Annapurna Health Care Pvt.Ltd.

Banepa,Kavre,Nepal
Measurement Sheet
Block No 3
Name of work: Annapurna Health Care Pvt.Ltd.
Location: Banepa,Kavre,Nepal
Name of Contractror:Kunuwar & Sons Builder Pvt.Ltd
Item:Brick masonry work
Measurement
S.No Description of Works Unit Nos L B H A Quantity Remarks
m m m m2
1 brick masonary
Providing and laying first class chimney fired
brick one or more brick thick wall in cement
mortar 1:4 (1 cement : 4 coarse sand) in
foundation up to plinth, superstructure and
other specified places in all heights and level
including the cost of single or multi stage
scaffolding, soaking bricks, curing, raking
1.1 joints, provision for recesses, openings, cum
toothing etc., all complete as per drawing,
specifications and instructions of the
Engineer.

Ground Floor
Grid 5-5
1.00 16.400 3.60 59.04
deduction for ounter window 4.00 3.100 2.10 -26.04

Grid E-E and Grid A-A

2.00 8.150 3.60 58.68
dedcution for window W1 2.00 2.450 1.40 -6.86
deduction for window W2 2.00 1.000 1.40 -2.80
deduction for door (MD) 2.00 1.220 2.10 -5.12

First Floor

Grid A-A
1.00 12.150 2.90 35.24
deduction for window W1 2.00 2.450 1.55 -7.60
deduction for window W2 1.00 1.000 1.55 -1.55
deduction for door (MD) 1.00 1.220 2.10 -2.56

Grid 4-4
1.00 16.40 2.90 47.56
deduction for window opening 4.00 2.750 2.15 -23.65

Grid F-F
1.00 7.750 2.90 22.48
deduction for window W1 1.00 2.450 1.55 -3.80
deduction for window W2 1.00 1.000 1.55 -1.55
deduction for door (MD) 1.00 1.220 2.10 -2.56

Grid 3-3
1.00 7.750 2.90 22.48
deduction for window W1 1.00 2.450 1.55 -3.80

PREPARED BY: CHECKED BY: APPROVED BY:

 Annapurna Health Care Pvt.Ltd.
Banepa,Kavre,Nepal
Measurement Sheet
Block No 3
Name of work: Annapurna Health Care Pvt.Ltd.
Location: Banepa,Kavre,Nepal
Name of Contractror:Kunuwar & Sons Builder Pvt.Ltd
Item:Brick masonry work
Measurement
S.No Description of Works Unit Nos L B H A Quantity Remarks
m m m m2
Third Floor
Grid 4-4
1.00 29.400 2.90 85.26
Deduction For window W2 5.00 1.000 1.55 -7.75
Deduction For window SW2 5.00 1.900 2.10 -19.95

Grid A-A
1.00 8.650 2.90 25.09
Deduction for window W1 1.00 2.450 1.55 -3.80
Deduction for window W2 2.00 0.900 1.55 -2.79

Grid 2-2
1.00 20.550 1.10 22.61
Dection for pillar cladding 6.00 0.600 1.10 -3.96

Grid F-F
1.00 9.000 2.90 26.10
deduction for Window W1 1.00 2.450 1.55 -3.80
deduction for Window W2 2.00 0.900 1.55 -2.79

Column Brick Cladding

6.00 2.400 2.90 41.76

Total 313.55 313.55

PREPARED BY: CHECKED BY: APPROVED BY:

 Annapurna Health Care Pvt. Ltd
Banepa, Kavre, Nepal
Bill of Quantity
Project Name:Annapurna Health Care (Block 1)
Location:Magar gaun,Banepa,Kavre
Rate (with
S.N Description units Quantity
in figure
1 Earthwork in excavation
Excavation of foundation in all type of soils for
foundation,trenches,footing,pits etc to the required
depth including dewatering by manual or mechanical
means etc .as per specifications with all contractors
own machinery and equipments providing crossing of
track,shoring,strutting,timbering and buttressing with
appropriate materials and all such measures necessary
to retain in position the sides of foundation pit and
including refilling the excavated material with watering
,ramming.levelling the site and disposing off the
surplus/unusable earth to outside the constrution
premises etc all complete as per drawings,specification
and instruction of the engineers.

Cu.m 1741.95
2 Earth work in fillings
Back filling in foundation,floors and sides of foundation
with approved soil obtained frome the excavation at
site and stacked at site in layer not exceeding 15cm
thick (compacted thickness)including transportation of
soil ,spreading in required line and level ,sparkling
water,ramming,compacting with mechanical
rammers,testing etc.all complete as per
drawing,specification and instruction of engineer

Cu.m 263.73
3 Flat brick soling
Supplying and laying dry flat brick,below the
foundations ,tie beam ,in all rooms of ground floor with
sand binding,ramming,compacting,levelling all
complete in perfect line and level as per
drawing,specification and instruction of consultant.
Sq.m 250.34
4 Concreting work
4.1 Plain Cement concreting(1:3:6)
 Providing and laying machine mixed plain cement
concrete of nominal mix 1:3:6(cement:sand:aggregate)
for levelling course in foundation and floor of
building,pathway,etc in all level with broken stone
aggregate not more than 25mm if approved quality
including formwork wherever necessary
dewatering,batc;hing,mixing,transporting,placing,comp
acting,curing,including all lead and lift etc all complete
as per drawings ,specification,and instruction of the
engineer.

Cu.m 16.34
4.2 Plain Cement concreting(1:2:4)
Providing and laying machine mixed plain cement
concrete of nominal mix 1:2:4(cement:sand:aggregate)
for levelling course in floor of building,pathway,etc in
all level with broken stone aggregate not more than
25mm if approved quality including formwork
wherever necessary
dewatering,batc;hing,mixing,transporting,placing,comp
acting,curing,including all lead and lift etc all complete
as per drawings ,specification,and instruction of the
engineer.

Cu.m 9.87
4.3 P.C.C work for R.C.C work(1:1.5:3)
Providing and laying in position machine mixed and
machine vibrated designed mixed cement concrete of
specified grade for reinforced cement concrete work
using OPC 43 grade cement with various design mixes
(various grade of concrete)with 20mm graded machine
crused stone aggregate of approved quality in various
locations and heights including transportation of
concrete to site of placing ,compaction,finish to
required line and level ,protection and curing etc all
complete as per drawing,specification and the
instruction of the engineer,but excluding the cost of
centering ,shuttering, and reinforcement,but including
the cost of admixtures in recommended propotion as
per to accelerate ,retard setting of the concrete
improve workability ,improve strength without
imparing strength and durability as deriction of the
engineer for the following grade of structural concrete.

Cu.m 225.06
5 Reinforcement
 Providing and fixing in position Fe500 steel
reinforcement of various diameter conforming to
relevant is code in RCC works including
straightening,cutting,binding,bending with 20swg
annealed wire for tying the reinforcement bar at each
junction(binding wire shall not be measured
seperately)including all waste and cut pieces,provision
for adquete number of spacers,chairs,providing and
placing cement mortar (1:1) cover blocks to keep the
bars in the intended position at all levels all complete
as per drawing specifications and instruction of the
engineer.(authorised lap length and for the bar length
exceeding 10m in length shall be measured for the
payment)

Mt 38.01
6 Formwork
Suplying and laying centering ,shuttering of various
pattern formworks with 19 mm thick waterproof
plywood and steel adjustable props for alll kind of RCC
works for foundation ,column,shear
walls,beams,slabs,staircase ,lintel,sill including
nails,proping scafoldings,stagging,supporting and
bracing in proper line and level,sealing the joints with
heavy duty brown self adhesive tape,aligning to line
and levels and removing completely as per drawing and
instruction of consultant

Sq.m 1590.61
7 Brick masonry work
Providing and laying first class chimney fired brick one
or more brick thick wall in cement mortar 1:4 (1
cement : 6 coarse sand) in foundation up to plinth,
superstructure and other specified places in all heights
and level including the cost of single or multi stage
scaffolding, soaking bricks, curing, raking joints,
provision for recesses, openings, toothing etc., all
complete as per drawing, specifications and
instructions of the
Engineer.

Cu.m 144.47
7 Door and Window work
Supplying and installation of UPVC Profile Sliding
window with galvanized steel reinforcement of 1.5 mm,
5 mm thick clear glass, insect net, patented standard
hardware like: rollers, gaskets,brush seal, moon locks
drainage cover etc. as per specification of Korean
Standard.
7.1
UPVC sliding Door with net (frame 52 X 88mm sash88
7.1.1 X 42mm white colour with 5mm Glass) Sq.m 0.00
 UPVC sliding window with net (frame 50 X 80mm sash
7.1.0 58 X 36mm white colour with 5mm Glass) Sq.m 97.60
7.2 wooden door
Supplying, making, fitting wooden frames for doors
( Frame size 100 mm x 75 mm) with good finish of
approved seasoned salwood including fixing with MS
holdfasts (3 nos. at each side), all complete as per
design,
drawing, specifications instructions of the Consultant.
7.2.1 Cu.m 1.08
Supplying, making, fitting panel door shutters (38mm)
with approved quality seasoned sal wood sides, single
or double leaf with, excluding frame works, including
hinges (3 nos. - 100 mm long per leaf) brass tower bolts
(150mm and 300mm), mortise lock (Godrej) and
screws, nails, cleaning all complete as per design,
drawing, specifications instructions of
the Consultant.

7.2.2 Sq.m 3.34

Supplying, making, fitting readymade teak wood
doors(seasoned and poisned treated) single excluding
frame works, including hinges (3 nos. - 100 mm long
per leaf) brass tower bolts (150mm and 300mm),
mortise lock (Godrej) and screws, nails, cleaning all
complete as per design, drawing, specifications
instructions of
the Consultant.

7.2.3 Sq.m 24.17

Supplying and applying three coat chapra painting in
teakwood door in required line and level as per
instruction of consultant
7.2.4 Sq.m 24.17
8 Plastering and wall finishing work
Plastering work
8.1 Inner walls(1:6)
Providing and applying at all levels and shape 20
mm thick cement plaster in building inside in specified
cement mortar in two layers as 6 to
8 mm thick final coat with 1:6 (1 cement :6 fine sand)
cement mortar over the 12 to 14 mm thick 1:6 (1
cement : 6 coarse sand) under coat in all surface at all
height including mixing mortar, laying in perfect line,
level and plumb and finishining in regular and even
surface including all necessary single or multi-stage
scaffolding, providing and fixing , making grooves and
recesses, throating, dusting, dripping, wetting, curing,
protection, etc., all complete as per drawing ,
specification and instruction

Sq.m 1113.94
8.2 On Ceiling(1:4)
 12.5.mm, thick cement and sand plaster work of mix
1:4 (1 cement & 4 sand) in concrete surface, ceiling
surface at all height including mixing mortar, laying in
perfect line, level and plumb and finishing in regular
and even surface including all necessary single or multi-
stage scaffolding, providing and fixing 200 mm wide 24
gauge GI Chicken wire mesh at junction of R.C.C. and
masonry, making grooves and recesses, throating,
dusting, dripping, wetting, curing, protection, etc.
all complete as per drawing , specification and
instruction. [Rate shall also include for providing
drips band, moulds, groove, chicken wire mesh at
junction of RCC and masonry, etc., to complete the
works at any heights].

Sq.m 619.78
8.3 Flushing point work
Providing and applying flush pointing on the brick
surface in lime & surkhi mortar in ratio of 1:2 in
required line and level all complete as per instruction of
consultant .
Sq.m 563.41
8.4 Distemper painting work
Supplying and laying approved quality, brand and
color of destemper painting in two coats in uniform
color including base coat of primer all complete as per
design, drawings, specifications and instructions of the
Consultant.

Sq.m 1733.72
8.5 wall care putty
Providing and applying wall care putty on inner wall
and ceiling surface as per design, drawings,
specifications, and instructions of the consultant.
Sq.m 1733.72
8.6 Enamel painting work
Supplying and application of enamel paint of
approved quality on windows & Wire Mesh Doors &
Windows in two coats over one coat of primer in
properly sanded surface all complete as per design,
drawings,
specifications and instructions of the Consultant.
Sq.m 40.21
9 Stainless steel railings
9.1 Staircase Railings
 Providing, fabricating and fixing in position pre-
fabricated stainless steel staircase railing as per
drawing with 3 rows of 25mm diameter Stainless Steel
(SS) pipe, 60mm diameter SS handrail of 304 grade, 16
SWG thick to be supported at a distance of maximum
of 1.5 meters with a SS (304 grade) Balustrade to be
fixed to the concrete member with anchor fasteners
and the flats with holes of 10 mm dia with all
labour and materials and consumables, grinding,
milling, polishing etc. all complete
as per drawings, specifications and instructions of the
Engineer.

Rm 23.28
11 Flooring works
11.2 Parquet flooring
Supplying, laying 10 mm thick Jangali sisam wood
parquet flooring on living, family room & passage with
approved quality, size and in pattern with necessary
jointing material, grinding, polishing all complete as per
design, drawing, specifications and instruction of the
Consultant.
Sq.m 302.67
11.3 Marble works
11.3.1Prefinished marble work on stair and corridor
Providing and fixing in position 19mm thick gang saw
cut mirror polished (premoulded and prepolished)
machine cut marble for stairs, similar locations of
required size of approved shade, colour and texture
laid over
20 mm thick base cement mortar 1:4 (1 cement : 4
coarse sand) with joints treated with white cement
mixed with matching pigment, epoxy touch ups,
including rubbing curing, molding, 4 numbers of flame
cut groove at each tread, polishing to edge to give high
gloss finish at all level, etc., all complete as per drawing,
specification and instruction of the Engineer. [Rate
shall include for preparation of base surface &
finished the surface, protection with gypsum/pop layer
over plastic sheet and removing the same before
handing over, work at all levels, as directed by the
Engineer]. ( Marble Base Price NRs. 140.00 per Sft.)

Sq.m 80.93
11.3.2MARBLE SKIRTING
- do - as above, but for skirting with rounding top edge.
Sq.m 9.88
11.3.3Marble extra for nosing
Extra over for nosing in Marble for stair/steps treads
over Item No. 5.8.1 R.m 129.57
11.4 Virtified ceramic tile flooring
Providing and fixing 1st quality vitrified ceramic tiles in
required line, level conforming to the standard
mentioned in specification of minimum thickness 8mm
of approved make (Somany tiles or equivalent) in any
colours , shades of any size as approved by Engineer in
floor over cement screed with cement paste and
joint filed with waterproof non-shrink polymer joint
mortar in required colour, including surface
preparation, scaffolding, protection, etc. all complete as
per drawings, specifications and instructions. Tile cost
shall include the cost of base screed/mortar.
(Tile base price = NPR 140 per sq.ft.).

Sq.m 56.20
11.5 Porcelein glazed wall tile
Providing and laying porcelein glazed wall tile in
approved colours , shades of any size as approved by
Engineer in toilet walls over cement mortar 1:4 (1
cement : 4 sand) and joint filed with waterproof non-
shrink polymer joint mortar in required colour,
including surface preparation, scaffolding, protection,
cleaning, etc. all complete as pr drawings, specifications
and instructions of the Engineer.

Sq.m 205.05
11.6 Flag Stones paving
Providing, laying flag stones with smooth surface(25 -
37.5mm thk.) on
terrace, balcony etc with 1:4 c/s mortar including
necessary curing, in line, level all complete as per
design, drawing, specifications and instructions of the
consultant.
Sq.m 154.34
11.7 Roofing
Supplying and laying machine made clay tile roofing in
required line and level as directed by consultant Sq.m 87.53
Total
VAT13%
Grand Total
 Care Pvt. Ltd.
Nepal
ntity

Rate (without VAT)

Remarks
in word
 Annapurna Health Care Pvt. Ltd
Banepa, Kavre, Nepal
Bill Of Quantity
Project Name:Annapurna Health Care (Block 3)
Location:Magar gaun,Banepa,Kavre
Description Rate(withou
S.N units Quantity in figure
1 Earthwork in excavation
Excavation of foundation in all type of soils for
foundation,trenches,footing,pits etc to the required depth
including dewatering by manual or mechanical means etc .as
per specifications with all contractors own machinery and
equipments providing crossing of
track,shoring,strutting,timbering and buttressing with
appropriate materials and all such measures necessary to
retain in position the sides of foundation pit and including
refilling the excavated material with watering
,ramming.levelling the site and disposing off the
surplus/unusable earth to outside the constrution premises
etc all complete as per drawings,specification and instruction
of the engineers.

Cu.m 1866.37
2 Earth work in fillings
Back filling in foundation,floors and sides of foundation with
approved soil obtained frome the excavation at site and
stacked at site in layer not exceeding 15cm thick (compacted
thickness)including transportation of soil ,spreading in
required line and level ,sparkling water,ramming,compacting
with mechanical rammers,testing etc.all complete as per
drawing,specification and instruction of engineer

Cu.m 250.87
3 Flat brick soling
Supplying and laying dry flat brick,below the foundations ,tie
beam ,in all rooms of ground floor with sand
binding,ramming,compacting,levelling all complete in perfect
line and level as per drawing,specification and instruction of
consultant.
Sq.m 449.30
4 Concreting work
4.1 Plain Cement concreting(1:3:6)
 Providing and laying machine mixed plain cement concrete of
nominal mix 1:3:6(cement:sand:aggregate) for levelling
course in foundation and floor of building,pathway,etc in all
level with broken stone aggregate not more than 25mm if
approved quality including formwork wherever necessary
dewatering,batc;hing,mixing,transporting,placing,compacting
,curing,including all lead and lift etc all complete as per
drawings ,specification,and instruction of the engineer.

Cu.m 10.23
4.2 Plain Cement concreting(1:2:4)
Providing and laying machine mixed plain cement concrete of
nominal mix 1:2:4(cement:sand:aggregate) for levelling
course in floor of building,pathway,etc in all level with broken
stone aggregate not more than 25mm if approved quality
including formwork wherever necessary
dewatering,batc;hing,mixing,transporting,placing,compacting
,curing,including all lead and lift etc all complete as per
drawings ,specification,and instruction of the engineer.

Cu.m 21.79
4.3 P.C.C work for R.C.C work(1:1.5:3)
Providing and laying in position machine mixed and machine
vibrated designed mixed cement concrete of specified grade
for reinforced cement concrete work using OPC 43 grade
cement with various design mixes (various grade of
concrete)with 20mm graded machine crused stone aggregate
of approved quality in various locations and heights including
transportation of concrete to site of placing
,compaction,finish to required line and level ,protection and
curing etc all complete as per drawing,specification and the
instruction of the engineer,but excluding the cost of
centering ,shuttering, and reinforcement,but including the
cost of admixtures in recommended propotion as per to
accelerate ,retard setting of the concrete improve workability
,improve strength without imparing strength and durability
as deriction of the engineer for the following grade of
structural concrete.

Cu.m 215.50
5 Reinforcement
 Providing and fixing in position Fe500 steel reinforcement of
various diameter conforming to relevant is code in RCC works
including straightening,cutting,binding,bending with 20swg
annealed wire for tying the reinforcement bar at each
junction(binding wire shall not be measured
seperately)including all waste and cut pieces,provision for
adquete number of spacers,chairs,providing and placing
cement mortar (1:1) cover blocks to keep the bars in the
intended position at all levels all complete as per drawing
specifications and instruction of the engineer.(authorised lap
length and for the bar length exceeding 10m in length shall
be measured for the payment)

Mt
6 Formwork
Suplying and laying centering ,shuttering of various pattern
formworks with 19 mm thick waterproof plywood and steel
adjustable props for alll kind of RCC works for foundation
,column,shear walls,beams,slabs,staircase ,lintel,sill including
nails,proping scafoldings,stagging,supporting and bracing in
proper line and level,sealing the joints with heavy duty
brown self adhesive tape,aligning to line and levels and
removing completely as per drawing and instruction of
consultant

Sq.ft 1626.82
7 Brick masonry work
Providing and laying first class chimney fired brick one or
more brick thick wall in cement mortar 1:4 (1 cement : 6
coarse sand) in foundation up to plinth, superstructure and
other specified places in all heights and level including the
cost of single or multi stage scaffolding, soaking bricks,
curing, raking joints, provision for recesses, openings,
toothing etc., all complete as per drawing, specifications and
instructions of the
Engineer.

Cu.m 105.50
7 Door and Window work
7.1 Supplying and installation of UPVC Profile Sliding window
with galvanized steel reinforcement of 1.5 mm, 5 mm thick
clear glass, insect net, patented standard hardware like:
rollers, gaskets,brush seal, moon locks drainage cover etc. as
per specification of Korean Standard.

7.1.1 UPVC sliding Door with net (frame 52 X 88mm sash88 X

42mm white colour with 5mm Glass) Sq.m 78.08
7.1.2 UPVC sliding window with net (frame 50 X 80mm sash 58 X
36mm white colour with 5mm Glass) Sq.m 7.27
7.2 wooden door
7.2.1 Supplying, making, fitting wooden frames for doors ( Frame
size 100 mm x 75 mm) with good finish of approved
seasoned salwood including fixing with MS holdfasts (3 nos.
at each side), all complete as per design,
drawing, specifications instructions of the Consultant.
Cu.m 0.90
7.2.2 Supplying, making, fitting panel door shutters (38mm) with
approved quality seasoned sal wood sides, single or double
leaf with, excluding frame works, including hinges (3 nos. -
100 mm long per leaf) brass tower bolts (150mm and
300mm), mortise lock (Godrej) and screws, nails, cleaning all
complete as per design, drawing, specifications instructions
of
the Consultant.

Sq.m 9.97
7.2.3 Supplying, making, fitting readymade teak wood
doors(seasoned and poisned treated) single excluding
frame works, including hinges (3 nos. - 100 mm long per leaf)
brass tower bolts (150mm and 300mm), mortise lock
(Godrej) and screws, nails, cleaning all complete as per
design, drawing, specifications instructions of
the Consultant.
Sq.m 25.98
7.2.4 Supplying and applying three coat chapra painting in
teakwood door in required line and level as per instruction of
consultant
Sq.m 25.98
8 Plastering and wall finishing work
Plastering work
8.1 Inner walls(1:6)
Providing and applying at all levels and shape 20 mm
thick cement plaster in building inside in specified cement
mortar in two layers as 6 to
8 mm thick final coat with 1:6 (1 cement :6 fine sand) cement
mortar over the 12 to 14 mm thick 1:6 (1 cement : 6 coarse
sand) under coat in all surface at all height including mixing
mortar, laying in perfect line, level and plumb and finishining
in regular and even surface including all necessary single or
multi-stage scaffolding, providing and fixing , making grooves
and recesses, throating, dusting, dripping, wetting, curing,
protection, etc., all complete as per drawing , specification
and instruction

Sq.m 1104.57
8.2 On Ceiling(1:4)
 12.5.mm, thick cement and sand plaster work of mix 1:4 (1
cement & 4 sand) in concrete surface, ceiling surface at all
height including mixing mortar, laying in perfect line, level
and plumb and finishing in regular and even surface including
all necessary single or multi-stage scaffolding, providing and
fixing 200 mm wide 24 gauge GI Chicken wire mesh at
junction of R.C.C. and masonry, making grooves and recesses,
throating, dusting, dripping, wetting, curing, protection,
etc. all complete as per drawing , specification and
instruction. [Rate shall also include for providing drips
band, moulds, groove, chicken wire mesh at junction of RCC
and masonry, etc., to complete the works at any heights].

Sq.m 589.15
8.3 Flushing point work
Providing and applying flush pointing on the brick surface in
lime & surkhi mortar in ratio of 1:2 in required line and level
all complete as per instruction of consultant for 100m2

Sq.m 285.54
8.4 Distemper painting work
Supplying and laying approved quality, brand and color
of destemper painting in two coats in uniform color including
base coat of primer all complete as per design, drawings,
specifications and instructions of the
Consultant.
Sq.m 1693.72
8.5 wall care putty
Providing and applying wall care putty on inner wall and
ceiling surface as per design, drawings, specifications, and
instructions of the consultant.
Sq.m 1693.72
8.6 Enamel painting work
Supplying and application of enamel paint of approved
quality on windows & Wire Mesh Doors & Windows in two
coats over one coat of primer in properly sanded surface all
complete as per design, drawings,
specifications and instructions of the Consultant.
Sq.m 29.63
9 Flooring works
9.1 50 mm thick Plain cement concrete M 15 (1:2:4) in floor
finishing work with cement, sand &10 to 38mm stone ballast
Proper mixing , laying & compaction , curing the Job all
complete work
Sq.m 365.81
9.2 Parquet flooring
Supplying, laying 10 mm thick Jangali sisam wood parquet
flooring on living, family room & passage with approved
quality, size and in pattern with necessary jointing material,
grinding, polishing all complete as per design, drawing,
specifications and instruction of the Consultant.
Sq.m 365.81
9.3 Marble works
9.3.1 Prefinished marble work on stair and corridor
 Providing and fixing in position 19mm thick gang saw cut
mirror polished (premoulded and prepolished) machine cut
marble for stairs, similar locations of required size of
approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 (1 cement : 4 coarse
sand) with joints treated with white cement mixed with
matching pigment, epoxy touch ups, including rubbing
curing, molding, 4 numbers of flame cut groove at each
tread, polishing to edge to give high gloss finish at all level,
etc., all complete as per drawing, specification and
instruction of the Engineer. [Rate shall include for
preparation of base surface & finished the surface,
protection with gypsum/pop layer over plastic sheet and
removing the same before handing over, work at all levels, as
directed by the Engineer]. ( Marble Base Price NRs. 140.00
per Sft.)

Sq.m 65.10
9.3.2 Marble Skirting
- do - as above, but for skirting with rounding top edge. Sq.m 8.02
9.4 Virtified ceramic tile flooring
Providing and fixing 1st quality vitrified ceramic tiles in
required line, level conforming to the standard mentioned in
specification of minimum thickness 8mm of approved make
(Somany tiles or equivalent) in any colours , shades of any
size as approved by Engineer in floor over cement screed
with cement paste and joint filed with waterproof non-
shrink polymer joint mortar in required colour, including
surface preparation, scaffolding, protection, etc. all complete
as per drawings, specifications and instructions. Tile cost shall
include the cost of base screed/mortar.
(Tile base price = NPR 140 per sq.ft.).

Sq.m 34.44
9.5 Porcelein glazed wall tile
Providing and laying porcelein glazed wall tile in approved
colours , shades of any size as approved by Engineer in toilet
walls over cement mortar 1:4 (1 cement : 4 sand) and joint
filed with waterproof non-shrink polymer joint mortar in
required colour, including surface preparation, scaffolding,
protection, cleaning, etc. all complete as pr drawings,
specifications and instructions of the Engineer.
Sq.m 206.98
9.6 Flag Stones paving
Providing, laying flag stones with smooth surface(25 -
37.5mm thk.) on
terrace, balcony etc with 1:4 c/s mortar including necessary
curing, in line, level all complete as per design, drawing,
specifications and instructions of the consultant.
Sq.m 306.43
9.7 Roofing
Supplying and laying machine made clay tile roofing in
required line and level as directed by consultant Sq.m 114.89
Total
VAT13%
Grand Total
re Pvt. Ltd.

Rate(without VAT) Remarks

in word
 Annapurna Health Care Pvt. Ltd
Banepa, Kavre, Nepal
Bill of Quantity
Project Name: Annapurna Healtj Care (Block-4)
Location: Magar Gaun, Banepa, Kavre
Rate (wi
S.N Description units Quantity
In Figure
2 Earthwork in excavation in foundation
Excavation of foundation in all type of soils for
foundation,trenches,footing,pits etc to the required depth
including dewatering by manual or mechanical means etc .as
per specifications with all contractors own machinery and
equipments providing crossing of
track,shoring,strutting,timbering and buttressing with
appropriate materials and all such measures necessary to
retain in position the sides of foundation pit and including
refilling the excavated material with watering
,ramming.levelling the site and disposing off the
surplus/unusable earth to outside the constrution premises
etc all complete as per drawings,specification and instruction
of the engineers.

Cu.m 1485.95
3 Earthwork in filling
Back filling in foundation,floors and sides of foundation with
approved soil obtained frome the excavation at site and
stacked at site in layer not exceeding 15cm thick (compacted
thickness)including transportation of soil ,spreading in
required line and level ,sparkling water,ramming,compacting
with mechanical rammers,testing etc.all complete as per
drawing,specification and instruction of engineer

Cu.m 332.79
4 Flat brick soling
Supplying and laying dry flat brick,below the foundations ,tie
beam ,in all rooms of ground floor with sand
binding,ramming,compacting,levelling all complete in perfect
line and level as per drawing,specification and instruction of
consultant.
Sq.m 460.53
5 Concreting works
5.1 3"thick Plain Cement Concrete PCC (1:3:6)
 Providing and laying machine mixed plain cement concrete of
nominal mix 1:3:6(cement:sand:aggregate) for levelling
course in foundation and floor of building,pathway,etc in all
level with broken stone aggregate not more than 25mm if
approved quality including formwork wherever necessary
dewatering,batc;hing,mixing,transporting,placing,compacting,
curing,including all lead and lift etc all complete as per
drawings ,specification,and instruction of the engineer.

Cu.m 35.09
5.2 Plain Cement Concrete (1:2:4)
Providing and laying machine mixed plain cement concrete of
nominal mix 1:2:4(cement:sand:aggregate) for levelling
course in floor of building,pathway,etc in all level with broken
stone aggregate not more than 25mm if approved quality
including formwork wherever necessary
dewatering,batc;hing,mixing,transporting,placing,compacting,
curing,including all lead and lift etc all complete as per
drawings ,specification,and instruction of the engineer.

Cu.m 76.39
6 PCC work for RCC work (1:1.5:3)
Providing and laying in position machine mixed and machine
vibrated designed mixed cement concrete of specified grade
for reinforced cement concrete work using OPC 43 grade
cement with various design mixes (various grade of
concrete)with 20mm graded machine crused stone aggregate
of approved quality in various locations and heights including
transportation of concrete to site of placing
,compaction,finish to required line and level ,protection and
curing etc all complete as per drawing,specification and the
instruction of the engineer,but excluding the cost of centering
,shuttering, and reinforcement,but including the cost of
admixtures in recommended propotion as per to accelerate
,retard setting of the concrete improve workability ,improve
strength without imparing strength and durability as deriction
of the engineer for the following grade of structural concrete.

Cu.m 291.72
7 Formwork
Suplying and laying centering ,shuttering of various pattern
formworks with 19 mm thick waterproof plywood and steel
adjustable props for alll kind of RCC works for foundation
,column,shear walls,beams,slabs,staircase ,lintel,sill including
nails,proping scafoldings,stagging,supporting and bracing in
proper line and level,sealing the joints with heavy duty brown
self adhesive tape,aligning to line and levels and removing
completely as per drawing and instruction of consultant

Sq.m 2299.04
 8 brick work
Providing and laying first class chimney fired brick one or
more brick thick wall in cement mortar 1:4 (1 cement : 6
coarse sand) in foundation up to plinth, superstructure and
other specified places in all heights and level including the
cost of single or multi stage scaffolding, soaking bricks,
curing, raking joints, provision for recesses, openings,
toothing etc., all complete as per drawing, specifications and
instructions of the
Engineer.

Cu.m 245.47
9 plaster work
9.1 Internal plaster (1:6)
Providing and applying at all levels and shape 20 mm
thick cement plaster in building inside in specified cement
mortar in two layers as 6 to
8 mm thick final coat with 1:6 (1 cement :6 fine sand) cement
mortar over the 12 to 14 mm thick 1:6 (1 cement : 6 coarse
sand) under coat in all surface at all height including mixing
mortar, laying in perfect line, level and plumb and finishining
in regular and even surface including all necessary single or
multi-stage scaffolding, providing and fixing , making grooves
and recesses, throating, dusting, dripping, wetting, curing,
protection, etc., all complete as per drawing , specification
and instruction

Sq.m 1641.80
9.2 ceiling plaster (1:4)
12.5.mm, thick cement and sand plaster work of mix 1:4 (1
cement & 4 sand) in concrete surface, ceiling surface at all
height including mixing mortar, laying in perfect line, level
and plumb and finishing in regular and even surface including
all necessary single or multi-stage scaffolding, providing and
fixing 200 mm wide 24 gauge GI Chicken wire mesh at
junction of R.C.C. and masonry, making grooves and recesses,
throating, dusting, dripping, wetting, curing, protection,
etc. all complete as per drawing , specification and
instruction. [Rate shall also include for providing drips
band, moulds, groove, chicken wire mesh at junction of RCC
and masonry, etc., to complete the works at any heights].

Sq.m 964.42
9.3 Flushing point work
Providing and applying flush pointing on the brick surface in
lime & surkhi mortar in ratio of 1:2 in required line and level
all complete as per instruction of consultant for 100m2
Sq.m 952.02
9.4 Distemper painting works
 Supplying and laying approved quality, brand and color of
destemper painting in two coats in uniform color including
base coat of primer all complete as per design, drawings,
specifications and instructions of the
Consultant.
Sq.m 2606.21
9.5 wall care putty
Providing and applying wall care putty on inner wall and
ceiling surface as per design, drawings, specifications, and
instructions of the consultant.
Sq.m 2606.21
10 flooring works
10.1 parquet flooring work
Supplying, laying 10 mm thick Jangali sisam wood parquet
flooring on living, family room & passage with approved
quality, size and in pattern with necessary jointing material,
grinding, polishing all complete as per design, drawing,
specifications and instruction of the Consultant.
Sq.m 281.50
10.2 marble flooring works
Providing and fixing in position 19mm thick gang saw cut
mirror polished (premoulded and prepolished) machine cut
marble for stairs, similar locations of required size of
approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 (1 cement : 4 coarse
sand) with joints treated with white cement mixed with
matching pigment, epoxy touch ups, including rubbing
curing, molding, 4 numbers of flame cut groove at each
tread, polishing to edge to give high gloss finish at all level,
etc., all complete as per drawing, specification and instruction
of the Engineer. [Rate shall include for preparation of
base surface & finished the surface, protection with
gypsum/pop layer over plastic sheet and removing the same
before handing over, work at all levels, as directed by the
Engineer]. ( Marble Base Price NRs. 140.00 per Sft.)

Sq.m 515.63
10.3 marble skirting
- do - as above, but for skirting with rounding top edge. Sq.m 30.82
10.4 Marble extra for nosing
Extra over for nosing in Marble for stair/steps treads R.m 41.15
10.5 Virtified ceramic tile flooring
 Providing and fixing 1st quality vitrified ceramic tiles in
required line, level conforming to the standard mentioned in
specification of minimum thickness 8mm of approved make
(Somany tiles or equivalent) in any colours , shades of any
size as approved by Engineer in floor over cement screed
with cement paste and joint filed with waterproof non-
shrink polymer joint mortar in required colour, including
surface preparation, scaffolding, protection, etc. all complete
as per drawings, specifications and instructions. Tile cost shall
include the cost of base screed/mortar.
(Tile base price = NPR 140 per sq.ft.).

Sq.m 72.72
11 Porcelein glazed wall tile
Providing and laying porcelein glazed wall tile in approved
colours , shades of any size as approved by Engineer in toilet
walls over cement mortar 1:4 (1 cement : 4 sand) and joint
filed with waterproof non-shrink polymer joint mortar in
required colour, including surface preparation, scaffolding,
protection, cleaning, etc. all complete as pr drawings,
specifications and instructions of the Engineer.
Sq.m 96.66
12 Flag stone paving
Providing, laying flag stones with smooth surface(25 -
37.5mm thk.) on
terrace, balcony etc with 1:4 c/s mortar including necessary
curing, in line, level all complete as per design, drawing,
specifications and instructions of the consultant.
Sq.m 191.26
13 Roofing
Supplying and laying machine made clay tile roofing in
required line and level as directed by consultant Sq.m 143.35
14 Door and window works
14.1 Supplying and installation of UPVC Profile Sliding window with
galvanized steel reinforcement of 1.5 mm, 5 mm thick clear
glass, insect net, patented standard hardware like: rollers,
gaskets,brush seal, moon locks drainage cover etc. as per
specification of Korean Standard.

14.1. UPVC sliding door with net (frame 52x88mm sash 88x42mm
wgite colour with 5mm glass) Sq.m 157.09
14.1. UPVC sliding window with net (frame 50x80mm sash
58x36mm white colour with 5mm glass) Sq.m 21.74
14.2 Wooden door
14.2. Supplying, making, fitting wooden frames for doors ( Frame
size 100 mm x 75 mm) with good finish of approved seasoned
salwood including fixing with MS holdfasts (3 nos. at each
side), all complete as per design,
drawing, specifications instructions of the Consultant.
Cu.m 1.49
14.2. Supplying, making, fitting panel door shutters (38mm) with
approved quality seasoned sal wood sides, single or double
leaf with, excluding frame works, including hinges (3 nos. -
100 mm long per leaf) brass tower bolts (150mm and
300mm), mortise lock (Godrej) and screws, nails, cleaning all
complete as per design, drawing, specifications instructions of
the Consultant.

Sq.m 7.04
14.2. Supplying, making, fitting readymade teak wood
doors(seasoned and poisned treated) single excluding frame
works, including hinges (3 nos. - 100 mm long per leaf) brass
tower bolts (150mm and 300mm), mortise lock (Godrej) and
screws, nails, cleaning all complete as per design, drawing,
specifications instructions of
the Consultant.
Sq.m 47.40
14.2. Supplying and applying three coat chapra painting in
teakwood door in required line and level as per instruction of
consultant
Sq.m 47.40
14.2. Enamel painting works
Supplying and application of enamel paint of approved
quality on windows & Wire Mesh Doors & Windows in two
coats over one coat of primer in properly sanded surface all
complete as per design, drawings,
specifications and instructions of the Consultant.
Sq.m 69.01
15 Stainless steel railing
15.1 Staircase Railing
Providing, fabricating and fixing in position pre-fabricated
stainless steel staircase railing as per drawing with 3 rows of
25mm diameter Stainless Steel (SS) pipe, 60mm diameter SS
handrail of 304 grade, 16 SWG thick to be supported at a
distance of maximum of 1.5 meters with a SS (304 grade)
Balustrade to be fixed to the concrete member with
anchor fasteners and the flats with holes of 10 mm dia
with all labour and materials and consumables, grinding,
milling, polishing etc. all complete
as per drawings, specifications and instructions of the
Engineer.

R.m 50.29
16 Reinforcement
providing and fixing in position Fe500 steel reinforcement of
various diameter conforming to relevant is code in RCC works
including straightening,cutting,binding,bending with 20swg
annealed wire for tying the reinforcement bar at each
junction(binding wire shall not be measured
seperately)including all waste and cut pieces,provision for
adquete number of spacers,chairs,providing and placing
cement mortar (1:1) cover blocks to keep the bars in the
intended position at all levels all complete as per drawing
specifications and instruction of the engineer.(authorised lap
length and for the bar length exceeding 10m in length shall be
measured for the payment)

Mt 39.82
Total
13%VAT
Grand Total
Care Pvt. Ltd.
pal
tity

Rate (without VAT)

Remarks
In words