Datasheet

SFCxx040GExD.docx

SFCxx040GExD – SFP Dual Fibre CWDM

ITU CWDM / 40km / Gigabit Ethernet

For your product safety, please read the following information carefully before any manipulation of the transceiver:

ESD
This transceiver is specified as ESD threshold 1kV for SFI pins and 2kV for all others electrical input pins, tested per MIL-STD-883G, Method 3015.4 /JESD22-
A114-A (HBM). However, normal ESD precautions are still required during the handling of this module.

LASER SAFETY
This is a Class1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated (June 24, 2007).

The optical ports of the module need to be terminated with an optical connector or with a dust plug in order to avoid contamination.

1. Overview
SFCxx040GExD is a high performance transceiver module for Gigabit Ethernet data links over a single mode fibre pair. The
maximum reach is 40km, with 16dB end of life (EOL) power budget. The transmitter is a CWDM DFB laser, the receiver is a PIN
1

photodiode.

This transceiver module is compliant with the Small Form-factor Pluggable (SFP) Multisource Agreement (MSA) and hot
pluggable. Always contact Skylane Optics commercial agents for compatibility with different equipment platforms.
®

2. Features
• SFP Multi-Source Agreement compliant [INF-8074i]
• Hot pluggable SFP footprint
• Serial ID functionality supported according to [SFF-8074i]
• Class 1 laser safety standard IEC 60825 compliant
• Dual LC connector
• CWDM DFB transmitter
• 40km point-to-point transmission on single mode fibre
• Operating temperature range 0°C to 70°C or -20°C to 85°C
• Low power dissipation (<1W) Figure 1. SFP Dual Fibre
• Digital diagnostics monitoring (DDM) (non-binding illustration)

3. Applications
• Gigabit Ethernet
• 1×Fiber Channel

4. Optical Interface
Output Optical Optical Receiver Optical Receiver
Wavelength Power Budget2
P/N Power2 Sensitivity3 Overload4
[nm] [dB]
[dBm] [dBm] [dBm]
SFCxx040GExD ITU CWDM -5 to 0 ≤ -21 -3 ≥ 16
(47 to 61)

1. Distance is estimated assuming typical optical losses after decent quality fibre deployment; Only optical budget value is guaranteed.
2. EOL, over operating temperature range
3. Measured at 1.25Gbps, PRBS 27-1, ER=9dB, BER≤10-12
4. The optical input to the receiver should not exceed this value. Transmitters must never be directly connected to receivers (optical loop back) before ensuring that proper optical
attenuation is used.

Specification subject to change without notice 1

Datasheet
SFCxx040GExD.docx

5. Technical Parameters
5.1. Recommended Operating Conditions
Parameter Min Typ Max Unit Notes
Storage temperature -40 85 °C
0 70 °C SFCxx040GE0D
Operating Case Temperature
-20 85 °C SFCxx040GE1D
Relative Humidity 95 % Non condensing
Power Supply Voltage 3.15 3.3 3.45 V
Power Supply Current 300 mA

5.2. Transmitter Optical Specifications

Parameter Min Typ Max Units Notes
Average Output Power -5 0 dBm 5
Centre Wavelength Range 1470 1610
Wavelength λT -6 λT λT +7.5 nm 6
Spectral Width (-20dB) 1 nm
Extinction Ratio 8.2 dB

5. Output power coupled into a 9/125 µm single mode fibre

6. ITU-T G.694.2 CWDM. For available wavelengths, see section 9.

5.3. Receiver Optical Specifications

Parameter Min Typ Max Units Notes
Receiver Sensitivity -21 dBm 7
Receiver Overload -3 dBm 7
Receiver Operating Range 1260 1630 nm

7. Measured at 1.25Gbps, PRBS 27-1, ER=9dB, BER≤10-12

6. Transceiver Electrical Pad Layout

VeeT 20
1 VeeT TD- 19
2 TXFault TD+ 18
3 TX Disable VeeT 17
4 MOD-DEF (2) VccT 16
Towards BEZEL ← 5 MOD-DEF(1) VccR 15 → Towards ASIC
6 MOD-DEF(0) VeeR 14
7 Rate Select RD+ 13
8 LOS RD- 12
9 VeeR VeeR 11
10 VeeR

Figure 2. Transceiver Electrical Pad Layout

Specification subject to change without notice 2

Datasheet
SFCxx040GExD.docx

7. Module Electrical Pin Definition

Pin Number Name Function

1 VeeT Transmitter Ground
2 TX Fault Transmitter Fault Indication
3 TX_ Disable Transmitter Disable
4 MOD-DEF2 2-Wire Serial Interface Data
5 MOD-DEF1 2-Wire Serial Interface Clock
6 MOD-DEF0 Grounded in Module
7 Rate Select Not Connected
8 LOS Loss of Signal
9 VeeR Receiver Ground
10 VeeR Receiver Ground
11 VeeR Receiver Ground
12 RD- Inverted Received Data Out
13 RD+ Received Data Out
14 VeeR Receiver Ground
15 VccR Receiver Power
16 VccT Transmitter Power
17 VeeT Transmitter Ground
18 TD+ Transmit Data In
19 TD- Inverted Transmit Data In
20 VeeT Transmitter Ground

8. EEPROM

SFP MSA (INF-8472)

2 wire address 1010000x 2 wire address 1010001x

0 0
Alarm and Warning
Thresholds (56 bytes)
Serial ID Defined by
55
SFP MSA (96 bytes)
Cal Constants
(40 bytes)
95 95
Real Time Diagnostic
Vendor Specifics Interface (24 bytes)
(32 bytes)
119
Vendor Specifics (8 bytes)
127 127
User writable Eeprom
Reserved (120 bytes)
(128 bytes)
247
255 Vendor Specifics (8 bytes)
255

A0h A2h

Figure 3. EEPROM of a an SFP

Specification subject to change without notice 3

Datasheet
SFCxx040GExD.docx

9. Ordering Information

Part Number Description

SFP dual fibre CWDM, Tx 1470nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC47040GE0D
power budget 16dB, Gigabit Ethernet, LC connector, 0°C to 70°C, DDM
SFP dual fibre CWDM, Tx 1490nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC49040GE0D
power budget 16dB, Gigabit Ethernet, LC connector, 0°C to 70°C, DDM
SFP dual fibre CWDM, Tx 1510nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC51040GE0D
power budget 16dB, Gigabit Ethernet, LC connector, 0°C to 70°C, DDM
SFP dual fibre CWDM, Tx 1530nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC53040GE0D
power budget 16dB, Gigabit Ethernet, LC connector, 0°C to 70°C, DDM
SFP dual fibre CWDM, Tx 1550nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC55040GE0D
power budget 16dB, Gigabit Ethernet, LC connector, 0°C to 70°C, DDM
SFP dual fibre CWDM, Tx 1570nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC57040GE0D
power budget 16dB, Gigabit Ethernet, LC connector, 0°C to 70°C, DDM
SFP dual fibre CWDM, Tx 1590nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC59040GE0D
power budget 16dB, Gigabit Ethernet, LC connector, 0°C to 70°C, DDM
SFP dual fibre CWDM, Tx 1610nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC61040GE0D
power budget 16dB, Gigabit Ethernet, LC connector, 0°C to 70°C, DDM
SFP dual fibre CWDM, Tx 1470nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC47040GE1D
power budget 16dB, Gigabit Ethernet, LC connector, -20°C to 85°C, DDM
SFP dual fibre CWDM, Tx 1490nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC49040GE1D
power budget 16dB, Gigabit Ethernet, LC connector, -20°C to 85°C, DDM
SFP dual fibre CWDM, Tx 1510nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC51040GE1D
power budget 16dB, Gigabit Ethernet, LC connector, -20°C to 85°C, DDM
SFP dual fibre CWDM, Tx 1530nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC53040GE1D
power budget 16dB, Gigabit Ethernet, LC connector, -20°C to 85°C, DDM
SFP dual fibre CWDM, Tx 1550nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC55040GE1D
power budget 16dB, Gigabit Ethernet, LC connector, -20°C to 85°C, DDM
SFP dual fibre CWDM, Tx 1570nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC57040GE1D
power budget 16dB, Gigabit Ethernet, LC connector, -20°C to 85°C, DDM
SFP dual fibre CWDM, Tx 1590nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC59040GE1D
power budget 16dB, Gigabit Ethernet, LC connector, -20°C to 85°C, DDM
SFP dual fibre CWDM, Tx 1610nm (CWDM DFB), Rx (PIN), maximum distance 40km,
SFC61040GE1D
power budget 16dB, Gigabit Ethernet, LC connector, -20°C to 85°C, DDM

10. Document Revision Information

Revision Description
A Initial release

Skylane Optics supplies a broad range of optical

®

transceivers. Our engineers work closely with our

customers to find the best solutions for every application.
We are committed to provide high quality products and Beyond
services to our customers. Quality

For questions on this product please contact:

support@skylaneoptics.com
Reliable
Alliance

Performing
Smartly

Specification subject to change without notice 4