D EUTSCHE NORM September 2004

DIN EN ISO 75-2 {

ICS 83.060; 83.080.01 Supersedes
March 1996 edition.

Plastics
Determination of temperature of deflection under load
Part 2: Plastics and ebonite
(ISO 75-2 : 2004)
English version of DIN EN ISO 75-2

Kunststoffe – Bestimmung der Wärmeformbeständigkeitstemperatur – Teil 2: Kunststoffe und

Hartgummi (ISO 75-2 : 2004)

European Standard EN ISO 75-2 : 2004 has the status of a DIN Standard.

A comma is used as the decimal marker.

National foreword
This standard has been published in accordance with a decision taken by CEN/TC 249 to adopt, without
alteration, International Standard ISO 75-2 as a European Standard.
The responsible German body involved in its preparation was the Normenausschuss Kunststoffe (Plastics
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

Standards Committee), Technical Committee Mechanische Eigenschaften und Probekörperherstellung.

The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as
follows:
ISO Standard DIN Standard
ISO 75-1 DIN EN ISO 75-1
ISO 293 DIN EN ISO 293
ISO 294-1 DIN EN ISO 294-1
ISO 2818 DIN EN ISO 2818
ISO 3167 DIN EN ISO 3167
ISO 10724-1 DIN EN ISO 10724-1

Amendments
This standard differs from the March 1996 edition in that details of testing have been changed.

Previous editions
DIN 53461: 1961-06, 1969-09, 1987-01; DIN EN ISO 75-2: 1996-03.

Continued overleaf.
Document comprises 14 pages.

Normenausschuss Bauwesen (NABau) im DIN

© No part of this standard may be reproduced without the prior permission of English price group 10
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, www.din.de
has the exclusive right of sale for German Standards (DIN-Normen). www.beuth.de
12.04 9598459
 Page 2
DIN EN ISO 75-2 : 2004-09

National Annex NA
Standards referred to
(and not included in Normative references and Bibliography)
DIN EN ISO 75-1 Plastics – Determination of temperature of deflection under load – Part 1: General test
method (ISO 75-1 : 2004)
DIN EN ISO 293 Plastics – Compression moulding test specimens of thermoplastic materials
(ISO 293 : 1986)
DIN EN ISO 294-1 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 1:
General principles, and moulding of multipurpose and bar test specimens
(ISO 294-1 : 1996)
DIN EN ISO 2818 Plastics – Preparation of test specimens by machining (ISO 2818 : 1994)
DIN EN ISO 3167 Plastics – Multipurpose test specimens (ISO 3167 : 2002)
DIN EN ISO 10724-1 Injection moulding of test specimens of thermosetting powder moulding compounds
(PMCs) – Part 1: General principles and moulding of multipurpose test specimens
(ISO 10724-1 : 1998)
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19
 EN ISO 75-2

May 2004

ICS 83.080.01; 83.060 Supersedes EN ISO 75-2 : 1996.

English version

Plastics
Determination of temperature of deflection under load
Part 2: Plastics and ebonite
(ISO 75-2 : 2004)

Plastiques – Détermination de la Kunststoffe – Bestimmung der Wär-

température de fléchissement sous meformbeständigkeitstemperatur –
charge – Partie 2: Plastiques et Teil 2: Kunststoffe und Hartgummi
ébonite (ISO 75-2 : 2004) (ISO 75-2 : 2004)

This European Standard was approved by CEN on 2003-06-20.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any
CEN member.
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

The European Standards exist in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a
CEN member into its own language and notified to the Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,
Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and
the United Kingdom.

ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung

Management Centre: rue de Stassart 36, B-1050 Brussels

© 2004. CEN – All rights of exploitation in any form and by any means Ref. No. EN ISO 75-2 : 2004 E
reserved worldwide for CEN national members.
 Page 2
EN ISO 75-2 : 2004

Foreword
International Standard
ISO 75-2 : 2004 Plastics – Determination of temperature of deflection under load – Part 2: Plastics and ebonite,
which was prepared by ISO/TC 61 ‘Plastics’ of the International Organization for Standardization, has been
adopted by Technical Committee CEN/TC 249 ‘Plastics’, the Secretariat of which is held by IBN, as a European
Standard.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, and conflicting national standards withdrawn, by November 2004 at the latest.
In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-
ing countries are bound to implement this European Standard:
Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,
Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.

Endorsement notice
The text of the International Standard ISO 75-2 : 2004 was approved by CEN as a European Standard without
any modification.

2
3
4
4
5
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

5
5
5
6
6
7
7
8
9
11
12
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

EN ISO 75-2 : 2004

Page 3
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

Page 4
EN ISO 75-2 : 2004
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

EN ISO 75-2 : 2004

Page 5
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

Page 6
EN ISO 75-2 : 2004
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

EN ISO 75-2 : 2004

Page 7
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

Page 8
EN ISO 75-2 : 2004
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

EN ISO 75-2 : 2004

Page 9
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

Page 10
EN ISO 75-2 : 2004
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

EN ISO 75-2 : 2004

Page 11
A&I-Normenabonnement - DaimlerChrysler AG - Kd.-Nr.2112003 - Abo-Nr.00028584/002/001 - 2005-01-05 13:14:19

Page 12
EN ISO 75-2 : 2004