600V 2x30A

APT30DQ60BCT
APT30DQ60BCTG*
*G Denotes RoHS Compliant, Pb Free Terminal Finish.

ULTRAFAST SOFT RECOVERY RECTIFIER DIODE

(BCT) T O
-2 4
7
PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS
• Anti-Parallel Diode • Ultrafast Recovery Times • Low Losses
-Switchmode Power Supply
-Inverters • Soft Recovery Characteristics • Low Noise Switching
1
• Free Wheeling Diode 2
3
-Motor Controllers • Popular TO-247 Package • Cooler Operation
-Converters 1 3
-Inverters • Low Forward Voltage • Higher Reliability Systems
• Snubber Diode
• Low Leakage Current • Increased System Power
Density 2
• PFC
• Avalanche Energy Rated
1 - Anode 1
2 - Common Cathode
Back of Case - Cathode
3 - Anode 2

MAXIMUM RATINGS All Ratings Per Leg: TC = 25°C unless otherwise specified.

Symbol Characteristic / Test Conditions APT30DQ60BCT(G) UNIT

VR Maximum D.C. Reverse Voltage

VRRM Maximum Peak Repetitive Reverse Voltage 600 Volts

VRWM Maximum Working Peak Reverse Voltage

IF(AV) Maximum Average Forward Current (TC = 117°C, Duty Cycle = 0.5) 30
IF(RMS) RMS Forward Current (Square wave, 50% duty) 51 Amps

IFSM Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 320

EAVL Avalanche Energy (1A, 40mH) 20 mJ

TJ,TSTG Operating and StorageTemperature Range -55 to 175

°C
TL Lead Temperature for 10 Sec. 300

STATIC ELECTRICAL CHARACTERISTICS

Symbol Characteristic / Test Conditions MIN TYP MAX UNIT

IF = 30A 2.0 2.4

VF Forward Voltage IF = 60A 2.4 Volts

IF = 30A, TJ = 125°C 1.7

VR = 600V 25
IRM Maximum Reverse Leakage Current μA
VR = 600V, TJ = 125°C
053-4202 Rev D 6-2011

500
CT Junction Capacitance, VR = 200V 36 pF

Microsemi Website - http://www.microsemi.com

 DYNAMIC CHARACTERISTICS APT30DQ60BCT(G)

Symbol Characteristic Test Conditions MIN TYP MAX UNIT

trr Reverse Recovery Time IF = 1A, diF/dt = -100A/μs, VR = 30V, TJ = 25°C - 23
ns
trr Reverse Recovery Time - 30
Qrr IF = 30A, diF/dt = -200A/μs
Reverse Recovery Charge - 55 nC
VR = 400V, TC = 25°C
IRRM Maximum Reverse Recovery Current - 3 - Amps
trr Reverse Recovery Time - 175 ns
Qrr IF = 30A, diF/dt = -200A/μs
Reverse Recovery Charge - 485 nC
VR = 400V, TC = 125°C
IRRM Maximum Reverse Recovery Current - 6 - Amps
trr Reverse Recovery Time - 75 ns
IF = 30A, diF/dt = -1000A/μs
Qrr Reverse Recovery Charge - 855 nC
VR = 400V, TC = 125°C
IRRM Maximum Reverse Recovery Current - 22 Amps

THERMAL AND MECHANICAL CHARACTERISTICS

Symbol Characteristic / Test Conditions MIN TYP MAX UNIT

RθJC Junction-to-Case Thermal Resistance .80 °C/W

0.22 oz
WT Package Weight
5.9 g

10 lb•in
Torque Maximum Mounting Torque
1.1 N•m
Microsemi reserves the right to change, without notice, the specifications and information contained herein.

0.90

0.80
Z JC, THERMAL IMPEDANCE (°C/W)

D = 0.9
0.70

0.60 0.7
0.50
0.5 Note:
0.40
P DM

t1
0.30
0.3 t2
0.20
t
Duty Factor D = 1 /t2
0.1 SINGLE PULSE
θ

0.10 Peak T J = P DM x Z θJC + T C

0.05
0
10-5 10-4 10-3 10-2 10-1 1.0
RECTANGULAR PULSE DURATION (seconds)
FIGURE 1. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
053-4202 Rev D 6-2011
TYPICAL PERFORMANCE CURVES APT30DQ60BCT(G)
100 200
T = 125°C
60A J
V = 400V
180 R

trr, REVERSE RECOVERY TIME

IF, FORWARD CURRENT 80 160
30A
TJ = 175°C 140

60 120

(ns)
(A)

TJ = 125°C 100
15A
40 80

60
TJ = -55°C
20 40
TJ = 25°C 20
0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 0 200 400 600 800 1000 1200
VF, ANODE-TO-CATHODE VOLTAGE (V) -diF /dt, CURRENT RATE OF CHANGE(A/μs)
Figure 2. Forward Current vs. Forward Voltage Figure 3. Reverse Recovery Time vs. Current Rate of Change
1200 25

IRRM, REVERSE RECOVERY CURRENT

T = 125°C T = 125°C
J J
60A
Qrr, REVERSE RECOVERY CHARGE

V = 400V V = 400V
R R
1000
20
60A
800
30A 30A
15
(nC)

(A)
600
10
15A
400

15A
5
200

0 0
0 200 400 600 800 1000 1200 0 200 400 600 800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/μs) -diF /dt, CURRENT RATE OF CHANGE (A/μs)
Figure 4. Reverse Recovery Charge vs. Current Rate of Change Figure 5. Reverse Recovery Current vs. Current Rate of Change
1.2 60
Qrr Duty cycle = 0.5
T = 175°C
trr J

1.0 50
Kf, DYNAMIC PARAMETERS
(Normalized to 1000A/μs)

trr
0.8 40
IRRM
IF(AV) (A)

0.6 30

0.4 20

Qrr
0.2 10

0.0 0
0 25 50 75 100 125 150 75 100 25 125 50
150 175
TJ, JUNCTION TEMPERATURE (°C) Case Temperature (°C)
Figure 6. Dynamic Parameters vs. Junction Temperature Figure 7. Maximum Average Forward Current vs. CaseTemperature
200

180
CJ, JUNCTION CAPACITANCE

160

140

120
(pF)

100

80
053-4202 Rev D 6-2011

60

40

20
0
1 10 100 200
VR, REVERSE VOLTAGE (V)
Figure 8. Junction Capacitance vs. Reverse Voltage
 APT30DQ60BCT(G)
Vr

+18V diF /dt Adjus t APT30GT60BR

0V
D.U.T.
30μH trr/Q rr
Waveform

PEARSON 2878
CURRENT
TRANSFORMER

Figure 9. Diode Test Circuit

1 IF - Forward Conduction Current

1 4
2 diF/dt - Rate of Diode Current Change Through Zero Crossing.
Zer o
3 IRRM - Maximum Reverse Recovery Current
5 0.25 I RR M
4 trr - Reverse Recovery Time measured from zero crossing where 3

diode current goes from positive to negative, to the point at 2

which the straight line through IRRM and 0.25, IRRM passes through zero.

5 Qrr - Area Under the Curve Defined by IRRM and tRR.

Figure 10. Diode Reverse Recovery Waveform Definition

TO-247 Package Outline

e1 SAC: Tin, Silver, Copper

4.69 (.185 )
5.31 (.209 ) 15.49 (.610)
1.49 (.059 ) 16.26 (.640)
2.49 (.098 )
5.38 (.212 )
6.15 (.242) BSC 6.20 (.244 )

20.80 (.819 )
21.46 (.845 )
Common Cathode

3.55 (.138)
3.81 (.150)

4.50 (.177) Max. 2.87 (.113)

3.12 (.123)

0.40 (.016) 1.65 (.065 )

1.016 (.040) 19.81 (.780 ) 2.13 (.084 )
20.32 (.800 ) Anode 1
1.01 (.040 )
Common Cathode
053-4202 Rev D 6-2011

1.40 (.055 )
Anode 2

2.21 (.087)
2.59 (.102) 5.45 (.215) BSC
2-Plcs.
Dimensions in Millimeters and (Inches)