www.fairchildsemi.

com

KA431/KA431A/KA431L
Programmable Shunt Regulator

Features Description
• Programmable Output Voltage to 36 Volts The KA431/KA431A/KA431L are three-terminal adjustable
• Low Dynamic Output Impedance 0.20 Typical regulator series with a guaranteed thermal stability over
• Sink Current Capability of 1.0 to 100mA applicable temperature ranges. The output voltage may be
• Equivalent Full-Range Temperature Coefficient of set to any value between VREF (approximately 2.5 volts)
50ppm/°C Typical and 36 volts with two external resistors These devices have a
• Temperature Compensated for Operation Over Full Rated typical dynamic output impedance of 0.2W Active output
Operating Temperature Range circuitry provides a very sharp turn on characteristic,
• Low Output Noise Voltage making these devices excellent replacement for zener diodes
• Fast Turn-on Response in many applications.
TO-92

1
1. Ref 2. Anode 3. Cathode
8-DIP 8-SOP

1
1

1.Cathode 2.3.4.5.7.NC 1.Cathode 2.3.6.7.Anode

6.Anode 8.Ref 4.5.NC 8.Ref

Internal Block Diagram

CATHODE
REFERENCE

2.5 Vref

ANODE
CATHODE (K)

REFERENCE (R)

ANODE(A)

Rev. 1.0.6
©2002 Fairchild Semiconductor Corporation
KA431/KA431A/KA431L

Absolute Maximum Ratings

(Operating temperature range applies unless otherwise specified.)

Parameter Symbol Value Unit

Cathode Voltage VKA 37 V
Cathode Current Range (Continuous) IKA -100 ~ +150 mA
Reference Input Current Range IREF 0.05 ~ +10 mA
Power Dissipation
D, Z Suffix Package PD 770 mW
DIP Package 1000 mW
Junction Temperature TJ 150 °C
Operating Temperature Range TOPR -25 ~ +85 °C
Storage Temperature Range TSTG -65 ~ +150 °C

Recommended Operating Conditions

Parameter Symbol Min. Typ. Max. Unit
Cathode Voltage VKA VREF - 36 V
Cathode Current IKA 1.0 - 100 mA

2
 KA431/KA431A/KA431L

Electrical Characteristics
(TA = +25°C, unless otherwise specified)

KA431 KA431A KA431L

Parameter Symbol Conditions Unit
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.
Reference Input VKA=VREF,
VREF 2.450 2.500 2.550 2.470 2.495 2.520 2.482 2.495 2.508 V
Voltage IKA=10mA
Deviation of
Reference ∆VREF/ VKA=VREF,
Input Voltage ∆T IKA=10mA - - -
4.5 17 4.5 17 4.5 17 mV
Over- TMIN≤TA≤TMAX
Temperature
Ratio of Change
∆VREF/ ∆VKA=10
in Reference - -1.0 - 2.7 - -1.0 - 2.7 - -1.0 -2.7
∆VKA V-VREF
Input Voltage IKA
mV/V
to the Change in =10mA
∆VKA=36
Cathode - -0.5 -2.0 - -0.5 -2.0 - -0.5 -2.0
V-10V
Voltage
Reference Input IKA=10mA,
IREF - 1.5 4 - 1.5 4 - 1.5 4 µA
Current R1=10kΩ,R2=∞
Deviation of
Reference
IKA=10mA,
Input Current
R1=10kΩ,R2=∞ - - -
Over Full ∆IREF/∆T 0.4 1.2 0.4 1.2 0.4 1.2 µA
TA =Full Range
Temperature
Range
Minimum
Cathode Cur-
IKA(MIN) VKA=VREF - 0.45 1.0 - 0.45 1.0 - 0.45 1.0 mA
rent for
Regulation
Off - Stage
VKA=36V,
Cathode IKA(OFF) - 0.05 1.0 - 0.05 1.0 - 0.05 1.0 µA
VREF=0
Current
Dynamic VKA=VREF,
Impedance ZKA IKA=1 to 100mA - 0.15 0.5 - 0.15 0.5 - 0.15 0.5 Ω
f ≥1.0kHz

• TMIN = -25°C, TMAX = +85°C

3
KA431/KA431A/KA431L

Test Circuits

Figure 1. Test Circuit for VKA=VREF Figure 2. Test Circuit for VKA≥VREF

Figure 3. Test Circuit for lKA(OFF)

4
 KA431/KA431A/KA431L

Typical Performance Characteristics

Figure 4. Cathode Current vs. Cathode Voltage Figure 5. Cathode Current vs. Cathode Voltage

Figure 6. Change In Reference Input Voltage vs.

Figure7. Dynamic Impedance Frequency
Cathode Voltage

Figure 8. Small Signal Voltage Amplification vs. Frequency Figure 9. Pulse Response

5
KA431/KA431A/KA431L

Typical Performance Characteristics (Continued)

140

A
120 A VKA = Vref B
B VKA = 5.0 V @ IK = 10mA
C VKA = 10 V @ IK = 10mA C
IK, CATHODE CURRENT(mA)

100 D VKA = 15 V @ IK = 10mA

o
TA = 25 C
80

60

40

D
20

0
100p 1n 10n 100n 1µ 10µ

CL, LOAD CAPACITANCE

Figure 10. Stability Boundary Conditions

6
 KA431/KA431A/KA431L

Typical Application

R
V O = V ref  1 + ------1-
R R
V O =  1 + ------1- V ref V O =  1 + ------1- V ref
 R  R2  R 
2 2

Figure 12. Output Control for

Figure 11. Shunt Regulator Figure 13. High Current Shunt Regulator
Three--Te r minal Fixed Regulator

Figure 14. Current Limit or Current Source Figure 15. Constant-Current Sink

7
KA431/KA431A/KA431L

Mechanical Dimensions
Package
Dimensions in millimeters

TO-92
+0.25
4.58 –0.15

4.58 ±0.20

0.46 ±0.10
14.47 ±0.40

+0.10
1.27TYP 1.27TYP 0.38 –0.05
[1.27 ±0.20] [1.27 ±0.20]

3.60 ±0.20
3.86MAX

(0.25)
+0.10
0.38 –0.05
1.02 ±0.10

(R2.29)

8
 KA431/KA431A/KA431L

Mechanical Dimensions (Continued)

Package
Dimensions in millimeters

8-DIP

)
6.40 ±0.20

0.031
0.79
0.252 ±0.008

1.524 ±0.10
0.060 ±0.004
0.018 ±0.004
0.46 ±0.10
(
#1 #8

0.362 ±0.008
MAX

9.20 ±0.20
0.378
9.60

#4 #5

0.100
2.54
5.08 3.30 ±0.30
MAX 0.130 ±0.012
0.200
7.62
0.300 3.40 ±0.20 0.33
0.134 ±0.008 0.013 MIN

+0.10
0.25 –0.05
+0.004
0.010 –0.002
0~15°

9
KA431/KA431A/KA431L

Mechanical Dimensions (Continued)

Package
Dimensions in millimeters

8-SOP
0.1~0.25
MIN
0.004~0.001
1.55 ±0.20
0.061 ±0.008

)
0.022
0.56
(
#1 #8

0.194 ±0.008
MAX

4.92 ±0.20
0.202
5.13

0.016 ±0.004
0.41 ±0.10
#4 #5

0.050
1.27
6.00 ±0.30 1.80
0.236 ±0.012 MAX
0.071
0.006 -0.002

0.15 -0.05

MAX0.004
MAX0.10

3.95 ±0.20
+0.004

+0.10

0.156 ±0.008
8°

5.72
0~

0.225
0.50 ±0.20
0.020 ±0.008

10
 KA431/KA431A/KA431L

Ordering Information
Product Number Output Voltage Tolerance Package Operating Temperature
KA431LZ TO-92
0.5%
KA431LD 8-SOP
KA431AZ TO-92
1%
KA431AD 8-SOP -25 ~ +85°C
KA431 8-DIP
KA431Z 2% TO-92
KA431D 8-SOP

11
KA431/KA431A/KA431L

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support
which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be
or (b) support or sustain life, and (c) whose failure to reasonably expected to cause the failure of the life support
perform when properly used in accordance with device or system, or to affect its safety or effectiveness.
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.

www.fairchildsemi.com

8/20/02 0.0m 001

Stock#DSxxxxxxxx
 2002 Fairchild Semiconductor Corporation
This datasheet has been downloaded from:

www.DatasheetCatalog.com

Datasheets for electronic components.