XF-321S (HPMA) SDS Version 3.

0 Date: July 22,2019 Page 1 of 13

Uniphos Chemicals
No. 8, Tonghai 2nd Road
Rudong, Nantong 226407, China
Tel.: +86-513-6990 8111 Fax: +86-513-6990 8155

Safety Data Sheet

1. Identification
1.1 Product Identifier
Trade Name XF-321S(HPMA)
Chemical Name Homopolymer of Maleic Acid

1.2 Recommended use of the Chemical and Restrictions on use

Used as dispersant and scale inhibitor in cooling water treatment,
Recommended Use
Reverse Osmosis systems and many other scale control applications
Restrictions on use None known

1.3 Supplier’s Details

Company Name Nantong Uniphos Chemicals Co., Ltd.
Address No. 8, Tonghai 2nd Road
Rudong Coastal Economic Development Zone,
Nantong 226407, China
Telephone NO. +86-513-6990 8111

1.4 Emergency Telephone Number

Telephone NO. +86-519-83860599

2. Hazards Identification
2.1 Classifications of the substance
Corrosive to metals Category 1
Skin corrosion / Irritation Category 2
Serious eye damage / eye irritation Category 1
Skin sensitization Category 1

2.2 Label Elements

Symbol

Signal Word Danger!

Hazard Statement H290 May be corrosive to metals.
H315 Cause skin irritation!
H318 Cause serious eye damage!
H317 May cause an allergic skin reaction.

WWW.UNIPHOS.COM.CN
 XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 2 of 13

2.3 Precautionary Statement

Prevention
P234 Keep only in original container.
P261 Avoid breathing dusts/fume/gas/mists/vapours/spray.
P264 Wash hands and contaminated body thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the
workplace.
P280 Wear protective gloves/clothing, eye protection and face protection.

Response
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P321 Specific treatment (Refer to supplemental first aid instruction)
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P362 Take off contaminated clothing and wash before reuse.
P310 Immediately call a POISON CENTRE or doctor/physician if you feel
unwell
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P390 Absorb spillage to prevent material damage.

Storage
P406 Store in corrosive resistant container with a resistant inner liner.

Disposal
Dispose of contents / container in accordance with local / regional /
P501
national / international regulations.

3. Composition / Information on ingredients

Ingredients CAS NO. Concentration
(Chemical Name) Range
Homopolymer of maleic acid 26099-09-2 48.0 –52.0%
Fumaric Acid 110-17-8 ≤0.5%
Maleic Acid 110-16-7 ≤4.0%
Water 7732-18-5 remained
Total 100%

4. First-aid measures
4.1 Description of first-aid measures
General Take off immediately all contaminated clothing;
Advice Wash before re-use.
Eye Contact Get medical attention immediately. Call a poison center or physician.
Immediately flush with plenty of water, occasionally lifting the upper and
lower eyelids. Check for and remove any contact lenses. Continue to rinse for
at least 10 minutes. Chemical burns must be treated promptly by a physician.

WWW.UNIPHOS.COM.CN
 XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 3 of 13

Skin Get medical attention immediately. Call a poison center or physician. Wash
Contact with plenty of soap and water. Remove contaminated clothing and shoes.
Wash contaminated clothing thoroughly with water before removing it, or
Skin wear gloves. Continue to rinse for at least 10 minutes. Chemical burns must
Contact be treated promptly by a physician. In the event of any complaints or
symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes
thoroughly before reuse.
Inhalation Get medical attention immediately. Call a poison center or physician. Remove
victim to fresh air and keep at rest in a position comfortable for breathing. If it
is suspected that fumes are still present, the rescuer should wear an
appropriate mask or self-contained breathing apparatus. If not breathing, if
breathing is irregular or if respiratory arrest occurs, provide artificial
respiration or oxygen by trained personnel. It may be dangerous to the person
providing aid to give mouth-to-mouth resuscitation. If unconscious, place in
recovery position and get medical attention immediately. Maintain an open
airway. Loosen tight clothing such as a collar, tie, belt or waistband. In the
event of any complaints or symptoms, avoid further exposure.
Ingestion: Get medical attention immediately. Call a poison center or physician. Wash
out mouth with water. Remove dentures if any. Remove victim to fresh air and
keep at rest in a position comfortable for breathing. If material has been
swallowed and the exposed person is conscious, give small quantities of water
to drink. Stop if the exposed person feels sick as vomiting may be dangerous.
Do not induce vomiting unless directed to do so by medical personnel. If
vomiting occurs, the head should be kept low so that vomit does not enter the
lungs. Chemical burns must be treated promptly by a physician. Never give
anything by mouth to an unconscious person. If unconscious, place in
recovery position and get medical attention immediately. Maintain an open
airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Protection of No action shall be taken involving any personal risk or without suitable
First-aiders training. If it is suspected that fumes are still present, the rescuer should wear
an appropriate mask or self-contained breathing apparatus. It may be
dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Wash contaminated clothing thoroughly with water before removing it, or
wear gloves.

4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact: Causes serious eye damage.
Inhalation: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Skin contact: Causes skin irritation. May cause an allergic skin reaction.
Ingestion: May cause burns to mouth, throat and stomach.

Over-exposure signs/symptoms
Eye contact: Adverse symptoms may include the following:
pain
watering
redness

WWW.UNIPHOS.COM.CN
 XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 4 of 13

Inhalation: Adverse symptoms may include the following:

wheezing and breathing difficulties
asthma

Skin contact: Adverse symptoms may include the following:

pain or irritation
redness
blistering may occur
Ingestion: Adverse symptoms may include the following:
stomach pains

4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician:
Treat symptomatically. Contact poison treatment specialist immediately if large quantities
have been ingested or inhaled.
Specific treatments:
No specific treatment.

5. Fire-fighting Measures
5.1 Suitable Extinguishing Media
Water spray (fog), foam, dry chemical, or carbon dioxide

5.2 Unsuitable Extinguishing Media

None known

5.3 Specific hazards arising from the chemical

In a fire or if heated, a pressure increase will occur and the container may burst.
Decomposition products may include Carbon monoxide (CO), carbon dioxide

5.4 Special protective actions for fire-fighters

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is
a fire. No action shall be taken involving any personal risk or without suitable training.
Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode. Clothing for
fire-fighters (including helmets, protective boots and gloves) conforming to European
standard EN 469 will provide a basic level of protection for chemical incidents.

6. Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
For non-emergency No action shall be taken involving any personal risk or without
personnel: suitable training. Evacuate surrounding areas. Keep
unnecessary and unprotected personnel from entering. Do not
touch or walk through spilled material. Do not breathe vapor or
mist. Provide adequate ventilation. Wear appropriate respirator
when ventilation is inadequate. Put on appropriate personal
protective equipment.

WWW.UNIPHOS.COM.CN
 XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 5 of 13

For emergency If specialised clothing is required to deal with the spillage, take
responders: note of any information in Section 8 on suitable and unsuitable
materials. See also the information in "For non-emergency
personnel".

6.2 Environmental Avoid dispersal of spilled material and runoff and contact with
precautions soil, waterways, drains and sewers. Inform the relevant
authorities if the product has caused environmental pollution
(sewers, waterways, soil or air). May be harmful to the
environment if released in large quantities.

6.3 Methods and materials for containment and cleaning up

Small spill: Stop leak if without risk. Move containers from spill area.
Dilute with water and mop up if water-soluble. Alternatively,
or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of
via a licensed waste disposal contractor.
Large spill: Stop leak if without risk. Move containers from spill area.
Approach release from upwind. Prevent entry into sewers,
water courses, basements or confined areas. Wash spillages
into an effluent treatment plant or proceed as follows. Contain
and collect spillage with non-combustible, absorbent material
e.g. sand, earth, vermiculite or diatomaceous earth and place
in container for disposal according to local regulations. The
spilled material may be neutralized with sodium carbonate,
sodium bicarbonate or sodium hydroxide. Dispose of via a
licensed waste disposal contractor. Contaminated absorbent
material may pose the same hazard as the spilled product.

6.4 Reference to other See Section 1 for emergency contact information. See Section
sections 8 for information on appropriate personal protective
equipment. See Section 13 for additional waste treatment
information.

7. Handling and Storage

The information in this section contains generic advice and guidance. The list of Identified
Uses in Section 1 should be consulted for any available use-specific information provided in
the Exposure Scenario(s).

7.1 Precautions for safe handling

Protective measures: Put on appropriate personal protective equipment (see section 8).
Persons with a history of skin sensitization problems or asthma,
allergies or chronic or recurrent respiratory disease should not be
employed in any process in which this product is used. Do not get
in eyes or on skin or clothing. Do not breathe vapor or mist. Do
not ingest. Use only with adequate ventilation. Wear appropriate
respirator when ventilation is inadequate. Keep in the original
container or an approved alternative made from a compatible
WWW.UNIPHOS.COM.CN
 XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 6 of 13

material, kept tightly closed when not in use. Keep away from
alkalis. Empty containers retain product residue and can be
hazardous. Do not reuse container. Spillages should be cleaned up
promptly to avoid damage to surrounding materials.
Advice on general Eating, drinking and smoking should be prohibited in areas where
occupational hygiene: this material is handled, stored and processed. Workers should
wash hands and face before eating, drinking and smoking.
Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional
information on hygiene measures.

7.2 Conditions for safe Store in accordance with local regulations. Store in original
storage, including any container protected from direct sunlight in a dry, cool and
incompatibilities: well-ventilated area, away from incompatible materials (see
section 10) and food and drink. Store in corrosive resistant
container with a resistant inner liner. Store locked up.
Separate from alkalis. Keep container tightly closed and
sealed until ready for use. Containers that have been opened
must be carefully resealed and kept upright to prevent
leakage. Do not store in unlabeled containers. Use
appropriate containment to avoid environmental
contamination.

7.3 Specific end use(s) Not available.

Recommendations:

Industrial sector specific Not available.

solutions:

8. Exposure Controls / Personal Protection

8.1 Control parameters
Occupational exposure limits
No exposure limit value known.

Recommended If this product contains ingredients with exposure limits, personal,

monitoring workplace atmosphere or biological monitoring may be required to
procedures: determine the effectiveness of the ventilation or other control measures
and/or the necessity to use respiratory protective equipment. Reference
should be made to European Standard EN 689 for methods for the
assessment of exposure by inhalation to chemical agents and national
guidance documents for methods for the determination of hazardous
substances.

DNELs/DMELs
No DNELs/DMELs available.

WWW.UNIPHOS.COM.CN
 XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 7 of 13

PNECs
No PNECs available

8.2 Exposure controls

Appropriate Use only with adequate ventilation. If user operations generate dust,
engineering controls: fumes, gas, vapor or mist, use process enclosures, local exhaust
ventilation or other engineering controls to keep worker exposure to
airborne contaminants below any recommended or statutory limits.

Individual protection measures

Hygiene measures: Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the
end of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Contaminated work
clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations
and safety showers are close to the workstation location.
Eye/face protection: Safety eyewear complying with an approved standard should be
used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists, gases or dusts.
Skin protection
Hand protection: Chemical-resistant, impervious gloves complying with an approved
standard should be worn at all times when handling chemical
products if a risk assessment indicates this is necessary.
Body protection: Personal protective equipment for the body should be selected based
on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Other skin Appropriate footwear and any additional skin protection measures
protection: should be selected based on the task being performed and the risks
involved and should be approved by a specialist before handling this
product.

Respiratory Use a properly fitted, air-purifying or air-fed respirator complying

protection: with an approved standard if a risk assessment indicates this is
necessary. Respirator selection must be based on known or
anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.

Environmental Emissions from ventilation or work process equipment should be

exposure controls: checked to ensure they comply with the requirements of
environmental protection legislation. In some cases, fume scrubbers,
filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.

WWW.UNIPHOS.COM.CN
 XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 8 of 13

9. Physical and chemical properties

Appearance clear yellow to amber liquid
Odour Mild
Odour threshold Not available
pH (1% solution) @ 25℃ ≤2.0
Melting point/Freezing point -5℃
Initial Boiling point and boiling range 100-102℃
Flash Point Not available
Evaporation rate Not available
Flammability Not flammable
Flammability: Lower/Upper Not flammable
Explosive Limits: Lower/ Upper Not explosive
Vapour pressure Not available
Vapour density Not available
Relative density(water = 1) 1.16-1.22 (20℃)
Solubility Completely miscible
Partition coefficient: n-octanol / water Not available
Auto-ignition Temperature Not available
Decomposition temperature Not available
Viscosity 10 - 60 cps @ 25℃
Melting point/Freezing point -5℃
Initial Boiling point and boiling range 100-102℃
Flash Point Not available
Evaporation rate Not available
Flammability Not flammable
Flammability: Lower/Upper Not flammable
Explosive Limits: Lower/ Upper Not explosive
Vapour pressure Not available
Vapour density Not available
Relative density(water = 1) 1.16-1.22 (20℃)
Solubility Completely miscible
Partition coefficient: n-octanol / water Not available
Auto-ignition Temperature Not available
Decomposition temperature Not available
Viscosity 10 - 60 cps @ 25℃

10. Stability and Reactivity

10.1 Reactivity: No specific test data related to reactivity available for this
product or its ingredients.

10.2 Chemical stability: The product is stable.

10.3 Possibility of hazardous Under normal conditions of storage and use, hazardous
reactions: reactions will not occur.

WWW.UNIPHOS.COM.CN
 XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 9 of 13

10.4 Conditions to avoid: No specific data.

10.5 Incompatible materials: Reactive or incompatible with the following materials:
alkalis
metals
oxidizing materials
Inorganic sulfite salt.
Nitrite salt.

10.6 Hazardous Under normal conditions of storage and use, hazardous

decomposition products: decomposition products should not be produced.

11. Toxicological information

This product has not been tested for toxicity, but data obtained on similar products are
summarized below:

(A) Acute Toxicity

Test Results Basis
Oral Toxicity (Rats) Practically nontoxic LD 50, 15,000 mg/kg
Dermal Toxicity (Rats) Practically nontoxic LD 50, 1,560 mg/kg
Inhalation Toxicity, Vapor (Rats) Severely irritating Product Test Data.
Conclusion/Summary: Conclusive but not sufficient for classification.

Other Information
Items Results
Skin corrosion / Irritation Cause skin irritation!
Serious eye damage / Irritation Cause serious eye damage!
Respiratory or skin sensitization May cause an allergic skin reaction.
Germ cell mutagenicity No genetic effects were noted in standard bacterial tests.
Carcinogenicity Not available
Reproductive toxicity No adverse effects reported in repeat dose studies.
STOT-Single exposure Not available
STOT-repeated exposure Not available
Aspiration hazard Not available

12. Ecological Information

12.1 Toxicity
Product/ingredient Result Species Exposure
name
Maleic Acid
Acute EC50 316,2 mg/l Water flea 2d
Fresh water
XF-321S (HPMA)
Acute LC50 > 100 mg/l Rainbow 96 h
Fresh water trout, onaldson trout
Acute LC50 > 100 mg/l common carp 96 h
Fresh water
WWW.UNIPHOS.COM.CN
XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 10 of 13

Acute EC50 > 1.000 mg/l Water flea 48 h

Fresh water
Remarks – Acute – Aquatic invertebrates.:
Conclusive but not sufficient for classification.

12.2 Persistence and degradability

Product/ingredient name Test Result Dose
XF-321S (HPMA) 302B Inherent 18 % - Not readily mg/l
Biodegradability: biodegradable. -
Zahn-Wellens/EMPA Test 35 d
Remarks: No known significant effects or critical hazards.
Conclusion/Summary: Not readily biodegradable.

12.3 Bioaccumulative potential

Product/ingredient name LogPow BCF Potential
XF-321S (HPMA) 35 low

12.4 Mobility in soil

Soil/water partition coefficient (KOC) : Not available.
Mobility : Not applicable.

12.5 Results of PBT and vPvB assessment

PBT: P: No.
B: No.
T: No.
vPvB: vP: No.
vB: No.

12.6 Other adverse effects: No known significant effects or critical hazards.

13. Disposal considerations

The information in this section contains generic advice and guidance. The list of Identified
Uses in Section 1 should be consulted for any available use-specific information provided in
the Exposure Scenario(s).

13.1 Waste treatment methods

Product
Methods of The generation of waste should be avoided or minimized wherever
disposal: possible. Significant quantities of waste product residues should not
be disposed of via the foul sewer but processed in a suitable effluent
treatment plant. Dispose of surplus and non-recyclable products via a
licensed waste disposal contractor. Disposal of this product, solutions
and any by-products should at all times comply with the requirements
of environmental protection and waste disposal legislation and any
regional local authority requirements. Avoid dispersal of spilled
material and runoff and contact with soil, waterways, drains and
sewers.

WWW.UNIPHOS.COM.CN
XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 11 of 13

Hazardous Within the present knowledge of the supplier, this product is not
waste: regarded as hazardous waste, as defined by EU Directive
91/689/EEC.

European waste catalogue (EWC):

Waste code Waste designation
Not available.

Packaging:
Methods of disposal: The generation of waste should be avoided or minimized
wherever possible. Waste packaging should be recycled.
Incineration or landfill should only be considered when
recycling is not feasible.
Special precautions: This material and its container must be disposed of in a safe
way. Care should be taken when handling emptied containers
that have not been cleaned or rinsed out. Empty containers or
liners may retain some product residues. Avoid dispersal of
spilled material and runoff and contact with soil, waterways,
drains and sewers.

14. Transport Information

UN NO. 3265
UN Proper shipping name CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Homopolymer of Maleic Acid
Transport Hazard Class 8
Packing Group II
Environmental hazards No.
Transport label

Transport in bulk according to Annex II of MARPOL 73/78 and the IBC code.
No data available

15. Regulatory Information

15.1 Safety, health and environmental regulations/legislation specific for the substance
or mixture
EU Regulation (EC) No. 1907/2006 (REACH)
Annex XIV - List of substances subject to authorization
Annex XIV:
Substances of very high concern:
Annex XVII - Restrictions on the manufacture,
placing on the market and use of certain dangerous Not applicable.
substances, mixtures and articles:

WWW.UNIPHOS.COM.CN
XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 12 of 13

Other EU regulations
Europe inventory: All components are listed or exempted.
Integrated pollution prevention and Not listed
control list (IPPC) – Air:
Integrated pollution prevention and Not listed
control list (IPPC) – Water:

National regulations
International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Chemical Weapons Convention List Schedule I Chemicals
None of the components are listed.
Chemical Weapons Convention List Schedule II Chemicals
None of the components are listed.
Chemical Weapons Convention List Schedule III Chemicals
None of the components are listed.

Montreal Protocol (Annexes A, B, C, E)

None of the components are listed.

Stockholm Convention on Persistent Organic Pollutants

Annex A - Elimination - Production
None of the components are listed.
Annex A - Elimination - Use
None of the components are listed.
Annex B - Restriction - Production
None of the components are listed.
Annex B - Restriction - Use
None of the components are listed.
Annex C - Unintentional - Production
None of the components are listed.

Rotterdam Convention on Prior Inform Consent (PIC)

None of the components are listed.

UNECE Aarhus Protocol on POPs and Heavy Metals

Heavy metals - Annex 1
None of the components are listed.
POPs - Annex 1 - Production
None of the components are listed.
POPs - Annex 1 - Use
None of the components are listed.
POPs - Annex 2
None of the components are listed.
POPs - Annex 3
None of the components are listed.

WWW.UNIPHOS.COM.CN
XF-321S (HPMA) SDS Version 3.0 Date: July 22,2019 Page 13 of 13

International lists:
National inventory:
Australia: All components are listed or exempted.
Canada: All components are listed or exempted.
China: All components are listed or exempted.
Japan: Not determined.
Malaysia: Not determined.
New Zealand: All components are listed or exempted.
Philippines: All components are listed or exempted.
Republic of Korea: All components are listed or exempted.
Taiwan: All components are listed or exempted.
United States: All components are listed or exempted.

15.2 Chemical Safety Assessment:

This product contains substances for which Chemical Safety Assessments are still required.

16. Other Information

Abbreviations ATE = Acute Toxicity Estimate
and acronyms: CLP = Classification, Labelling and Packaging Regulation
[Regulation (EC) No. 1272/2008]
DMEL = Derived Minimal Effect Level
DNEL = Derived No Effect Level
EUH statement = CLP-specific Hazard statement
PBT = Persistent, Bioaccumulative and Toxic
PNEC = Predicted No Effect Concentration
RRN = REACH Registration Number
vPvB = Very Persistent and Very Bioaccumulative
Prepared by No. 8, Tonghai 2nd Road
Rudong Coastal Economic Development Zone,
Nantong 226407, China
Tel.: +86-513-69908111 Fax: +86-513-69908155
Date July 22,2019
Declaration Although the information and recommendations set forth herein
(hereinafter “Information”) are presented in good faith and believed to be
correct as of the date hereof, Nantong Uniphos Chemicals Co., Ltd.
makes no representations as to the completeness or accuracy thereof.
Information is supplied upon the condition that the persons receiving same
will make their own determination as to its suitability for their purposes
prior to use. In no event will Nantong Uniphos Chemicals Co., Ltd.
be responsible for damages of any nature whatsoever resulting from the
use of or reliance upon Information. No representations or warranties,
either express or implied, of merchantability, fitness for a particular
purpose or of any other nature are made hereunder with respect to
information or the product to which information refers.

WWW.UNIPHOS.COM.CN