A Single-Phase Single-Stage Switched-Boost Inverter With Four Switches
A Single-Phase Single-Stage Switched-Boost Inverter With Four Switches
A Single-Phase Single-Stage Switched-Boost Inverter With Four Switches
INTRODUCTION:
DRAWBACKS:
PROPOSED SYSTEM:
the proposed single-phase single-stage SBI with four switches.
The switch S0 in the Qsbi is replaced by the second H-bridge leg
with two switches S3 and S4 . As a result, the proposed inverter
is reduced one active switch compared to the qSBI. A switched-
boost network is a combination of one inductor (L1 ), one
capacitor (C1 ), two diodes (Da,Db ), and four switches. A
capacitor Cd filter is used to remove the dc offset component at
the output. The output of the inverter is connected to a passive
load (RLf ).When Da is fully forward-based, a combination of
L1 − C1 − Db − S1 − S2 plays a role as a boost converter.
When Db is fully forward based, a combination of L1 − C1 −
Da − S3 − S4 plays a role as another boost converter. As a
result, two boost converters are integrated to one in the proposed
inverter.
ADVANTAGES:
The proposed inverter has a high reliability because it
immunizes both shoot-through and open-circuit
phenomenon.
In addition, the ac output voltage of the proposed inverter is
higher or lower than the dc input voltage.
APPLICATIONS:
Photo voltaic system
Grid tied system