Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    MFT Remote Controller: User's Manual

    Uploaded by

    Ghallab Alsadeh

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MFT Remote Controller: User's Manual

    Uploaded by

    Ghallab Alsadeh
    28 views9 pages

    Original Title

    IMB8078WB-01EN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views9 pages

    MFT Remote Controller: User's Manual

    Uploaded by

    Ghallab Alsadeh

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 9

    User’s

    Manual
    MFT Remote Controller

    IM B8078WB-01EN
    1st Edition
    This user's manual contains useful information about the precautions, functions, and operating
    procedures of the MFT Remote Controller program that is downloadable from http://www.yokogawa.
    com/tm/tm-softdownload.htm. To ensure correct use, please read this manual thoroughly during
    operation.
    After reading the manual, keep it in a convenient location for quick reference whenever a question
    arises during operation.
    For information about the handling precautions, functions, and operating procedures of the AQ1000
    series Multi Field Tester, and the handling and operating procedures of Windows, see the manuals that
    accompany the particular instrument you are using.

    Notes
    ・ The contents of this manual are subject to change without prior notice as a result of continuing
    improvements to the instrument's performance and functions. The figures given in this manual may
    differ from the actual screen.
    ・ Every effort has been made in the preparation of this manual to ensure the accuracy of its
    contents. However, should you have any questions or find any errors, please contact your nearest
    YOKOGAWA dealer.
    • Copying or reproducing all or any part of the contents of this manual without YOKOGAWA’s
    permission is strictly prohibited.

    Trademarks
    ・ MS-DOS and Windows are either registered trademarks or trademarks of Microsoft Corporation in
    the United States and/or other countries.
    ・ Adobe and Acrobat are trademarks of Adobe Systems incorporated.
    ・ For purposes of this manual, the TM and ® symbols do not accompany their respective trademark
    names or registered trademark names.
    ・ Other company and product names are trademarks or registered trademarks of their respective
    companies.

    Revisions
    1st Edition: November 2009

    1st Edition : November 2009 (YK)


    All Rights Reserved, Copyright © 2009 Yokogawa Electric Corporation

    IM B8078WB-01EN 
    ii IM B8078WB-01EN
    Contents
    Product Overview..............................................................................................................................1
    Notes about Using This Software......................................................................................................2
    1. Controlling AQ1000 Series Multi Field Testers......................................................................3
    2. Control Window Operation....................................................................................................5

    IM B8078WB-01EN iii
    Product Overview

    Feature
    You can use the USB or Ethernet interface to control an AQ1000 Series Multi Field Tester from your
    PC.
    When you start this software, the front panel image (control window) of the connected AQ1000 Series
    Multi Field Tester is displayed on your PC's screen. You can use a mouse to control the AQ1000 Series
    Multi Field Tester from your PC in the same manner as if you were performing key operations.

    PC System Requirements
    PC
    A PC running Windows 2000, Windows XP, or Windows Vista with a CPU capable of running the OS
    smoothly and at least 256 MB of memory.

    Operating System
    Windows 2000, Windows XP, or Windows Vista

    Hard Disk Space


    At least 20 MB of free space for the installation.

    Display
    Resolution: 1024 x 768 dots or better
    Color: 256 colors or more (65536 colors or more recommended)

    Firmware Version of the AQ7270 OTDR Required for Operation


    Version 1.01 or later

    Others
    A dedicated driver is required if you are using the USB interface. The driver can be downloaded from
    the following Web site.
    http://www.yokogawa.com/tm/tm-softdownload.htm

    IM B8078WB-01EN 
    Notes about Using This Software

    Disclaimer
    Yokogawa Electric Corporation assumes no responsibility for any and all damages that may occur
    directly or indirectly through the use of this software.

    Operating Precautions
    • Do not operate the AQ1000 Series Multi Field Tester while using this software. Doing so may cause
    errors.
    • The software may stop functioning when the PC is in standby mode.
    Disable standby mode when you use this software.
    • When this software is running and you are using the Ethernet interface, the network load is 800
    kB/s maximum and 400 kB/s or less during normal use.
    When you want to use this feature, consult with your network administrator.
    • Do not use this software to change the AQ1000 Series Multi Field Tester's network or
    communication settings. Doing so may disconnect the software from the device.
    • Do not use this software to execute self-tests.
    • This software can only control one AQ1000 Series Multi Field Tester at a time. Additionally, multiple
    PCs cannot connect to the same AQ1000 Series Multi Field Tester at the same time.
    • You can start multiple instances of this software on a single PC and use each instance to control
    a separate AQ1000 Series Multi Field Tester, but the software's operations may become slow
    depending on your PC's specifications and the network status. Additionally, if you start multiple
    instances of this software on a single PC, the software may not operate correctly depending on your
    PC's CPU speed and memory size.
    • If a connection error disrupts the connection between the AQ1000 Series Multi Field Tester and the
    PC, turn the AQ1000 Series Multi Field Tester off and then on again.

     IM B8078WB-01EN
    1. Controlling AQ1000 Series Multi Field Testers

    Selecting the Interface


    1. Use the System screen on the AQ1000 Series Multi Field Tester to specify the interface that you
    want to use.
    For information on how to display the System screen and how to configure settings, see each
    AQ1000 Series Multi Field Tester's user's manual.

    Specify this setting when you want to use the USB


    interface (see section 10.1 in the AQ1000 Series
    Multi Field Tester's user's manual).

    Configure these settings when you want to use


    the Ethernet interface (see section 10.4 in the
    AQ1000 Series Multi Field Tester's user's manual).

    Ethernet Interface

    Set to “Valid.”

    Specify these settings as necessary.

    USB Interface
    On the System screen, Set USB Function to Control I/O.

    IM B8078WB-01EN 
    1. Controlling AQ1000 Series Multi Field Testers

    Starting the Software and Selecting the Interface


    2. Double-click the MFT Remote Controller icon on the desktop, or click Start, All Programs, MFT
    Remote Controller, and then click MFT Remote Controller to display the following dialog box.
    Select the interface that you want to use, and then specify the settings as necessary for the interface
    that you selected.

    Select the number (the instrument number that is written


    on the name plate on the bottom of the instrument) of
    Select the interface. the AQ1000 Series tester that you want to control.

    Detects the AQ1000 Series testers that


    are connected to the PC's USB ports

    Specify the same settings that you


    specified on the AQ1000 Series
    tester that you want to control.

    Controlling AQ1000 Series Multi Field Testers


    3. Click Connect to display the front panel image (control window) of the AQ1000 Series Multi Field
    Tester that you are connecting to.
    When you click a button that represents a key on the AQ1000 Series Multi Field Tester, the same
    operation occurs as if you had pressed the key on the actual instrument.

    Note
    For information on how to operate the AQ1000 Series Multi Field Testers, see each AQ1000 Series Field
    Tester's user's manual.

     IM B8078WB-01EN
    2. Control Window Operation

    Using the Mouse


    The displayed icon and the mouse operation vary depending on where the mouse pointer is located on
    the control window. The following table shows the mouse operation for each icon and the operation of
    the AQ1000 Series Multi Field Tester.

    Mouse Pointer Position Displayed Icon and Mouse Operation Operation


    Operation key
    Click operation Same as pressing the operation key
    Area to the left or right of the jog /
    shuttle
    Click operation Same as turning the jog shuttle to the
    left or right

    IM B8078WB-01EN 

    You might also like