Q1: List The Features of The Ideal Drilling Bit.: 1. High Drilling Rate 2. Long Life
Q1: List The Features of The Ideal Drilling Bit.: 1. High Drilling Rate 2. Long Life
Q1: List The Features of The Ideal Drilling Bit.: 1. High Drilling Rate 2. Long Life
١٧ :الرقم
2. Long life
4. Moderate cost.
Q2: Explain the different failure mechanisms used by the drilling bits.
Ans. Shearing failure :
1 _ PDC cutters are used to shear the rock with Continuous scraping motion.
2 _ Shear failure will also occur when using Aggressive roller cone bits.
Compressive failure :
1 _ Roller cones are designed to crush the rock.
2 _ Compressive failure might occur when using a Dull PDC.
Q5: Given below is the IADC code for two different bits, Explain the characteristics of each
bit.
225G
737W
Ans. 225G :
2 = milled tooth bits.
2 = slightly soft formation.
5 = sealed roller bearing gage protected.
G = Gage / body protection.
737W :
7 = Tungsten Carbide Insert bits.
3 = medium formation.
7 = sealed friction bearing gage protected.
W =. Enhanced cutting structure.
Q7: The PDC bit used for drilling of the production hole with following specifications:
Cutter Density: 45, Cutter Size: 12 mm, it has short profile and the body material is
steel.
Ans.
332S
Classwork/HW#5 Drilling Bits
Include additional worksheets with calculations for partial credits in the
event your final answer if not correct.
Due Date for submission: In the end of your group lecture