Service Manual: DHT-S514

e Ver.
2
Please refer to the
MODIFICATION NOTICE.
SERVICE MANUAL
MODEL JP E3 E2 EK EA E1 E1K E1C
DHT-S514 P P
HOME THEATER SYSTEM
HOME THEATER SYSTEM (DHT-S514) consists of FRONT SPEAKER

and SUBWOOFER.
• For purposes of improvement, specifications and design are subject to change without notice.
• Please use this service manual with referring to the operating instructions without fail.
• Some illustrations using in this service manual are slightly different from the actual set.
e
D&M Holdings Inc.
S0807-0V02DM/DG1312 Copyright 2013 D&M Holdings Inc. All rights reserved.

WARNING: Violators will be prosecuted to the maximum extent possible.
Downloaded from www.Manualslib.com manuals search engine

Contents
ABOUT THIS MANUAL..............................................................3 8. Check D3.3V.......................................................................21
What you can do with this manual.............................................3 9. Check BT3.3V.....................................................................21
Using Adobe Reader (Windows version)...................................4 10. Check D.RF3.3V.................................................................22
SAFETY PRECAUTIONS...........................................................6 11. Check 3.3V..........................................................................22
NOTE FOR SCHEMATIC DIAGRAM..........................................7 11. Check H1.8V.......................................................................22
NOTE FOR PARTS LIST............................................................7 13. No sound is output from Rch..............................................23
TECHNICAL SPECIFICATIONS.................................................9 14. No sound is output from Lch..............................................23
15. No sound is output from Subwoofer...................................24
DIMENSION................................................................................9
BLOCK DIAGRAM SoundBar.................................................26
Precautions During Service...................................................10
Initializing This Unit..................................................................10 BLOCK DIAGRAM Subwoofer................................................27
DISASSEMBLY.........................................................................11 WIRING overvIEW ...................................................................28
1. MAIN PWB ASSY................................................................12 PRINTED WIRING BOARDS....................................................29
2. ANTENNA PWB ASSY........................................................13 SCHEMATIC DIAGRAMS (1/10)..............................................31
3. DWAM83-TB PWB ASSY....................................................13 AUDIO_FRONTEND_SWITCH................................................31
4. IR PWB ASSY.....................................................................13 DSP..........................................................................................32
5. BUTTONS PWB ASSY.......................................................14 HDMI........................................................................................33
6. SUB AMP and SMSC MODULE DWAM83-TB PWB..........14 MCU.........................................................................................34
7. SUB VOLUME PWB...........................................................15 POWER STAGE.......................................................................35
8. SMPS PWB.........................................................................15 POWER SUPPLY.....................................................................36
FIRMWARE UPDATE PROCEDURE.......................................16 Button.......................................................................................37
1. MCU firmware updating by USB.........................................16 IR ............................................................................................38
TROUBLE SHOOTING.............................................................19 Sub Woofer Volume.................................................................39
1. Check 24V...........................................................................19 Sub Woofer Main.....................................................................40
2. Check 5.2V..........................................................................19 EXPLODED VIEW SOUNDBAR...............................................41
3. Check 5V(SW5V)................................................................19 Sub-assembly VIEW ...............................................................42
4. Check BK5V........................................................................20 EXPLODED VIEW SUBWOOFER............................................43
5. Check ADC3.3V..................................................................20 Sub-assembly VIEW ...............................................................44
6. Check BK3.3V.....................................................................20
PACKING VIEW........................................................................45
7. Check 1.8V..........................................................................21

ABOUT THIS MANUAL
Read the following information before using the service manual.
What you can do with this manual
Search for a Ref. No. (phrase)

(Ctrl+Shift+F)
You can use the search function in Acrobat Reader to

search for a Ref. No. in parts lists.
1.Press Ctrl+Shift+F on the keyboard.

• The Search window appears.
Shift
Ctrl
2.Enter the Ref. No. you want to search for in the

Search window, and then click the Search button.
•A list of search results appears.
3.Click an item on the list.

• The screen jumps to the page for that item, and the
search phrase is displayed.

Using Adobe Reader (Windows version)
Add notes to this data (Sign) Magnify schematic / printed wiring

The Sign function lets you add notes to the data in board diagrams - 1
this manual. (Ctrl+Space, mouse operation)
Save the file once you have finished adding notes.
Press Ctrl+Space on the keyboard and drag the
[Example using Adobe Reader X] mouse to select the area you want to view.
On the "View" menu, click "Sign".
• The selected area is magnified.
• The Sign pane appears.
Ctrl Space
• When you want to move the area shown, hold

down Space and drag the mouse.
[Example using Adobe Reader 9]

On the "Document" menu, click "Sign". • When you want to show a full page view, press
Ctrl+0 on the keyboard.
Print a magnified part of the manual

The Properties dialog box and functions will vary depending on your printer.
1. Drag the mouse to magnify the part you want to print.
2. On the "File" menu, click "Print".
3. Configure the following settings in the Print dialog box.
• Properties
Click this button and check that the printer is set to a
suitable paper size.
• Page to print
Select the following checkbox.
"More Options" : "Current View"
• Page Sizing & Handling
Select the following checkbox.
"Size" / "Size Options" : "Fit"
4. Click the Print button to start printing.

Magnify schematic / printed wiring Magnify schematic / printed wiring
board diagrams - 2 board diagrams - 3
(Pan & Zoom function) (Loupe Tool function)
The Pan & Zoom function lets you see which part of The Loupe Tool function lets you magnify a specific
a magnified diagram is being shown in a separate part of a diagram in a separate window.
window.
[Example using Adobe Reader X]
[Example using Adobe Reader X] On the "View" menu, point to "Zoom", and then click
On the "View" menu, point to "Zoom", and then click "Loupe Tool".
"Pan & Zoom".
• The Loupe Tool window appears on the screen.

• The Pan & Zoom window appears on the screen.
[Example using Adobe Reader 9] [Example using Adobe Reader 9]

On the "Tools" menu, point to "Select & Zoom", and On the "Tools" menu, point to "Select & Zoom", and
then click "Pan & Zoom Window". then click "Loupe Tool Window".

SAFETY PRECAUTIONS
The following items should be checked for continued protection of the customer and the service technician.
leakage current check
Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the set is defective.
Be sure to test for leakage current with the AC plug in both polarities, in addition, when the set's power is in each state
(on, off and standby mode), if applicable.
CAUTION Please heed the following cautions and instructions during servicing and
inspection.
◎◎ Heed the cautions! ◎◎ Make a safety check after servicing!
Cautions which are delicate in particular for servicing Check that all screws, parts and wires removed or
are labeled on the cabinets, the parts and the chassis, disconnected when servicing have been put back in their
etc. Be sure to heed these cautions and the cautions original positions, check that no serviced parts have
described in the handling instructions. deteriorate the area around. Then make an insulation
◎◎ Cautions concerning electric shock! check on the external metal connectors and between
(1) An AC voltage is impressed on this set, so if you the blades of the power plug, and otherwise check that
touch internal metal parts when the set is energized, safety is ensured.
you may get an electric shock. Avoid getting an (Insulation check procedure)
electric shock, by using an isolating transformer Unplug the power cord from the power outlet, disconnect
and wearing gloves when servicing while the set is the antenna, plugs, etc., and on the power. Using a 500V
energized, or by unplugging the power cord when insulation resistance tester, check that the insulation
replacing parts, for example. resistance value between the inplug and the externally
(2) There are high voltage parts inside. Handle with exposed metal parts (antenna terminal, headphones
extra care when the set is energized. terminal, input terminal, etc.) is 1MΩ or greater. If it is
◎◎ C
aution concerning disassembly and less, the set must be inspected and repaired.
assembly!
Through great care is taken when parts were
manufactured from sheet metal, there may be burrs on
the edges of parts. The burrs could cause injury if fingers
are moved across them in some rare cases. Wear gloves CAUTION Concerning important
to protect your hands. safety parts
◎◎ Use only designated parts! Many of the electric and the structural parts used in the
The set's parts have specific safety properties (fire set have special safety properties. In most cases these
resistance, voltage resistance, etc.). Be sure to use parts properties are difficult to distinguish by sight, and the use
which have the same properties for replacement. The of replacement parts with higher ratings (rated power
burrs have the same properties. In particular, for the and withstand voltage) does not necessarily guarantee
important safety parts that are indicated by the z mark that safety performance will be preserved. Parts with
on schematic diagrams and parts lists, be sure to use safety properties are indicated as shown below on the
the designated parts. wiring diagrams and the parts list in this service manual.
◎◎ B
e sure to mount parts and arrange the wires Be sure to replace them with the parts which have the
as they were originally placed! designated part number.
For safety seasons, some parts use tapes, tubes or other
insulating materials, and some parts are mounted away (1) Schematic diagrams........Indicated by the z mark.
from the surface of printed circuit boards. Care is also (2) Parts lists........Indicated by the z mark.
taken with the positions of the wires by arranging them The use of parts other than the
and using clamps to keep them away from heating and designated parts could cause electric
high voltage parts, so be sure to set everything back as shocks, fires or other dangerous
it was originally placed. situations.

NOTE FOR SCHEMATIC DIAGRAM
WARNING:
Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
CAUTION:
Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis resistance check. If
the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the set
is defective.
WARNING:
DO NOT return the set to the customer unless the problem is identified and remedied.
NOTICE:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM / M=1,000,000 OHM
NOTE
ALL FOR PARTS
CAPACITANCE VALUES ARE LIST
EXPRESSED IN MICRO FARAD, UNLESS OTHERWISE INDICATED. P INDICATES MICRO-MICRO
FARAD. EACH VOLTAGE AND CURRENT ARE MEASURED AT NO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT
TO CHANGE WITHOUT PRIOR NOTICE.
NOTE FOR PARTS LIST

1. Parts indicated by "nsp" on this table cannot be supplied.
2. When ordering a part, make a clear distinction between "1" and "I" (i) to avoid mis-supplying.
3. A part ordered without specifying its part number can not be supplied.
4. Part indicated by "★" mark is not illustrated in the exploded view.
5. General-purpose Carbon Film Resistor in the P.W.Board parts list. (Refer to the Schematic Diagram for those parts.)
6. General-purpose Carbon Chip Resistors are not included are not included in the P.W.Board parts list.
(Refer to the Schematic Diagram for those parts.)
WARNING: Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
● Resistors
Ex.: RN 14K 2E 182 G FR
INSTRUCTIONS
Type Shape FOR
and per-
HANDLING
Power Resist-
ance
SEMI-CONDUCTORS
Allowable
error
Others AND OPTICAL UNIT
Electrostatic breakdown
formance
of the semi-conductors or optical pickup may occur due to a potential difference caused by
electrostatic charge during unpacking or repair work.
RD : Carbon 2B : 1/8 W F : ±1% P : Pulse-resistant type
1. Ground for Human

RC : Composition
Body
2E : 1/4 W
RS : Metal oxide film 2H : 1/2 W
G :
J :
±2%
±5%
NL : Low noise type
NB : Non-burning type
Be sure to wear a 3A
RW: winding
grounding
: 1 W
band (1 MΩ)
K : ±10%
that is properly grounded
FR : Fuse-resistor
to remove any static electricity that may be
charged on
RN : Metal film the body.
3D : 2 W M : ±20% F : Lead wire forming
RK : Metal mixture 3F : 3 W
2. Ground for Workbench
3H : 5 W
* Be sure to place a conductive sheet or copper plate with proper grounding (1 MΩ) on the workbench or other surface,
Resistance
where
1 8 the
2 semi-conductors are to be placed. Because the static electricity charge on clothing will not escape through
1800ohm=1.8kohm
the body grounding band,ofbe
Indicates number careful
zeros to avoid
after effective contacting semi-conductors with your clothing
number.
2-digit effective number.
1 R 2 1.2ohm
1-digit effective number.
<Incorrect> 2-digit effective number, decimal point indicated by R.
<Correct> Grounding Band
: Units: ohm
● Capacitors
Ex.: CE 04W 1H 3R2 M BP
Type Shape Dielectric Capacity Allowable Others
and per- strength error 1MΩ
formance
CE : Aluminum foil 0J : 6.3 V F : ±1% HS : High stability type

electrolytic 1A : 10 V G : ±2% BP : Non-polar type CBA
CA : Aluminium solid 1C : CBA
16 V J : ±5% HR : Ripple-resistant type
electrolytic 1E : 25 V K : ±10% DL : For change and discharge
CS : Tantalum electrolytic 1V : 35 V M : ±20% HF : For assuring high 1MΩ
frequency
CQ : Film 1H : 50 V Z : ±80% U : UL part
CK : Ceramic 2A : 100 V : - 20% C : CSA part Conductive Sheet or
CC : Ceramic 2B : 125 V P : +100% W : UL-CSA part Copper Plate
CP : Oil 2C : 160 V C : ±0.25pF F : Lead wire forming
CM: Mica 2D : 200 V D : ±0.5pF
CF : Metallized 2E : 250 V = : Others
CH : Metallized 2H : 500 V
2J : 630 V
* Capacity (electrolyte only)

2 2 2 2200μF 2 R 2 2.2μF
Indicates number of zeros after effective number. 1-digit effective number.
2-digit effective number. 2-digit effective number, decimal point indicated by R
･ Units:μF. ･ Units:μF.
* Capacity (except electrolyte)
2 2 2 2200pF=0.0022μF 2 2 1 220pF
Indicates number of zeros after effective number. (More than 2) Indicates number of zeros after effective number. (0 or 1)
2-digit effective number. 2-digit effective number.
･ Units:pF ･ Units:pF
･ When the dielectric strength is indicated in AC,"AC" is included after the dielectric strength value.

Personal notes:

TECHNICAL SPECIFICATIONS
Frequency Range: 40Hz to 20kHz
High Frequency Drivers: 35/64” (14 mm) tweeter x 2
Mid Frequency Drivers: 2 1/64 x 5” (51 x 127 mm) HHRT drivers x 2
Low Frequency Draivers: 5 15/64” (133 mm) woofers x 2
Dimensions: (HxWxD)
Sound bar 3 9/64 x 39 17/32 x 3 5/64” (79.8 x 1004 x 78.3 mm)
Subwoofer 12 21/64 x 6 3/4 x 13 5/8” (313 x 171.5 x 346 mm)
Wireless Technologies:Bluetooth 2.1 + EDR, A2DP, APT-X
2.4/5.2/5.8 GHz triband frequency hopping (subwoofer)
Rating Voltage: AC 120 V, 60 Hz(E3) / AC 230 V, 50/60 Hz(E2)
Power consumption:
Sound bar DC 24 V, 2.5 A
0.5 W or less (Standby)
Subwoofer 60 W
Weight:
Sound bar 2.3 kg
Subwoofer 5.9 kg
DIMENSION
Unit : mm
1004 78.3
79.8
171.5 346
313

PRECAUTIONS DURING SERVICE
Initializing This Unit
Initialize this unit if you have replaced the microprocessor, one of the parts around the microprocessor, or the digital PCB.
1. Unplug sound bar from wall.

2. Hold down the "Vol – (minus)"."
3. Plug into power again.
4. Standby button light will blink fast for several seconds indicating that the system has been reset.
5. Clears Bluetooth pairing, remote learning, audio mode.
VOL -
Service Jigs
The following jigs are used when updating this unit. (Not supplied)
USB cable : A-Mini B : 1 Set

(See 16 page.)
The following jigs are used when removing the Sub-woofer PWB.
Request service from your dealer if necessary.
978559100040D : Clip release jig : 1 Set

(See 14 page.)
10

DISASSEMBLY
• Remove each part in the order of the arrows below.
• Reassemble removed parts in the reverse order.
• Read“ SAFETY PRECAUTION” before reassembling removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing
thework. Failure to shape the wires correctly may cause problems such as noise.
Sound Bar
SOUNDBAR REAR PLATE
MAIN PWB ASSY

Refer to "DISASSEMBLY
1. MAIN PWB ASSY"
and "EXPLODED VIEW"
MAIN PWB ASSY
(Ref. No. of EXPLODED VIEW : 25 )
CABINET
ANTENNA PWB ASSY DWAM83-TB PWB ASSY

Refer to "DISASSEMBLY Refer to "DISASSEMBLY
2. ANTENNA PWB ASSY" 3. DWAM83-TB PWB ASSY"
and "EXPLODED VIEW" and "EXPLODED VIEW"
PWB ANTENNA PWB SMSC MODULE DWAM83-TB
(Ref. No. of EXPLODED VIEW : 39) (Ref. No. of EXPLODED VIEW : 10)
IR PWB ASSY BUTTONS PWB ASSY

4. IR PWB ASSY" 5. BUTTONS PWB ASSY"
PWB IR PWB IR
Subwoofer
GRILL SUB REAR PLATE
SUB AMP PWB ASSY

Refer to "DISASSEMBLY
SUB VOLUME PWB ASSY SMPS PWB ASSY
6. SUB AMP and DWAM83-TB
PWB ASSY"
7. SUB VOLUME PWB ASSY" 8. SMPS PWB ASSY"
and "EXPLODED VIEW"
SUB AMP PWB ASSY
PWB SUB VOLUME PWB SMPS
SMSC MODULE DWAM83-TB ASSY
11

Explanatory Photos for“ DISASSEMBLY”
• The angles from which the photos are taken are shown by “Photo angle: A, B, C, D“ .
• See the diagram below about the shooting direction of each photograph.
• Photographs with no shooting direction indicated were taken from the top of the set.
The viewpoint of each photograph
(Shooting direction)
[View from the front]

Shooting direction: B
(Rear side)
Shooting direction: D
(Top side)
Shooting direction: C
(Bottom side) Shooting direction: A
(Front side)
1. MAIN PWB ASSY

Proceeding : REAR PANEL → MAIN PWB
(1) Remove the screws.
Shooting direction B (Rear side)
(2) Remove the connector wires and remove the antenna connector.
Connector wires
Shooting direction D (Top side)
Antenna connector
(3) Remove the FFCs.
Shooting direction C (Bottom side)
FFC
12

2. ANTENNA PWB ASSY
Proceeding : REAR PANEL → MAIN PWB → CABINET → ANTENNA PWB
Shooting direction B (Rear side)
(2) Remove the cabinet.
Remove the Sillicon Feet

Remove the Sillicon Feet
ANTENNA PWB
Shooting direction C (Bottom side)
3. DWAM83-TB PWB ASSY

Proceeding : REAR PANEL → MAIN PWB → CABINET → DWAM83-TB PWB
(1) Remove the FFC and remove the screws.
Remove the Waddings.
FFC
4. IR PWB ASSY
Proceeding : REAR PANEL → MAIN PWB → CABINET → IR PWB
13

5. BUTTONS PWB ASSY
Proceeding : REAR PANEL → MAIN PWB → CABINET → BUTTONS PWB
(1) Remove the FFC and remove the screws. Then remove the buttons PC.
FFC
Shooting direction D (Top side)
BUTTONS PC
6. SUB AMP and SMSC MODULE DWAM83-TB PWB

Proceeding : GRILL → SUB AMP and DWAM83-TB PWB
(1) Remove the grill. Remove the screw, then remove the subwoofer.
(2) Remove the connector wires. Remove the SUB AMP and DWAM83-TB PWB from clip.
Remove the AMP PWB
Insert Jig.
Pull up PWB.
14

7. SUB VOLUME PWB
Proceeding : SUB REAR PLATE → VOLUME PWB
(2) Remove the screws and the volume knob. And remove the connector wire.
8. SMPS PWB
Proceeding : SUB REAR PLATE → SMPS PWB
(1) Remove the connector wires. Remove the PWB form clip.
See 14 page
15

FIRMWARE UPDATE PROCEDURE
1. MCU firmware updating by USB
1.1. Items to Be Prepared
• Windows PC
• USB cable (A-Mini B)
• Copy ‘D&M Group Soundbar Flash Programmer’ application in your PC.

• Copy the two update files in the same folder on your PC.
• The update files are HEX file and MAP file.
******. Hex
******.map
1.2. Firmware update procedure

(1) Leave the soundbar AC unplugged, Hold the Standby Button and plug in the USB on the rear to the PC
(2) Start ‘D&M Group Soundvar Flash Programmer’ application in the PC, and press ‘Connect’ button.
(3) Select the region in region pull-down menu( ‘US/CN/EU’ or ‘ Japan’).
16

(4) Press ‘Load Hex file’ button. and load the HEX file(update file).
(5) Press “Erase-Program-Verify” button to start the F/W update.

When the update completes, the application shows “Programing completed Verification successful“
(6) Press “Bootloader Ver” button, and verify the MCU F/W version and region.
17

(7) Press “Disconnect” , and disconnect USB cable.
18

TROUBLE SHOOTING
Check the each voltage
1. Check 24V
Start (MAIN PWB)
NO
Check the voltage pin 1 of J5 conector.
Replace the AC Adaptor.
Is the voltage in the specification? (24V±10%)
YES
Finish
2. Check 5.2V
Start (MAIN PWB)
Check the input voltage 5 pin of U27. NO

Check the soldering of the L45.
YES
Is a PWM being output from 6 pin of U27? NO 1. Check the soldering of D7, D9, C294, L43, R230, R231
and R232.
2. Check the soldering of the U27.
YES
Finish
3. Check 5V(SW5V)
Start (MAIN PWB)

YES
NO 1. Check the soldering of D8, C315, C316, L46, R235, R236

Is a PWM being output from 8 pin of U29?
and R2383.
2. Check the soldering of the U21
YES
Finish
19

4. Check BK5V
Start (MAIN PWB)

Check the soldering of L44.
YES
Is the 5V output from 5 pin of U23? NO Check the soldering of the U23.
YES
Finish
5. Check ADC3.3V
Start (MAIN PWB)

YES
Is the 3.3V output form 5 pin of U25. NO Check the soldering of the U25.
YES
Finish
6. Check BK3.3V
Start (MAIN PWB)

Check the soldering of the D6.
YES
Is the 3.3V output form 3 pin of U26? NO Check the soldering of the U26.
YES
Finish
20

7. Check 1.8V
Start (MAIN PWB)

Check the soldering of L47, Q11, R262, Q12 and R263.
YES
Is the 1.8V output from 2 or 4 pin of U28? NO Check the soldering of the U28.
YES
Finish
8. Check D3.3V
Start (MAIN PWB)

YES
Is the 3.3V output form 2 or 4 pin of U30? NO Check the soldering of U30.
YES
Finish
9. Check BT3.3V
Start (MAIN PWB)

YES
Is the 3.3V output from 2 or 4 pin of U34? NO Check the soldering of U34.
YES
Is the 3.3V output form +side of C334? NO Check the soldering of L50 and R239.
YES
Finish
21

10. Check D.RF3.3V
Start (MAIN PWB)

YES
YES
Finish
11. Check 3.3V
Start (MAIN PWB)

Check the soldering of L47.
YES
YES
Finish
11. Check H1.8V
Start (MAIN PWB)

Check the soldering of U32.
YES
YES
Finish
22

13. No sound is output from Rch
Start (MAIN PWB)
Check the input signal 4, 5, 10 and 11 pin of U19. NO

Replace Main PWB.
Is the audio signal being input?
YES
Check the output signal 21, 23, 27 and 29 pin of U19. NO Check the soldering of U19.
Is a PWM being output?
YES
Check the output signal between 1 and 2 pin of J5, between NO Check the soldering of C200, C209, C210, C220, L35, L36,
3 and 4 pin of J5. L37 and L38.
Is the audio signal being output?
YES
Replace the speaker unit.
Finish
14. No sound is output from Lch
Start (MAIN PWB)
Check the input signal 4, 5, 10 and 11 pin of U21. NO

Replace Main PWB.
YES
Check the output signal 21, 23, 27 and 29 pin of U21. NO Check the soldering of U21.
YES
Check the output signal between 1 and 2 pin of J6, between NO Check the soldering of C250, C258, C261, C268, L39, L40,
3 and 4 pin of J6. L41 and L42.
YES
Finish
23

15. No sound is output from Subwoofer
Start (MAIN PWB)
Check the input signal 20,21 and 22 pin of IC2. NO

Replace Main PWB.
YES
Check the output signal 39 and 46 pin of IC2. NO Check the soldering of IC2.
YES
NO
Check the output signal between 1 and 2 pin of J2. Check the soldering of L4, L5, FB2 and FB4.
YES
Finish
24

Personal notes:
25

BLOCK DIAGRAM SOUNDBAR
Wireless module
DWAM83 CU
H
BT
26

BLOCK DIAGRAM SUBWOOFER
SMPS MCU UI
IC1
VDD MCU LED
R5F211B4
Vol
24V
Power
IC51 VDD W Wireless module D.AMP
TPS54331 DWAM83 MA IC2 Speaker
TAS5711
VDD MCU
IC3 Speaker
LD1117_3.3 HV
VDD W
IC4
LD1117_3.3
HV
Q4
UT4411
27

WIRING OVERVIEW
SOUNDBAR
Speaker Speaker
Antenna PCB
4P 4P
Wire 1P shield
Wire
MAIN PCBA Ass'y
15P 26P
FFC FFC
SUBWOOFER
SUB Volume SMSC

PCBA Ass'y (Wireless)
SMSC(Wireless) PCB MA
BUTTON PCBA Ass'y PCB CU

3P
Wire
6P
wire 26P
FFC
IR PCBA Ass'y
2P Wire
SUB AMP PCB Ass'y
SMPS with clip
Speaker Speaker
28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PRINTED WIRING BOARDS

Lead-free Solder
A When soldering, use the Lead-free Solder (Sn-Ag-Cu). A
SOUND BAR MAIN (A SIDE)

B B
C325 C328 C326 C329 R263 R264

C42 C307 TH1 C313
C310
R81R83 R64 U34
Q12
R78 R97
U8 C37
J7
R229 R228
C331
L13
R
C43
C74
99
Q8
R262
1
C311
R261 R149
C252
R227 R226
R188
U1
U36 R210
U32 R164
3
C198 R171 C245 R195

U28
R153 R206
C195
U33 Q11 C293
C218 C224 C254
C223
C244
C202 C266
C270
C271
C267
C318
C243 C251
C71
C197 C201 C213 C222 C269

C72
C264
C332 L36 C199 C214 L37 L39 L40 L41
C319
1
C324 C327 L42

10
L38 C312
C C
R
L50
R29
D7L48
L8
C44
L52 L51 C76 C306 L45

U24
L47 CN5
C57 R239 L14
C301
C66 L7 C300 J1
L46 C308 C298
C352
C61
C354
R265
C320
C333 R37 C59 C80

R225
D3 U7
C56
C58
C161 C334 C353 C355 R224

R34 C356
C41 U27 R27
D11
L31 L9 D8 C196 C225 C242 C273

D12 C309 R23 C36
R231 R230
R28
R36 C67
C69 C62
C68 C63
U30 C52 C77 R235 U5

C337
L35 C226 U6 R26
R150
R46
R41
R190
R45
R43
R44
R32
L25
R169 R209
C294
R232
C48 C40 R63 C205 R152 R166 C216 C255 R194 R208 C265
2
R238
C
L3
C38 C127
16
L3
R31 C200 C209 C211 C220 C250 C258 C261 C268 D9
R40
R42
C53
4
R236 L43
7
R88
2
L2
C47 C54 R66
R25
13
C122 R272 TP5

R240
C
C338 R30 C133 U10 C279

R33 R39 C45 C81 C193 C228 C240 C280 C299
C34
C35
R76
R77
C84 L15 C33

C348
C49 R24
C347
R242 C39 R254
C305
R21
C 18
C315
C316
C241
RN1
18 4
C339 R241 R271 C227 C297 R20

C
C51 C50 C46 C55 C194 OPT1

R8
7
C239 C277 U4
C1
U29
0
U21 C292 R22

R
L12
C296
C291
RN2 C192
34
L4
L17
84
C357 R270
R 03
C317 R268
10
U19
R
R1
L5 C87
C
R237
2
79
L11 R121
C90 C314 C295 C32

18 5
R124
CN2
C10
U25 C9
C
L18 R180
18
D L49 D
C
C91
1
R117
R186
R10
C171
16
R7
R8
R148 C272
R7 10
C170 R269 L44

5
C260
R49 R158 C31C30
3 7
R147 R202
R
SW2
R161
R112 RN7
L16 C290
R62
R50 R187
R 109
L2
L34
L26
U2
10
L19 U38 C247

R
Y3 C182
8
R200
C207
C190
C204
C151
C14
C257
C16
C17
C217
U35 C85
D4
C342
C92
C180 C181
U11
R111C172 R54 R252 L53

L33 C212 R172 C233 C253 R189 C256 R1
L20 C93 R151
R56
J4 R211 C281
R58
C13
R60
R9
RN8 C210 R155 R250 R191 R192
R113
R47 R174 R173 R203 R213 R212
R193
R156
R154 R167 R165 R183 R184 R204 R205 R222 R221
C276
5 1
C289
C230
2
C248
C6 R2
C2
C95 R168 R185 C235 C259 R207 R223 C283 R215
R86
R92
R95
R120
C215 R170 R197

R98
D10
R55
R196
U16
C206 R159
D14 R48 R157
DHT-S514 Main V3.0 R176 C5
4
C287
CN1 RN3 C246 C274
C1
LRMA02880-0001
R3
C203
R5
C350 C229 C191
U15 R61 C321
C188
R146
R257 Q9 2013-11-8 L21 C285
R258 R122 C99 C219 R145 C262
R256 C98
C8
C237
R6
1
R128
C349 U23 C288

R129
C79 C286 R219
C27
C28
C29
C22
C25
R163 R181 C189 R201 C4
PJ2 R255 U31 C221 C238 C263
5
C278
C7
C21
L22 C284
C323
R220 C23 C24
C3
R182
C322
C208
R118 C236
R4
3
R244 R119 L1
C249
R198
R217
U22 R19 C26
E E
R259 Q10 C231 PJ1
R160
R178
C232
R67 U20 R214
R253
C282
R216 C275
R175
R251
C234
R35 R177
C351U37 R260
F F
SOUND BAR MAIN (B SIDE)
G G
TP25 TP27 TP28 TP30 C11 R13R245
R68
C364 CN4 D_RF_3.3V TP26 TP47 TP29 TP31

1
R69
C20
D2
R15
R12
R18
TP2
C15
L23 16 1
CN3
R114
R70
R14
R16
26 R71 R65
U1
C365
TP32 R267
R116
C174
R74
C19
C335
C360
C358 C366 RN4
C336
C183 TP33 C169

C175
R110
C361
D15
R72
USB_P
C367
R75
C359 C168
USB_N C173
U14 C18
R17
L54
R96
C12 R11
R93
U12
TP3
TP34 TP11
BK5V
C94
H H
R90 R94
D5 TP8 TP38
TP1
TP9
C153
C100
R59
C176
C178 TP10
R91
R53
C97
C96
L29 C152 R52 ADC3.3V

C340 TP37 TP7
C177
C179
R57
C341
4
R51
R87
12
C
TP6
R89
C88
C
15
C89
Q2
8
C86
L10
3
12
R249
C
C83
L3
85
0
C73
R
17 8
C1 11
C82
C
15 4
9
C 15
5
C 1
2
5 C1
C
C75
1
Pair
1
12126
C60
5 C
C
11 6
GND1 MOSI1
C 11
C64R38
C70
C65
C
2
12 8
16
C78 TP36
50 9 1C 12
9
C
C 15
3 0C
15 6
C
C1 13
CSB1
J J
9
8
7
04
10
C
10
L2
3
16
R1
5
C
C
C1 14
0
CLK1
C 16 110
TP4
8 C
10
C346
C1 10
R
14 7
C
C42 1C
07 8
1C 14
C344 TP35
15 0
1 4
MISO1
12 0C
0C C1
9
C 2
14 39
06 C1
C345
VCC1
2C C1
5
C1 10
3.3V
4 10 01
SW_5V
45 6C
11 C 3C1
C1 14
D3.3V
8 11
H1.8V DBT3.3V
44 3C
1 7C
C1 14
TP40 TP41 TP43 TP44 TP45 HV

C 13
C
C
3
6 C
DC IN
13 35
4C C1
J5
J6
10 3
C 10
C
C111 1.8V 4 1 4 1
L24 TP39 TP42 TP46
K K
L L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
29

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
SOUND BAR IR (A SIDE) SOUND BAR ANTENNER (A SIDE)

SOUND BAR BUTTON (A SIDE)
TVEE 28 Antenna Board

LD2 R14 LD1
LD7 LD6 LD5 LD4 LD3 LGCA03230-0001 C8
SW5 SW8 Ver 2.0
B LD8 SW3
R9 SW6 SW7 R13
IR1 B
SW4
1
R12
IR2
R10
SW1
R8
SW2 R7 R6
C3 R11 SRS
R5
Learn BT input
R2
TV input
R1
Standby
Vol+ Vol- Mute C2
R4 C4 R3
R35 TVEE 28 IR Board
1
APEA02900-0001
C1
Ver 2.0
CN3 TVEE 28 Buttons Board
LFCA02890-0001
Ver 3.0
C C
SOUND BAR IR (B SIDE)
SOUND BAR BUTTON (B SIDE)
TP5
D D
TP3
TP4 TP2
1 6
TP1
CN1
E E
F F
SUB WOOFER (A SIDE) SUB WOOFER (B SIDE)
G
SUBWOOFER VOLUME (A SIDE) G
L6 R50
TH1
2 1
C56
C65
C66
C41
C69 ZD1
C64
J1 C51 R46 B1
R49
FB5 C57
6
R47
1
IC5
IC4
TVee28 Subwoofer Main
R34
R43 C70
LED1
C68
C62
C58
C53
Q4
C52
R53
R52
C73
VR1
C72
LFMA02910-0001
H C67 H
1
R51
SW1
L3
C71
DHT-S514 Sub vol v3..0

R39
R48
LFCA03070-0001 IC3
1
Q6
20131106
2013-11-06
1
Q5
CN1
Ver 3.0
R9
R4
EC1 C293 C63
EC2
C5
R229
C60
C35 Q2
C59
R35
R41
R38
Q1
C50
C26
C2
R45
L5 Q3
J J
CN1
C4
R12
C61
C27 FB3
R23
FB1 IC1 R25

C55
C6
C46
C47
C49
C54 R17
C43
1
C48
C40 R18
J2
R42
C37 R44 C39

IC2
2
FB4
C34 C36 R16 R19 C1 R20 CN2

R21 C3
C42
C31 C30 R40 C44

K C38 R15 K
R24 R22
FB2
26
C32 R13
C20
R11
1
C21 C28
C23 C33 R10 R1
C29 1 R37 R6 R8
R33
R32 R7
R27
R31
C19
C15
C17 R36
R3
C22
R133
R26
C18
C45
C25
R28
C14
L1
C74
C24
C9 R2
C12
1
C11
C78
C13 R30
C7 C10
L L
C77
C75
L4
C76
U7 CN3
EC3
C16
R29
1
C8 L2
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
30

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
B B
PJ1 TP1
1
R1
3
C2 R2 100R0402 C1
5 R3
100pF R-IN AIN0 0R
4 R254
50V R4 100R0402 0603
2 12K ADC_SYS_24576
C3 1uF
R5 0402 A-GND GND 330R
100pF 16V C347 C348
0.5A A-GND C4 C5 100K C6 0402
K3J13B-5S 50V 10pF 10pF
100pF 100pF 0402 18pF
C 50V 50V C
TP2 50V 50V 50V 512*Fs, I²S Mode
GND GND
A-GND A-GND
A-GND
R6
R7
I²C Address: 0x98
100K C7 ADC_LRCLK
0402 R9 C8 18pF R8 51R
ADC_SCLK
L-IN 50V AIN1 R10 51R
ADC_SDATA
GND 51R
12K
ADC
1uF
0402 ADC_POWER
16V
U1B
C9 C10
6 10uF 100nF
D 7
R11
C12 6.3V 16V D
48
47
46
45
44
43
42
41
40
39
38
37
5 1uF
U2
16V
47K
LM358AM
OVFL
LRCK
INT
VD
DGND
MCLK
SCLK
NC
NC
NC
NC
SDOUT
BK3.3V 0402 GND GND
C11
R245 R13
BK3.3V 1 36 ADC_POWER
R12 SDA-DSP SDA/CDOUT VLS
47K 47K ADC3.3V 2 35
10K 1uF L53 SCL-DSP SCL/CCLK NC
0402 0402 ADC_POWER 3 34
0402 16V GND AD0/CS NC C13 C14
4 33
U1A 600R@100MHz AD1/CDIN NC 10uF 100nF
5 32
VLC AGND
4
3 A-GND LM358AM TP3 6 31 6.3V 16V

R14 ADC3.3V nRESET RST NC
C15 1 AUTO ON DET-1 7 30
-
E R15
2
+ AUTO ON ANALOG C16 C17 D10 8
AIN3A NC
29 E
2.2K R16 R17 10uF 100nF SJD12A05L01 AIN3B PGAOUTB
C18 9 28
2.2K 0402 560R 10M 6.3V 16V SOD-123 AIN2A PGAOUTA
8
1uF VCC 10 27 AIN0
AIN4B/MIC1N2
AIN4A/MICIN1
0402 1uF / NC AIN2B AIN6B
16V R18 0402 0603 11 26 AIN1 GND
16V AIN1A AIN6A
12 25
C19 AIN1B MICBIAS
475K GND GND
AFILTA
AFILTB
AIN5A
AIN5B
AGND
100nF
FILT+
0402 GND
16V D2 A-GND A-GND
VA
VQ
VQ
NC
BZX84C5V1
C20
A-GND CS5346-CQZR
13
14
15
16
17
18
19
20
21
22
23
24
BK5V
GND
100pF
F BK5V L1 R19 F
600R@100MHz 4.7R C21 C22 C23 C24 C25
0603 C26 C27 10uF 100nF 22uF 22uF 100nF
AUTO ON DET-2 10uF 100nF 6.3V 16V 6.3V 6.3V 16V
AUTO ON OPT 6.3V 16V
BK3.3V R20
1K GND GND GND GND GND
GND GND C28 C29
L2 2.2nF 2.2nF
600R@100MHz 16V 16V
G G
ADC3.3V GND GND
C30
OPTICAL INPUT C31 TP4
5
OPT1 10uF 0.1uF

16V R21 R22
1 2 + 4
V_OUT SPDIFRX
2
-
GND 100R C32 100R
3 C33
VCC 0.1uF
3
4 47pF
NC 16V
1
5 50V
NC
6 SEL_COAX/OPT
NC U4
7
H
NC GND R23
GND 74LVC1G125GV H
DLR1160
1M / NC BK3.3V
0603
COAX INPUT
J1 C34
ADC3.3V C35
1 0.1uF
16V
R24 0.1uF
3 10K 1 GND5
NC VCC GND
5
C36 0603 U5
R25
2 2 2 + 4
A -
J 2A R260.1uF R27 3
GND Y
4
100R 74LVC1G126GV J
3
HPJ-032-03A-W 75R16V 10K SEL_COAX/OPT

1
0603 U6
NC7SZ04M5X R28
1K GND
GND GND
AUTO ON COAX
K K
L L
M M
SCHEMATIC DIAGRAMS (1/10)
AUDIO_FRONTEND_SWITCH
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
31

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A Bluetooth Module A
1
2 J7
HPX03X-1A1-XX00
BT SPI PORT
3
C37 58
VSS SW UPGRADE
39pF 57 44 C39 C40 C41 C38
ANT NC
56 BT3.3V
C42 C43 VSS 220pF 220pF 220pF 220pF
VCC1
NC NC 31 32 MOSI
PIO8 SPI_MOSI MOSI1
7 37 CLK CLK1
PIO7 SPI_CLK
17 39 MISO MISO1
PIO6 SPI_MISO
33 36 CSB CSB1
R29 PIO5 SPI_CSB
BT_STATUS 8 GND1
BT_STATUS PIO4
10 18 R31 47R0402 BT-DO
47R C44 PIO3 PCM_OUT
9 15 R32 47R0402 BT-SCLK
0402 220pF PIO2 PCM_CLK
3 20 R33 47R0402 BT-LRCLK
B 2
PIO1 PCM_SYNC
16 B
PIO0 PCM_IN L4
600R@100MHz D3.3V
59 25 UART_TX
VSS UART_TX TX
48 27 UART_RX
MIC_A_N UART_RX RX
47 U8 24 L5
MIC_A_P UART_CTS 600R@100MHz L3
21
BC05MM 16M UART_RTS C47 C48 C49 600R@100MHz
46 TP5
MIC_B_N
45 22 NC NC NC
MIC_B_P USB_DN C50 C51 U7 ADC_SYS_24576
55 23
MIC_BIAS USB_DP
54 220pF 220pF R265
AGND 4 3 XTALI
62 VDD
VSS D3.3V
52 40 BT3.3V C355 C356 330R
SPKR_A_P VDD_SMPS_CORE(1V8) R34 C354 C352 0402 C353
51 53
600R@100MHz
SPKR_A_N VDD_AUDIO(1V5) 10K 1uF 10nF
42 15pF NC / 100pF 470R
VREG_EN_H BT3.3V 16V 16V 1 2
50 60 1.8V D3.3V Vss 50V 50V
SPKR_B_P VSS
C 49
SPKR_B_N C56 C57 1.8V D3.3V C
600R@100MHz
600R@100MHz
13 C58 GND GND GND GND
PIO15 220pF 1uF 220pF C59 OSC24.576MHZ
35 41
L7
VSS PIO14 10uF GND
L8 34 30
LED0 PIO13 6.3V
BT3.3V 600R@100MHz 38 6
LED1 PIO12 C60
43 29
L10
VDD_CHG PIO11 10uF
L9
19 26 L11 NC SCL1
VSS PIO10 D3.3V 6.3V C61 10uF
11 28 L12 NC SDA1
BAT_P(VBAT) PIO9 nRESET nRSTOUT 6.3V
12 nRESET
VDD_MEM(3V3)
C66 C67 C62 C63 1 D12 C64 C65
VSS R36
14 SJD12A(C)08L01
10uF RESET nRESET
1.8VS
1uF 100nF 220pF 5 C68 C69
1
6.3V AIO0 47R SOD-123 C70
4 61 220pF 100nF D11 D3 100nF 100nF
VDD_ANA(1V5) AIO1 0402 1uF
SJD12A05L01 R37 BAT54A 16V 16V 16V
C71 C72 SOD-123 1K D3.3V
3.3VS
MCLK 0402
1uF 220pF C73
D D
3
L13
C74 600R@100MHz
R38
47pF 1.8V
33R 10uF
0402 D3.3V C75
+ C76
C77 47uF
C78
3.3K
100nF 100nF 6.3V
100nF R40
10K
10K
10K
16V 16V
SPI_nCS
16V R41 10K
10K 0402
nRSTOUT
GND
R42 L14
R43
R44
R45
R46
nRESET
0402 10K 600R@100MHz
XTALI
0402
1
RN2 RN1 D3.3V
10K 10K
1/16W 1/16W
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
104
103
102
101
100
L15
E E
99
98
97
U10 600R@100MHz
D2-74583-LR
8
CVDD
CGND
RGND
RVDD
ADCGND
ADCVDD
PLLAVDD
XTALO
nRESET
nRSTOUT
XTALI
PLLTESTA
PLLTESTB
PLLAGND
SCL0
SDA0
ADCREF
OSCOUT
GPIO0
PROTECT0
PROTECT1
TIO0
SRD1
SCK1
STD1
SC10
SC11
SC12
nSS
nTRST
AIN0
AIN1
1 96
SCLK_OUT SC20 PWMVDD
2 95 + C79 + C80
AP1_OUT SRD2 PWM0 PWM0-L C81
3 94 1000uF 1000uF
AP5_OUT SC21 PWM1 PWM1-L 100nF
4 93 10V 10V
ADC_SCLK SCK2 PWM2 PWM2-R 16V
5 92
ADC_SDATA STD2 PWM3 PWM3-R
6 91
R271 ADC_LRCLK SC22 PWMGND
7 90
MCLK_IN MCLK PWMVDD
BT-SCLK 8 89
51R SCK3 PWM4 PWM4-L
BT-DO 9 88
0402 STD3 PWM5 PWM5-L C82
BT-LRCLK 10 87
SC32 PWM6 PWM6-R 100nF
11 86
SC30 PWM7 PWM7-R
F 12
SC31 PWMGND
85 GND 16V F
13 84 PWMVDD
SRD3 PWMVDD
DSP-DO 14 83
R39 DSP-DO STD0 PWM8
DSP-SCLK-2 15 82
DSP-SCLK-2 SCK0 PWM9
C46 C55 1.8VS2 16 81
D2-74583-LR
33R 1.8V CVDD PWM10 C83
L16 L17 600R@100MHz + C84 17 80
0402 D3.3V C85 C86 CVDD PWM11 100nF
10pF 10pF / NC 600R@100MHz 22uF 18 79
100nF CGND PWM12 16V
50V 50V 6.3V GND 19 78
16V CGND PWM13
20 77 GND
R47 R48 R49 R50 100nF L18 C87 C88 RGND PWMGND
3.3VS2 21 76 PWMVDD
10K 10K 10K 10K 16V 600R@100MHz 22uF 100nF RVDD PWMVDD
22 75
+
0402 0402 0402 0402 D3.3V 16V SRD0 PWM14

R51 6.3V 10K 23 74
R272 SC00 PWM15 C89
24 73
AP1_IN SC01 PWM16 D3.3V 100nF
DSP-LRCLK-2 25 72
51R 0402
DSP-LRCLK-2 SC02 PWM17 16V
26 71 GND
0402 SCK PWMGND L19
27 70
G SPI FLASH TEMP_COM
28
TIO1 CVDD
69 GND + C90 600R@100MHz
1.8V G
U11 MISO CGND C91
29 68 22uF
SPI_nCS 1 8 MOSI RGND 100nF
CS# VCC TP6 30 67 6.3V
SPI_MISO2 7 GPIO7 RVDD 16V
SO/SIO1 HOLD# 31 66 VOL1R52 3.3K 0402
3 6 SPI_SCK GPIO3 GPIO1
PWMSYNC
C92 C93
PROTECT9
PROTECT3
PROTECT4
PROTECT5
PROTECT6
PROTECT7
WP# SCLK 32 65 R53 10K 0402

SPDIFRX1
SPDIFRX0
4 5 SPI_MOSI GPIO2 PROTECT2 L20

SPDIFTX
PUMPLO
100nF 22uF
PSCURR
PSTEMP
PUMPHI
PSSYNC
GND SI/SIO0
+
D3.3V
GPIO4
GPIO5
GPIO6
CVDD
CVDD
CGND
CGND
RGND
RVDD
16V 6.3V
SDA1
IRQA
IRQD
TEST
IRQB
IRQC
SCL1
600R@100MHz
TIO2
MX25L1006EM1I-10G TP7
R54
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
10K
FMT CHG 0402
D3.3V
8
RN3
RN4 1 8
H 1K H
TEMP1
TEMP2
1/16W 2 7
TEMP_REF
C94 3 6 R55 R56

TEMP_COM TEMP_REF
GND
1
SDA-DSP NC
SCL-DSP 16V 4 5 10R 4.99K
SPDIFRX C95
SPDIFRX C96 100nF C97 100nF R57 0402 0402
16V 16V 10K 100nF R58 TEMP1
NC
3.3VS1
1.8VS1
BOOT_EE/I2C C98 16V 10K

BOOT_EE/I2C C99 0402 1/16W
D3.3V
0402
+
R59
R60 TEMP2
+
L21 22uF 22uF L22 10K

1K
0402 C100 1.8V 600R@100MHz
6.3V 6.3V
600R@100MHz
D3.3V 0402
100nF
TP8 1 16V
J SCL-DSP
TP9
TP10
2
3
R62 I²C Address: 0xB2 J
SDA-DSP
TP11 4
nRESET 0R
5
0402
AP0_OUT
CN1
GND HPD_SPDIF_ARC
DARR83 Module
CN4
L23 600R@100MHz
1 D_RF_3.3V
2 C364 C365
3 10pF 10pF
R65 0R
K 4 5.8G_MODE 50V 50V K
5
6
7
8
9
10
GND
11 D83_RESET
12 R35
13 47K
R67 33R0402
14 IRQ 0603
R68 33R0402
15 5.8G_EN
16
R69 33R0402
17
R70 0R0402
18 5.8G_SCL
R71 0R0402
19 5.8G_SDA
L 20 L
21
R72
22 DSP-LRCLK-2
23 R74 C360 330R C361
24 DSP-SCLK-2 10pF 0402 10pF
25 33R C359 50V 50V
R75 330R0402 C358
26 DSP-DO 0402 10pF(NC)
10pF(NC)
1A C366 C367 50V 50V
10pF 10pF
50V 50V
M SCHEMATIC DIAGRAMS (2/10) M
DSP
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
32

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
B HDMI_D_5V
B
C344 C345
100nF 100nF
HDMI Out HDMI In 16V 16V
20
21
22
23
23
22
21
20
J2 J3
SHELL1
SHELL2
SHELL3
SHELL4
SHELL4
SHELL3
SHELL2
SHELL1
U36 HDMI_D_5V
38 1
NC 5V_SUPPLY
2
LV_SUPPLY
CE-REMOTE
CE-REMOTE
CK-SHIELD
CK-SHIELD
D2-SHIELD
D1-SHIELD
D0-SHIELD
D0-SHIELD
D1-SHIELD
D2-SHIELD
DDCDATA
DDCDATA
RXD_0_P 29 10 RXD_0_P
DDCCLK
DDCCLK
SW_5V RXD_0_P TMDS_D0+ TMDS_D0+ RXD_0_P
28 11
TMDS_GND TMDS_GND
GND
GND
RXD_0_N 27 12 RXD_0_N
HPD
HPD
CK+
CK+
D2+
D1+
D0+
+5V
+5V
D0+
D1+
D2+
CK-
CK-
D2-
D1-
D0-
SW_5V
D0-
D1-
D2-
RXD_0_N TMDS_D0- TMDS_D0- RXD_0_N
NC
NC
RXD_1_P 32 7 RXD_1_P
RXD_1_P TMDS_D1+ TMDS_D1+ RXD_1_P
R76 R77 31 8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
HDMI_D_5V TMDS_GND TMDS_GND
2K 2K RXD_1_N 30 9 RXD_1_N
RXD_1_N TMDS_D1- TMDS_D1- RXD_1_N
C 0402 0402
C
Conn Side
Chip Side
RXD_2_P 35 4 RXD_2_P
RXD_2_P TMDS_D2+ TMDS_D2+ RXD_2_P
R78 34 5
R64 TMDS_GND TMDS_GND
DDCTX_SDA 1K RXD_2_N 33 6 RXD_2_N
2.2M RXD_2_N TMDS_D2- TMDS_D2- RXD_2_N
DDCTX_SCL
CEC5
0402
CEC4
0603 RXD_C_P 26 13 RXD_C_P
RXD_C_P TMDS_CK+ TMDS_CK+ RXD_C_P
SW_5V 25 14
RX_DET TMDS_GND TMDS_GND
RX_DET HP_CTRLD RXD_C_N 24 15 RXD_C_N
RXD_C_P
RXD_0_N
RXD_1_N
RXD_2_N
RXD_0_P
RXD_1_P
RXD_2_P
RXD_C_N TMDS_CK- TMDS_CK- RXD_C_N
HPD
23 16
RXD_C_N
TX_C_N
TX_2_N
TX_1_N
TX_0_N
TX_C_P
R97 CE_REMOTE_OUT CE_REMOTE_IN CEC4

TX_2_P
TX_1_P
TX_0_P
3.6M 22 17
R81 NC 0402 DDC_CLK_OUT DDC_CLK_IN DDCD_SCL
0603 21 18
DDC_DAT_OUT DDC_DAT_IN DDCD_SDA
20 19
HDMI_D_5V HOTPLUG_DET_OUT HOTPLUG_DET_IN HP_CTRLD
R82
37
RXD_C_N
RXD_C_P
RXD_0_N
RXD_0_P
RXD_1_N
RXD_1_P
RXD_2_N
RXD_2_P
48.7K R8347K ESD_BYP
TX_2_P
TX_2_N
TX_1_P
TX_1_N
TX_0_P
TX_0_N
TX_C_P
TX_C_N
0402 GND 0402

3 C346
GND 100nF
36
DDCD_SCL
DDCD_SDA
GND 16V
TPD12S520DBTR
HPD_SPDIF
SW_5V HP_TX
D HDMI_TX_RESERVED
D
C340 C341
R88
C338 C339 PCB Tracks for each differential pair must be tracked side by side.
10K
100nF 100nF
0402
1uF 1uF Each Diff pair should have 105R impedance between each other
16V 16V 16V 16V
Q2 PCB track lenghts to connector should be minimum distance
2
L24
LMBT3904LT1G(NC) R240 R241
51R 51R 1 L51 2 H1V8_1 PIN2 PIN21 PIN34 PIN110 PIN129
SOT-23 H1.8V CVDD_1V8 1V8F1B2
U35 SW_5V 1 0402 0402 10uH FERRITE
38 1 1210 C337
NC 5V_SUPPLY
2 L29 10uF C101 C102 C103 C104 C105 C106 C107 C108 C109 C110 C111
LV_SUPPLY R87
R242 3.3V 6.3V 100nF 10nF 100nF 10nF 100nF 10nF 100nF 10nF 100nF 10nF 10uF
NC 600R@100MHz
3
TX_0_P 29 10 TX_0_P 5.1 C152 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 6.3V
TX_0_P TMDS_D0+ TMDS_D0+ TX_0_P R89 0402
28 11 RX_DET 0402 R90 1M / NC 100nF
TMDS_GND TMDS_GND RX_DET 3.3V
TX_0_N 27 12 TX_0_N 16V
TX_0_N TMDS_D0- TMDS_D0- TX_0_N NC R91 U12
0402
5
TX_1_P 32 7 TX_1_P C153 10K L32

TX_1_P TMDS_D1+ TMDS_D1+ TX_1_P R93 0402 R94
31 8 2 + 4
TMDS_GND TMDS_GND HPD_SPDIF_ARC TXPLVDD_1V8 PIN37
TX_1_N 30 9 TX_1_N 1V8F1B1
- FERRITE
TX_1_N TMDS_D1- TMDS_D1- TX_1_N NC NC
100nF R96
0402 0402
Conn Side
Chip Side
10K
3
TX_2_P 35 4 TX_2_P 16V

TX_2_P TMDS_D2+ TMDS_D2+ TX_2_P
E 0402 C162 C163 C164
E
1
34 5
TMDS_GND TMDS_GND 100nF 10nF 10uF
TX_2_N 33 6 TX_2_N
TX_2_N TMDS_D2- TMDS_D2- TX_2_N 16V 16V 6.3V
TX_C_P
TX_C_P 26
TMDS_CK+ TMDS_CK+
13 TX_C_P
TX_C_P
74LVC1G125GV
25 14
TMDS_GND TMDS_GND
TX_C_N 24 15 TX_C_N
TX_C_N TMDS_CK- TMDS_CK- TX_C_N
R99
23 16
CEC5 CE_REMOTE_OUT CE_REMOTE_IN 1 L52 2 H1V8_2 PIN18 PIN61 PIN81 PIN91 PIN126
22 17 10K H1.8V DVDD_1V8 1V8F2
DDCTX_SCL DDC_CLK_OUT DDC_CLK_IN
TXPVDD_1V8
21 18 0402 10uH
HDMI_D_5V
L25
DDCTX_SDA DDC_DAT_OUT DDC_DAT_IN
CVDD_1V8
TVDD_3V3
TVDD_3V3
CVDD_1V8
DDCD_SCL
DDCD_SDA
DVDD_1V8
TVDD_3V3
TVDD_3V3
CVDD_1V8
DDCC_SCL
20 19 1210 FERRITE
HP_TX HOTPLUG_DET_OUT HOTPLUG_DET_IN
HP_CTRLD
C113 C114 C115 C116 C117 C118 C112 C119 C120 C121 C122
RXD_2_P
RXD_2_N
RXD_1_P
RXD_1_N
RXD_0_P
RXD_0_N
RXD_C_P
RXD_C_N
37 100nF 10nF 100nF 10nF 100nF 10nF 100nF 10nF 100nF 10nF 10uF
ESD_BYP 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 6.3V
3 C342
GND 100nF
36
GND 16V L26
TPD12S520DBTR PIN73 PIN86
3.3V DVDDIO_3V3
FERRITE 3V3FB1
F C123
100nF
C124
10nF
C125
100nF
C126
10nF
C151
10uF F
16V 16V 16V 16V 6.3V
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
U13
ADV7623 L27
TXPVDD
CGND
CVDD
RXD_2+
RXD_1+
RXD_C+
RXD_C-
TVDD
CGND
RXD_0+
TVDD
CGND
CVDD
RXC_2+
RXC_1+
CGND
CVDD
RXD_2-
RXD_1-
RXD_0-
DDCD_SCL
HP_CTRLD
TVDD
CGND
RXC_0+
TVDD
RXC_C+
RXC_2-
RXC_1-
RXC_0-
RXC_C-
DDCC_SCL
DDCD_SDA
DVDD
DGND
5V_DETD
PIN100 PIN103
PVDD_1V8
FERRITE 1V8F2B2
R86
3.3V
37 144 C128 C129 C130 C131 C132
27.4K D4 TXPLVDD_1V8 TXPLVDD DDCC_SDA DDCC_SDA
38 143 100nF 10nF 100nF 10nF 10uF
0402 BAS16J TXGND 5V_DETC
39 142 16V 16V 16V 16V 6.3V
TXPGND HP_CTRLC
40 141
EXT_SWING RXB_2+
41 140
HP_TX HPD_ARC- RXB_2-
42 139
R100 HDMI_TX_RESERVED ARC+ TVDD TVDD_3V3
43 138 L28
R92 887R DDCTX_SDA TXDDC_SDA RXB_1+
0R 44 137 PIN6 PIN12 PIN25 PIN31 PIN114 PIN120 PIN133 PIN139
CEC5 CEC 0402 DDCTX_SCL TXDDC_SCL RXB_1- 3.3V TVDD_3V3 3V3FB2
0402 45 136 FERRITE
R95 TXAVDD_1V8 TXAVDD CGND
46 135
CEC4 TXGND RXB_0+
47 134
G 0R
0402
TX_C_N
TX_C_P
48
49
TXC-
TXC+
RXB_0-
TVDD
133
132
TVDD_3V3
C135
100nF
C136
10nF
C137
100nF
C138
10nF
C139
100nF
C140
10nF
C141
100nF
C142
10nF
C143
100nF
C144
10nF
C145
100nF
C146
10nF
C147
100nF
C148
10nF
C149
100nF
C150
10nF G
TXGND RXB_C+ 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V 16V
R98 50 131
0R TX_0_N TX0- RXB_C-
51 130
0402 TX_0_P TX0+ CGND
52 129
TXGND CVDD CVDD_1V8 R101
53 128 L30
TX_1_N TX1- DDCB_SCL
54 127
DVDDIO_3V3 TX_1_P TX1+ DDCB_SDA 10K TXAVDD_1V8 PIN45 PIN55
CEC_3_3V 55 126 FERRITE 1V8F2B1
TXAVDD_1V8 TXAVDD DVDD DVDD_1V8 0402
56 125
Connected to MCU GPIO TX_2_N TX2- DGND
57 124
R102 TX_2_P TX2+ 5V_DETB C154 C155 C156 C157 C158
58 123
4.7K TXGND HP_CTRLB 100nF 10nF 100nF 10nF 10uF
59 122
0402 CEC CEC RXA_2+ 16V 16V 16V 16V 6.3V
60 121
DGND RXA_2-
61 120
R103 0402 NC DVDD_1V8 DVDD TVDD TVDD_3V3
62 119
ALSB RXA_1+
63 118 L31
CS RXA_1-
64 117
SPI_SCK EP_SCK CGND TXPVDD_1V8 PIN36
65 116 FERRITE 1V8F2B3
SPI_CS EP_CS RXA_0+
EDID/OSD 66 115
SPI_MOSI EP_MOSI RXA_0-
67 114
SPI_MISO EP_MISO TVDD TVDD_3V3 C159 C160 C161
H H
R30 330R 0402 68 113
MCLK_IN MCLK_IN RXA_C+ 100nF 10nF 10uF
69 112
DSP-SCLK-2 SCLK_IN RXA_C- 16V 16V 6.3V
I2S IN R63 330R 0402 70 111
DSP-LRCLK-2 AP5_IN CGND
71 110
AP4_IN AP4_IN CVDD CVDD_1V8 R104
72 109
DGNDIO DDCA_SCL
MCLK_OUT
10K
DDCA_SDA
SCLK_OUT
HP_CTRLA
C45 C52 C54 C127

5V_DETA
AP0_OUT
AP1_OUT
AP2_OUT
AP3_OUT
AP4_OUT
AP5_OUT
0402
DVDDIO
DGNDIO
DVDDIO
PWRDN
INT_TX
RTERM
AP3_IN
AP2_IN
AP1_IN
AP0_IN
SDATA
XTAL1
RESET
DGND
DVDD
DGND
DVDD
PGND
PVDD
PVDD
PGND
10pF 10pF 10pF 10pF

XTAL
INT1
INT2
SCL
50V 50V 50V 50V

73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
R105
DVDDIO_3V3
499R
AP3_IN
AP2_IN
AP0_IN
DUT_RESET
SDA
SCL
0402
DVDDIO_3V3
DVDD_1V8
DVDD_1V8
PVDD_1V8
PVDD_1V8
PWRDNB
J AP0_IN
J
R66
AP2_IN 330R
AP3_IN 0402
AP4_IN C53 C133
10pF 10pF
R73
AP1_IN
R85 50V 50V R106

10K 330R
0402 0402
Del on V1.2 390K
3.3V 0402
Y2
3.3V 1 2
MCLK_OUT
R107
4.7K 0402
AP0_OUT
AP2_OUT
AP3_OUT
AP4_OUT
28.63636MHZ
20pF
C166 C167
INT_TX
R108
4.7K 0402 22pF 22pF
50V 50V
K R109
4.7K 0402
K
INT2_RX
INT_RX
R79 R84 R80

330R 330R 330R
0402 0402 0402
C134 C165 C184 C185 C186 C187
10pF 10pF 10pF 10pF 10pF 10pF

SCLK_OUT
50V 50V 50V 50V 50V 50V

AP1_OUT
AP5_OUT
L L
M M
HDMI
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
P1
R267
BOOT_EE/I2C
BOOT_EE/I2C
AU1
1 MCLR 33R/NC
TV2
2 0402
BK3.3V TV1
3
B B
OSC1 and OSC2 needed oscillator for ICD 4
5
PGD
PGC
R110
nRESET
6 47R
0402 U14
IO Expander
6
5
4
3
2
1
CN2 AW9523B
P0_1
P0_0
P1_3
P1_2
P1_1
P1_0
BK3.3V
STD_BY 7 24
R111 P0_2 AD1
TV_IN 8 23
4.7K P0_3 RSTN nLocRESET
9 22
0402 R113 BT_IN 10
GND INTN
21 D15
P0_4 VCC BK3.3V SJD12A05L01
LEARN 11 20
C172100R D14 SURROUND 12
P0_5 SDA
19
SDA-DSP C168 C169 SOD-123
100nF0402 SJD12A05L01 P0_6 SCL SCL-DSP 100nF 10uF BK3.3V
R112
P0_7
P1_4
P1_5
P1_6
P1_7
AD0
16V SOD-123 16V 6.3V
C BK3.3V C
10R
C170 C171 0402
13
14
15
16
17
18
L54 100nF 1uF
U15 VOL_UP
MCLR
BK3.3V 16V 16V

600R@100MHz R114
MUTE
7 16 MUTE
MCLR PGED1/AN0/VREF+/CVREF+/PMA6/CN2/RB0
56 15 RN7 1K 0402 SEL_COAX/OPT
VCAP/VDDCORE PGEC1/AN1/VREF-/CVREF-/CN3/RB1 VOL_DWN
57 14 1 8 BUTTON
ENVREG AN2/C2IN-/CN4/RB2 MUTE_LED R116
10 13 ANA_MCU
VDD AN3/C2IN+/CN5/RB3 100K
26 12 2 7
VDD AN4/C1IN-/CN6/RB4 AUTO ON ANALOG 0402
38 11
VDD AN5/C1IN+/VBUSON/CN7/RB5
19 17 PGC COAX_MCU 3 6
AVDD PGEC2/AN6/OCFA/RB6 AUTO ON COAX
PGED2/AN7/RB7
18
21
PGD
OPT_MCU 4 5
I²C Address: 0xB6
C173 C174 C175 C176 C177 C178 C179
D 10uF 100nF 100nF 100nF 100nF 100nF 100nF
AN8/U2CTS/C1OUT/RB8
AN9/C2OUT/PMA7/RB9
22
AUTO ON OPT
D
6.3V 16V 16V 16V 16V 16V 16V 20 AVSS TMS/AN10/CVREFOUT/PMA13/RB10
23
5.8G_MODE
47R
9 24 1/16W
VSS TDO/AN11/PMA12//RB11 RX_DET
25 27
VSS TCK/AN12/PMA11/RB12 5.8G_EN
41 28
VSS TDI/AN13/PMA10/RB13 D83_RESET
VUSB 29
AN14/U2RTS/PMALH/PMA1/RB14 VPT_PW
30
MXTALI 39 AN15/OCFB/PMALL/PMA0/CN12/RB15 nLocRESET
OSC1/CLKI/RC12 R117 10R
Y3 MXTALO 40
OSC2/CLKO/RC15
1 2 48
D5 SOSCO/T1CK/CN0/RC14 46 IR_MCU D3.3V
47 OC1/INT0/RD0 IR
1N15817 C1808MHZ C181 SOSCI/CN1/RC13 49
U1RTS/OC2/RD1 PAIR_PUSH
SM-1 18pF 30pF 18pF 50
60 U1RX/OC3/RD2 TX R244
50V 50V R61 RE0/PMD0 51
61 U1TX/OC4/RD3 RX 10K
NPDN RE1/PMD1 52
62 OC5/IC5/PMWR/CN13/RD4 DSP_PW 0402
33R/NC RE2/PMD2 53
E 0402
63
RE3/PMD3
PMRD/CN14/RD5
54
IRQ E
64 CN15/RD6
BK3.3V RE4/PMD4 55 CEC_3_3V
1 CN16/RD7 RN8 R120 10R D3.3V
C182 RE5/PMD5 42
J4 2 RTCC/IC1/INT1/RD8 SDA 4 5
VBUS 10uF RE6/PMD6 43 SDA-DSP
0 3 U1CTS/SDA1/IC2/INT2/RD9 R121 R122
6.3V RE7/PMD7 44
VBUS 35 SCL1/IC3/PMCS2/PMA15/INT3/RD10 SCL 3 6 4.7K 4.7K
L33 U16 VUSB 45 SCL-DSP
1 34 IC4/PMCS1/PMA14/INT4/RD11 0402 0402
4 3 VBUS
2 600R@100MHz 36 2 7
D-/RG3 FMT CHG
3 37 58
USB0B_N USB0_N D+/RG2 RF0 5.8G_SDA R118
4 4 59 1 8
USB0B_P 5 2 USB0_P RG6/SCK2/PMA5/CN8 RF1 5.8G_SCL SDA 5.8G_SDA D3.3V
5 5 33
RG7/SDI2/PMA4/CN9 USBID/RF3 4.7K 0402
6 31 47R
RG8/SDO2/PMA3/CN10 SDA2/U2RX/PMA9/CN17/RF4 R124 R119
Mini-USB 5S B Type SMT 8 32 1/16W
6 1 RG9/SS2/PMA2/CN11 SCL2/U2TX/PMA8/CN18/RF5 SCL 5.8G_SCL D3.3V
47R 4.7K 0402
F PRTR5V0U2F(NC) C183
2.2uF PIC32MX440F256H-80I/PT
0402 F
10V
D3.3V PWRDNB DUT_RESET

R249
R129 R128
36.5K
36.5K 36.5K
0402
0402 0402
SW2
1 2
PAIR_PUSH
3 4
G KFC-A06-19-9.5H
G
CN3
STD_BY TP25
1
TV_IN TP26
2
BT_IN TP27
3
LEARN TP47
4
SURROUND TP28
5 R260
MUTE_LED TP29
6 10R
VOL_DWN TP30
7 0603
VOL_UP TP31
8
IR_MCU TP32
9
IR_RPT TP33
3
10
BUTTON TP34 Q10
11
TP35 R259 BSS79C
BK3.3V 12 1
TP36
H BK3.3V
TP37
13
1.5K
SOT-23 H
14
TP38 0603
15
2
16
1A
PJ2
VUSB
GND 2
GND
VUSB
4
R256 5
5.1K
0603 3
U37 R258 C351
0.5A
J 1
GND VCC
8 20K
0603
0.1uF
16V PJ-234 J
2 7
TRIG DISCH R257 To connect IR repeater
3 6
OUT THRES
4 5
RESET CONT 75K
C349 0603
C350
NE555
0.1uF 220pF GND
16V 50V
Q9
LMBT3904LT1G
3
SOT-23
R255
IR_RPT 1
IR_RPT
100K
0603
K GND GND GND K
2
GND
L L
MCU
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
34

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
+HVP
B B
R268
56K GND
+HVA 0603
R145
BIAS
820R
0603 R146 + C189 3 U38 R147
C188 100uF AZ809ANSTR-E1 D3.3V 100K HV
1K R148
GND VCC
0.1uF 35V
0603 NPDN
50V 2
C357 R269 RESET NC
1uF 10K + C192 L35 TP39
C193 C194 470uF
A-GND 6.3V 0603
R270 1nF 0.1uF 35V
C 1K 50V 50V 10uH C195 C
C196 C197 R149
1
Change DC blocking to 10uF to get coner frequency to 1.6Hz R150 C198

U19 330pF 10R 0402 1nF
1 32 50V 1uF 50V 3.3R
IN1+ MODSEL PVCC 50V 0.01uF
2 31 GND GND 0402
R151 SDZ PVCC R152 50V
C199
3 30 C200 0.22uF50V 10R 0402 C201 R153
FAULTZ BSPR C202
C203 C204 GND GND 4 29 1nF
R154 R155 10K R156 RINP OUTPR C205 L36 1uF
C206 100pF 5 28 50V 3.3R
PWM0-L 0402 IN1+ IN1- RINN GND 330pF 50V 0.01uF J5
50V C207 6 27 0402
10K 23.2K U20C 150R C208 470pF PLIMIT OUTNR 50V 50V
10uF R157 C210 10uF 1uF 7 26 C209 0.22uF50V 4
0402 0402 0402 50V GND R158 GVDD BSNR 10uH
10V 10K 680pF 9 16V 8 25 TP40 3
R159 R160 R250 R161 GAIN/SLV GND L37
0402 50V 8 C212 26dB Gain (Master) 9 24 C211 0.22uF50V TP41 2
51R 100K GND BSPL
10 330pF 10 23 1
680R 680R IN2+ 0402 20K LINP OUTPL
D R163 0402 0402
0402
50V 0402
11
LINN GND
22
10uH C213 C214 3A D
C215 TL074C 13 C217 MUTE 12 21 C216 R164
A-GND 10K R165 MUTE OUTNL R166 C218 1nF
C219 680pF 14 13 20 C220 0.22uF50V 330pF 10R 0402
0402 R167 IN1- AM2 BSNL 1uF 50V
R168 50V C221 100pF 12 14 19 50V 3.3R
PWM1-L 150R IN2- AM1 PVCC 50V 0.01uF
10K 50V U20D 10uF 15 18 GND 0402
23.2K 0402 AM0 PVCC R169 50V
10uF 0402 R170 TL074C 16V 16 17 10R 0402 C222 R171
0402 SYNC AVCC GND C224 C223
10V BIAS 1nF
10K GND IC C225 L38 1uF 50V 0.01uF 3.3R
0402 HV 330pF 50V 0402
50V 50V
10uH
TP42
+ C226
C228 C227 470uF
E 1nF 0.1uF 35V E
50V 50V
R172
C229 C230 C231
R173 R174 10K
100pF R175 150R0402 GND
PWM2-R 0402 IN2-
50V
10K 23.2K C232 470pF
10uF U20B 10uF
R176
0402 0402 50V
10V 10K C233 6 TL074C R251 16V
R177 R178 +HVA
0402 680pF 7 51R C234
50V 5 0402 330pF R180
680R 680R
U20A
R181 0402 0402 50V 33R
4
C235 2 C236
A-GND 10K 0402
C237 680pF + 1 R182
0402
F R184 50V R183 C238 100pF 3 - 150R
IN2+
F
PWM3-R
10K 50V 0402 10uF GND
23.2K HV
11
10uF 0402 R185 TL074C C335 16V

0402
10V BIAS 0.1uF
10K 100V
0402 R186 + C239 L39 TP43
C240 C241 470uF
A-GND D3.3V 100K / NC
A-GND R187 1nF 0.1uF 35V
NPDN 50V 50V 10uH
C242 C243 R188
R189 10K0402 NC R190 C244
U21 330pF 10R 0402 C245 1nF
C246 C247 1uF
R191 R192 R193 1 32 50V 50V 0.01uF 3.3R
C248 100pF IN3+ MODSEL PVCC 50V
PWM4-L IN3+ 2 31 GND GND 0402
50V C249 470pF SDZ PVCC R194 50V
10K 23.2K U22C 150R 3 30 C250 0.22uF50V 10R 0402 C251 R195
10uF 10uF FAULTZ BSPR C252
G 10V
R196
0402 C2530402
9
0402 50V
16V
GND 4
RINP OUTPR
29 C254 1nF G
10K 680pF R197 R198 5 28 C255 L40 1uF 50V 0.01uF 3.3R
0402 50V 8 R252 C256 IN3- RINN GND 330pF 50V J6
C257 6 27 0402
10 51R 330pF PLIMIT OUTNR 50V 50V
680R 680R
U22D 1uF 7 26 C258 0.22uF50V 4
R201 0402 50V GND R200 GVDD BSNR 10uH
C259 0402 0402 8 25 TP44 3
10K TL074C 13 C260 R202 GAIN/SLV GND L41
A-GND 680pF R203 26dB Gain (Slave) 9 24 C261 0.22uF50V TP45 2
C262 0402 R204 14 47K GND BSPL
50V R205 C263 100pF 12
IN3-
IN4+ 0402 75K
10
LINP OUTPL
23 1
PWM5-L 150R 11 22
50V 10uF 0402 LINN GND C265 10uH C264 3A
10K 23.2K 0402 MUTE 12 21 C266 R206
10uF R207 TL074C 16V MUTE OUTNL R208 1nF C267
0402 0402 13 20 C268 0.22uF50V 330pF 10R 0402 1uF
10V BIAS AM2 BSNL 50V 50V
14 19 50V 0.01uF 3.3R
10K IN4- AM1 PVCC
15 18 GND 0402
0402 AM0 PVCC R209 50V
16 17 10R 0402 C269 R210
H MUTE SYNC AVCC GND C271 C270 H
C272 1nF
GND IC C273 L42 1uF 50V 0.01uF 3.3R
1nF / NC 330pF 50V 50V 0402
50V 50V
10uH
TP46
R211 GND HV
C274 C275
R212 R213 10K R214
C276 100pF
PWM6-R 0402 IN4- + C277
50V C278 470pF C279 C280
10K 23.2K 150R 470uF
10uF R215 C2810402 50V 10uF 1nF 0.1uF
0402 0402 35V
10V 10K 680pF 6 16V 50V 50V
R216 R217 R253
0402 50V 7 +HVA C282
5 51R
J U22B 680R 680R
U22A 0402
330pF J
R219 TL074C 0402 0402 50V GND
4
C283 2 C284
A-GND 10K R220
C285 680pF + 1
0402
R221 50V R222 C286 100pF 3 -
IN4+
PWM7-R 150R
50V 10uF
10K 23.2K 0402
11
10uF R223 TL074C 16V

0402 0402
10V BIAS
10K A-GND C336
0402 0.1uF
100V
A-GND
K K
L L
M M
POWER STAGE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
35

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
HV
B B
HV
U23
BK5V
1 5
VIN VOUT BK5V
+HVP
R224 0R / NC C287 2 + C288
0.1uF GND C289
1000uF
R225 0R / NC 16V 3 4 10V 0.1uF
ON/OFF NC 16V
+HVA
U24 GND GND
L34
AO4435 8 LP2981A-50 GND GND
VPT_PW
3 SO8 7
C 600R@100MHz C
2 6 +
C190 C191
1 5 100uF
35V 0.1uF U25
50V ADC3.3V
R226
1 5
VIN VOUT ADC3.3V
4
47K A-GND + C290

R227 2 1000uF C291
0402 GND
DSP_PW
220K C292 10V 0.1uF

0402 0.1uF 3 4 16V
ON/OFF NC
3
16V
Q8 GND GND
R228 LMBT3904LT1G
1 GND GND LP2981A-33DBVR
D SOT-23 D9 D
47K R229 C293 VPT_PW
0402 100K 10uF / NC
0402 6.3V
2
LL4148
LL34 VUSB
1
GND GND C294 D6 LD1117AL-33

0.1uFL43 L44
GND U27 U26 BK3.3V
L45
GND BOOST
5 6 50V 120R@100MHz + C297 3 2
GND
VIN SW C295 C296 Vin Vout BK3.3V
120R@100MHz 1N5817 / ?
1000uF 4 + C298
15uH R230 100nF 22uF C299 Vout C300
GPSR0640-150M 10V SMA 1000uF
C301 4 3 30K 16V 10V 100nF 10V 100nF
0.1uF EN VFB D7 0603 16V 16V
1
SOT-223
E 50V B240A-13-F E
GND GND GND GND GND GND
R231
2
GND MCP16301 GND

30K
GND 0603
R232
GND
10K
0402
GND SOT-223
LD1117AL-18-AA3-A-R
HV L46 SW_5V
F C305 SW_5V
L47 Q11 U28 F
VCC L49 2 3 3 2
GND
Vin Vout 1.8V
120R@100MHz 120R@100MHz + C306 4 + C307
L48 10uH C308 C309 C310 Vout C311
100nF 1000uF 1000uF
120R@100MHz U29 16V R235 100nF 22uF 10V R261 SOT-23 100nF 10V 100nF
10.2K 16V 10V 100K 16V 16V
1
1
CN5 TH1 1 8 D8 B240A-13-F AO3401A
BOOT PH 0402 0402
1 2 7
VIN GND
3 3 6 GND GND GND GND
DSP_PW EN COMP
2 TH 4 Ohm/4A + C312 4 5 GND GND GND
C313 C314 SS VSENSE
1000uF
2A 0.1uF 35V 0.1uF TPS54331DR R262 LD1117AL-33
HDJ-020-04-C 50V 50V C315 C316 R236 47K U30 D3.3V
G R237 C317 4.7nF 39pF 1.87K 0402 3 2 G
GND
Vin Vout D3.3V

3
GND GND GND GND 10K 33nF 16V 10V 0402 4 + C318
0402 16V R238 Q12 C319 Vout C320
R263 1000uF
1 LMBT3904LT1G 100nF 10V 100nF
49.9K VPT_PW SOT-23 16V 16V
1
GND SOT-223
0402 4.7K
GND
0402 R264
GND GND U31 GND GND GND
100K
2
LD1117AL-33
0402 SOT-223
3 2
GND
Vin Vout D_RF_3.3V

4 + C321
C322 Vout C323
1000uF
H GND GND 100nF 10V 100nF H
16V 16V
1
GND GND GND GND

U34
LD1117AL-33
SOT-223 DBT3.3V BT3.3V
L50 R239
3 2
GND
Vin Vout BT3.3V

4 600R@100MHz
C331 Vout C332 0R C333
1206 + C334
0.1uF 0.1uF 1000uF 0.1uF
16V 16V 16V
1
10V
J J
GND GND GND
GND GND
U32
LD1117AL-33
SOT-223 3.3V
3 2
GND
Vin Vout 3.3V

4 + C324
C325 Vout C326
1000uF
100nF 10V 100nF
16V 16V
1
K GND GND GND GND K

U33
LD1117AL-18-AA3-A-RH1.8V
3 2
GND
Vin Vout H1.8V

4 + C327
C328 Vout C329
1000uF
100nF 10V 100nF
16V 16V
1
GND GND GND GND
L L
POWER SUPPLY
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
B B
Display & Key Board BK3.3V

BK3.3V
CN1
R13 6
0402 0R LD1 IR_MCU_PW TP19
5
C White
LED 1, Standby: White 4
IR_MCU_SIG
IR_RPT_PW
C
3 TP20
IR_RPT_SIG
2
1
LD2 LED 2, TV Input: White 2A
R14 White
0402 0R
GND
0R R230402
White
LD3 LED 3, Bluetooth Input: White
D D
0R R240402 LD4
LED 4, Learn : White
White
0R R25 0402 LD5

White
LED 5, Surround Mode button: White
0R R260402 LD6
E LED 6, Mute: White E
White
CN3
1 TP6
2
3
TP7
TP8
0R R270402 LD7 LED 7, Volume Down: White
4 White
TP17
5 TP9
6
7
TP10
TP11
0R R28 0402 LD8 LED 8, Volume Up: White
8 White
TP12
F 9 TP13 F
10 TP18
11 TP14
12 R10
BK3.3V 100R
13 TP15 R12
14 C1 C4 0603
TP16 IR_MCU_PW 100R
15 10uF 10uF 0603
6.3V 16V R11
16 IR_MCU_SIG IR_RPT_PW
R35
10K C2
0.5A
0603 10uF 10K C3
6.3V
0603 10uF
G GND 6.3V G
GND
IR_RPT_SIG
GND
BK3.3V
R9
10K
0603 Standby TV input Bluetooth Input Learn Surround Mode Mute Vol- Vol+
SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
H H
3 4 3 4 3 4 3 4 3 4 3 4 3 4 3 4
KFC-813A KFC-813A KFC-813A KFC-813A KFC-813A KFC-813A KFC-813A KFC-813A
R1 R2 R3 R4 R5 R6 R7 R8
910 1.6K 2.4K 3.3K 5.1K 8.2K 16K 33K
0603 0603 0603 0603 0603 0603 0603 0603
J J
GND
K K
L L
Button
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
37

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
B B
C C
D D
BK3.3V
E E
CN1
6
IR_PW TP1
5
IR_MCU_SIG TP2 IR1
4
IR_RPT_PW TP3
3
VOUT
IR_RPT_SIG TP4
GND
2
VCC
1 TP5
2A
1
2
3
GND REMOTE
F F
GND
IR2
VOUT
GND
VCC
G G
1
2
3
REMOTE
GND
H H
J J
K K
L L
M
SCHEMATIC DIAGRAMS (8/10) M
IR
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
38

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
B B
C C
D D
E E
VDD_MCU
VR1
CN1
VR Rotate
F F
SW1 GND 1
2
2 1
3
4
4 3
5
6
G TS-027H-CSM-B-RS G
LED1 3A
Dual LED 3 pin
GND
GND GND
H H
J J
K K
L L
M M
Sub Woofer Volume
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
39

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
VDD_W
L1
DARR83 Module
C78 C75 C76 C77 600R@ 100MHz
B 100uF 1uF 100n 1nF
B
6.3V 6.3V 50V
CN3 TP33
GND AGND GND RFGND
1
TP15
2
TP23 R2 0R 0603
3 5.8G_MCLK
VDD_MCU R3 0R 0603
4 5.8G_MODE
5
TP32
6
R133 0R 0603
7
8
R4 9
1K 10
0603 11
C NC / DTC 115E
12
TP24
C
13
3
TP25 R6 33R 0603
SOT-23 Q1 14 IRQ
R9 R7 33R 0603
1 15 5.8G_EN
LED_LINKED 360 TP26
16
TP27 R8 33R 0603
17 D83_RESET
R54 VDD_MCU TP28 R10 0R 0603
18 SCL R1
1K R11 0R 0603
3
Q2 19 SDA 47K
2
R12
1 LMBT3904LT1G 20 0402
LED_N_LINKED 1k TP29
SOT-23 21
IRQ TP1 6 TP30 R13 0R 0603
22 DSP-LRCLK
TP2 5 TP34
VOL _CTR L 23
VDD_MCU VDD_MCU TP3 4 R15 33R 0603
PAIR_BUTTON 24 DSP-SCLK
TP4 3 TP31
2
MCU_RESET 25
To Programmer TP5 2 R16 33R 0603
26 DSP-DO
R17 R18 TP6 1
D 1 TP7
VDD_MCU
4.7k IC1
4.7k TP9 R19 33 1A D
RX TP8 D83_RES ET
2 TP10 SCL 1 20 CN1
TX SCL P3_5 P3_4 SDA AMP_ON
3 TP11 2 19
R20 TX P3_7 P3_3 VOL _CTR L To Volume control
4 TP12 3 18 GND
MCU_RESET RESET P1_0
5 TP13 R21 10k 4 17 VDD_MCU
MODE 5.1K XOU T P1_1 C2
6 TP14 C3 C1 5 16
0603 VS S VR EF 100n
100n NC / 100nF R22 10k 6 15
XI N P1_2 5.8G_EN C4
CN2 7 14
VC C P1_3 LED_LINKED 100n
GND R23 10k 8 13
MODE P1_4 LED_N_LINKED
GND 9 12 GND
GND C5 C6 P4_5 P1_5 HV_ON
10 11
100n 10u P1_7 P1_6 PA_RST
R5F211B4
GND
GND
E MODE E
R24 RX
0 PA_PDN
5.8G_MODE
R25
0
VDD_MCU
PA IR _B UT T ON
L2
600R@ 100MHz
U7 MCLK
R26 R28
4 3
VDD 5.8G_MCLK
F C8 C7 3.3R C74
0 F
C10 C9 0402 100p
1uF 10nF
15pF NC / 100pF
16V 16V 1 2
Vss 50V 50V
GND GND GND GND

OSC12.288MHZ
GND
22.1K
R27
HV
G G
C11 C12 EC 1
+
100nF 1nF
R30 C13 R29 470uF
C14 470 47nF 470 AGND AGND
47nF
AMP3.3 C15
2200pF
AGND
1uF
C17 C16
HV 4700pF
10K
4700pF
C18 R32
33nF 18
8 R 31
5 C19
12
11
10
EC 2 IC2 C20
7
6
4
3
2
1
+
330p
470uF L3 Q3 TA S5711
H A6 R6H-3T AO3401A TP16 FB1 AMP3.3 H
PL L _FL T P
OC_A DJ
PL L _FL T M
A V SS
V R _A NA
SST I ME R
B ST _A
PV DD_A
PV DD_A
OUT _A
GV DD_OUT
PB T L
C21
C22 C23
BD600R/2A C25 C24 1uF
AGND 4u7F 100nF 330p
L4
1nF
S D
AGND IND_22uH
GND 13 48
R34 R35 AMP3.3 AVDD PGND_AB R33
R36 14 47 18
A_SEL _FAULT PGND_AB AGND AGND
+
G
100k C26 MCL K 10K 15 46
0R / NC C27 MCLK MCLK OUT_B
Q4 220uF 100nF R37 16 45 FB2
C28 OSC_RES PVDD_B HV TP17
J2
UT4411 10V 4u7F 18k2 17 44 C29 120R@ 100MHz
TP18 DVS SO PVDD_B 33nF C30
C31
1 8 R38 18 43 100nF 1
S D VR _DIG BST_B 1nF
2 7 47k C32 19 42 AGND 2
R39 S D PA_PDN ^PDN BST_C FB4
3 6 GND GND 100nF 20 41 C34 C33
47k S D AGND
DSP-LRCLK LRCLK PVDD_C 33nF 1nF 120R@ 100MHz TP19
10A
4 5 IC3 VDD_MCU R40 21 40
G D FB3 R41 100k Q5 DSP-SCLK SCLK PVDD_C HV
LD1117 3.3V 0R 22 39 L5
BD600R/2A AMP_ON MMBT3904 DSP-DO SDIN OUT_C IND_22uH
AO4435 3 2 23 38
VI VO SDA SDA PGND_CD
+ 24 37 R42
C35 SCL SCL PGND_CD
GV DD_OUT
GND
18
J 4 C36 C37 J
VO 10uF C38 C39
PV DD_D
PV DD_D
C41 47pF 100pF 47pF 1uF C40

C42
^R E SE T
OUT _D
1nF
+
B ST _D
R43
DV DD
A GND
ST E ST
C43
V REG
DV SS
220uF/10V 0.01uF C44 GND

GND
330p
47k
1
50V 220uF GND

10V C45 AGND AGND
3
330p
R45 47k Q6 AGND AGND R44
25
26
27
28
29
30
31
32
33
34
35
36
LMBT3904LT1G PA_RST
1 GND C46
HV_ON SOT-23 AMP3.3 33nF 18
L6
10UH 1.5A 20% 50mOhm IC4
+5V TP20 R46 R47 LD1117 3.3V TP21 VDD_W HV
C293 +5V 0 B1 0 R48 C50 C48 C47 C49
10uF 3 2 4u7F 100nF 100nF 1uF
R229 VI VO
2
6.3V ZD1
100K C51 0R
GND
APD240 4
0603 100n C57 C65 C66 C58 C53 VO 0805 + C63
TH 4 Ohm/4A GND C52 C56 C54 C55 EC 3
+
GND R49 C64 470uFC59 C60 C61

+
100nF 1nF
J1 TH1 15k 1 8 100n 4.7uF 220uF 470pF 10uF C67 10uF 470uF
GND TP22 FB5 BOOT PH 0.1uF 10V 0.1uF 0.1uF C62 220uF 6.3V 6.3V 0.1uF 1nF
2 7 R50
1
K 1
3
VI N GND
6 10.2k
0.1uF 10V AGND K
2 EN COMP
C68 C69 0 Ohm/ BD600R/2A 4 5
C70 SS VS ENS E AGND
7A 100n
+
470uF
10n TPS54331 SOIC8 GND RFGND
IC5 C71 C72
39pF R51
R52 C73 0.047u
R53 1.87k
GND GND GND 5.1k
10n
49.9k
GND GND GND

GND
L L
M M
Sub Woofer Main
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
40

EXPLODED VIEW SOUNDBAR
Please refer to the last chapter for the part list.
44 43 42 41 40 39 6 38 37 36 35 34 33
32
31
30
29
28
27
26
25
24
17
23
22
21
19 20
18 6
6 17
16
14 15
12 13
11
8 9 10
5 6 7
3 4
2
1
WARNING:
Parts marked with this symbol z have critical characteristics.
Use ONLY replacement parts recommended by the manufacturer.
41

SUB-ASSEMBLY VIEW
34
39
40
Ref-No.A
Front Assy with Tweeter speakers
37
36
24
19
6 20 22 23
Ref-No.B
Rear assy with Bluetooth antenna & cable
1 2 3 18
6
16
10 14
22
Ref-No.C Ref-No.D Ref-No.E

Button assy Button PWB assy Main board assy
43 42
38
44
29
28
4 5 7
42

EXPLODED VIEW SUBWOOFER
39
38
37
36
35
34
33
2 8 29 30 31 32
27
2 25 26
21 22 23 4
19 20
18
18
17
1 16
13 14 5
12
9 10 11
7 8
5 6
3 4
1 2
43

SUB-ASSEMBLY VIEW
Ref-No.G
Cabinet assy
39 38
Ref-No.F
Grill assy
21 22
1 2 3
20
6 12
5 9 10 11
Ref-No.H
Rear plate assy with AC socket
27 29 30 33
23
44

PACKING VIEW
13
12
12 11
10
10
14 8
4
15 7
REF-No.J
16 6
REF-No.K
4
17
1
18
39
38
34 35 36 37
33
32
31
30
29
28 21 26
27
26
25
24
23 33
22 32
21 31
20 27 30
19 29
20 28
19
15
23 25
45

Soundbar
Soundbar
※Parts indicated by "nsp"on this table cannot be supplied.
※The parts li NOTE:The symbols in the column Remarks indicate the following destinations.
※This speaker can be ordered from one.
E3 : U.S.A. & Canada model E2 : Europe model E1C : China model E1 : Asia model JP : Japan model
REF No. Part No. Part Name Remarks Q'ty New Ver
Exproded & Sub assy
A 978402104380D Front Ass'y with Tweeter speakers ASWA00271-0008 1 *
1 － Logo (Denon) - 1 -
2 － Double side tape - 0.0004 -
3 － Soundbar Grill - 1 -
6 － GP Screw T3.0xL8xP1.06mm - 2 -
10 － Front Baffle - 1 -
14 － Tweeter frame (EVA For Tweeter Black) - 2 -
16 － 13mm Tweeter FIY-40R/8Ω with phase plug - 2 -
18 － C/W 2468#20 Black/Blue/Black/Red 450/550mm - 1 -
22 － DTI-Rubber Grommet - 2 -
36 － EVA L77XW16XT1.5 - 2 -
37 － C/W 2468#20 Black/Blue/Black/Red 330/430mm - 1 -
B 978406101460D Rear Ass'y with Bluetooth antenna and cable ASWA00271-0009 1 *
6 － GP Screw T3.0xL8xP1.06mm - 4 -
19 － Rear Port Tube - 2 -
20 － Non-weave Sheet - 2 -
22 － DTI-Rubber Grommet - 2 -
23 － Cabinet - 1 -
24 － Silicon Pad - 2 -
34 － Key Seal - 2 -
39 － Double side tape - 1 -
40 － Antenna PCBA ASS'Y - 1 -
C 978411103070D BUTTON Ass'y ASWA00271-0018 1 *
42 － EVA L350XW10XT1.0 BLACK - 1 -
43 － Non Weave Sheet Black,L200xW2.5xT0.2 - 1 -
44 － Button PC black painted - 1 -
D 978639101340D BUTTON PCBA Ass'y (with other parts) ASWA00271-0051 1 * 2
4 － BUTTON PCBA Ass'y - 1 -
5 － Foam For Button - 1 -
7 － DOUBLE SIDE TAPE W10mmxL50M/RL - 0.005 -
38 － FPC CABLE 16pin P=0.5mm - 1 -
E 978639101330D Sound bar MAIN PCBA ASS'Y (with other parts) ASWA00271-0049 1 * 2
28 － Sound bar MAIN PCBA ASS'Y - 1 -
29 － EVA_17-Ф11×Ф5 38degree Black - 1 -
8 － EVA 4-OD6MM T= 0.5MM - 1 -
9 － EVA L25xW9xT1 - 8 -
11 978471100850D Gasket ASWA00271-0010 4 *
12 978182100190D WIRELESS MODULE/SMSC SBAR ASWA00271-0054 1 *
15 978323100440D Soundbar Main Speaker ASWA00273-0002 2 *
21 978471100860D Silicon Feet ASWA00271-0011 2 *
41 978639101350D IR PCBA Ass'y ASWA00271-0050 1 * 2
25 nsp Rating Label (US) for soundbar ASWA00271-0012 1 * 2
25 nsp Rating Label (EU) for soundbar ASWA00271-0013 1 * 2
27 － SCREW T3.0x1.06PxL10mm - 5 -
33 nsp Caution (Certification) Label (US) ASWA00271-0015 1 *
33 nsp Caution (Certification) Label (EU) ASWA00271-0016 1 *

Subwoofer
Subwoofer
※The parts l NOTE:The symbols in the column Remarks indicate the following destinations.
※This speaker can be ordered from one.
F 978402104370D Grill Ass'y ASWA00271-0001 1 *
1 - Logo (Denon) - 1 -
2 - DOUBLE SIDE TAPE - 0.0004 -
3 - Sub-Grill - 1 -
G 978401100900D Cabinet Ass'y ASWA00271-0002 1 *
5 - Sub-Trim - 2 -
6 - Screw T3.5x1.27PxL10mm - 4 -
9 - Sub-cabinet MDF - 1 -
10 - EVA 38degree Natural Black - 2 -
11 - EVA 38degree Natural Black - 2 -
12 - DHT-S514 Sub-Wadding Black - 2 -
21 - Screw T4.0x2.85PxL20mm - 2 -
22 - Bended Port(right and left) - 1 -
38 - Port Front - 1 -
39 - EVA L216xW16xT1 - 1 -
H 978406101430D Rear plate assy with AC socket ASWA00271-0005 1 *
23 - C/W 2P UL 1617#22 RED/BLACK - 1 -
27 - Shrinkage tube - 1 -
29 - EVA_L103xW9xT1 - 4 -
30 - Sub Rear Plate - 1 -
33 - AC Socket 2P - 1 -
4 nsp Non Weave Sheet_Black - 2 -
8 978323100430D Woofer Speaker (Woofer 60W 8ohm) ASWA00273-0001 1 *
13 978189100630D DHT-S514 SUB WOOFER AMP ASS'Y with Clip 4 pieces ASWA00271-0045 1 *
14 978182100180D WIRELESS MODULE/SMSC Subwoofer ASWA00271-0048 1 *
15 978606502360D FPC cable (FPC CABLE 26pin P=0.5mm 55mm) ASWA00271-0046 1 *
! 17 978639101110D SMPS (Open Frame DC24V 2.5A 60W) ASWA00263-0024 1 2
19 978611500910D Cable (C/W 4P 2468#18 RED/BLACK) ASWA00271-0044 1 *
21 nsp SCREW T4.0x2.85PxL20MM CED COATING - 2 -
25 978189100640D SUB Volume PCBA Ass'y ASWA00271-0047 1 *
28 978471100830D Gasket (EVA BLACK L250.0xW3.0xT1.0) ASWA00271-0004 1 *
34 978411103060D Knob (TVee26-VR Knob) ASWA00238-0019 1 *
37 978544104320D Rating Label (US) for Sub ASWA00271-0006 1 *
37 978544104330D Rating Label (EU) for Sub ASWA00271-0007 1 *

Packing
Packing
※The parts listed bNOTE:The symbols in the column Remarks indicate the following destinations.
1 978531104140D Gift Box (US) ASWA00271-0019 1 *
1 978531104150D Gift Box (EU) ASWA00271-0020 1 *
2 nsp Seal label - 2 -
J 978533102300D Top Polyfoam Corner EPS with cardboad ASWA00271-0021 1 *
14 - Cardboard (For Polyfoam Corner) - 1 -
4 - Polyfoam Corner EPS - 4 - 2
K 978533102160D Bottom Polyfoam Corner EPS with cardboad ASWA00271-0022 1 *
3 - Cardboard (For Polyfoam Corner) - 1 -
4 - Polyfoam Corner EPS - 4 - 2
6 nsp Soft Bag for Sub - 1 -
7 978537100370D Paper Card ASWA00271-0024 1 *
10 978533102170D Middle Polyfoam EPS ASWA00271-0025 2 *
12 978533102180D Left & Right Polyfoam EPS ASWA00271-0026 2 *
13 nsp Soft Bag for Soundbar - 1 -
15 978536100110D Accessory Box ASWA00271-0028 1 *
16 978537100410D Paper Sleeve (For Accessory Box) ASWA00271-0029 1 * 2
18 nsp Carton label (US) - 1 -
18 nsp Carton label (EU) - 1 -
! 20 978693100330D AC Adaptor (Black DC2.5A 24V AC100-240V) ASWA00271-0052 1 *
19 978537100380D cardboard for Accessary Box ASWA00271-0033 2 *
21 978307101600D Remote Controller (Same as DHT-T100) ASWA00263-0011 1 -
- 978407100370D Plastic Foot (H19) ASSY ASWA00271-0034 1 *
23 - Plastic Foot (H19) - 2 -
24 - Rubber Feet Silicon - 1 -
22 - EPE bag - 1 -
- 978407100380D Plastic Foot (H31) ASSY ASWA00271-0035 1 *
25 - Plastic Foot (H31) - 2 -
24 - Rubber Feet Silicon - 1 -
22 - EPE bag - 1 -
26 978407100390D Rubber Feet 4PCS ASWA00271-0036 1 *
! 27 978611500920D Power Cable L=1m (US) ASWA00271-0053 1 *
! 27 978611500940D Power Cable L=1m (EU) ASWA00238-0021 1 *
! 28 978611500930D Power Cable L=2m (US) ASWA00271-0055 1 *
! 28 978611500950D Power Cable L=2m (EU) ASWA00238-0023 1 *
32 nsp RCA Stereo Cable 2P 100mm - 1 -
31 nsp Stereo Cable 1P 1P 3.5mm BLACK 1M A/B=3.5mm - 1 -
30 nsp Optical Cable 1P Black 1M - 1 -
29 978623100040D IR Blaster(Mono Cable+IR LED Black 1000mm) ASWA00271-0059 1 *
33 nsp HDMI Cable 1500mm - 1 -
39 35201027400AD CD disc(US) ASWA00271-0037 1 *
39 35201027600AD CD disc (EU) ASWA00271-0038 1 *
8 54111114000AD Quick Start Guide (US) / (EU) ASWA00271-0040 1 *
9 nsp Polyfoam EPS_Density 20kg/m3 White - 4 -

Service Manual: DHT-S514

Uploaded by

Copyright:

Available Formats

Service Manual: DHT-S514

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Service Manual: DHT-S514

Uploaded by

Copyright:

Available Formats

e Ver.

HOME THEATER SYSTEM (DHT-S514) consists of FRONT SPEAKER

S0807-0V02DM/DG1312 Copyright 2013 D&M Holdings Inc. All rights reserved.

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

What you can do with this manual

Search for a Ref. No. (phrase)

You can use the search function in Acrobat Reader to

1.Press Ctrl+Shift+F on the keyboard.

2.Enter the Ref. No. you want to search for in the

3.Click an item on the list.

Downloaded from www.Manualslib.com manuals search engine

Add notes to this data (Sign) Magnify schematic / printed wiring

• When you want to move the area shown, hold

[Example using Adobe Reader 9]

Print a magnified part of the manual

2. On the "File" menu, click "Print".

3. Configure the following settings in the Print dialog box.

4. Click the Print button to start printing.

Downloaded from www.Manualslib.com manuals search engine

• The Loupe Tool window appears on the screen.

[Example using Adobe Reader 9] [Example using Adobe Reader 9]

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

NOTE FOR PARTS LIST

1. Ground for Human

CE : Aluminum foil 0J : 6.3 V F : ±1% HS : High stability type

* Capacity (electrolyte only)

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

1. Unplug sound bar from wall.

USB cable : A-Mini B : 1 Set

978559100040D : Clip release jig : 1 Set

Downloaded from www.Manualslib.com manuals search engine

MAIN PWB ASSY

ANTENNA PWB ASSY DWAM83-TB PWB ASSY

IR PWB ASSY BUTTONS PWB ASSY

GRILL SUB REAR PLATE

SUB AMP PWB ASSY

Downloaded from www.Manualslib.com manuals search engine

[View from the front]

1. MAIN PWB ASSY

Shooting direction B (Rear side)

(3) Remove the FFCs.

Shooting direction C (Bottom side)

(4) Remove the screws.

Downloaded from www.Manualslib.com manuals search engine

Shooting direction B (Rear side)

(2) Remove the cabinet.

Remove the Sillicon Feet

Shooting direction C (Bottom side)

3. DWAM83-TB PWB ASSY

Remove the Waddings.

Downloaded from www.Manualslib.com manuals search engine

Shooting direction D (Top side)

(2) Remove the screws.

6. SUB AMP and SMSC MODULE DWAM83-TB PWB

Remove the AMP PWB

• When you want to move the area shown, hold

NO 1. Check the soldering of D8, C315, C316, L46, R235, R236