Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 550 views

    SRAM Data Save Operation On DPL/MDI

    Uploaded by

    Wazabi Moo
    The document provides instructions for saving data on a FANUC DPL/MDI controller using SRAM or RS232. It describes pressing button combinations like (0) and (.) to save data to addresses 6 and 7 using SRAM. It also lists the RS232 channel and baud rate settings needed to save data via an I/O channel using RS232 communication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SRAM Data Save Operation On DPL/MDI

    Uploaded by

    Wazabi Moo
    550 views3 pages
    The document provides instructions for saving data on a FANUC DPL/MDI controller using SRAM or RS232. It describes pressing button combinations like (0) and (.) to save data to addresses 6 and 7 using SRAM. It also lists the RS232 channel and baud rate settings needed to save data via an I/O channel using RS232 communication.

    Original Title

    MDI_DPL

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for saving data on a FANUC DPL/MDI controller using SRAM or RS232. It describes pressing button combinations like (0) and (.) to save data to addresses 6 and 7 using SRAM. It also lists the RS232 channel and baud rate settings needed to save data via an I/O channel using RS232 communication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    550 views3 pages

    SRAM Data Save Operation On DPL/MDI

    Uploaded by

    Wazabi Moo
    The document provides instructions for saving data on a FANUC DPL/MDI controller using SRAM or RS232. It describes pressing button combinations like (0) and (.) to save data to addresses 6 and 7 using SRAM. It also lists the RS232 channel and baud rate settings needed to save data via an I/O channel using RS232 communication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    FANUC data save Operation on DPL/MDI

    ***SRAM data save Operation on DPL/MDI

    1. pressing the ( 0 ) and ( . ) it same 6 and 7 on CRT


    2. pressing the ( 1 ) and ( . ) it same 1 and 7 on CRT

    pressing the pressing the


    (0) and (.) or
    (1) and (.) ( )

    FANUC

    FANUC THAI LIMITED Page 1／3


    Design by : Jaturong S. FA Division 17/09/2020
    ***Data save Operation on DPL/MDI by RS232

    1. RS232 setting on DPL/MDI

    I/O channel = 0

    I/O channel = 1

    Baud rate for I/O channel = 0

    Baud rate for I/O channel = 1

    Baud rate for I/O channel

    FANUC

    FANUC THAI LIMITED Page 2／3


    Design by : Jaturong S. FA Division 17/09/2020
    2. Select mode and setting according to the table

    FANUC

    FANUC THAI LIMITED Page 3／3


    Design by : Jaturong S. FA Division 17/09/2020

    You might also like