Edison Aliagan Walit
Edison Aliagan Walit
Involving in Different projects for more than 11 years, Oil and Gas, Coal Power Plant, Hydro Electric Power Plant, Diesel Power
Plant, Manufacturing Plant, Building and bridge as QA/QC Mechanical Engineer, Welding Engineer, Senior QC Engineer, NDT
Supervisor, Welding Inspector, NDT Inspector and site engineer.
Work Experience
Name of Project : 2 X 300MW Masinloc Power Plant Expansion Project (Coal fired Power Plant)
Position Held : QA/QC Mechanical Engineer (Welding, Piping, NDT, Static, Rotating and Coating)
Employer : Ventanas Philippines Construction Incorporated (POSCO E&C)
Address : Brgy. Bani Masinloc Zambales, Philippines
Inclusive dates : September 20, 2017 to Present
Job Descriptions:
Reviewed Welding Procedure Specification (WPS), Procedure Qualification Record (PQR), Inspection and Test Plan
(ITP) and NDT Procedure in accordance to project specification and applicable code and standard.
Conducted material inspection and Verifies mill certificate and other related reports of incoming raw materials in
conformance to project and client specification.
Conducted surveillance and audit during Fabrication and Field Erection of Structural Steel, Piping, Storage Tanks and
Boiler Tube accordance to approved project Specifications, plans, drawing and applicable code and standard.
Reviewed Nondestructive Examination Testing Report (VT, UT, MT, PT, and RT) and Radiographic Film.
Supervised and witnessed Welder Performance Qualification Record (WQTR) and maintained the records to ensure the
welder are qualified and certificate update in accordance to company procedure.
Conducted welding Joint Preparation inspection, Joint fit up and dimensional inspection and weld visual inspection as per
approved welding procedure specification (WPS) and drawing in fabrication and field welding works.
Reviewed Test Package and witnessed hydrostatic of piping and tanks.
Walk down inspection and prepared final punchlist with the client
Verify preheat; inter pass Temperature and heat treatment (PWHT) before, during and after welding.
Witnessed sand blasting, Painting Coating and Wrapping, Dry Film Thickness and Holiday Test of structural steel, piping
tanks and Coal Silo.
Managed subcontractor activities and welding repair to ensure all welding followed in accordance to WPS and ensured
welding repair are fulfilled.
1
familiar with the following code and standard AWS D1.1, ASME IX, ASME V, ASME VIII Div. 1, ASME B31.1, ASME
B31.3, API 1104, API 650 and API 686.
Knowledge of the weldability of ASME P-No. 1, 3, 4, 5A, 5B and 8 base metals and dissimilar metal, selecting the welding
process, filler metals, pre- heat and heat treatment (PWHT).
Conducted foundation inspection for static and rotating equipment, levelling, mounting plate, bolt projection and centering.
Witnessed pre- alignment prior to grouting and final alignment of rotating equipment.
Inspection of static equipment such horizontal and vertical pressure vessel elevation, centering and plumbness prior to
grouting.
Work Experience
Job Descriptions:
Developed and qualified new Welding Procedure Specification (WPS) and procedure qualification record (PQR) in
accordance to client specification and applicable code and standard.
Developed welding repair procedure and managed welding repair technique any welding failure in the plant and apply
applicable nondestructive testing.
Developed nondestructive examination procedure (VT, MT, PT, UT, and RT) in accordance to applicable code and
standard and advance knowledge in nondestructive examination.
Supervised and witnessed Welder Performance Qualification Record (WQTR) and maintained the records to ensure the
welder are qualified and certificate update in accordance to company procedure.
Conducted inspection in a mechanical discipline including field construction installation, repair and maintenance such as
boiler drum, dearator, condenser, storage tank, pressure vessel piping, steel structure, valve installation and replacement,
boiler tube leakage at furnace and HRA area to identify the failure mechanism.
Evaluate NDT test result and Review Radiograph Film and prepared ultrasonic thickness survey report in boiler tube,
piping, tanks and pressure vessel.
Responsible for the selection of welding equipment, accessories, welding consumable, welding process /es used
advancement of welding techniques and knowledge of the weldability of ASME P-No. 1, 3, 4, 5A, 5B and 8 base metals,
dissimilar metal welding and repair of cast iron, pre-heat and heat treatment (PWHT)
Managed welding activities including subcontractor and welding repair to ensure all welding followed in accordance to
WPS including welding repair are fulfilled.
familiar with the following code and standard AWS D1.1, ASME IX, ASME V, ASME VIII Div. 1, ASME B31.1, ASME
B31.3, API 1104 and API 650.
Managed and Coordinates subcontractor during repair and maintenance work activities in the plant.
Prepared field inspection report and warranty claim report during commissioning period.
Work Experience
Position Held : Senior QC Engineer / NDT Supervisor / Welding Inspector / NDT Inspector
Name of Employer : Sta. Clara International Corporation / XWELL Testing Services Inc.
Address : Gov. Drive Cabilang Baybay Carmona, Cavite, Philippines
Inclusive dates : July 14, 2008 to March 28, 2014 (5 Years and 8 Months)
Job Descriptions:
Developed Inspection and Test Plan (ITP), Quality Assurance Plan (QAP), Fabrication procedure and NDT procedure.
Developed welding procedure specification (WPS) and prepared procedure qualification record (PQR) as per Project and
client specification in accordance to applicable code and standard.
2
Reviewed subcontractor ITP, WPS, and PQR, Quality Assurance Plan (QAP), and NDT procedure, fabrication procedure,
blasting and painting procedure and material certificates in accordance to project specification and applicable code and
standard.
Supervised and witnessed Welder Performance Qualification Record (WPQR) as per Project and client requirements in
accordance to applicable code and standard.
Supervised and trained Jr. QC Engineer, NDT Trainee, NDT Level 1 and NDT Level 2 in Welding Inspection and NDT
Inspection (VT, PT, MT, UT and holiday testing).
Conducted material inspection and Verifies mill certificate and other related reports of incoming raw materials in
conformance to project and client specification.
Conducted surveillance and audit during Fabrication and Field Erection of Structural Steel, Piping and storage Tanks
according to approved project Specifications, plans, drawing and applicable code and standard.
Conducted welding Joint Preparation inspection, Joint fit up and dimensional inspection and weld visual inspection as per
approved welding procedure specification (WPS) and drawing in fabrication and field welding works.
Performed Nondestructive Testing using Visual Inspection (VT) Ultrasonic Examination (UT), Magnetic Particle
Examination (MT), liquid Penetrant Examination (PT) and Holiday Test in accordance to approved company NDT
procedure.
Reviewed Nondestructive Examination Testing Report (VT, UT, MT, PT, and RT) and Radiographic Film.
Prepared and reviewed Test Package and witnessed hydrostatic of piping and tanks
familiar with the following code and standard AWS D1.1, ASME IX, ASME V, ASME VIII Div. 1, ASME B31.1,ASME
B31.3, API 1104 and API 650.
Knowledge of the weldability of ASME P-No. 1, 3, 4, 5A, 5B and 8 base metals and dissimilar metal, selecting the welding
process, filler metals, pre- heat and heat treatment (PWHT).
Witnessed sand blasting and painting of structural steel, piping and tanks.
Carry out supplier and vendor material inspection and prepare report.
3
Monde Nissin Noodles Building Manufacturing Plant
Balibago Sta. Rosa Laguna, Philippines
Scope of Work: (Structural Steel, Piping, Coating and NDT)
Work Experience
Job Descriptions:
Supervises the work activities of the project site to assure the successful implementation of the project in relation to the
company budget in terms of money, time and clients contract requirements satisfaction.
Assist the Manager in the review and evaluation periodically of the actual performance of the project including assign of
personnel.
Attend the periodic meeting as required by the project as well as the management.
Coordinate and discuss problems encountered in the implementation of work to the designer, project management, group
owner representative, or the other trade contractors and recommends solutions to the problem.
Supervised installation of Piping, Plumbing Fixture and Fire Protection in a Building Construction.
Supervised fabrication of piping and welding works activities base on approved plan and drawing.
Directly Reported to the Project Manager assigned.
Work Experience
Job Descriptions:
Responsible for the installation of Mechanical Equipment such as compressor, cooling tower, pump, condenser, liquid
receiver, traveling crane, piping installations and welding works.
Supervised fabrication of condenser, Liquid Receiver, Oil Separator, Brine tank, piping and welding works activities on
Fabrication and on site.
Supervises the work activities of the project site to assure the successful implementation of the project.
Monitoring of the Quality Performance of Project as well as Welding works, Installation of Equipment, Piping Fittings prior
to welding and Material Inspections
Directly Reported to the Project Manager assigned.
4
CSWIP 3.1 Welding Inspector (Level 2)
August 7, 2017 to August 11, 2017
Shah Alam Selangor Darul Ehsan Malaysia
Philippine Nuclear Research Institute / Philippine Society for Nondestructive Testing Inc. (PNRI / PSNT)
National Training Course on Nondestructive Testing ULTRASONIC TESTING (UT) LEVEL 3
September 9, 2013 to September 23, 2013
Diliman Quezon City, Philippines
Philippine Nuclear Research Institute / Philippine Society for Nondestructive Testing Inc. (PNRI / PSNT)
National Training Course on Nondestructive Testing LIQUID PENETRANT TESTING (PT) LEVEL 3
June 17, 2013 to June 21, 2013
Diliman Quezon City, Philippines
Philippine Nuclear Research Institute / Philippine Society for Nondestructive Testing Inc. (PNRI / PSNT)
National Training Course on Nondestructive Testing MAGNETIC PARTICLE TESTING (MT) LEVEL 3
June 24, 2013 to June 28, 2013
Diliman Quezon City, Philippines
Philippine Nuclear Research Institute / Philippine Society for Nondestructive Testing Inc. (PNRI / PSNT)
National Training Course on Nondestructive Testing RADIOGRAPHIC TESTING (RT) LEVEL 2
February 27 to March 9, 2012
Diliman Quezon City, Philippines
Philippine Nuclear Research Institute / Philippine Society for Nondestructive Testing Inc. (PNRI / PSNT)
National Training Course on Nondestructive Testing ULTRASONIC TESTING (UT) LEVEL 2
September 15, 2008 to September 26, 2008
Diliman Quezon City, Philippines
5
Philippine Nuclear Research Institute / Philippine Society for Nondestructive Testing Inc. (PNRI / PSNT)
National Training Course on Nondestructive Testing LIQUID PENETRANT TESTING (PT) LEVEL 2
February 6, 2012 to February 10, 2012
Diliman Quezon City, Philippines
Philippine Nuclear Research Institute / Philippine Society for Nondestructive Testing Inc. (PNRI / PSNT)
National Training Course on Nondestructive Testing MAGNETIC PARTICLE TESTING (MT) LEVEL 2
February 13, 2012 to February 17, 2012
Diliman Quezon City, Philippines
Organization affiliated
1. Computer literate AUTO CADD, MS Word, Excel, Power Point and Internet.
2. Hands on experienced welding inspection, Painting Inspection and nondestructive examination (VT, PT, MT, UT, RT),
quality control and using different equipment such as different welding gauges, surface profile gauge, dry film thickness
gauge, holiday detector, PT Kit, Magnetic yoke, bench type MT equipment, UTG equipment (Olympus and GE), UT Flaw
(Olympus and GE) and Gamma 880 equipment.
3. Knowledge in the proper installation and shaft alignment of mechanical plant, rotating equipment like pump and motor,
compressor, cooling tower, fans and blower, agitator, Pressure vessel and similar mechanical equipment.
Educational Attainment
Secondary Education
Sergio Osmeña Sr. High School
Del Monte Ave. cor. Araneta Ave. Quezon City Philippines
1995 – 1997
Elementary Education
Geronimo Santiago Elementary School
San Miguel, Manila
1987-1995
6
Personal Data
Character References
I hereby certify that the above information is true and correct to the best of my knowledge and belief.