Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 229 views

    Assessment To API 579 Part 4: General Metal Loss. Point Thickness Readings

    Uploaded by

    Syafiqah Ismail

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Assessment To API 579 Part 4: General Metal Loss. Point Thickness Readings

    Uploaded by

    Syafiqah Ismail
    229 views2 pages

    Original Title

    Piping

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    229 views2 pages

    Assessment To API 579 Part 4: General Metal Loss. Point Thickness Readings

    Uploaded by

    Syafiqah Ismail

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Assessment to API 579 Part 4: General Metal Loss.

    Point Thickness Readings

    Project Information
    Site corrigo Assessment Name R-20210121-112337

    Created By DESKTOP-EFJE2IV\Corrigo Assessment Date 21/1/2021

    Equipment Information
    Equipment Name piping
    Equipment Type Piping
    Design Code ASME B31.3
    Manufactured by ERW
    Design Pressure 1.724 MPa
    Design temperature 150.000 °C
    Minimum Temperature °C
    Hydrotest Pressure MPa

    Component Information
    Component Name 45
    Material Specification Number A 106
    Material Grade B
    Component Type Cylindrical Section
    Nominal Outside Diameter 168.300 mm
    Nominal Thickness 10.970 mm
    Supplemental Thickness 0.000 mm
    Longitudinal Weld Joint Efficiency 1.000
    Circumferential Weld Joint Efficiency 1.000
    Mechanical Allowances - MA mm

    TWI Software, Granta Park, Great Abington Cambridge, CB21 6AL, UK ©2015 TWI Software
    ASMEB31_3.CylindricalSection.GeneralMetalLossThicknessReading
    Tel: +44(1223) 899000, Email:integriwise@twi.co.uk 1/2 (1.0.1.24840)
    Information for Assessment
    Internal Future Corrosion Allowance - FCAi 0.760 mm
    External Future Corrosion Allowance - FCAe 0.000 mm
    Internal Uniform Metal Allowance - LOSSi 0.000 mm
    External Uniform Metal Allowance - LOSSe 0.000 mm

    Intermediate Assessment Results


    Allowable Stress 137.895 MPa
    Minimum Required Wall Thickness (tmin) 1.047 mm
    Minimum Measured Thickness (tmm) 9.900 mm
    Average Measured Readings (tam) 10.573 mm
    COV(%) 2.217
    Limiting Thickness (tlim) 2.500 mm
    MAWPr based on (tam - FCA) 16.868 MPa

    Level 1 Assessment Criteria


    Average Measured Thickness True
    Minimum Measured Thickness True
    Maximum Allowable Working Pressure True

    Level 1 Assessment Conclusion


    The Level 1 Assessment is ACCEPTABLE

    Comments And Assumptions


    The API 579 metal loss procedures in Part 4 assume that:
    1. The original design criteria were in accordance with a recognised code or standard.
    2. The component is not operating in the creep range.
    3. The metal loss is relatively smooth (e.g. no local stress concentrations).
    4. The component is not in cyclic service.
    5. Level 1 covers Type A Component (Part 4, paragraph 4.2.5) subject to internal pressure. (i.e. supplemental loads are
    assumed negligible).
    6. Level 2 covers type A or B Components (see Part 4, paragraph 4.2.5) subject to internal pressure, external pressure,
    supplemental loads (see Annex A, paragraph A.2.7), or any combination of loading.

    API 579 recommends a minimum of 15 thickness readings should be used unless the level of NDE utilized can be used to
    confirm that the metal loss is general.

    Limitations

    Warnings
    The tensile properties belong to the latest edition of the design code. Please make sure the value conforms with the original
    design document.

    References
    API 579 'Fitness-for-Service', Second Edition, The American Society of Mechanical Engineers. Part 4: Assessment of General
    Metal Loss.

    TWI Software, Granta Park, Great Abington Cambridge, CB21 6AL, UK ©2015 TWI Software
    ASMEB31_3.CylindricalSection.GeneralMetalLossThicknessReading
    Tel: +44(1223) 899000, Email:integriwise@twi.co.uk 2/2 (1.0.1.24840)

    You might also like