MARYLAND METRICS -- THREAD DATA CHARTS (9) http://mdmetric.com/tech/thddat9.

htm#uc

MARYLAND METRICS
THREAD DATA CHARTS
UNC, UNF, & UNEF Thread ANSI B1.1
Click here to return to the thread data chart page index.

UNC Thread ANSI B1.1

UNC - Unified Coarse Thread. The old definition NC - National Coarse is comparable with the metric
thread. The new term UNC is comparable with the ISO metric thread. NC and UNC threads are
interchangeable, in an similar manner to the metric and the ISO metric thread.
Nominal Major Major Tapping TPI Pitch
Diameter Diameter Diameter Drill Size mm
Inch mm mm
1 - 64 UNC 0,073 1,854 1,50 64 0,397
2 - 56 UNC 0,086 2,184 1,80 56 0,453
3 - 48 UNC 0,099 2,515 2,10 48 0,529
4 - 40 UNC 0,112 2,845 2,35 40 0,635
5 - 40 UNC 0,125 3,175 2,65 40 0,635
6 - 32 UNC 0,138 3,505 2,85 32 0,794
8 - 32 UNC 0,164 4,166 3,50 32 0,794
10 - 24 UNC 0,190 4,826 4,00 24 1,058
12 - 24 UNC 0,216 5,486 4,65 24 1,058
1/4" - 20 UNC 0,250 6,350 5,35 20 1,270
5/16" - 18 UNC 0,313 7,938 6,80 18 1,411
3/8" - 16 UNC 0,375 9,525 8,25 16 1,587
7/16" - 14 UNC 0,438 11,112 9,65 14 1,814
1/2" - 13 UNC 0,500 12,700 11,15 13 1,954
9/16" - 12 UNC 0,563 14,288 12,60 12 2,117
5/8" - 11 UNC 0,625 15,875 14,05 11 2,309
3/4" - 10 UNC 0,750 19,050 17,00 10 2,540
7/8" - 9 UNC 0,875 22,225 20,00 9 2,822
1" - 8 UNC 1,000 25,400 22,85 8 3,175

1 of 3 6/4/2010 1:52 PM
MARYLAND METRICS -- THREAD DATA CHARTS (9) http://mdmetric.com/tech/thddat9.htm#uc

1 1/8" - 7 UNC 1,125 28,575 25,65 7 3,628

1 1/4" - 7 UNC 1,250 31,750 28,85 7 3,628
1 3/8" - 6 UNC 1,375 43,925 31,55 6 4,233
1 1/2" - 6 UNC 1,500 38,100 34,70 6 4,233
1 3/4" - 5 UNC 1,750 44,450 40,40 5 5,080
2" - 4 1/2 UNC 2,000 50,800 46,30 4,5 5,644
2 1/4" - 4 1/2 UNC 2,250 57,150 52,65 4,5 5,644
2 1/2" - 4 UNC 2,500 63,500 58,50 4 6,350
2 3/4" - 4 UNC 2,750 69,850 64,75 4 6,350
3" - 4 UNC 3,000 63,500 71,10 4 6,350
3 1/4" - 4 UNC 3,250 82,550 77,45 4 6,350
3 1/2" - 4 UNC 3,500 88,900 83,80 4 6,350
3 3/4" - 4 UNC 3,750 95,250 90,15 4 6,350
4" - 4 UNC 4,000 101,600 96,50 4 6,350
UNC Thread

Click here to return to the thread data chart page index.

UNF Thread ANSI B1.1

UNF - Unified National Fine Thread. Similar to UNC. UNC and UNF threads are the choices for the
customary Unified screws and nuts.
Nominal Major Major Tapping Drill TPI Pitch
Diameter Diameter Diameter Size mm
Inch mm mm
0 - 80 UNF 0,060 1,524 1,25 80 0,317
1 - 72 UNF 0,073 1,854 1,55 72 0,353
2 - 64 UNF 0,068 2,184 1,90 64 0,397
3 - 56 UNF 0,099 2,515 2,15 56 0,453
4 - 48 UNF 0,112 2,845 2,40 48 0,529
5 - 44 UNF 0,125 3,175 2,70 44 0,577
6 - 40 UNF 0,138 3,505 2,95 40 0,635
8 - 36 UNF 0,164 4,166 3,50 36 0,705
10 - 32 UNF 0,190 4,826 4,10 32 0,794
12 - 28 UNF 0,216 5,486 4,70 28 0,907
1/4" - 28 UNF 0,250 6,350 5,50 28 0,907
5/16" - 24 UNF 0,313 7,938 6,90 24 1,058
3/8" - 24 UNF 0,375 9,525 8,50 24 1,058
7/16" - 20 UNF 0,438 11,112 9,90 20 1,270
1/2" - 20 UNF 0,500 12,700 11,50 20 1,270
9/16" - 18 UNF 0,563 14,288 12,90 18 1,411
5/8" - 18 UNF 0,625 15,875 14,50 18 1,411
3/4" - 16 UNF 0,750 19,050 17,50 16 1,587
7/8" - 14 UNF 0,875 22,225 20,40 14 1,814

2 of 3 6/4/2010 1:52 PM
MARYLAND METRICS -- THREAD DATA CHARTS (9) http://mdmetric.com/tech/thddat9.htm#uc

1" - 12 UNF 1,000 25,400 23,25 12 2,117

1 1/8" - 12 UNF 1,125 28,575 26,50 12 2,117
1 1/4" - 12 UNF 1,250 31,750 29,50 12 2,117
1 3/8" - 12 UNF 1,375 43,925 32,75 12 2,117
1 1/2" - 12 UNF 1,500 38,100 36,00 12 2,117
UNF Thread

Click here to return to the thread data chart page index.

UNEF Thread ANSI B1.1

UNEF - Unified Extra Fine Thread, which is used for special purposes.
Nominal Major Major Tapping Drill TPI Pitch
Diameter Diameter Diameter Size mm
Inch mm mm
12 - 80 UNEF 0,216 5,486 4,80 32 0,794
1/4" - 32 UNEF 0,250 6,350 5,70 32 0,794
5/16" - 32 UNEF 0,313 7,938 7,25 32 0,794
3/8" - 32 UNEF 0,375 9,525 8,85 32 0,794
7/16" - 28 UNEF 0,438 11,112 10,35 28 0,907
1/2" - 28 UNEF 0,500 12,700 11,80 28 0,907
9/16" - 24 UNEF 0,563 14,288 13,40 24 1,058
5/8" - 24 UNEF 0,625 15,875 15,00 24 1,058
11/16" - 24 UNEF 0,688 17,462 16,60 24 1,058
3/4" - 20 UNEF 0,750 19,050 18,00 20 1,270
13/16" - 20 UNEF 0,813 20,638 19,60 20 1,270
7/8" - 20 UNEF 0,875 22,225 21,15 20 1,270
15/16" - 20 UNEF 0,938 23,812 22,70 20 1,270
1" - 20 UNEF 1,000 25,400 24,30 20 1,270
1 1/16" - 18 UNEF 1,063 26,988 25,80 18 1,411
1 1/8" - 18 UNEF 1,125 28,575 27,35 18 1,411
1 1/4" - 18 UNEF 1,250 31,750 30,55 18 1,411
1 5/16" - 18 UNEF 1,313 33,338 32,10 18 1,411
1 3/8" - 18 UNEF 1,375 34,925 33,70 18 1,411
1 7/16" - 18 UNEF 1,438 36,512 35,30 18 1,411
1 1/2" - 18 UNEF 1,500 38,100 36,90 18 1,411
1 9/16" - 18 UNEF 1,563 39,688 38,55 18 1,411
1 5/8" - 18 UNEF 1,625 41,275 40,10 18 1,411
1 11/16" - 18 UNEF 1,688 42,862 41,60 18 1,411
UNEF Thread
Click here to return to the thread data chart page index.

Phones: (800) 638-1830 or (410) 358-3130 are available Monday-Friday 8:30 AM to 5:30 PM Eastern time.
Faxes: (800) 872-9329 or (410) 358-3142 & E-mail are available anytime.
Warehouse & showroom hours are Monday-Friday 10 AM to 5:30 PM.
[ To: Maryland Metrics home page ] [ To: Maryland Metrics Product Guide ] [ e-mail to Maryland Metrics ]
Please note that all Trademarks and Tradenames are the property of their respective owners.
copyright 1998, 2000, 2006 maryland metrics -- all rights reserved -- ver bb14h thddat9.htm

3 of 3 6/4/2010 1:52 PM