Farmakoterapi
Farmakoterapi
Farmakoterapi
Name
Summary
More than (7) Seven years’ experience in OIL & GAS Engineering Works: Material Inspection, Welding
Inspection, Non-Destructive Testing, Fabrication, Construction, Structural, Piping Fabrication,
Documentation, And Supervision. Available for assignment duties included all phases
supervision/inspection/expediting for various client, including but not limited to quality control, material
receipt verification and documentation review, in process and final visual/dimensional/weld quality
inspection, interfacing with project/client/supplier personnel regarding all phases of project requirements.
Education/Qualifications/Affiliations
• Diploma – Mechanical Engineering from Politeknik Negeri Cilacap
• Certified – Welding Inspector CSWIP 3.1, by TWI Certification Ltd, Granta Park, Great
Abington, Cambridge CB21 6AL, UK.
CSWIP CERT NO : 431566
• Certificate – Bacis Offshore Safety Induction and Emergency Training (BOSIET) With EBS
and Travel Safely by BOAT ( OPITO Approved Course, Code 5707) The Course Covers
Modules on Safety Induction, Helicopter Safety and Escape, Sea Survival and First AID, Fire
Figthing and Self Rescue and Boat Transfer.
CERTICATE NUMBER : 380957070510220007
• Awarded the Diploma of “International Welding Inspector” - International Welding
Inspection Personnel (IWIP) from International Institute of Welding (IIW) organizes by
Ministry of Industry/ Central for Material and Technical Product Bandung Approved Training
Body within IIW (International Institute of Welding).
• Certified - Welding Inspector, by Ministry of Industry, agency for research and development
of Industry – Center for material and technical product. With certificate no. :
0418.12.91.2824
• Certified - Radiographic Interpreter ASNT Level II, by SLV METROPOLITAN INDONESIA
(SLV) Industrial Training Center.
With certificate no. : 21.020/RI/SLV/IV/21
• Certified - Liquid Penetrant Testing ASNT Level II, by SLV METROPOLITAN INDONESIA
(SLV) Industrial Training Center.
With certificate no. : 21.013/PT/SLV/IV/21
• Certified - Magnetic Particle Testing ASNT Level II, by SLV METROPOLITAN INDONESIA
(SLV) Industrial Training Center.
With certificate no. : 21.013/MT/SLV/IV/21
Professional Experience
Date July - September
Employer PT. TIMAS SUPLINDO
Project Pipe Laying Bronang Plem And Bawal Plem Natuna Sea
Role QC Inspector (Flange Management)
Description • Review and determine what applicable WPS and qualification of welder to
carry out the welding activities for piling works.
Description Flange Management, Support Leak Test and Comisioning Test And Withness
Replace GasketAccroding to spesification gasket, Torque determination to
value as per code
Date September 2022 to Desember
Description • Review and determine what applicable WPS and qualification of welder to
carry out the welding activities for piling works.
Description Attended Pre inspection meeting &/or Pre production meeting. Review contract
doc/P.O, specifications, procedures, client spec etc. Review all fabrication and
quality procedure include ITP, MPS, WPS, Welder Certificate, NDT procedure
and NDT personnel qualification and certificate. Perform material inspection
as per specification, review Material certificate, ensure and check the pipe
clearly identified and traceability to the Mill certificates/Are the mill certificates
and tally list available site. Perform monitoring Inspection such as cutting lay
out, Fit Up, check dimensional. Monitoring welding activity, monitoring welding
parameter such as the Amperage, to be in accordance with the WPS used and
monitoring. Witness &/or monitoring Liner Pipe Manufacturing, witness MPI
and UT thickness measurement. Conducted visual Inspection, witness NDT
(MT, PT, UT, RT) Interpretation RT Film. Perform final inspection, final visual
inspection, length measurement, identification check, review and endorse
document report, inspection report and MDR.
Date October 2021 – January 2022
Description Attended daily and weekly meeting. Review, specifications, procedures, client spec
etc. Prepared all fabrication and quality procedure include ITP, WPS, Welder
Certificate, NDT procedure and NDT personnel qualification and certificate.
material inspection as per client specification, review Material certificate,
ensure and check the all the material clearly identified and traceability to the
Mill certificates/Are the mill certificates and tally sheet list available site.
Perform monitoring Inspection such as cutting lay out, Fit Up, Welding
inspection, Tally and check dimensional. Monitoring welding activity,
monitoring welding parameter such as the Amperage, Voltage, Filler metal,
Travel Speed Range, Wire Speed Range were verified found to be in
accordance with the WPS used and, visual inspection, surface roughness
check, witness MPI and UT thickness measurement. Conducted visual
Inspection, witness NDT (MT, UT, RT, PAUT) and Interpretation RT Film.
Prepared Root cause analysis for every repair (if any). Perform final
inspection, final visual inspection, length measurement, identification check,
review and endorse all document report, inspection report and MDR.
Description Attended Pre inspection meeting &/or Pre production meeting. Review contract
doc/P.O, specifications, procedures, client spec etc. Review all fabrication and
quality procedure include ITP, WPS, Welder Certificate, NDT procedure and
NDT personnel qualification and certificate. Perform material inspection as per
INPEX specification, review Material certificate, ensure and check the pipe
clearly identified and traceability to the Mill certificates/Are the mill certificates
and tally list available site. Perform monitoring Inspection such as cutting lay
out, Fit Up, check dimensional. Monitoring welding activity, monitoring welding
parameter such as the Amperage, Voltage, Filler metal, Position of weld, pre-
heat temperature, Interpass Temperature, Gas Floerate and Travel Speed
Range, Wire Speed Range were verified found to be in accordance with the
WPS used and monitoring &/or witness PWHT activity. Witness &/or
monitoring high fatigue grinding activity, visual inspection, surface roughness
check, witness MPI and UT thickness measurement. Conducted visual
Inspection, witness NDT (MT, PT, UT, RT) Interpretation RT Film. Spot witness
for full length drift ID test, monitoring thread storage compound applied, and
monitoring installation of protector and identification check. Perform final
inspection, final visual inspection, length measurement, identification check,
review and endorse document report, inspection report and MDR.
Date March 2020 – December 2020
Project PERTAMINA RU IV
Description Cooperate with any other Head to ensure that Quality System implemented in
work area. Ensuring that all inspection activities are planned and undertaken
in a timely manner Review and conduct the welder/welding operators and
procedure Qualification test, record and maintained. Liaising with MIGAS,
DEPNAKER, LR, ABS, and DNV for qualification &/or certification of Welding
Procedure and welder/welding operators.
Date May 2019 to July 2019
Description Attended daily and weekly meeting. Review, specifications, procedures, client spec
etc. Prepared all fabrication and quality procedure include ITP, WPS, Welder
Certificate, NDT procedure and NDT personnel qualification and certificate.
material inspection as per client specification, review Material certificate,
ensure and check the all the material clearly identified and traceability to the
Mill certificates/Are the mill certificates and tally sheet list available site.
Perform monitoring Inspection such as cutting lay out, Fit Up, Welding
inspection, Tally and check dimensional. Monitoring welding activity,
monitoring welding parameter such as the Amperage, Voltage, Filler metal,
Travel Speed Range, Wire Speed Range were verified found to be in
accordance with the WPS used and, visual inspection, surface roughness
check, witness MPI and UT thickness measurement. Conducted visual
Inspection, witness NDT (MT, UT, RT, PAUT) and Interpretation RT Film.
Prepared Root cause analysis for every repair (if any). Perform final inspection,
final visual inspection, length measurement, identification check, review and
endorse all document report, inspection report and MDR.
Description Attended daily and weekly meeting. Review, specifications, procedures, client spec
etc. Prepared all fabrication and quality procedure include ITP, WPS, Welder
Certificate, NDT procedure and NDT personnel qualification and certificate.
material inspection as per client specification, review Material certificate,
ensure and check the all the material clearly identified and traceability to the
Mill certificates/Are the mill certificates and tally sheet list available site.
Perform monitoring Inspection such as cutting lay out, Fit Up, Welding
inspection, Tally and check dimensional. witness MPI and UT thickness
measurement. Conducted visual Inspection, witness NDT (MT, PT, UT, RT)
Interpretation RT Film. Spot witness for full length drift ID test, monitoring
thread storage compound applied, and monitoring installation of protector and
identification check. Perform final inspection, final visual inspection, length
measurement, identification check, review and endorse document report,
inspection report and MDR. Issuing inspection release note for release for
shipment and load out.
Date May 2018 to September 2018
Description Attended Pre inspection meeting &/or Pre production meeting. specifications,
procedures, client spec etc. Review all fabrication and quality procedure include
ITP, WPS, Welder Certificate, NDT procedure and NDT personnel qualification
and certificate. Perform material inspection as per INPEX specification, review
Material certificate, ensure and check the pipe clearly identified and
traceability to the Mill certificates/Are the mill certificates and tally list
available site. Perform monitoring Inspection such as cutting lay out, Fit Up,
check dimensional. Monitoring welding activity, monitoring welding parameter
such as the Amperage, Voltage, Filler metal, Position of weld, pre-heat
temperature, Interpass Temperature, Gas Floerate and Travel Speed Range,
Wire Speed Range were verified found to be in accordance with the WPS used
and monitoring &/or witness PWHT activity. Witness &/or monitoring high
fatigue grinding activity, visual inspection, surface roughness check, witness
MPI and UT thickness measurement. Conducted visual Inspection, witness
NDT (MT, PT, UT, RT) Interpretation RT Film. Spot witness for full length drift
ID test, monitoring thread storage compound applied, and monitoring
installation of protector and identification check. Perform final inspection, final
visual inspection, length measurement, identification check, review and
endorse document report, inspection report and MDR. Issuing inspection
release note for release for shipment and load out.
Project SEPC MEG, Petroprod FPSO (Power Distribution Module), Ninggaloo Vision
FPSO (Electrical Switch Gear Room), Cidade de sao Mateous (Power
Distribution Module).
Description Liaising with QA/QC Head and any other function to ensure that Quality
System implemented in all work area. Perform material inspection, review
Material certificate. Perform visual, dimensional and final Inspection.
Controlling all QA/QC report such as material inspection log sheet, material
inspection report, material certificate, Drawing, Welding Inspection Summary
sheet, NDT report, NDT summary, Manufacture data record etc., Liaising with
all Document Control to ensure that Inspection Reports using proper forms
and met the Client requirements.