Republic of the Philippines

BITOON NATIONAL VOCATIONAL HIGH SCHOOL

Bitoon, Dumanjug, Cebu

SUMMATIVE ASSESSMENT in TECHNICAL DRAWING - II

Name:________________________________________Grade & Section: _________ Date: ___________Score:_____

I. Directions: Read and analyze each question carefully. Encircle the letter of your answer on the testpaper.
1. What type of lettering is commonly used in engineering drawing?
A. Single-stroke Gothic Uppercase Letters and Numbers
B. Single-stroke Gothic Lowercase Letters and Numbers
C. Single-stroke Gothic Inclined Uppercase Letters and Numbers
D. Single-stroke Gothic Inclined Lowercase Letters and Numbers
2. Guideline is a must in lettering. What is the line weight to be used for the guidelines?
A. light lines B. medium lines C. heavy lines D. extra heavy lines
3. Which of the following refers to the lines that limit your drawing?
A. Guidelines B. Border lines C. Visible lines D. Object lines
4. What is the proper line weight of the border lines of the sheet layout?
A. light lines B. medium lines C. heavy lines D. extra heavy lines
5. When you construct your sheet layout, what is the thickness of the border lines?
A. 1 mm B. 10 mm C. 5 mm D. 25 mm
6. When is an auxiliary view needed in a drawing?
A. It is needed when you wanted to add some decorations
B. It is needed to present an accurate description of an inclined surface
C. It is needed when the object is not shown
D. It is not needed
7. It is an auxiliary view that is projected directly from the normal view.
A. primary B. secondary C. tertiary D. auxiliary
8. It is a view that is projected from the primary auxiliary view.
A. primary B. secondary C. tertiary D. auxiliary
9. When the auxiliary view is hinged form the top, the view is called ______.
A. Top view B. Top auxiliary view C. Top hinged view D. Top
10. The primary reference of the front auxiliary view is ________.
A. height B. depth C. width D. weight
11. The primary reference of the top auxiliary view is ______ of the object.
A. height B. depth C. width D. weight
12. What is the main purpose of auxiliary view?
A. to give additional information of the drawing
B. to make the drawing more appealing
C. to give the true shape and size of an inclined surface
D. all the above
13. It is a plane that is inclined to the three normal planes.
A. Auxiliary plane
B. Reference plane
C. Picture plane
D. Oblique plane
14. It is also known as the “helping view” because it adds more information to the drawing.
A. Auxiliary Drawing
B. Orthographic Projection
C. Isometric drawing
D. Oblique Drawing
15. It is a plane that is parallel to inclined surface of an object.
A. Auxiliary plane
B. Reference plane
C. Picture plane
D. Oblique plane
16. In this type of auxiliary view, a break line is used to indicate the imaginary break in the views.
A. Primary B. Secondary C. Revolved D. Partial
17. A partial auxiliary view usually shows only features on the ________ of the inclined line and not any projection of
other planes.
A. hidden lines B. Plane C. Center Line D. None of the above
18. This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of
projection:
A. Primary B. Secondary C. Revolved D. Successive
19. In this type of auxiliary view, a break line is used to indicate the imaginary break in the views:
A. Primary B. Secondary C. Revolved D. Partial
20. The principal reason for using an auxiliary view is ________.
A. to eliminate hidden lines
B. to create a true projection plane from an inclined plane in one of the primary views
C. to show cylinders as ellipses
D. to locate center marks
21. What word means “equal measure”?
A. Isometric B. Orthographic C. Trimetric D. Dimetric
22. What do you call the lines which are equidistant from one another and they never meet?
A. Intersecting Lines B. Parallel Lines C. Curve Lines D. Straight Lines
23. What do you mean by the word “perpendicular”?
A. It measures 300 from the reference plane
B. It measures 600 from the reference plane
C. It measures 900 from the reference plane
D. It measures 450 from the reference plane
24. The following are the safety reminders while drawing EXCEPT:
A. Be sure to keep your hands and instrument clean.
B. Sharpen your pencil over your drawing board while working.
C. Avoid eating sticky and wet food or object while drawing.
D. Always listen to the teacher on how a drawing should be done.
25. Why do students need to make a sketch/ draft before making a drawing into final?
A. To make the drawing accurate C. To erase the unwanted lines easily
B. To pass the drawing plate on time D. To analyze the proportion of the subject
II. Directions: Tell whether the following objects need an auxiliary view. Write (/) before the object that needs an
auxiliary drawing and (X) for the objects that does not need an auxiliary drawing.

____1. ____6.
____2. ____7.

____3. ____8.

____4. ____9.

____5. ____10.

III. Matching Type

Directions: Match the words from Column A to their definitions on Column B. Write your answer on a separate sheet
of paper.

COLUMN A COLUMN B

____1. Orthographic projection A. a view used to show the true size of

____2. Isometric drawing inclined and oblique surfaces
____3. Auxiliary view B. a two-dimensional drawing of a three-
____4. Partial Auxiliary view dimensional object, using two or more
____5. Complete Auxiliary view additional drawings to show additional
____6. Reference plane views of the object.
____7. Auxiliary C. additional
____8. Primary Auxiliary view D. a view projected on a plane that is
____9. Secondary Auxiliary view perpendicular to one of the principal
____10. Dihedral angle planes of projection and inclined to the
other views.
E. the angle between two planes
F. a view projected from the primary
auxiliary view.
G. Lines that serve as datum planes for
transferring distances from one
orthographic view to the auxiliary
Drafting
H. a type of 3D drawing that is set out
using 30-degree angles.
I. only the details for the inclined surface
are projected and drawn in the
 auxiliary view,
J. a type of view that allows you to see
the entire side of that drawing as
projected from that auxiliary plane.

IV. Directions: Arrange the steps in constructing an auxiliary view using numbers from 1-8.
Write your answers on a separate sheet of paper.

_____ Draw a reference line parallel to the edge view of the inclined surface and at a
convenient distance from it.
_____ Find the line that is considered the edge view of the inclined plane.
_____ Think of the auxiliary plane as being attached by hinges to the front (vertical) plane
from which it is developed.
_____ Project the labeled points and connect them in sequence to form the auxiliary view.
_____ Examine the views that are given for an inclined surface.
_____ Transfer the depth dimension, which in this case is the primary reference, to the
reference line as shown.
_____ In the front view, draw a light construction line at right angles to the inclined surface.
_____ From all points labeled on the front view, draw projection lines at right angles to the
inclined surface (parallel to the line of sight).

V. Essay
Write at least 5 sentences about the importance of Auxiliary view in Engineering drawing. (7 POINTS)