NA201

Car Audio System Player

INSTRUCTION MANUAL

MP3 CD WMA USB AUX-IN

Contents
1 Safety 2
2 Preparation 2
3 What's in the box 2
4 Instauing and removing Guide 3
5 Installation / Connection 4
6 Basic Operation 5
7 Function Setting 6
Listening to the Radio 7
Listening to a Disc /USB/ device 8
Listening to the other-
external components 8
8 Remote Control Operation 9
9 Product Information 10

EN 1
Safety To prevent deterioration, do not touch the terminals of the unit and
faceplate with your fingers.
WARNING
Stop the car before operating the unit.
How to reset your unit
Important to know...
To prevent a short circuit, never put or leave any metallic objects
(such as coins or metal tools) inside the unit.
Caution: Adjust the volume so that you can hear sounds 1 3
outside the car. Driving with the volume too high may cause an
accident. 2
Condensation: When the car is air-conditioned, moisture may Reset
collect on the laser lens. This may cause disc read errors. In this case,
remove the disc and wait for the moisture to evaporate. If this unit fails to operate properly, press the reset button.
The illustrations in this manual are examples used to explain more The unit return to factory setting when the reset button is pressed.
clearly how the controls are used. Therefore, what appears on the
illustrations may differ from what appears on the actual
equipment.
If you experience problems during installation, consult your What’s in the box
Nakamichi dealer.
When you purchase external components, check with your Check and identify the contents of your package:
Nakamichi dealer to make sure that they work with your model and
in your area.

Maintenance
Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or
soft cloth. Failure to observe this precaution may result in damage to
the monitor or unit.
Cleaning the connector: Wipe off dirt on the connector of the unit and
faceplate. Use a cotton swab or cloth.

Preparation
ISO male
How to attach/detach the faceplate connector

Attach Detach

1 1

2 Screw x 4pcs
2

Do not expose the faceplate to direct sunlight, excessive heat, or

humidity. Also avoid places with too much dust or the possibility of
water splashing.
Keep the faceplate in its casing while detached.
The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.

2 EN
 Installing the unit

1
3

Sleeve Bend the appropriate

2
tabs to hold the sleeve
1
Trim plate firmly in place.

Control panel

2 Before attaching, make 18

2m
m

sure the direction of the

1 53
escutcheon is correct. mm

(Wider hooks on the Dashboard

bottom side.) 2
Screw
( not included in this packing )

3 Sleeve
4

Trim plate

Control panel

Removing the unit

1 Detach the control panel. Disassembly
2 Engage the catch pin on the removal tools into the holes on Trim plate
both sides of the escutcheon, then pull it out.
3 Insert the disassembly tools deeply into the slots on each Sleeve
side, then follow the arrows instructions as shown on the 3
right.
1 2

Disassembly
Control panel

EN 3
Installation / Connection
Basic Procedure Caution
1 Remove the key from the ignition switch, then disconnect If your car’s ignition does not have an ACC position, connect the ignition
wires to a power source that can be turned on and off with the ignition key. If
the terminal of the car battery. you connect the ignition wire to a power source with a constant voltage
2 Make proper input and output wire connections. supply, as with battery wires, the battery may die.
Install this unit in the console of your vehicle. Make sure the faceplate will
3 Install the unit to your car. not hit the lid of the console (if any) when closing and opening.
4 Reconnect the terminal of the car battery. After the unit is installed, check whether the brake lamps, blinkers, wipers,
etc. on the car are working properly.
5 Reset the unit. Mount the unit so that the mounting angle is 30° or less.
If the fuse blows, first make sure the wires are not touching to cause a short
Warning circuit, then replace the old fuse with one that has the same rating.
The unit can only be installed in a car with a 12 V DC power supply, negative Connect the speaker wires correctly to the terminals to which they
ground. correspond. The unit may be damaged or fail to work if you share
If you connect the ignition wire (red) and the battery wire (yellow) to the car the wires or ground them to any metal part in the car.
chassis (ground), you may cause a short circuit, that in turn may start a fire.
Always connect those wires to the power source running through the fuse box. When only two speakers are being connected to the system, connect the
connectors either to both the front output terminals or to both the rear
Disconnect the battery’s negative terminal and make all electrical output terminals (do not mix front and rear).
connections before installing the unit.
Mounting and wiring this product requires skills and experience. For
Insulate unconnected wires with vinyl tape or other similar material. To safety’s sake, leave this work to professionals.
prevent a short circuit, do not remove the caps on the ends of the If you experience problems during installation, consult your Nakamichi
unconnected wires or the terminals. dealer.
Be sure to ground this unit to the car’s chassis again after installation.
If the power is not turned ON, the speaker wire may have a short-circuit or
touched the chassis of the vehicle and the protection function may have
been activated. Therefore, the speaker wire should be checked.

Wiring Connection
White FRONT LINE OUT(L)
Red FRONT LINE OUT(R)
ISO Connector BULE SUB-Woofer out Rear RCA
Output (Left)
1 3 5 7
B
2 4 6 8
FM/AM Antenna Socket
5 7
A 4 8

Rear RCA Output (Right) Antenna Jack(not included)

ISO Connector Wiring Chart
Pin Color and function Pin Color and function
A4 Yellow Battery(+) B1/B2 Violet + / Violet/Black Right rear speaker
A5 Blue Connect to system control terminal B3/B4 Grey + / Grey/Black Right front speaker
of the power AMP or auto antenna
relaycontrol terminal(Max 150MA 12VDC)
A7 Red Ignition(ACC) B5/B6 White + / White/Black Left front speaker
A8 Black Ground B7/B8 Green + / Green/Black Left rear speaker

4 EN
Basic Operation
Rotatory Volume Knob Loading slot Eject the disc

Detach the
control panel Aux-In jack
Power / Mute Display window
USB terminal

When you press or hold the following button(s)...

Main unit General operation
SRC Select the available sources ( AUX Input,Tuner, ), if the power is turned on.
Rotatory Rotate it to increase or decrease the volume.
Volume knob Select items.
■ Turn mute or restore volume.
■ Turn the unit on. Press and hold again to turn the unit off.
Power / Mute ■ Confirms selection.
■ Select the FM bands (FM1/ FM2/ FM3) or AM1 (MW1) / AM2 (Mw2).
■ Press and hold to activate the Auto Store function.
1 Pause/resumes playback of a USB device.
■ Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode.
■ Under Media playback mode to skip track / file, press and hold to fast forward / backward.
To access into the Audio Menu mode, press and hold to enter into the System Menu mode.
Press to turn On or Off dynamic bass boost sound.
■ Under Media playback mode to view play or clock informations.

EQ To adjust the EQ (Preset Equalizer) setting.

■ Returns to the previous item.

■ Under media playback to access into search mode.

EN 5
Function Setting
1 Press to access into the [AUDIO MENU] mode, press and hold to enter into the [MENU] mode.

2 Press [MENU] repeatedly to select the item to be adjusted.

3 Turn the encoder volume knob to select a value / option.
[AUDIO MENU]
Item Selectable Setting
BASS ADJUST
BASS LEVEL Adjust the level -7 to +7.
TREBLE ADJUST
TREBLE LEVEL Adjust the level -7 to +7.
BALANCE Adjust the balance between the right and left speakers from 10R (full right) to
10L (full left).
FADER Adjust the fader between the front and rear speakers from 10R (full rear) to
10F (full front).
[MENU] Mode Setting
1 Press and hold to enter into the [MENU] mode.
2 Press [MENU] repeatedly to select the item to be adjusted.
3 Turn the encoder volume knob to select a value / option.
Item Selectable Setting
RDS On/Off Turn On or Off the RDS function.
Once into the PTY mode, press the get into program type item, and rotating encoder
volume knob to selected category.
PTY ■ Available Program Type:
(Program Type) POP M; ROCK M; EASY M; LIGHT M; CLASSICS; OTHER M; JAZZ M; COUNTRY; NATION M; OLDIES M;
FOLK M; A-TEST; ALARM; NEWS; AFFAIRS; INFO; SPORT; EDUCATE; DRAMA; CULTURE; SCIENCE;
VARIED; WEATHER; FINANCE; CHILDREN; SOCIAL; RELIGION; PHONE IN; TRAVEL; LEISURE;
DOCUMENT
AF ■ ON: The unit will be searches for another station with stronger signal, but with the same program

(Alternate Frequencies) identification as the current station automatically.

■ OFF: Cancel

■ ON: When there is traffic announcement, the unit switches to the tuner mode (regardless of the
TA current mode) and begins to broadcast the announcemet on traffic conditions. When the
(Traffic Announcement) trafficannouncement is over, it returns to the previous mode.
■ OFF: Traffic announcement does not cut in.

Press the to access into Auto Store mode, the six strongest stations of the selected band
AUTO STORE are saved in preset channel automatically: FM1, FM2, FM3(1-6), AM1, AM2.
To receive more radio stations or only stations with strong signal, you can adjust the radio
LOC ON/OFF sensitivity.
Select suitable country region of the radio: USA; LATIN; EUROPE; RUSSIA(Oirt); M-EAST; ASIA; JAPAN;
AREA AUST (Australia)
BEEP TONE Turn On or Off this beep sound
CLOCK SET Adjust the Hours and Minutes
CLOCK FORMAT Select the time format 12H or 24H
6 EN
Listening to the Radio

■ Hold for about 2 seconds to memorize the current station .

■ Press briefly to recall memorized station.
1 Press BND repeatedly to a band ( FM1, FM2, FM3,
AM1(MW1) or AM2 (MW2) .
2 Press to search for a station.

EN 7
Listening to a Disc /USB/ device
Detaches the
control panel
■ Press to repeat one track, ■ Press to start random play,
Press again to repeat a folder. press again to radom a folder.

Press into search mode Press to move next/previous a folder.

Press to pause. Press again to resume playback. ■ Press to select a track / file.

Playing a disc ■ Press and hold for fast forward / backward.

Insert the disc into the Disc Slot with label side facing up, the
unit will play starts automatically.
Playing a USB device
1 Slide the USB socket cover market to the left.
2 Insert the USB device into the USB socket. The unit starts
playing from the USB device automatically.

Listening to the other external components

Auxiliary input jack

1 Press the SRC to select AUX IN-link mode.

3.5 mm Cable
2 Turn on the external component and start playing.
(not included)

8 EN
Remote Control Operation

SRC AUDIO

When you press or hold the following button(s)...

Main unit General operation
Turn mute or restore volume.
Press turn the unit on or off.
Press increase the volume.
Press decrease the volume.
■ Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek
mode.
■ Under Media playback mode to skip track / file, press and hold to fast forward / backward.

SRC Select the available sources (Radio, Disc, USB or Aux-In ), if the power is turned on.

AUDIO Press to access into the Audio Menu mode.

EN 9
Product Information
General About Audio file
Power Supply: 12V DC (10.5-14.4V), negative ground ■ USB or memory file system: FAT16, FAT32
Fuse: 15A ■
MP3/WMA bit rate: 32-320kbps and varible bit rate
Suitable Speaker Impedance: 4 -8 ■ MP3 sampling frequencies: 8-48kHz
MP3-Link level: 500mV ■ WMA sampling frequencies: 32kHz, 44.1kHz, 48kHz
Audio Section ■ ID3 tag v1.0 or later
Maximum Power Output: Mosfet 50W x 4 Channels
Continous Power Output: 20W x 4 RMS
Built- in RCA for Rear Speaker
FM tuner section
Frequency Range: 87.5 - 108MHz
Usable Sensitivity: Better than 15dB at S/N 30dB

AM tuner section
Frequency Range: 522 - 1620KHz
Usable Sensitivity: Better than 45dB at S/N 26dB
USB devices
USB Flash Memory: USB 1.1 & 2.0 Compatible

10 EN
752-0MW095NK-01-20
www.nakamichicaraudio.com