your hand during operation of the program
for easy solving of any problem.
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
INQUIRY OR CORRESPONDENCE ABOUT PRODUCT:
MUSASINO CO., LTD.

Service Group
Address:
1-2-15, Minami-yukigaya, Ohta-ku, Tokyo 145-0066, Japan
SET-UP
Telephone: +81-3-3726-4419
Facsimile: +81-3-3726-4405
URL: http://www.musasino.co.jp
E-mail: service1@musasino.co.jp
ABBREVIATIONS
(after expiry of warrantee period)
-4-
BEFORE READING THIS INSTRUCTION MANUAL
PREFA CE
Windows
This Manual is prepared for the understandable level of the basic operation of O.S.
Windows.
Operation of mouse and windows, method of opening or closing File, or other
CA U TI O N
operational way in this Manual are similar as standard of other application for the
Windows.
When anybody operates Windows at the first time, please refer to the Manual of
Windows.
OF FILE
STRUTURE
Computer
When any query comes on equipment or the operation of the Computer, please refer to
the Manual of the Computer.
SPECIFICATION
Mouse
Usually “to click Mouse” denotes “to click left mouse button”. When it needs “to click
right Mouse button”, it will be described obviously as “to click right mouse button”.
START AND
QUIT
Printer
When any query comes on equipment or the operation of the printer, please refer to the
Manual of the printer. OPERATION
OF SCREEN
Backup Power
When any query comes on equipment or the operation of the backup power, please refer
to the Manual of the backup power.
SET-UP
If power supply becomes black out when working on the Program and backup power
has started, please save the data for the Program and then quit the Program.
ABBREVIATIONS
-5-
SOFTWARE LICENCE AGREEMENT
The application program of LOADING MANUAL (hereinafter called as Program) is a

PREFA CE
subject to the legal agreement between the ship’s owner/operator (hereinafter called as
User) and Musasino Co., Ltd (hereinafter called Company) as described hereunder.
1. License
The Company grants the User a license to use the Program on a single-Computer or
on the network. The User may not use this software on more than one Computer at
CA U TI O N
anytime.
2. Copyright
The Program is copyrighted so that you may make only one copy of the Program for
back-up purpose, which shall not be used on the other Computer by copying
Program for any reason.
STRUTURE
3. Restriction
OF FILE
The User may not modify, reverse-engineer, reverse-compile or reverse assemble

the Program for any reason.
4. Transfer and Lending

SPECIFICATION
The User may not sublicense, transfer (to sell, donate or exchange) or lend the
copyright of the Product to the third party without prior written permission from the
Company. Also any act of rental, suspected rental, lease or trading as used material
is prohibited.
5. Duration of Agreement
Agreement will become effective on the commissioning date of the User, and
START AND
terminated on the final date of operation by the User. However, if the User breaches
any clause of the Agreement, the Company will deprive the User of the using right
QUIT
of the Program, and reserve the right of terminating agreement.
6. Duty after Expiration of Agreement

When the Agreement is terminated, the User shall destroy the Program as not to
reusable by the third party and dispose it, and also dispose the copy and all relevant
OPERATION
OF SCREEN
references of the Program.

7. Limitation
The Company shall not be responsible for any direct, indirect, or consequential
damage lost of data program or any damage on the intangible property caused by
using the Program.
SET-UP
ABBREVIATIONS
-6-
ARTICLE 1
CAUTIONS
FOR YOUR SAFETY OPERATION
ARTICLE 1
Mistaken operation of the Computer or the printer will cause human accident by fire
PREFA CE
or electric shock, and also the application program will be damaged resultantly. For
prevention of the accident, the warning and the caution are given by the following marks
for the dangerous operation and handling.
You shall pay all attention to the operation and/or handling of Computer and Printer
involving dangers for prevention of the accident.
CA U TI O N
If you do not follow to the Caution, it may result in fatal

Warning! accident or serious injury by the fire or electric shock.
STRUTURE
OF FILE
If you do not follow to the Caution, it may result in

Caution! abnormal working of Computer and Printer.
SPECIFICATION
Mark calling Mark indicating Act. Mark to prohibit Act.

Attention.
Caution. To pull Plug from Prohibited. No wet hand. No water.
Receptacle.
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-8-
ARTICLE 1
Warning!
PREFA CE
When smoke, strange sound or odor smell comes out from
the Computer or the printer, operation shall not be continued,
and electric code shall be disconnected from receptacle after
immediate switching off power supply. Then to follow to the
CA U TI O N
instruction on the Manual.
Not to locate at the oil-misty, wettish or dusty place.
When foreign material or any watery liquid enters into the inside
of the equipment, operation shall not be continued, and electric
OF FILE
STRUTURE
code shall be disconnected from receptacle after immediate
switching off power supply. Then to follow to the instruction on
the Manual.
SPECIFICATION
Caution!
When no using for longtime, electric cable shall be disconnected
from the receptacle.
When moving the Computer or the printer, disconnection of all
START AND
QUIT
electric cable shall be confirmed after switching off power supply
and pulling plug from receptacle.
Not to obstruct a vent hole of the Computer and the printer.
When paper is stuck inside, the printer shall not use as it is, but it
OPERATION
shall be removed immediately.
OF SCREEN
Not to fit the equipment at the unstable place.
Not touch the plug by wet hand.

SET-UP
When connecting power supply cable or electric wire, power

Caution!
supply shall be switch off without fail.
ABBREVIATIONS
-9-
ABOUT INSTALLATION OF
ARTICLE 1 FOREIGN APPLICATION PROGRAM
It shall be taken in your consideration that any trouble caused by installing foreign
PREFA CE
application program or utilizing Computer for other purpose will not be subject to the
guarantee even if it is occurred before expiry of the guarantee period.
CA U TI O N
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-10-
ARTICLE 2
STRUCTURE OF FILE
STRUCTURE OF DIRECTORY FILE
STRUCTURE OF DIRECTORY FILE
ARTICLE 2
The Directory Files of the Program are constituted as follows.
PREFA CE
(Common Folders) (Common Folders) ・Exe. Files of various

Applications
・Various CSV Files
CA U TI O N
・Various Binary Files

・Various TEXT Files
(Common Folders) ・CSV File

STRUTURE
OF FILE
・CSV File
SPECIFICATION
(Common Folders)
・CSV File
・CSV File
START AND
QUIT
・CSV File
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-12-
ARTICLE 3
SPECIFICATION
SPECIFICATION
ARTICLE 3
It shall be noted that the Specification of the LOADING MONITOR is not possible
to change after delivery because it has been fixed in accordance with the result of
PR EFAC E
discussion with the ship’s owner and building shipyard, approved drawings and
technical discussion.
Standard Display
CAUTION
1. Indication of Tank Level and Alarming

(Setting Range of Alarm: between 0 and Full in m.)
2. Indication of Tank Temperature and Alarming
STRUTURE
(Setting Range of Alarm: between 0 and 150 in deg.C.)

OF FILE
3. Indication of Tank Pressure and Alarming

(Setting Range of Alarm: between -7 and 50 in kPa.)
4. Indication of Content Volume
SPECIFICATION
5. Indication of Correction Factor of Float Buoyancy for difference of

Specific Gravity
6. Indication of Tank Level and Content Volume after corrected by Trim
and Heel
7. Indication of setting of Oil kind, Specific Gravity, Volume of Loading
START AND
or Unloading Cargo
QUIT
8. Indication of Print out

9. Indication of Buzzer Alarm
OPERATION
OF SCREEN
Optional Display
1. Indication of Independent Alarming

2. Indication of detailed Drafts after corrected by Trim and Heel
SET-UP
3. Indication of Function of Loading Calculation

ABBREVIATIONS
-14-
ARTICLE 4
START AND QUIT
START OF PROGRAM
QUIT OF PROGRAM
START OF PROGRAM
ARTICLE 4
The Program shall be started following to the guidance hereunder.
PREFA CE
1. Start from on Task-bar.

☞ To start up Windows after switching on Computer.
2. To click left mouse button (hereinafter to describe simply as Mouse) pointing at
button, to move Mouse pointer scrolling continuously to “Programs”,
“Loading Computer” and to “Monitor”, and then to click Mouse.
CA U TI O N
☞ Then the Program will start.

STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
To click here.
OPERATION
OF SCREEN
　　 “Monitor” icon will appear on the desk top.
To click right mouse button pointing at “Monitor”, and to click Mouse pointing at
“Create Shortcut”.
To drag the alias icon of "Shortcut" to the desk top.
☞ Thereafter, the Program can be opened by double-click of Mouse pointing at
SET-UP
shortcut icon.
Screen will be changed to the Main Menu Screen.

ABBREVIATIONS
To be continued.
-16-
4
STRUTURE START AND OPERATION

PREFA CE CA U TI O N SPECIFICATION SET-UP ABBREVIATIONS
ARTICLE
OF FILE QUIT OF SCREEN

Main Menu Screen is displayed.
START OF PROGRAM
-17-
QUIT OF PROGRAM
ARTICLE 4
The Program shall be finished following to the guidance hereunder.
PREFA CE
1. To click Mouse pointing at on the Control Menu Box.

☞ Alternatively, to quit the Program by pushing function key “F10”.
CA U TI O N
STRUTURE
OF FILE
To click here.
SPECIFICATION
Desk Top Screen will be displayed.

START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-18-
ARTICLE 5
OPERARION OF SCREEN
MAIN MENU SCREEN
F6 INITIAL SETTING
F7 INITIAL TANK SETTING
F2 TANK ARRANGEMENT
F3 BAR DISPLAY
F5 TANK SELECT
F4 REPORT CAPACITY
F8 CALCULATION
F1 PRINT
F10 EXIT
MAIN MENU SCREEN
ARTICLE 5
When the Program is started, the following screen will be displayed.
PREFA CE
①
Displaying Ship’s
Name.
Displaying Owner’s
Name.
CA U TI O N
Displaying
Shipyard’s Name
and Ship No..
Displaying the
delivered date of the
Program of
STRUTURE
LOADING
MONITOR.
OF FILE
SPECIFICATION
① Control Menu Box on Main Menu Screen contains nine (9) items corresponding to
Function Keys.
To click Mouse pointing at one of the switch button among F1 to F8, F10 on Control
Menu Box, desirous to see.
☞ Alternatively, to push one of Function Keys among F1 to F8 and F10 for selection
of the screen desirous to see.
START AND
F1 To print the loading condition of various tanks, and to

QUIT
print data back-up every hour.
F2 To display Tank Arrangement and Loading Condition.
F3 To display Tank Loading Amount in bar graph.

OPERATION
OF SCREEN
F4 To display Tank Loading Volume in table.
F5 To display Cargo Tanks’ Loading Condition in detail.
F6 To initial-set Loading Tanks.
F7 To set type of cargo, or type of tank contents, specific

gravity, temperature and planned loading amount.
SET-UP
F8 To jump to other application program, LOADING

COMPUTER.
☞ If no LOADING COMPUTER is installed, there is no
display of this screen.
F10 Quit of the application program, LOADING

ABBREVIATIONS
MONITOR.
-20-
F6 INITIAL SETTING
ARTICLE 5
Initial Setting for loading cargo will be carried out on this Screen.
PREFA CE
Initial Data Screen
This screen is for setting initial value of various items.
However, this Screen has been already set so that those value shall be revised by input if
necessary to do.
CA U TI O N
To click Mouse pointing at Tab, “Initial Data”.
OF FILE
STRUTURE
①
Clicking this button,
Screen will return to
Main Menu Screen
② after saved setting
result.
SPECIFICATION
Clicking this button,
Screen will return to
Main Menu Screen
without saving
③
setting result.
START AND
QUIT
④
OPERATION
OF SCREEN
① To be used as a column of Remarks.
To point at blank space, to click Mouse and to input remarks.
To input them here.

SET-UP
ABBREVIATIONS
To be continued.
-21-
F6 INITIAL SETTING
ARTICLE 5
② To indicate type of Load line, corresponding Deadweight and Draft of the ship.
PREFA CE
To point at radio button, and to click Mouse.
To click Mouse pointing

at one of radio buttons for
type of Load line.
CA U TI O N
③ To indicate Total Weight of consumable dry, fresh and refrigerated provision for
STRUTURE
crew, its Center of Gravity from Midship and above keel.

OF FILE
To point at blank space, to click Mouse and to input calculated figures.
To input them here.

SPECIFICATION
Caution
In case of summing “Provision” and “Constant” in accordance with the
START AND
specification, this column is omitted.

QUIT
④ To indicate Total Weight of Constant including Men and Effect, Boatswain Store,
Spare and Inventory, and Oil and Water in piping, and its Center of Gravity from
Midship and above keel.
OPERATION
OF SCREEN
To point at blank space, to click Mouse and to input calculated figures.
To input them here.

SET-UP
Caution
In case of summing “Provision” and “Constant”in accordance with the
ABBREVIATIONS
specification, this column may include “Provision”.
-22-
F6 INITIAL SETTING
ARTICLE 5
Content S.G. Screen
PREFA CE
This screen is for setting initial value of various items.
To click Mouse pointing at Tab, “Content C.G.”.
CA U TI O N
① ② ③ ④ ⑤
Screen will
scroll.
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
Clicking this button, Screen will Clicking this button, Screen will
return to Main Menu Screen after return to Main Menu Screen without
saved setting result. saving setting result.
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-23-
F6 INITIAL SETTING
ARTICLE 5
① To input Kind of Oil or Content.
PREFA CE
☞ “Content” is able to involve 50 kinds of items.
If new item is required to add, to point at blank cell, to click Mouse and to input
item it.
If any existing item is required to revise, then to select such item on the cell
moving cursor of Mouse, and to rewrite new item instead.
CA U TI O N
To input or rewrite here.

STRUTURE
OF FILE
Caution
SPECIFICATION
“Space” shall not be used because it is not recognized as character in the Program so
that underscore “_” shall be used instead.
② To input Specific Gravity (S.G.) of Cargo Oil or Content at the temperature of 15

deg. C or A.P.I. Gravity (API) at 60 deg. F.
START AND
If new S.G. or API is required to add, to point at blank cell, to click Mouse and to
input figure.
QUIT
If any existing figure is required to revise, then to select such figure on the cell
moving cursor of Mouse, and to rewrite new figure instead.
OPERATION
OF SCREEN
To input or rewrite here.

SET-UP
Caution
Figure shall be raised to the fourth decimal place.
ABBREVIATIONS
To be continued.
-24-
F6 INITIAL SETTING
ARTICLE 5
③ To select a type of Cargo or Content from Type of ASTM Table.
PREFA CE
To click Mouse pointing at subject Cell so that Scroll Menu will appear. Then to
select by clicking the planned type in there.
To click here.
CA U TI O N
⇨ ⇨
OF FILE
STRUTURE
Caution
Type of Cargo or Content in the Scroll Menu includes seven (7) types; 6A, 6B, 54A,
54B, W, LO and Chemical.
SPECIFICATION
④ To set Volume Correction Factor (Vcfcf) of Chemical when “Chemical” is selected
in the Table.
Please calculate setting value in accordance with the formula.

Formula
START AND
S.G. at S.G. at
QUIT
＝ Standard temp. −（Estimate temp. − Standard temp.）× VCFCF
Estimate temp.
To click Mouse pointing at the cell, then to input.
To click here.
OPERATION
OF SCREEN
⇨
SET-UP
Caution
✦ Vcfcf is required only for selecting “Chemi.”(Chemical) so that the Cell will be
shaded in gray ( ) and not be able to set.
✦ Figure shall be raised to the sixth decimal place.
ABBREVIATIONS
To be continued.
-25-
F6 INITIAL SETTING
ARTICLE 5
⑤ To select Color to express kind of Cargo or Content in the tank at the Tank
PREFA CE
arrangement.
To click Mouse pointing at Select for kind of Cargo or Content.
To click here.
CA U TI O N
STRUTURE
OF FILE
Sub-screen of “Color Select ” will appear.

SPECIFICATION
To click Mouse pointing at setting Color.
Not recommended
area to select.
START AND
QUIT
OPERATION
OF SCREEN
return to Content S.G. Screen after return to Content S.G. Screen
saved setting result. without saving setting result.
Caution
As Red family and purple family colors are adopted in alarming color at alert condition
SET-UP
in the Screen, they shall not be used for this purpose.

ABBREVIATIONS
-26-
ARTICLE 5
Loading condition of individual tanks shall be planned, and estimated data shall be
inputted in the Table on the Screen.
PREFA CE
Cargo Tanks Screen
The Screen is for setting Kind of Cargo or Content in the tanks, Specific Gravity,
Temperature and planned Loading Capacity.
CA U TI O N
To click Mouse pointing at Tab, “Cargo Tanks”.
② ③ ④ ⑤ ⑥ ⑦ ⑧
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
①
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-27-
ARTICLE 5
① To select either “Loading” or “Discharge” Condition of Cargo and/or other Tank
PREFA CE
Content.
To click Mouse pointing at one of the Radio Buttons.
To click one of the Radio buttons.

CA U TI O N
Caution
“Discharge” is applicable to Cargo Tanks Screen only. It is shown also on the Screen of
other Tab, but not necessary to select.
STRUTURE
OF FILE
② Tank Names on the ship are listed in cells of this row.

SPECIFICATION
START AND
QUIT
Caution
All Tank Names are fixed so that neither changing nor adding is allowed.
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-28-
ARTICLE 5
③ To select Kind of Cargo or Content in each tank.
PREFA CE
To click Mouse pointing at subject Cell so that Scroll Menu will appear. Then to
select by clicking the planned Kind of Cargo or Content in there.
To click here.
CA U TI O N
⇨
OF FILE
STRUTURE
Specific Gravity in the corresponding Cell under the Column of “Density” and
SPECIFICATION
Type of Cargo or Content is displayed automatically.
START AND
QUIT
Caution OPERATION
OF SCREEN
Indications in the Cells of “Content”, “Density” and “Table” set on the Screen of F6
Initial Setting-Content S.G. will be displayed.
However, those Indications are unchangeable here, and changeable by rewriting on the
Screen of F6 Initial Setting-Content S.G..
SET-UP
ABBREVIATIONS
To be continued.
-29-
ARTICLE 5
④ To input planned Temperature of Cargo or Content in the tanks.
PREFA CE
To input by clicking Mouse pointing at the Cell under the Column of Temp.
To input them here.

CA U TI O N
STRUTURE
OF FILE
About “Unit”
Unit of Temperature is “deg. F” for 6A or 6B at the Column of “Table”. In case of Type

of Cargo or Content is other than 6A or 6B, Temperature shows in “deg. C”.
SPECIFICATION
⑤ To input planned Loading Capacity in kL (observed volume:O.Capa) at the

Temperature of “15 deg. C” or “60 deg. F”.
To click Mouse pointing at the Cell, then to input.

START AND
To input them here.

QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-30-
ARTICLE 5
⑥ To input Ratio of Loading Capacity to Maximum Loading Capacity in %.
PREFA CE
To input them here.
CA U TI O N
OF FILE
STRUTURE
⑦ To input corrected cargo volume at the planned Temperature.
SPECIFICATION
To input them here.
START AND
⑧ To input Pre-alarming position (to be less volume than that at the Alarming Level) QUIT
to display as Warning before raising Alarm. OPERATION
OF SCREEN
To input them here.

SET-UP
ABBREVIATIONS
-31-
ARTICLE 5
Ballast Tanks Screen
PREFA CE
The Screen is for setting Kind of Water Ballast in the tanks, Specific Gravity,
Temperature and planned Loading Capacity.
Refer
Displayed Columns are same as Cargo Tanks Screen so that please refer to the “Cargo
CA U TI O N
Tanks Screen”.
To click Mouse pointing at Tab, “Ballast Tanks”.

STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
Refer
SET-UP
As to setting of “Loading” or “Discharge”, please refer to the Screen of F7 Initial Tank

Setting-Cargo Tanks.
ABBREVIATIONS
-32-
ARTICLE 5
Other Tanks Screen
PREFA CE
The Screen is for setting Kind of Contents in the tanks, Specific Gravity, Temperature
and planned Loading Capacity.
Refer
Displayed Columns are same as Cargo Tanks Screen so that please refer to the “Cargo
Tanks Screen”.
CA U TI O N
To click Mouse pointing at Tab, “Other Tanks”.
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
Refer
SET-UP

ABBREVIATIONS
-33-
ARTICLE 5
Alarm Setting Level/Temp. Screen
PREFA CE
The Screen is for setting of various Alarms of Cargo Tanks.
To click Mouse pointing at Tab, “Alarm Setting Level/Temp.”.

CA U TI O N
①
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
Refer
SET-UP
ABBREVIATIONS
To be continued.
-34-
ARTICLE 5
① To input Alarming point of each Tank.
PREFA CE
CA U TI O N
To input Alarming point at Low
Pressure.
To input Alarming point at High

Pressure.
OF FILE
STRUTURE
Temperature.

Temperature.
SPECIFICATION
Level.

Level.
START AND
QUIT
Showing Tank
Name.
Refer
Setting point for Level Alarm is different between “Loading” and “Discharge”. OPERATION
OF SCREEN
✦ High Level Alarm shall be set as Alarm for “Loading” Cargo or Content.
✦ Low Level Alarm shall be set as Alarm for “Discharge” Cargo or Content.
SET-UP
ABBREVIATIONS
-35-
ARTICLE 5
Alarm Setting O.Capa. Screen
PREFA CE
The Screen is to set the Alarming Point for F5 Tank Select.
To click Mouse pointing at Tab, “Alarm Setting O.Capa.”.

CA U TI O N
①
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
Refer
SET-UP
ABBREVIATIONS
To be continued.
-36-
ARTICLE 5
① To input Alarming point of Loading Capacity of each Tank.
PREFA CE
Setting is only for Cargo Tanks. Alarming points can be inputted up to 5 points.
CA U TI O N
To input fifth Alarming point.
To input fourth Alarming point.
OF FILE
STRUTURE
To input third Alarming point.
To input second Alarming point.
To input first Alarming point.
SPECIFICATION
Showing Tank Name.
Caution
When no setting of Alarming point, NULL will be displayed at the Cell.
START AND
QUIT
Example of display at the Screen of F5 Tank Select-loading Condition.
OPERATION
OF SCREEN
O.Capa 1 O.Capa 2 O.Capa 3 O.Capa 4 O.Capa 5

SET-UP
ABBREVIATIONS
-37-
F2 TANK ARRANGEMENT
ARTICLE 5
Tank Arrangement and Loading Condition are displayed for each tank.
Trim and Heel are controlled here.
PREFA CE
Cargo Tanks Screen

The Screen displays Tank Arrangement and Loading Condition of Cargo Tanks.
The result of setting at F6 Initial Setting and F7 Initial Tank Setting are displayed
CA U TI O N
on this Screen.

STRUTURE
OF FILE
①
SPECIFICATION
START AND
QUIT
Clicking this button, the overview

OPERATION
Clicking this button, Screen will

OF SCREEN
list, “Received Data” will be opened. return to Main Menu Screen.

SET-UP
ABBREVIATIONS
To be continued.
-38-
F2 TANK ARRANGEMENT
ARTICLE 5
① To show Loading Condition of the tank.
PREFA CE
☞ The figures listed in “F2 Tank Arrangement-Received Data” are displayed here.
Showing Tank Name.
Showing raw level by Ullage in m.
CA U TI O N
Showing corrected level with Specific Gravity, Trim and Heel by
Ullage in m.
Usually blank, but "OF" or "HH" colored in red will appear when
Level reaches alarming level of "OverFlow" or "High-high".
☞ It will appear only for the case provided with an optional
Indepecdent Alarming.
OF FILE
STRUTURE
Showing Temperature colored in green at the higher position in the
tank.
☞ It will become red when Temperature is raised up to the same or
more higher with alarming point set on the Screen of F7 Initial
Tank Setting-Alarm Setting Level/Temp..
SPECIFICATION
Showing Temperature colored in green at the lower position in the
tank.
☞ It will become red when Temperature is raised up to the same or
more higher with alarming point set on the Screen of F7 Initial
Tank Setting-Alarm Setting Level/Temp..
Showing Tank Pressure.
START AND
QUIT
Showing Tank Fullness Ratio of present tank level to the full tank
level.
Green colored area shows present tank level set on the Screen of
F6 Initial Setting-Content S.G..
Red colored area means that Level reaches Pre-alarming position

set on the Screen of F7 Initial Tank Setting-Cargo Tanks. OPERATION
OF SCREEN
Caution
The above explanation assumes that Measuring system of Cargo Tanks is Ullage.
SET-UP
ABBREVIATIONS
To be continued.
-39-
F2 TANK ARRANGEMENT
ARTICLE 5
About “Raising Alarm”
PREFA CE
Alarm will be displayed by “Alarming Color” when reached Pre-alarming point or

Alarming point set on the Screen of F7 Initial Tank Setting.
In addition, Sub-screen of Buzzer will be displayed at the left top when alarm is raised.
✦ Pre-alarm : displayed coloring in purple ( ).
✦ Alarm : displayed coloring in red ( ).
CA U TI O N
How to stop “Buzzer”
Alarming color with its current level in red will be displayed at the alarming tank, and
Sub-screen of Buzzer will be displayed simultaneously.
When stopping Buzzer, please take the following operation after confirmed the
STRUTURE
alarming condition.
OF FILE
1. To click Mouse pointing at Button, at the Sub-screen.

☞ Then, Buzzer will be stopped.
☞ Alternatively, Buzzer will be stopped by pushing function key, F11.
SPECIFICATION

☞ Then, Buzzer will be reset, the level character will be changed in more deep
color, and Sub-screen will be disappeared.
☞ Alternatively, Buzzer will be reset by pushing function key, F12.
To click here.
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-40-
F2 TANK ARRANGEMENT
ARTICLE 5
About “Error Message for Communication”
PREFA CE
If the communication signal, RS232C is not received for 1 (one) min. and more, the
Error Message will be displayed at the left bottom of Screen. When the Error Message,
is displayed, the wiring of Personal Computer or Control Panel shall
be checked, and recovery shall be tried.
When recovery is not completed, please inform to our Service Center, contact point of
which is shown at “PREFACE, AT THE BEGINNING” on Page 4.
CA U TI O N
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
“Error Message of Communication” appears.
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-41-
F2 TANK ARRANGEMENT
ARTICLE 5
PREFA CE
If any trouble is occurred at the detector, the Sub-screen of Error Message will be
displayed at the right top.
When the Sub-screen of the Error Message is displayed, please take the following
operation.
CA U TI O N
Clicking this button, Screen of

“Received Data” will be displayed.
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
Screen of “Received Data” will be sidplayed.

SET-UP
ABBREVIATIONS
To be continued.
-42-
F2 TANK ARRANGEMENT
ARTICLE 5
Screen will be changed to “Received Data”, and the Error Message
PREFA CE
will be displayed at the right bottom of the screen.
As the Communication Error will be boxed in red cell with Asterisk mark ( ＊ ) for
the troubled tank, the wiring of the Detector or Control Panel shall be checked, and
recovery shall be tried.
After recovered the situation, Screen of “Received Data” and Error Message will be
disappeared.
CA U TI O N
Caution
No Communication Error is displayed for Independent Alarm.
OF FILE
STRUTURE
“Error of Communication” appears.
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
“Error Message of Communication” appears.

SET-UP
ABBREVIATIONS
-43-
F2 TANK ARRANGEMENT
ARTICLE 5
PREFA CE
The Screen displays Tank Arrangement and Loading Condition of Ballast Tanks.
The result of setting at F6 Initial Setting and F7 Initial Tank Setting are displayed on
this Screen.
CA U TI O N
①
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
Clicking this button, the overview Clicking this button, Screen will
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-44-
F2 TANK ARRANGEMENT
ARTICLE 5
① To show Loading Condition of the tank.
PREFA CE
☞ The figures listed in “F2 Tank Arrangement-Received Data” are displayed here.
Showing Tank Name.
Showing observed level by Sounding in m.
CA U TI O N
Showing corrected level with Specific Gravity, Trim and Heel by
Sounding in m.
Showing Tank Fullness Ratio of present tank level to the full tank
level.
OF FILE
STRUTURE
Blue colored area shows present tank level set on the Screen of
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-45-
F2 TANK ARRANGEMENT
ARTICLE 5
Other Tanks Screen
PREFA CE
The Screen displays Tank Arrangement and Loading Condition of Other Tanks.
this Screen.
Refer
CA U TI O N
Displayed Columns are same as Ballast Tanks Screen so that please refer to the “Ballast
Tanks Screen” .

STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-46-
F2 TANK ARRANGEMENT
ARTICLE 5
All Tanks Screen
PREFA CE
The Screen displays Tank Arrangement and Loading Condition of All Tanks.
To click Mouse pointing at Tab, “All Tanks”.
CA U TI O N
To be Unit
of Loading
Level.
OF FILE
STRUTURE
To be Unit
of Ratio of
Loading
Level to
Alarming
Level.
SPECIFICATION
To show
present
Pressure of
Vapor Return
Line.
START AND
QUIT
OPERATION
OF SCREEN
Caution
No Alarming color for Pre-alarm or Alarm is shown on this Screen.
SET-UP
ABBREVIATIONS
-47-
F2 TANK ARRANGEMENT
ARTICLE 5
Received Data Screen
PREFA CE
The Screen shows Level, Temperature, Pressure and Loading Condition at Alarming
point of the tank.
The figures displayed on the Screen are the values transmitted from Control Panel by
Communication Signal of RS232C. No change of figures is allowed in this Screen.
Those figures are displayed on the Screen of F2 Tank Arrangement-Cargo Tanks /
CA U TI O N
Ballast Tanks / Other Tanks / All Tanks.
To click Mouse pointing at Tab, “Received Data”.
Showing
STRUTURE
Tank Name.
OF FILE
Showing
Tank Level.
Showing
SPECIFICATION
Tank Temp.
at Higher
position.
Showing
Tank Temp.
at Lower
position.
START AND
Showing
QUIT
Tank
Pressure.
Showing
OPERATION
Independent
OF SCREEN
Alarm. Clicking this button, Screen will Screen will be scrolled.

return to the previous Screen before
“Received Data”.
SET-UP
ABBREVIATIONS
To be continued.
-48-
F2 TANK ARRANGEMENT
ARTICLE 5
PREFA CE
✦ When Independent Alarming is raised, (Alarm) will be shown.
✦ During no alarming, (None) will be shown.
☞ It will appear only for the case provided with an optional facility.
CA U TI O N
✦ If the communication signal, RS232C is not received for 1 (one) min. and more, the
Error Message will be displayed at the left bottom of Screen. When the Error
Message, is displayed, the wiring of Personal Computer or Control
Panel shall be checked, and recovery shall be tried.
When recovery is not completed, please inform to our Service Center, contact point
OF FILE
STRUTURE
of which is shown at “PREFACE, AT THE BEGINNING” on Page 4.
✦ If any trouble is occurred at the Detector, Sub-screen of Error Message will be
displayed.
When the Sub-screen of Error Message is displayed, please recover the
SPECIFICATION
Communication Error in reference with “About Error Message for Communication”
on the Screen of F2 Tank Arrangement-Cargo Tanks.
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-49-
F2 TANK ARRANGEMENT
ARTICLE 5
Received Raw Data Screen
PREFA CE
The Screen is to display the Data of Level, Temperature, Pressure and Loading
Condition at Alarming point of the tank transmitted from Control Panel by
Communication Signal of RS232C. These Data are always displayed on the Screen
during communication, and old Data will be replaced gradually with the latest Data.
CA U TI O N
To click Mouse pointing at Tab, “Received Raw Data”.
Screen will be
scrolled.
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
Clicking this button, Screen will Clicking this button, Clicking this button,
return to the previous Screen before character replacing on Pausing Screen will be
OPERATION
OF SCREEN
“Received Raw Data”. the Screen will pause. reset.

SET-UP
ABBREVIATIONS
To be continued.
-50-
F2 TANK ARRANGEMENT
ARTICLE 5
PREFA CE
CA U TI O N
displayed.
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-51-
F2 TANK ARRANGEMENT
ARTICLE 5
Trim/Heel Screen
PREFA CE
The Screen appears as Sub-screen displaying Trim, Heel, Drafts and summary of
Loading Cargo and Tank Contents, and will be shown at lower side of the Main Screen
which is one of F2 Tank Arrangement, F3 Bar Display, F4 Report of Capacity or F5
Tank Select.
In addition, detail of Draft information and summary of Strength calculation will be
CA U TI O N
displayed.
To click Mouse pointing at a part of Sub-screen of “Trim/Heel Screen” if located behind

of the Main Screen.
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
To click here.
The whole Sub-screen will appear.

SET-UP
ABBREVIATIONS
To be continued.
-52-
F2 TANK ARRANGEMENT
ARTICLE 5
① To display the condition of Drafts, Trim and Heel.
PREFA CE
Showing Fore. Draft corrected from reading of
Draft Gauge.
Showing Aft. Draft corrected from reading of

Draft Gauge.
CA U TI O N
Showing Trim, difference between Fore. and
Aft. Draft.
☞ Trim(m) ＝ Aft. Draft － Fore. Draft
Showing Port side Draft corrected from

reading of Draft Gauge.
OF FILE
STRUTURE
Showing Starboard side Draft corrected from
reading of Draft Gauge.
Showing Heel, difference between C.P. and

C.S.Draft in deg. .
SPECIFICATION
Showing the set result at F6 Initial Setting and
F7 Initial Tank Setting.
☞ Scrolling window.
Clicking here, Screen of “Strength” will

appear.
☞ If no LOADING COMPUTER is installed,
there is no display of this screen.
START AND
QUIT
Clicking here, Screen of “Draft Sketch” will
appear instead.
☞ At the time of no Draft Gauges, Fore Draft,
Aft. Draft, C.P. Draft and C.S. Draft, this
screen is not displayed.
OPERATION
OF SCREEN
Caution
All figures are displayed automatically, and unable to rewrite except Trim and Heel
which are able to rewrite in case of transmission trouble of Draft Data. Tank Level will
be corrected automatically using newly inputted data.
SET-UP
ABBREVIATIONS
To be continued.
-53-
F2 TANK ARRANGEMENT
ARTICLE 5
To click Mouse pointing at the Cell of Trim or Heel.
PREFA CE
To input new figure after placing cursor in the Cell colored in blue ( ).
To click here, and to input figure.

CA U TI O N
STRUTURE
OF FILE
SPECIFICATION
Caution
The Cell of Trim and Heel will be changed color to blue ( ) when it is clicked
Mouse pointing at During those Cell being colored in blue ( ) , Trim or Heel can
be set with new figure. Usually Tank Level and Volume will be corrected by Trim and
Heel using measured Draft Gauges.
START AND
☞ To click Mouse again pointing at the Cell colored in blue, and it will be changed to
QUIT
the colorless blank Cell ( ).

OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-54-
F2 TANK ARRANGEMENT
ARTICLE 5
Draft Sketch Screen
PREFA CE
The Screen is to display detail information about Drafts.
This Screen will appear only for the case provided with an optional facility to display
detail Draft Sketch in relation with Trim/Heel Correction.
No change of figures is allowed in this Screen.
CA U TI O N
To click Mouse pointing at a button of “Draft Sketch” on the Sub-screen of Trim/Heel.
Showing the Reading of Sea Draft at Draft Draft at Draft at

position of Level at Draft Marks corrected Referential Referential
Draft. Gauges in m. from reading in positions positions
m. corrected from calculated from
OF FILE
STRUTURE
reading in m. Loading Cargo
or Contents in m.
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
Clicking here, Screen will return to Those information on the Draft are
Sub-screen of Trim/Heel. composed in the Sketch.
SET-UP
About “Referential Position”
They are positions of Draft used for Trim & Stability Calculation, such as Aft.
Perpendicular (AP), Middle position (Midship) between Lpp, and Fore Perpendicular.
ABBREVIATIONS
-55-
F2 TANK ARRANGEMENT
ARTICLE 5
Shearing Force Screen
PREFA CE
The Screen is to display the Shearing Force as result of ship’s Strength Calculation,
based on present Tank Loading Condition and other dry stores.
This Screen will appear only for the case provided with an optional facility of Strength
Calculation in Loading Computer.
As to the detail, please refer to the Instruction Manual of Loading Computer.
CA U TI O N
To click Mouse pointing at a button of “Strength” on the Sub-screen of Trim/Heel.

Then, to click Mouse pointing at Tub, “Shearing Force” .
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
To click this Radio button for To click this Radio button for Clicking this button,
seeing Condition “In Port”. seeing Condition “At Sea”. Screen will return to
Trim/Heel Sub-screen.
ABBREVIATIONS
-56-
F2 TANK ARRANGEMENT
ARTICLE 5
Bending Moment Screen
PREFA CE
The Screen is to display the Bending Moment as result of ship’s Strength Calculation,
based on present Tank Loading Condition and other dry stores.
This Screen will appear only subject to the case provided with an optional facility of
Strength Calculation in Loading Computer.
CA U TI O N

Then, to click Mouse pointing at Tub, “Bending Moment”.
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-57-
F2 TANK ARRANGEMENT
ARTICLE 5
Shearing Force of Lng.B’hd Screen
PREFA CE
The Screen is to display the Shearing Force of Longitudinal Bulkhead as result of ship’
s Strength Calculation, based on present Tank Loading Condition and other dry stores.
This Screen will appear only for the case provided with an optional facility of Strength
Calculation in Loading Computer.
CA U TI O N

Then, to click Mouse pointing at Tub, “Shearing Force of Lng. B’hd”.
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-58-
F3 BAR DISPLAY
ARTICLE 5
The present Loading Condition of the tanks is displayed by Bar Graph in analog.
The Sub-screen of Trim/Heel is shown simultaneously at lower side of Main Screen,
PREFA CE
and setting of Trim/Heel can be done here.
Refer
As to setting of Trim/Heel, please refer to F2 Tank Arrangement-Trim/Heel Screen in
this Manual.
CA U TI O N
Cargo Tanks Screen
The Screen is to display Fullness Ratio of the present Loading Capacity in the Cargo
Tanks to Maximum Loading Capacity after the present Loading Capacity is calculated
from present Tank Level using Tank Table.
OF FILE
STRUTURE
this Screen.
SPECIFICATION
①
START AND
QUIT
OPERATION
OF SCREEN
SET-UP

return to Main Menu Screen.
ABBREVIATIONS
To be continued.
-59-
F3 BAR DISPLAY
ARTICLE 5
① To display present Loading Capacity.
PREFA CE
Showing Tank Name.
Showing Measuring system.
Showing raw Level by Ullage in m.

CA U TI O N
Showing Tank Fullness Ratio of planned Loading Capacity set on

the Screen of F7 Initial Tank Setting-Cargo Tanks to Maximum
Loading Capacity.
Calculated Capacity from corrected Level by Ullage in kL.

STRUTURE
Ratio of present Loading Capacity to Maximum Loading Capacity.

OF FILE
☞ Bar Graph shows the Ratio.
Green ( ) and yellow ( ) colored areas mean present tank

Capacity set on the Screen of F6 Initial Setting-Content S.G..
Purple ( ) colored area means that Level reaches Pre-alarming

SPECIFICATION
Level set on the Screen of F7 Initial Tank Setting-Cargo Tanks.
Red ( ) colored area means that Level reaches Alarming Level set
on the Screen of F7 Initial Tank Setting-Cargo Tanks.
Caution
START AND
QUIT
Alarm will be displayed by Alarming Color” when reached Pre-alarming point or

OPERATION
OF SCREEN

Please stop Buzzer, referring to “How to stop Buzzer” on the Screen of F2 Tank
Arrangement-Cargo Tanks.
SET-UP
ABBREVIATIONS
To be continued.
-60-
F3 BAR DISPLAY
ARTICLE 5
PREFA CE
CA U TI O N
displayed.
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-61-
F3 BAR DISPLAY
ARTICLE 5
PREFA CE
The Screen is to display Fullness Ratio of the present Loading Capacity in the Ballast
Tanks to Maximum Loading Capacity after the present Loading Capacity is calculated
from present Tank Level using Tank Table.
this Screen.
CA U TI O N
①
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT

OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-62-
F3 BAR DISPLAY
ARTICLE 5
① To display present Loading Capacity.
PREFA CE
Showing Tank Name.
Showing Measuring system.
Showing observed Level by Sounding in m.
CA U TI O N
Showing Tank Fullness Ratio of planned Loading Capacity set on
the Screen of F7 Initial Tank Setting-Cargo Tanks to Maximum
Loading Capacity.
Calculated Capacity from observed Level by Sounding in kL.
Ratio of present Loading Capacity to Maximum Loading Capacity.
OF FILE
STRUTURE
☞ Bar Graph shows the Ratio.
Blue ( ) colored areas mean present Tank Capacity set on the

Screen of F6 Initial Setting-Content S.G..
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-63-
F3 BAR DISPLAY
ARTICLE 5
Other Tanks Screen
PREFA CE
The Screen is to display Ratio of the present Loading Capacity in the OtherTanks to
Maximum Loading Capacity after the present Loading Capacity is calculated from
present Tank Level using Tank Table.
this Screen.
CA U TI O N
Refer
Tanks Screen” .
STRUTURE

OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN

SET-UP
ABBREVIATIONS
-64-
F3 BAR DISPLAY
ARTICLE 5
All Tanks Screen
PREFA CE
The Screen is to display Fullness Ratio of the present Loading Capacity in the All Tanks
to Maximum Loading Capacity after the present Loading Capacity is calculated from
present Tank Level using Tank Table.
CA U TI O N
To be Unit
of Loading
Capacity.
OF FILE
STRUTURE
To be Unit
of Fullness
Ratio.
To show
SPECIFICATION
present
Pressure of
Vapor Return
Line.
START AND
QUIT
OPERATION
OF SCREEN
Caution
No Alarming color for Pre-alarm or Alarm is shown on this Screen.
SET-UP
ABBREVIATIONS
-65-
F5 TANK SELECT
ARTICLE 5
Detail Loading Condition is displayed in this Screen for study of Loading or
Discharging.
PREFA CE

Refer
this Manual.
CA U TI O N
Tank Select Screen

The Screen is prepared to see the interested tank in detail.
STRUTURE
To click Mouse pointing Tab, “Tank Select”.

OF FILE
①
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN

SET-UP
ABBREVIATIONS
To be continued.
-66-
F5 TANK SELECT
ARTICLE 5
① To select the interested tank.
PREFA CE
To click Mouse pointing the Cell under the Column of “Select” for the interested
tank.
To click here, and to select
CA U TI O N
either “No Select” or
“Yes” which is displayed
alternatively by clicking
Mouse pointing at.
⇨
OF FILE
STRUTURE
Caution
SPECIFICATION
The Cell under the Column of “Content” shows the result of setting at the Screen of
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-67-
F5 TANK SELECT
ARTICLE 5
Loading Condition Screen
PREFA CE
The Screen is to display in detail the tank selected at the Screen of “Tank Select”.
To click Mouse pointing Tab, “Loading Condition”.

CA U TI O N
STRUTURE
OF FILE
SPECIFICATION
START AND
Clicking this button, Screen will Screen will be scrolled.

QUIT

OPERATION
OF SCREEN
Alarm will be displayed by “Alarming Color” when reached Pre-alarming point or

SET-UP
ABBREVIATIONS
To be continued.
-68-
F5 TANK SELECT
ARTICLE 5
PREFA CE
CA U TI O N
displayed.
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-69-
F5 TANK SELECT
ARTICLE 5
The Screen shows Loading Condition at “Loading” or “Discharging”.
PREFA CE
① ② ③ ④
CA U TI O N
STRUTURE
OF FILE
SPECIFICATION
Showing King of Cargo or Content in the

① PCL-C
selected at F5 Tank Select-Tank Select.
Showing Total Volume of selected Cargo or

Total Volume
START AND
② Content at F5 Tank Select-Tank Select.

(kL) ●In the example, showing Total Volume of
kind of Cargo, PCL-C.
QUIT
Showing Total Loading Rate of selected Cargo

Total L. Rate or Content at F5 Tank Select-Tank Select.
③ ●In the example, showing Total Loading
(kL/h)
Rate of PCL-C.
OPERATION
OF SCREEN
Showing longest working Time among tanks

with selected Cargo or Content at F5 Tank
Total Work. Time Select-Tank Select until reaching Alarming
④ Level.
(H)
●In the example, 3H 00Min is shown as
Rated working Time of Cot3P is the longest
with 3H 00Min.
SET-UP
Caution
As ③ Total L. Rate and ④ Total Work.Time are estimated an average time, certain
error comparing with actual tank condition may occur due to calculation of Average.
ABBREVIATIONS
To be continued.
-70-
F5 TANK SELECT
ARTICLE 5
To show detailed Loading condition at “Loading” or “Discharging”.
PREFA CE
⑭
⑬
⑫
①②③ ④⑤⑥ ⑦⑧⑨ ⑩⑪
CA U TI O N
Showing present Loading Level in the tank.
① O.Level(m) ●Assuming measuring system as Ullage.
② O.Capa.(kL) Showing present Loading Capacity in the tank.

Showing Fullness Ratio of Observed Capacity (② O.Capa.)
③ O./M.(%)
to the maximum loading Capacity (⑪ M.Capa.).
Showing remaining tank volume from present Loading
OF FILE
STRUTURE
Level to the next Alarming point.
At Loading, it is this
④ Remain.V(kL)
difference.
At Discharging, it is this difference.
⑤ L/D.Rate(kL/h) Showing Loading or Unloading rate.

Showing remaining time from present loading Level until
SPECIFICATION
the Alarming point.
⑥ R_Work.Time
At Loading, it is this
(H: Min) difference.
At Discharging, it is this difference.
Showing planned Loading Level set at the Screen of

⑦ F.Level(m) F7 Initial Tank Setting-Alarm Setting Level/Temp..
Showing planned Loading Capacity set at the Screen of

F.Capa.(kL)
START AND
⑧
QUIT
F7 Initial Tank Setting-Cargo Tanks.
F./M.(%) Showing planned Fullness Ratio of planned Loading

⑨ Capacity (⑧ F.Capa.) to the maximum Loading Capacity
(⑪ M.Capa.).
Showing maximum Loading Level.

⑩ M.Level(m) ●This value shows Sounding.
⑪ M.Capa.(kL) Showing maximum Loading Capacity.
OPERATION
OF SCREEN
⑫ Showing alarming point.
Showing present Loading Level in the tank.

Upper Bar graph shows the
⑬ Level from 0 to 10%.
Lower bar graph shows it from 0 to 100%.
Showing Fullness Ratio of present Loading Level to the

⑭ % deepest Loading Level, displayed at the Screen of
F2 Tank Arrangement-Cargo Tanks.
SET-UP
Caution
As ⑤ Total L/D. Rate and ⑦ F. Level are estimated an average time, certain error
comparing with actual tank condition may occur due to calculation of Average.
ABBREVIATIONS
-71-
F4 REPORT CAPACITY
ARTICLE 5
Loading Condition of the tanks are listed for each tank on this Screen.
PREFA CE

Refer
this Manual.
CA U TI O N
Cargo Tanks Screen

The Screen is to displays the List of Loading Condition of Cargo Tanks, and to serve for
printing List.
STRUTURE
OF FILE
①
SPECIFICATION
START AND
QUIT
②
OPERATION
OF SCREEN

SET-UP
ABBREVIATIONS
To be continued.
-72-
F4 REPORT CAPACITY
ARTICLE 5
① To display present Loading Capacity in the Cargo Tanks.
PREFA CE
☞ Input of figure is not allowed in this Screen.
Showing Tank Showing raw Level Showing corrected Showing calculated

Name. by Ullage in m. Level with S.G., Loading Capacity
Trim and Heel by from corrected Level
Ullage in m. in kL.
CA U TI O N
OF FILE
STRUTURE
SPECIFICATION
Showing colored Kind Showing corrected Level Showing Loading or Discharging
of Cargo set at F6 Initial with S.G. of Kind of Flow Rate in kL/h.
Setting-Content S.G.. Cargo or Content in m. ☞ Certain error may occur as
Average calculation.
START AND
QUIT
Caution

OPERATION
OF SCREEN
Cell of the tanks under the Column of “R.Ullage(m)” will be color in red ( ) when
Loading Capacity reaches planned Loading Capacity (O.Capa.) set on the Screen of F7
Initial Tank Setting-Cargo Tanks .
SET-UP
ABBREVIATIONS
To be continued.
-73-
F4 REPORT CAPACITY
ARTICLE 5

PREFA CE
CA U TI O N

displayed.
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-74-
F4 REPORT CAPACITY
ARTICLE 5
② To select to average the Flow Rate, and to indicate it at the column of “Rate”.
PREFA CE
To click Mouse pointing at one of the figures, 2, 4, 6, 8 or 10 under the scrolling
window, which shows sampling number.
Thereafter to click Mouse at Radio button of “Average”.
To click at one of To click at Radio
CA U TI O N
the figures. button.
OF FILE
STRUTURE
About “Sampling Number”
SPECIFICATION
It is a number to take average of samplings which are sent from Control panel via
communication signal, RS232C and stored in memory. Number of samplings is
selectable from 2, 4, 6, 8 or 10.
Caution
START AND
QUIT
If “Average” is not selected, those figures will be of standard, and showing average of
every 5 min.
“Average” and “Sampling Number” will be seen on the Screen of F4 Report of
Capacity-Cargo Tanks / Ballast Tanks / Other Tanks / All Tanks / Loading Tank
Selection.
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-75-
F4 REPORT CAPACITY
ARTICLE 5
③ “Report of Capacity” of Cargo Tanks will be printed when clicked button
PREFA CE
on the Screen of “Cargo Tanks”.

CA U TI O N
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-76-
F4 REPORT CAPACITY
ARTICLE 5
PREFA CE
The Screen is to displays the List of Loading Condition of Ballast Tanks, and to serve
for printing List.
CA U TI O N
①
OF FILE
STRUTURE
SPECIFICATION
②
START AND
QUIT
Refer
As to “Average” and setting of Sampling Number, please refer to the Screen of F4
Report of Capacity-Cargo Tanks. OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-77-
F4 REPORT CAPACITY
ARTICLE 5
① To display present Loading Capacity in the Ballast Tanks.

PREFA CE
☞ Input of figure is not allowed in this Screen.
Showing Tank Showing observed Showing corrected Showing calculated

Name. Level by Sounding Level with Trim and Loading Capacity
in m. Heel by Sounding in from observed Level
CA U TI O N
m. in kL.
STRUTURE
OF FILE
SPECIFICATION
Showing colored Kind Showing corrected Showing Loading orDischarging

of Content set at F6 Level with S.G. of Kind Flow Rate in kL/h.
Initial Setting- Content of Content in m. ☞ Certain error may occur as
S.G.. Average calculation.
START AND
QUIT
Cell of the tanks under the Column of “R.Sounding(m)” will be color in red ( )
when Loading Capacity reaches planned Loading Capacity (O.Capa.) set on the Screen
of F7 Initial Tank Setting-Ballast Tanks.
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-78-
F4 REPORT CAPACITY
ARTICLE 5
② “Report of Capacity” of Ballast Tanks will be printed when clicked button
PREFA CE
on the Screen of “Ballast Tanks”.
CA U TI O N
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-79-
F4 REPORT CAPACITY
ARTICLE 5
Other Tanks Screen
PREFA CE
The Screen is to displays the List of Loading Condition of Other Tanks, and to serve for
printing List.
Refer
CA U TI O N
Tanks Screen” .

STRUTURE
OF FILE
SPECIFICATION
①
START AND
QUIT

Refer
OPERATION
OF SCREEN

Report of Capacity-Cargo Tanks.

Cell of the tanks under the Column of “R.Sounding(m)” will be color in red ( )
when Loading Capacity reaches planned Loading Capacity (O.Capa.) set on the Screen
SET-UP
of F7 Initial Tank Setting-Other Tanks.

ABBREVIATIONS
To be continued.
-80-
F4 REPORT CAPACITY
ARTICLE 5
① “Report of Capacity” of Other Tanks will be printed when clicked button
PREFA CE
on the Screen of “Other Tanks”.
CA U TI O N
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-81-
F4 REPORT CAPACITY
ARTICLE 5
All Tanks Screen
PREFA CE
The Screen is to displays the List of Loading Condition of All Tanks to serve for
printing List.

CA U TI O N
STRUTURE
OF FILE
SPECIFICATION
Clicking this button, Screen will Pointing here, Screen

START AND
return to Main Menu Screen. will scroll.

QUIT
Refer
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-82-
F4 REPORT CAPACITY
ARTICLE 5
① “Report of Capacity” of All Tanks will be Print printed when clicked button
PREFA CE
on the Screen of “All Tanks”.
CA U TI O N
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-83-
F4 REPORT CAPACITY
ARTICLE 5
Loading Tank Selection Screen
PREFA CE
The Screen is to displays the List of Loading Condition of Cargo Tanks in detail.
☞ To display only the List of Cargo Tanks.
To click Mouse pointing at Tab, “Loading Tank Selection”.

CA U TI O N
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪
STRUTURE
OF FILE
SPECIFICATION
⑫
START AND
QUIT

OPERATION
OF SCREEN
Refer
SET-UP
ABBREVIATIONS
To be continued.
-84-
F4 REPORT CAPACITY
ARTICLE 5
① To select whether the same kind of Cargo or Content in each tank shall be
PREFA CE
accumulated.
To click Mouse pointing at the Cell under the Column of “Select”, “ON” or “OFF”
will be shown alternatively at every clicking.
To click here selecting
CA U TI O N
ON or OFF.
OF FILE
STRUTURE
Caution
When selected “ON”, Accumulation of same kind of Cargo or Content will be displayed
SPECIFICATION
on the Sub-screen of ⑫ “Loading Tank Selection” under Main Screen.
When selected “OFF”, Cell will be colored in pink ( ).
② To select whether Data transmitted via RS232C shall be used or manually inputted
Data shall be used to accumulation in Summery Table.
START AND
QUIT
To click Mouse pointing at the Cell under the Column of “Line”. “ON” or “OFF”
will be shown alternatively at every clicking.
To click here selecting

ON or OFF.
OPERATION
OF SCREEN
SET-UP
Caution
When selected “ON”, all displayed data for the tank will be based on the signal of
RS232C. When selected “OFF”, all data can be inputted manually except “Rate”, and
the Cell will be colored in pink ( ).
ABBREVIATIONS
To be continued.
-85-
F4 REPORT CAPACITY
ARTICLE 5
③ Tank Names of the ship are displayed.
PREFA CE
CA U TI O N
STRUTURE
Caution
OF FILE
Tank Names are fixed so that no rewriting is allowed.
④ To display planned Temperature.

SPECIFICATION

here for manual input.
START AND
QUIT
Caution
OPERATION
OF SCREEN
When displaying Communication Signal Data, Temperatures at lower position in the

tank are displayed.
SET-UP
ABBREVIATIONS
To be continued.
-86-
F4 REPORT CAPACITY
ARTICLE 5
⑤ To displayed observed, raw Level in m.
PREFA CE
CA U TI O N
OF FILE
STRUTURE
⑥ To show corrected Level with Specific Gravity of Cargo or Content, Trim and Heel
in m.
SPECIFICATION
START AND
QUIT
⑦ To display observed Capacity calculated from corrected Level in kL.
OPERATION
OF SCREEN

SET-UP
ABBREVIATIONS
To be continued.
-87-
F4 REPORT CAPACITY
ARTICLE 5
⑧ To show Volume Correction Factor for selected kind of Cargo or Content and
PREFA CE
planned Temperature in kL.

CA U TI O N
STRUTURE
⑨ To show Cargo Capacity at planned Temperature, 15 deg. C or 60 deg. F in kL.

OF FILE

SPECIFICATION
START AND
⑩ To show Loading or Discharging Flow Rate in kL/h.

QUIT
OPERATION
OF SCREEN
SET-UP
Caution
✦ Manual input is not allowed so that only Communication Signal Data are displayed.
✦ Certain error comparing with actual tank condition may occur due to calculation of
Average.
ABBREVIATIONS
To be continued.
-88-
F4 REPORT CAPACITY
ARTICLE 5
⑪ To show the Weight of Loading Cargo or Content in t.
PREFA CE
CA U TI O N
OF FILE
STRUTURE
⑫ Sub-screen is Summary Table showing Kind of Cargo or Content, Specific Gravity,
Observed Loading Capacity, Corrected Loading Capacity and Calculated Weight
at 15 deg. C or 60 deg. F for each kind of Cargo or Content indicated “ON” at the
Column of “Select”.
SPECIFICATION
Showing kind S.G. of Cargo Observed Corrected Total Weight
of Cargo or or Content at Loading Loading of Cargo or
Content. 15 deg. C or Capacity of Capacity of Content for
60 deg. F. Cargo or at Planned each kind of
Content. Temperature. Cargo or
Content.
START AND
QUIT
OPERATION
OF SCREEN
Caution
Manual input is not allowed so that only Communication Signal Data are displayed.
SET-UP
ABBREVIATIONS
-89-
F8 CALCULATION
ARTICLE 5
Clicking Mouse pointing at the button of “F8 Calculation” on the Control Menu Box or
pushing Function Key, F8 on the Computer, the Application Software will jump to the
PREFA CE
Screen of “Loading Calculation”.

The Application Software will jump to “Loading Calculation” subject to the case
provided with an optional facility.
As to the Screen operation of “Loading Calculation”, please refer to the Instruction
Manual of Loading Computer.
CA U TI O N
Main Menu Screen

Main Menu Screen of “Loading Calculation” will appear. Control Menu Box on Main
Menu Screen contains nine (9) items corresponding to Function Keys.
STRUTURE
OF FILE
To click Mouse pointing at the button of “F8 Monitor”.

SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
To click this button, then, Screen

willChange over to Screen of
“Loading Monitor”.
SET-UP
ABBREVIATIONS
-90-
F1 PRINT
ARTICLE 5
The Screen is to print the record of Loading Condition of Cargo or Content in the tanks.
And also Backup Data at every one hour may be printed.
PREFA CE
Printing of Data Screen
CA U TI O N
①
②
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
Clicking this button, selected Data Clicking this button, Screen will
at ① or ② will be printed. return to Main Menu Screen.
SET-UP
ABBREVIATIONS
To be continued.
-91-
F1 PRINT
ARTICLE 5
① To print present Loading Condition which is showing on the Screen.
PREFA CE
To click Mouse pointing at the Radio button of “Present Report”.
To click here.
CA U TI O N
Clicking Mouse pointing at the button of on the Screen of “Printing of

Data”, displayed “Printing of Data” will be printed.
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-92-
STRUTURE START AND OPERATION
5
PREFA CE CA U TI O N SPECIFICATION SET-UP ABBREVIATIONS

OF FILE QUIT OF SCREEN
ARTICLE
To be continued.
F1 PRINT
-93-
F1 PRINT
ARTICLE 5
② To select Backup Data at every one hour, and to print.
PREFA CE
To click Mouse pointing at the Radio button of “Present Report”.
To click here.
CA U TI O N
List of past record of Backup Data is displayed.
Clicking Mouse pointing at one of the Backup Data, then to click Mouse pointing
at the Load button of .
STRUTURE
OF FILE
To click here.
☞ Scroll bar will appear when filled up
Data.
SPECIFICATION
Clicked File Name will be listed here.
Clicking here, selected Backup Data is Clicking here, reading out of Backup
START AND
opened, and Screen will return to Data is suspended, and Screen will
“Printing of Data Screen”. return to “Printing of Data Screen”.
QUIT
☞ Loading Condition of Backup Data

will be displayed on “Printing of
Data Screen”.
OPERATION
OF SCREEN
Clicking Mouse pointing at the button of after returned to “Printing

of Data Screen”, displayed “Printing of Data” of displayed Backup Data will be
printed.
About “Backup Data”

SET-UP
It is the data sent from Control Panel via Communication Signal Data, RS232C
at every one hour, and stored in a File under the Directory, ¥Loading Computer
¥Monitor Data.
When number of File reaches, old file will be deleted automatically.
ABBREVIATIONS
-94-
F10 EXIT
ARTICLE 5
The Program will close down at the button.
PREFA CE
Clicking Mouse pointing at the button of “F10 Exit”.
CA U TI O N
To click here.
OF FILE
STRUTURE
Caution
SPECIFICATION
Alternatively, the Program can be closed down by pushing the function Key, F10 on the
Computer.
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-95-
OPERATION START AND STRUTURE
ABBREVIATIONS SET-UP SPECIFICATION CA U TI O N PREFA CE
OF SCREEN QUIT OF FILE
ARTICLE
5
-96-
ARTICLE 6
SET-UP
BEFORE SETTING-UP
INSTALLING THE SOFTWARE
UNINSTALL OF PROGRAM SOFTWARE

BEFORE SETTING-UP
ARTICLE 6
The Program is already set up on the Computer, it shall be carried out in accordance
with the following notice if it becomes necessary to set up because of trouble or renewal
PREFA CE
of the Computer.
1. Please read carefully SOFTWARE LICENSE AGREEMENT.

2. Please confirm whether the operating platform is satisfactory to the Software.
☞ Language of this Software is only applicable to English.
CA U TI O N
3. If reinstalling on the original Computer, please uninstall existing program first.

☞ As to uninstall, please refer to “Uninstall of Program Software”.
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-98-
ARTICLE 6
To proceed setting-up of the Program Software in accordance with the following
guidance.
PREFA CE
Please exit all applications before starting installation.
1 1. To click Start button, at the left bottom corner on the Task bar after
inserted CD- ROM into the computer’s CD-ROM driver.
☞ Start Menu will appear.
CA U TI O N
2. To click Mouse pointing at “Run”.
OF FILE
STRUTURE
SPECIFICATION
START AND
QUIT
To click here.
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-99-
ARTICLE 6
About “CD-ROM of the Program”
PREFA CE
The following notices shall be taken in your consideration about handling of CD-ROM
for setting-up.
1. To handle carefully so as not to be stained with fingerprint, dust, water drip or oil.
2. To keep it in the case or box so as to protect Data.
CA U TI O N
3. Not to put it close to the magnet or magnetized material.

4. Not to leave it exposing directly to the sun, or placing under high temperature and
high humidity.
STRUTURE
OF FILE
SPECIFICATION
START AND
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-100-
ARTICLE 6
2 To click Mouse pointing at the button of after clicking at “Setup.exe”
PREFA CE
on the list window by scrolling bar.
To click here.
Clicking Mouse here, Screen
CA U TI O N
will return to Desk Top.
Clicking this button, Default

driver of CD-ROM will be
selected.
OF FILE
STRUTURE
Reading-in of CD-ROM will start.
SPECIFICATION
START AND
Comfirming Screen of setting-up will appear. QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-101-
ARTICLE 6
3 To click Mouse Pointing at the button of .

PREFA CE
CA U TI O N
STRUTURE
OF FILE
SPECIFICATION
To click here. Clicking Mouse here, setting-up will suspend.

START AND
Confirming Screen of setting-up will appear.

QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-102-
ARTICLE 6
4
PREFA CE
To click Mouse at the button of 　　　 .
CA U TI O N
OF FILE
STRUTURE
SPECIFICATION
To click here. Clicking Mouse here, setting-up will suspend.
START AND
QUIT
Confirming Screen of setting-up will appear.
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-103-
ARTICLE 6
5 To click Mouse at the button of after confirming “List Window”
PREFA CE
being “Loading Computer” highlighted.

CA U TI O N
STRUTURE
OF FILE
SPECIFICATION
To click here. Clicking Mouse here, Screen will return to Desk Top.
START AND
QUIT
A set up is started.
OPERATION
OF SCREEN
SET-UP
Clicking here, setting-up will suspend,and Screen will

return to Desk Top.
ABBREVIATIONS
To be continued.
-104-
ARTICLE 6
6 To click Mouse pointing at the button of　　 .
PREFA CE
CA U TI O N
OF FILE
STRUTURE
SPECIFICATION
To click here.
START AND
QUIT
Setting-up has completed.
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-105-
ARTICLE 6
The Program Software shall be uninstall in accordance with the following guidance.
PREFA CE
1 1. To click Mouse pointing at the start button

☞ Start Menu will appear.
located lower left corner.
2. To click Mouse pointing at “Setting” to “Control Panel”.

CA U TI O N
STRUTURE
OF FILE
SPECIFICATION
START AND
To click here.
QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-106-
ARTICLE 6
2
PREFA CE
To double–click Mouse pointing at the icon of .
CA U TI O N
OF FILE
STRUTURE
To double-click here.
3 To click Mouse at the button of after clicking “Loading Computer”
SPECIFICATION
to highlight by scrolling bar.
☞ The button of will become active when “Loading Computer” is
selected in the scrolling window.
START AND
QUIT
OPERATION
OF SCREEN
To click here.
SET-UP
ABBREVIATIONS
To be continued.
-107-
ARTICLE 6
4 To click Mouse pointing at the button of when to uninstall the Program.
PREFA CE
CA U TI O N
STRUTURE
OF FILE
SPECIFICATION
To click here. Clicking Mouse here, Screen will return to Desk Top.
START AND
Confirming Screen of uninstalling will appear.

QUIT
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
To be continued.
-108-
ARTICLE 6
5 To click Mouse at the button of .
PREFA CE
CA U TI O N
OF FILE
STRUTURE
SPECIFICATION
To click here.
START AND
QUIT
Uninstalling of the Program has finished.
OPERATION
OF SCREEN
SET-UP
ABBREVIATIONS
-109-
OPERATION START AND STRUTURE
ABBREVIATIONS SET-UP SPECIFICATION CA U TI O N PREFA CE
OF SCREEN QUIT OF FILE
ARTICLE
6
-110-
ARTICLE 7
ABBREVIATION
ABBREVIATION
ARTICLE 7
The Abbreviation used in this Manual are explaind hereunder.
PREFA CE
A Aft. Draft After Draft

API American Petroleum Institute
C C Color
C. Capa. Corrected (Loading) Capacity
C. Level Corrected (Loading) Level
CA U TI O N
C.P. Draft Port-side Draft at Center (Midship)

C.S. Corrected Tank Depth in Sounding
C.S. Draft Starboard-side Draft at Center (Midship)
C.U. Corrected Tank Overhead in Ullage
D d draft marks
dw deadweight ton (tonne)
STRUTURE
F F./M. Final (planned)/Maximum

F. Capa. Final (planned) Capacity
OF FILE
F. Level Final (planned) Level

L L.C.G. Longitudinal Center of Gravity (from Midship)
L/D. Rate Loading/Discharging Flow Rate
Lng. B'hd Longitudinal Bulkhead
SPECIFICATION
M M. Capa. Maximum (Loading) Capacity

M. Level Maixmum (Loading) Level
O O./M. Observed/Maximum
O. Capa. Observed (Loading) Capacity
O. Level Observed (Loading) Level
P P.A.C. Pre-alarming Capacity
Press. Pressure
START AND
R R.S. Raw Tank Depth in Sounding

R. Sounding Raw Tank Depth in Sounding
QUIT
R.U. Raw Tank Overhead in Ullage

R. Ullage Raw Tank Overhead in Ullage
R_Work Time Remaining Working Time
Remain V. Remaining Loading Volum until Final Capacity
OPERATION
OF SCREEN
S S.G. Specific Gravity

S.G.C. Specific Gravity Correction
Set Capa. Set Capacity
T Temp. Temperature
Total L. Rate Total Laoding Rate
Trim C. Trim Correction
V V.C.F. Volume Correction Factor
SET-UP
V.K.G. Vertical Center of Buoyancy above keel

VCFCF Equivalent Volume Correction Factor for Chemical Loading
ABBREVIATIONS
-112-
MUSASINO CO.,LTD.
Head Office
1-2-15, Minami-Yukigaya, Ohta-ku, Tokyo, Japan
Post Code: 145-0066
TEL: +81-3-3726-4411 FAX: +81-3-3726-1557
E-mail: musasino@musasino.co.jp
URL: http://www.musasino.co.jp
Shirakawa Works
Izumizaki, Nishi-Shirakawa-gun, Fukushima, Japan
Post Code: 969-0103
TEL: +81-248-53-2821 FAX: +81-248-53-2976
E-mail: musasino@ruby.ocn.ne.jp

Instruction Manual For Loading Monitor

Uploaded by

Copyright:

Available Formats

Instruction Manual For Loading Monitor

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Instruction Manual For Loading Monitor

Uploaded by

Copyright:

Available Formats

Rev.

ARTICLE 2 STRUCTURE OF FILE

ARTICLE 4 START AND QUIT

ARTICLE 5 OPERATION OF SCREEN

ARTICLE 5 OPERATION OF SCREEN

INQUIRY OR CORRESPONDENCE ABOUT PRODUCT:

MUSASINO CO., LTD.

(after expiry of warrantee period)

The application program of LOADING MANUAL (hereinafter called as Program) is a

The User may not modify, reverse-engineer, reverse-compile or reverse assemble

4. Transfer and Lending

of the Program, and reserve the right of terminating agreement.

6. Duty after Expiration of Agreement

references of the Program.

If you do not follow to the Caution, it may result in fatal

If you do not follow to the Caution, it may result in

Mark calling Mark indicating Act. Mark to prohibit Act.

Not to locate at the oil-misty, wettish or dusty place.

When moving the Computer or the printer, disconnection of all

Not to obstruct a vent hole of the Computer and the printer.

Not to fit the equipment at the unstable place.

Not touch the plug by wet hand.

When connecting power supply cable or electric wire, power

(Common Folders) (Common Folders) ・Exe. Files of various

・Various Binary Files

(Common Folders) ・CSV File

1. Indication of Tank Level and Alarming

(Setting Range of Alarm: between 0 and 150 in deg.C.)

3. Indication of Tank Pressure and Alarming

5. Indication of Correction Factor of Float Buoyancy for difference of

8. Indication of Print out

1. Indication of Independent Alarming

3. Indication of Function of Loading Calculation

1. Start from on Task-bar.

☞ Then the Program will start.

“Monitor” icon will appear on the desk top.

Screen will be changed to the Main Menu Screen.

STRUTURE START AND OPERATION

OF FILE QUIT OF SCREEN

1. To click Mouse pointing at on the Control Menu Box.

Desk Top Screen will be displayed.

F7 INITIAL TANK SETTING

F1 To print the loading condition of various tanks, and to

print data back-up every hour.

F2 To display Tank Arrangement and Loading Condition.

F3 To display Tank Loading Amount in bar graph.

F4 To display Tank Loading Volume in table.

F5 To display Cargo Tanks’ Loading Condition in detail.

F6 To initial-set Loading Tanks.

F7 To set type of cargo, or type of tank contents, specific

F8 To jump to other application program, LOADING

F10 Quit of the application program, LOADING

To point at blank space, to click Mouse and to input remarks.

To input them here.

To point at radio button, and to click Mouse.

To click Mouse pointing

crew, its Center of Gravity from Midship and above keel.

To point at blank space, to click Mouse and to input calculated figures.

To input them here.

　　 “Monitor” icon will appear on the desk top.