Philips Semiconductors Product specification

Rectifier diodes BYQ30E, BYQ30EB, BYQ30ED series

ultrafast, rugged

FEATURES SYMBOL QUICK REFERENCE DATA

• Low forward volt drop VR = 150 V/ 200 V
• Fast switching
• Soft recovery characteristic a1 a2 VF ≤ 0.95 V
• Reverse surge capability 1 3
• High thermal cycling performance IO(AV) = 16 A
• Low thermal resistance
k 2 IRRM = 0.2 A
trr ≤ 25 ns

GENERAL DESCRIPTION
Dual, ultra-fast, epitaxial rectifier diodes intended for use as output rectifiers in high frequency switched mode power
supplies.
The BYQ30E series is supplied in the SOT78 conventional leaded package.
The BYQ30EB series is supplied in the SOT404 surface mounting package.
The BYQ30ED series is supplied in the SOT428 surface mounting package.

PINNING SOT78 (TO220AB) SOT404 SOT428

PIN DESCRIPTION tab tab
tab

1 anode 1
2 cathode 1

3 anode 2 2 2

1 3 1 3
tab cathode 1 23

LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134)
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
BYQ30E/ BYQ30EB/ BYQ30ED -150 -200
VRRM Peak repetitive reverse - 150 200 V
voltage
VRWM Working peak reverse - 150 200 V
voltage
VR Continuous reverse voltage - 150 200 V
IO(AV) Average rectified output square wave; δ = 0.5; Tmb ≤ 104 ˚C - 16 A
current (both diodes
conducting)
IFRM Repetitive peak forward square wave; δ = 0.5; Tmb ≤ 104 ˚C - 16 A
current per diode
IFSM Non-repetitive peak forward t = 10 ms - 80 A
current per diode t = 8.3 ms - 88 A
sinusoidal; with reapplied VRRM(max)
IRRM Peak repetitive reverse tp = 2 µs; δ = 0.001 - 0.2 A
surge current per diode
IRSM Peak non-repetitive reverse tp = 100 µs - 0.2 A
surge current per diode
Tj Operating junction - 150 ˚C
temperature
Tstg Storage temperature - 40 150 ˚C
1. It is not possible to make connection to pin 2 of the SOT428 or SOT404 packages.

October 1998 1 Rev 1.200

Philips Semiconductors Product specification

Rectifier diodes BYQ30E, BYQ30EB, BYQ30ED series

ultrafast, rugged

ESD LIMITING VALUE

SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VC Electrostatic discharge Human body model; - 8 kV
capacitor voltage C = 250 pF; R = 1.5 kΩ

THERMAL RESISTANCES
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
Rth j-mb Thermal resistance junction per diode - - 3 K/W
to mounting base both diodes - - 2.5 K/W
Rth j-a Thermal resistance junction SOT78 package, in free air - 60 - K/W
to ambient SOT404 and SOT428 packages, pcb - 50 - K/W
mounted, minimum footprint, FR4 board

ELECTRICAL CHARACTERISTICS
All characteristics are per diode at Tj = 25 ˚C unless otherwise specified
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
VF Forward voltage IF = 8 A; Tj = 150˚C - 0.84 0.95 V
IF = 16 A; Tj = 150˚C - 1 1.15 V
IF = 16 A - 1.12 1.25 V
IR Reverse current VR = VRWM - 4 30 µA
VR = VRWM; Tj = 100˚C - 0.3 0.6 mA
Qrr Reverse recovered charge IF = 2 A; VR ≥ 30 V; -dIF/dt = 20 A/µs - 4 11 nC
trr1 Reverse recovery time IF = 1 A; VR ≥ 30 V; -dIF/dt = 100 A/µs 20 25 ns
trr2 Reverse recovery time IF = 0.5 A to IR = 1 A; Irec = 0.25 A - 12 22 ns
Vfr Forward recovery voltage IF = 1 A; dIF/dt = 10 A/µs - 1 - V

October 1998 2 Rev 1.200

Philips Semiconductors Product specification

Rectifier diodes BYQ30E, BYQ30EB, BYQ30ED series

ultrafast, rugged

dI R
I F
F
dt

t
rr D.U.T.
time Voltage Pulse Source

Current
Q 10% 100% shunt
s
to ’scope
I
R I
rrm

Fig.1. Definition of trr1, Qs and Irrm Fig.4. Circuit schematic for trr2

I
F 0.5A

IF

0A

time
I rec = 0.25A
VF
IR

V
fr trr2
VF
I = 1A
time R
Fig.2. Definition of Vfr Fig.5. Definition of trr2

Forward dissipation, PF (W) BYQ30 Tmb(max) / C Forward dissipation, PF (W) BYQ30 Tmb(max) / C
12 114 12 114
Vo = 0.75 V D = 1.0 Vo = 0.75 V
Rs = 0.025 Ohms Rs 0.025 Ohms
10 120 10 120
0.5
a = 1.57
1.9
8 126 8 126
0.2 2.2
0.1 2.8
6 132 6 132
4
tp tp
4 I D= 138 4 138
T

2 144 2 144
t
T
0 150 0 150
0 2 4 6 8 10 12 0 1 2 3 4 5 6 7 8
Average forward current, IF(AV) (A) Average forward current, IF(AV) (A)
Fig.3. Maximum forward dissipation PF = f(IF(AV)) per Fig.6. Maximum forward dissipation PF = f(IF(AV)) per
diode; square current waveform where diode; sinusoidal current waveform where a = form
IF(AV) =IF(RMS) x √D. factor = IF(RMS) / IF(AV).

October 1998 3 Rev 1.200

Philips Semiconductors Product specification

Rectifier diodes BYQ30E, BYQ30EB, BYQ30ED series

ultrafast, rugged

trr / ns
1000 100 Qs / nC

IF=10A
5A
IF=10A 2A
100 1A

10
IF=1A

10

1 1.0
1 10 100 1.0 10 100
dIF/dt (A/us) -dIF/dt (A/us)
Fig.7. Maximum trr at Tj = 25 ˚C; per diode Fig.10. Maximum Qs at Tj = 25 ˚C; per diode

Irrm / A Transient thermal impedance, Zth j-mb (K/W)

10 10

IF=10A 1
1
IF=1A
0.1

0.1
0.01 PD tp tp
D=
T

T t
0.01 0.001
1 10 100 1us 10us 100us 1ms 10ms 100ms 1s 10s
-dIF/dt (A/us) pulse width, tp (s) BYQ30E

Fig.8. Maximum Irrm at Tj = 25 ˚C; per diode Fig.11. Transient thermal impedance; per diode;
Zth j-mb = f(tp).

Forward current, IF (A) BYQ30

20
Tj = 25 C
Tj = 150 C

15

10
max
typ

0
0 0.5 1 1.5 2
Forward voltage, VF (V)

Fig.9. Typical and maximum forward characteristic

IF = f(VF); parameter Tj

October 1998 4 Rev 1.200

Philips Semiconductors Product specification

Rectifier diodes BYQ30E, BYQ30EB, BYQ30ED series

ultrafast, rugged

MECHANICAL DATA

Dimensions in mm
4,5
Net Mass: 2 g max
10,3
max
1,3
3,7

2,8 5,9
min

15,8
max

3,0 max
3,0
not tinned
13,5
min
1,3
max 1 2 3
(2x) 0,9 max (3x)
0,6
2,54 2,54 2,4

Fig.12. SOT78 (TO220AB); pin 2 connected to mounting base.

Notes
1. Refer to mounting instructions for SOT78 (TO220) envelopes.
2. Epoxy meets UL94 V0 at 1/8".

October 1998 5 Rev 1.200

Philips Semiconductors Product specification

Rectifier diodes BYQ30E, BYQ30EB, BYQ30ED series

ultrafast, rugged

MECHANICAL DATA

Dimensions in mm 10.3 max 4.5 max

1.4 max
Net Mass: 1.4 g

11 max

15.4

2.5

0.85 max 0.5

(x2)
2.54 (x2)
Fig.13. SOT404 : centre pin connected to mounting base.

MOUNTING INSTRUCTIONS

Dimensions in mm 11.5

9.0

17.5

2.0

3.8

5.08

Fig.14. SOT404 : soldering pattern for surface mounting.

Notes
1. Epoxy meets UL94 V0 at 1/8".

October 1998 6 Rev 1.200

Philips Semiconductors Product specification

Rectifier diodes BYQ30E, BYQ30EB, BYQ30ED series

ultrafast, rugged

MECHANICAL DATA

Dimensions in mm seating plane

Net Mass: 1.1 g 1.1 2.38 max 5.4

6.73 max
tab 0.93 max

4 min
6.22 max
10.4 max
4.6

2 0.5
0.5 min

1 3 0.3
0.8 max 0.5
(x2)
2.285 (x2)
Fig.15. SOT428 : centre pin connected to tab.

MOUNTING INSTRUCTIONS

Dimensions in mm
7.0

7.0

2.15 1.5

2.5

4.57

Fig.16. SOT428 : minimum pad sizes for surface mounting.

Notes
1. Plastic meets UL94 V0 at 1/8".

October 1998 7 Rev 1.200

Philips Semiconductors Product specification

Rectifier diodes BYQ30E, BYQ30EB, BYQ30ED series

ultrafast, rugged

DEFINITIONS
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
 Philips Electronics N.V. 1998
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.

LIFE SUPPORT APPLICATIONS

These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.

October 1998 8 Rev 1.200