Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

cdd42047 VSX d607s

Download as pdf or txt
Download as pdf or txt
You are on page 1of 67

RECEIVER POWER TV POWER

POWER TV
G FU
TIN NC
MU
FQ

ENTER

FQ

VOL VOL
CHANNEL

MULTI CONTROL
DVD LD/SAT CD

VCR TV CONTROL TUNER

ORDER NO.
PERSONAL
SURROUND

DSP MODE ATT TEST TONE

CENTER REAR

SUBWOOFER EFFECT
DISC
CLASS TV/VCR
FUNCTION MODE CHECK

RRV1897
MULTI COMMANDER
OPERATION SYSTEM OFF SET UP

MULTI CONTROL COMMANDER


PRE-PROGRAMMED AND LEARNING

AUDIO/VIDEO MULTI-CHANNEL RECEIVER

VSX-D607S
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model The voltage can be converted by the
Type Power Requirement
VSX-D607S following method.
KUXJI AC120V
KCXJI AC120V
SDXJI AC110V/120-127V/220V/240V With the voltage selector

CONTENTS
1. SAFETY INFORMATION ...................................... 2 7. GENERAL INFORMATION ................................ 53
2. EXPLODED VIEWS AND PARTS LIST ................ 3 7.1 DISPLAY ....................................................... 53
3. SCHEMATIC DIAGRAM ....................................... 8 7.2 PCB LOCATION ........................................... 55
4. PCB CONNECTION DIAGRAM .......................... 32 7.3 BLOCK DIAGRAM ........................................ 56
5. PCB PARTS LIST ............................................... 44 7.4 REMOTE CONTROL UNIT .......................... 58
6. ADJUSTMENT .................................................... 51 [CU-VSX128 (AXD7153)]
8. PANEL FACILITIES AND SPECIFICATIONS .... 62

PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Lane Crawford Place, Singapore 0923
c PIONEER ELECTRONIC CORPORATION 1998
T - IZK JAN. 1998 Printed in Japan
VSX-D607S

1. SAFETY INFORMATION
This service manual is intended for qualified service technicians ; it is not meant for the casual do-it-
yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained
to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.
WARNING
Lead in solder used in this product is listed by the California Health and Welfare agency as a known reproductive toxicant which may
cause birth defects or other reproductive harm (California Health & Safety Code, Section 25249.5).
When servicing or handling circuit boards and other components which contain lead in solder, avoid unprotected skin contact with
the solder. Also, when soldering do not inhale any smoke or fumes produced.

NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement parts must
be of identical designation.

REMARQUE
(POUR MODÈLE CANADIEN SEULEMENT)
Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que les pièces
de remplacement doivent avoir la même désignation.

(FOR USA MODEL ONLY)

1. SAFETY PRECAUTIONS ANY MEASUREMENTS NOT WITHIN THE LIMITS


OUTLINED ABOVE ARE INDICATIVE OF A POTENTIAL
The following check should be performed for the
continued protection of the customer and service SHOCK HAZARD AND MUST BE CORRECTED BEFORE
technician. RETURNING THE APPLIANCE TO THE CUSTOMER.

LEAKAGE CURRENT CHECK


Measure leakage current to a known earth ground (water 2. PRODUCT SAFETY NOTICE
pipe, conduit, etc.) by connecting a leakage current tester Many electrical and mechanical parts in the appliance
such as Simpson Model 229-2 or equivalent between the have special safety related characteristics. These are
earth ground and all exposed metal parts of the appliance often not evident from visual inspection nor the protection
(input/output terminals, screwheads, metal overlays, control afforded by them necessarily can be obtained by using
shaft, etc.). Plug the AC line cord of the appliance directly replacement components rated for voltage, wattage, etc.
into a 120V AC 60Hz outlet and turn the AC power switch Replacement parts which have these special safety
on. Any current measured must not exceed 0.5mA. characteristics are identified in this Service Manual.
Electrical components having such features are identified
by marking with a on the schematics and on the parts list
Reading should in this Service Manual.
Leakage not be above The use of a substitute replacement component which does
Device current 0.5mA
under tester not have the same safety characteristics as the PIONEER
test recommended replacement one, shown in the parts list in
Test all this Service Manual, may create shock, fire, or other hazards.
exposed metal Product Safety is continuously under review and new
surfaces
instructions are issued from time to time. For the latest
information, always consult the current PIONEER Service
Manual. A subscription to, or additional copies of, PIONEER
Also test with
plug reversed Earth Service Manual may be obtained at a nominal charge from
(Using AC adapter ground PIONEER.
plug as required)

AC Leakage Test

2
VSX-D607S

2. EXPLODED VIEWS AND PARTS LIST


NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
• The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• Screws adjacent to mark on the product are used for disassembly.
2.1 PACKING
2
(1) PACKING PARTS LIST
Mark No. Description Part No.
6 NSP 1 Dry Cell Battery (LR6,AA) AEX1007
SDXJI Type Only 2 FM Antenna ADH7004
3 Operating Instructions See Contrast table (2)
4 Sub Instruction Manual ARH7015
15
Refer to (Remote Control Unit)(English)
"7.4 REMOTE CONTROL UNIT".
9 8 NSP 5 Warranty Card See Contrast table (2)
6 AM Loop Antenna ATB7009
KCXJI Type Only
7 Sub Instruction Manual ARH7030
5 (AC-3) (English)
7 8 Operating Instructions See Contrast table (2)
1 (French)
4
3 9 Remote Control Unit AXD7153
(CU-VSX128)
11 10 Front Pad AHA7137
11 Rear Pad AHA7140
12 Packing Case See Contrast table (2)

13 Packing Sheet AHG7010


14 Sub Pad B AHB7027
15 Caution 220V Label See Contrast table (2)

13

10
14

12

(2) CONTRAST TABLE


VSX-D607S/KUXJI, KCXJI and SDXJI are constructed the same except for the following :
Part No.
Mark No. Symbol and Description VSX-D607S VSX-D607S VSX-D607S Remarks
/KUXJI /KCXJI /SDXJI
3 Operating Instructions (English) ARB7140 ARB7140 Not used
3 Operating Instructions (English/Chinese/Spanish) Not used Not used ARE7155
NSP 5 Warranty Card ARY1051 ARY1075 ARY1077
8 Operating Instructions (French) Not used ARC7189 Not used
12 Packing Case AHD7570 AHD7570 AHD7571

15 Caution 220V Label Not used Not used ARR1003

3
VSX-D607S

2.2 EXTERIOR

50 50 45 50
14 3
19 27 45 56
27 5
2 13 50 16
45 32
13 33 14
14 56
45 13
33

11
14
33 50
15
25 50
33
SDXJI Type
Only
17 64
43 50
51
48 48 51 41
50 36
48

57 7
58
53
59

34
30
34 34

20
50

50 50
50

55
46 34
22

21
61
50 60
42

60 20
50
39 21 50

50 50

55

40 50 9

38 Refer to
50 "2.3 FRONT PANEL SECTION".

4
VSX-D607S

50

24

50
31

51

51
31

50
1

51 28 50
35
29

62 18
29
23 50
SDXJI Type
Only
50
50 37
54
63 50
50
10
51
50

44

50
26

12

5
VSX-D607S

(1) EXTERIOR PARTS LIST


Mark No. Description Part No. Mark No. Description Part No.
1 INPUT Assy See Contrast table (2) NSP 36 Clamper RNE1277
NSP 2 MOS FET Assy AWZ8497 37 Washer AEC7110
3 TRANS Assy AWZ8496 38 Round Knob L AAB7082
4 REG.1 Assy AWZ8507 39 Round Knob S AAB7106
5 R/C AMP Assy AWZ8504 40 Jog Knob AAB7048

6 FM/AM TUNER Module See Contrast table (2) 41 Trans Frame ANG7140
NSP 7 PRIMARY Assy See Contrast table (2) 42 Name Plate PAM1755
8 VIDEO/SR Assy AWZ8509 NSP 43 Cord with Plug (J105) DE012CD0
9 VOLUME Assy AWZ8047 44 Cushion Rubber AEB7081
10 R/C SPEAKER Assy See Contrast table (2) 45 Screw ABA1037

11 REG.2 Assy AWZ8498 46 PCB Stopper ANG7136


12 DOLBY DIGITAL Assy AWX7042 47 .• • • • •
13 Transistor(Q3,Q4,Q7,Q8,Q10) 2SA1962 48 Screw ABA7019
14 Transistor(Q1,Q2,Q5,Q6,Q9) 2SC5242 49 •••••
15 Power Transformer See Contrast table (2) 50 Screw BBZ30P080FZK

16 Fuse (FU3-FU5 : 1.6A) REK1077 51 Screw BBZ30P180FMC


17 Fuse (FU1) See Contrast table (2) 52 •••••
18 AC Power Cord See Contrast table (2) NSP 53 Binder ZCA-BK1
19 FET Plate ANG7124 54 Screw ABA7035
20 Insulator AMR7198 55 Screw ABA-298

21 Insulator PNW2766 56 Screw ABA1147


22 Chassis ANA7052 57 Barrier See Contrast table (2)
23 Rear Panel See Contrast table (2) 58 Push Rivet See Contrast table (2)
24 Bonnet Case ANE7136 59 Spacer AEE7024
25 Radiator ANH7050 NSP 60 Spacer AEB7092

26 Shield Case ANK7037 NSP 61 Spacer B AEB7086


NSP 27 Bushing AEC1402 62 Voltage Selector (S1) See Contrast table (2)
NSP 28 Cushion AEB7076 63 Voltage Selector (S2) See Contrast table (2)
29 PCB Support AEC1581 64 Fuse (FU2 : 3.15A) See Contrast table (2)
30 PCB Support AEC7006

31 PCB Support AEC7056


32 Sheet AEE1028
33 Sheet AEE7010
34 PCB Mold AMR2533
35 Cord Stopper See Contrast table (2)

(2) CONTRAST TABLE


VSX-D607S/KUXJI, KCXJI and SDXJI are constructed the same except for the following :
Part No.
Mark No. Symbol and Description VSX-D607S VSX-D607S VSX-D607S Remarks
/KUXJI /KCXJI /SDXJI
1 INPUT Assy AWX7148 AWX7148 AWX7149
6 FM/AM TUNER Module AXQ7219 AXQ7219 AXQ3112
NSP 7 PRIMARY Assy AWZ8865 AWZ8865 AWZ8866
10 R/C SPEAKER Assy AWZ8505 AWZ8505 AWZ8613
15 Power transformer (AC120V) ATS7161 ATS7161 Not used

15 Power transformer (AC110V/120-127V/220V/240V) Not used Not used ATS7163


17 Fuse (FU1 : 6.3A) REK1085 REK1085 Not used
17 Fuse (FU1 : 3.15A) Not used Not used REK1064
18 AC Power Cord PDG1015 PDG1015 ADG1157
23 Rear Panel ANC7650 ANC7650 ANC7652

35 Cord Stopper CM-22C CM-22C CM-22B


57 Barrier Not used Not used AEC7137
58 Push Rivet Not used Not used AEC7138
62 Voltage Selector (S1) Not used Not used AKX-507
63 Voltage Selector (S2) Not used Not used AKX1004

64 Fuse (FU2 : 3.15A) Not used Not used REK1064

6
VSX-D607S

2.3 FRONT PANEL SECTION

15

3 15
15 15

15
15
9
5 15
15

1 15
15
15
15 14

14

11 4

2
8

6
12 13

16 10

• FRONT PANEL SECTION PARTS LIST


Mark No. Description Part No. Mark No. Description Part No.
NSP 1 POWER SWITCH Assy AWZ8501 11 FL Filter AAK7294
NSP 2 FRONT INPUT Assy AWZ8502 12 Sub Panel AAP7042
3 FL/U-COM Assy AWZ8043 13 Front Panel AMB7501
NSP 4 Housing 5P Shield (J27) ADX1653 14 Screw ABA7009
5 Power Button AAD7325 15 Screw BPZ30P080FMC

6 Tuner Button AAD7326 16 Screw BBZ30P080FZK


7 Input Button AAD7327
8 Func. Button AAD7328
9 SFC Button AAD7329
10 FL Panel AAK7295

7
1 2 3 4
VSX-D607S

3. SCHEMATIC DIAGRAM
3.1 OVERALL CONNECTION DIAGRAM
Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".
A

H ( H 1/3, H 2/3, H 3/3 )


DOLBY DIGITAL ASSY
(AWX7042)

FM/AM TUNER MODULE


O (AXQ7219:KUXJI,KCXJI)
(AXQ3112:SDXJI)

K
I R/C AMP ASSY

VOLUME ASSY
(AWZ8504)
E
(AWZ8047)
MOS FET
KM200TA6 KP200TA6L

L ASSY
(AWZ8497)
VIDEO/SR
ASSY J16

C (AWZ8509) J165
DE012CD0 J16

N
AKC-082 REG.2
ASSY
(AWZ8498)

J
CN1993

F R/C SPEAKER ASSY


FRONT INPUT (AWZ8505:KUXJI,KCXJI)
ASSY (AWZ8613:SDXJI)
(AWZ8502)
D
CN1992

8
1 2 3 4
5 6 7 8
VSX-D607S

B
A POWER SWITCH ASSY
(AWZ8501)
FL/U-COM ASSY SDXJI ONLY
(AWZ8043) S1
VOLTAGE
SELECTOR
240V

120–
127V

D 110V

TRANS 220V
ASSY B
(AWZ8496)
FL/U-COM ASSY
C ( C 1/3, C 2/3, C 3/3 ) INPUT
INPUT ASSY ASSY
REK1077
(AWX7148:KUXJI,KCXJI) 1.6A 125V

(AWX7149:SDXJI)
REK1077
1.6A 125V

REK1077
1.6A 125V

POWER
TRANSFORMER
G ATS7161 (KUXJI,KCXJI)
ATS7163 (SDXJI)
REG.1
ASSY
C
(AWZ8507)
REK1085 56
6.3A 125V
(KUXJI,KCXJI) REK1064
REK1064 3.15A 250V
3.15A 250V
(SDXJI) 57
S2
VOLTAGE
55 SELECTOR

M
PRIMARY ASSY AC POWER CORD
(AWZ8865:KUXJI,KCXJI) KUXJI and KCXJI :
INPUT ASSY PDG1015
(AWZ8866:SDXJI) AC120V 60Hz
SDXJI : ADG1157
AC110V/120-127V/220V/240V
50/60HZ
LIVE

NEUTRAL

9
5 6 7 8
1 2 3 4
VSX-D607S

3.2 FL/U-COM AND POWER SWITCH ASSEMBLIES C 1/3 CN409


C 2/3 CN206

B
LCN802
CN9301

C
H 2/3

B POWER(AWZ8501)
SWITCH ASSY

POWER SWITCH ASSY


S981 : DSP MODE
S982 : POWER
S983 : DOLBY PRO LOGIC
S984 : LOUDNESS
S985 : VIDEO
S986 : INPUT MODE
10 A B 1 2 3 4
5 6 7 8
VSX-D607S

: AUDIO SIGNAL ROUTE


A

FL/U-COM ASSY
A (AWZ8043)

CN411
C 1/3
BASS TREBLE
BALANCE

FL/U-COM ASSY
S901 : RESET S914 : FM/AM
S903 : SELECT S915 : MEMORY
S904 : ENTER S916 : MPX
S905 : TAPE2 S918 : DIRECT
S906 : CD S919 : RETURN
S907 : TUNER S920 : SPEAKERS B
S908 : PHONO S921 : SPEAKERS A
S909 : VCR/TAPE1 S922 : MULTI JOG
S910 : DVD/TV VR1901 : BASS ( / )
S911 : LD/SAT VR1902 : TREBLE ( / )
S913 : CLASS VR1903 : BALANCE (L/R)
D

5 6 7
A
8
11
1 2 3 4
VSX-D607S

3.3 INPUT ASSY (1/3)


L CN804 F CN1993 O CN6201
A

(T)
(F-IN)
ADG [J19 (CN207) 5 pin]

(T)

(REC)

VCR OUT

(F-IN)
(P)

(T)
B

(REC)
(P)

FUNCTION SW

INPUT ASSY
C 1/3 (AWX7148:KUXJI,KCXJI)
(AWX7149:SDXJI)

A J10

12 C 1/3
1 2 3 4
5 6 7 8
VSX-D607S

: AUDIO SIGNAL ROUTE


(SL) : AUDIO SIGNAL ROUTE (REAR)
: AUDIO SIGNAL ROUTE (CENTER)
A J14 (C)
(T) : AUDIO SIGNAL ROUTE (TUNER)
A
(P) : AUDIO SIGNAL ROUTE (PHONO)
(REC) : AUDIO SIGNAL ROUTE (REC)
(F-IN) : AUDIO SIGNAL ROUTE (F.IN)

CN9661
H 3/3
(SL)
B

(C)
(SL)

J20
C
(C)

I
(SL)
(SL)

(SL)

(C)
(C)
(C)
D
(C) C 3/3

5 6 7
C 1/3
8
13
1 2 3 4
VSX-D607S

3.4 INPUT (2/3), TRANS AND MOS FET ASSEMBLIES


G J18

H 1/3 CN9801 G J19


A

C216,C217
KUXJI,KCXJI:
ACH7018(8200/71)
SDXJI:
ACH7019(8200/80)
C 3/3

C 2/3
CN1992

(H.P)
J15

(H.P)
F

C 3/3

C 3/3
JJ17
CN51

D
J3
M

14 C 2/3 1
A
2
J9 C 3/3
3
J CN155
K
4
CN502
5 6 7 8
VSX-D607S

N J8
J8

: AUDIO SIGNAL ROUTE


(H.P)
: AUDIO SIGNAL ROUTE (HEADPHONE)
A

C 2/3 INPUT ASSY


(AWX7148:
KUXJI,KCXJI)
(AWX7149:
SDXJI)

D TRANS ASSY
(AWZ8496)

TO POWER TRANS FORMER


C 2/3

C 2/3
C

C 2/3 C 2/3
C 2/3
FET DRIVER

C 3/3
C 2/3
E
MOS FET ASSY D
(AWZ8497)
OUTPUT PEAK DETECTOR

5 6 7
C 2/3 D E 8
15
1 2 3 4
VSX-D607S

3.5 INPUT (3/3), FRONT INPUT AND REG.1 ASSEMBLIES

A
C 3/3 INPUT ASSY
(AWX7148:KUXJI,KCXJI)
(AWX7149:SDXJI)
CN702

B C 1/3
I

REG.1 ASSY
G (AWZ8507) CN210
CN207

C 2/3
C 2/3

16 C 3/3 G 1 2 3 4
5 6 7 8
VSX-D607S
: AUDIO SIGNAL ROUTE
(H.P)
: AUDIO SIGNAL ROUTE (HEADPHONE)
(F-IN)
: AUDIO SIGNAL ROUTE (F.IN)

2SC5242

C 2/3

2SA1962

C 2/3

C 2/3
C 2/3 B

2SA1962
C 2/3

2SC5242

F
FRONT INPUT ASSY
(AWZ8502)
(F-IN)
(F-IN)
CN413
C 1/3

(H.P)
J15
C 2/3

(H.P)

5 6 7
C 3/3 F 8
17
1 2 3 4
VSX-D607S

3.6 DOLBY DIGITAL ASSY (1/3)

H 1/3 DOLBY(AWX7042)
DIGITAL ASSY
H 2/3
TORX176
JA9104 VTL1019
L9108

R9111
100 YF
C9110 C9111
0.1 47/6.3

6.2k

3.9k
B

H 3/3
0

3.9k
JA9000 6.2k
(2/2)
AKB7095

C
JA9000
(1/2)
AKB7095
H 2/3

R9039
0

D R9038
0

18 H 1/3
1 2 3 4
5 6 7 8
VSX-D607S

H 2/3

H 2/3
C

D
C 2/3 CN212

5 6 7
H 1/3
8
19
1 2 3 4
VSX-D607S

3.7 DOLBY DIGITAL ASSY (2/3)

DOLBY DIGITAL ASSY


H 2/3 (AWX7042)

H 1/3
H 3/3

20 H 2/3
1 2 3 4
5 6 7 8
VSX-D607S

H 1/3
H 3/3

R9702
0

A J23

5 6 7
H 2/3
8
21
1 2 3 4
VSX-D607S

3.8 DOLBY DIGITAL ASSY (3/3)


H 3/3
DOLBY DIGITAL ASSY
A (AWX7042)
H 2/3

22 H 3/3
1 2 3 4
5 6 7 8
VSX-D607S

R9604

3.9k
6.8k

3.9k

R9614
6.8k

H 2/3
(SL)
(SL)

R9624
3.9k

18k
(SL)
3.9k

R9634
18k

(SL)

(C)

(C)
(C)

(SW)
3.9k

30k
H 1/3
(SW)

(SL)
(C)

(SW)

(SW)
D

: AUDIO SIGNAL ROUTE C 1/3 CN408


(SL)
: AUDIO SIGNAL ROUTE (REAR)
(C)
: AUDIO SIGNAL ROUTE (CENTER)
(SW)
: AUDIO SIGNAL ROUTE (SW)

5 6 7
H 3/3 8
23
1 2 3 4
VSX-D607S
3.9 VOLUME ASSY

(SW) I VOLUME ASSY (AWZ8047)


(C)
A

(SL)
CN410

(SW)
(SL)

(C)
C 1/3

(SL)
B

(SW)
(C)
LOUDNESS

Q710
DTA143ES
(SW)
(SL)

(C)

Q709
DTA143ES

C 3/3 CN301 K J22


(C)
: AUDIO SIGNAL ROUTE : AUDIO SIGNAL ROUTE (CENTER)
(SL) (SW)
: AUDIO SIGNAL ROUTE (REAR) : AUDIO SIGNAL ROUTE (SW)

24 I
1 2 3 4
1 2 3 4
VSX-D607S

3.10 R/C SPEAKER ASSY

A
R/C SPEAKER ASSY
J (AWZ8505:KUXJI,KCXJI)
(AWZ8613:SDXJI) (C) (C)

(SL) (SL)
J28
C 2/3

(C)

(SL)
J16

(C)

(SW)
K

9k/10k

(C)
SDXJI ONLY
AM/FM
9k/10k
STEP

CHANNEL
STEP
(SW)

C
CN220

(SW)

(SW)
C 2/3

(SL)
: AUDIO SIGNAL ROUTE (REAR)
(C)
: AUDIO SIGNAL ROUTE (CENTER)
(SW)
: AUDIO SIGNAL ROUTE (SW)

1 2 3
J
4
25
1 2 3 4
VSX-D607S

3.11 R/C AMP ASSY

A
R/C AMP ASSY
K (AWZ8504)

(SL) (SL)

(SL)
(SL)
CN703

(C)
I

(SW)

(C)

(C) (C)
(C)
(SW)

(SW) (SW)

26 K 1 2 3 4
5 6 7 8
VSX-D607S

(SL)
: AUDIO SIGNAL ROUTE (REAR)
(C)
: AUDIO SIGNAL ROUTE (CENTER)
(SW)
: AUDIO SIGNAL ROUTE (SW)

2SC5242 OUTPUT DETECTOR

(SL)

(SL) (SL)

2SA1962

J4
C 2/3
B

2SA1962 (SL)

DC DETECTOR
(SL)

CN153
2SC5242

(C)

(SW)

J
(C) (SW)

2SC5242 C

(C)

(C)

2SA1962

(SW) (SW)

5 6 7
K8
27
1 2 3 4
VSX-D607S

3.12 VIDEO/SR ASSY


A J13
(V)
A : VIDEO SIGNAL ROUTE
(V.REC)
: VIDEO REC SIGNAL ROUTE

VIDEO/SR ASSY
L (AWZ8509)

(V)

(V.REC)

(V)

C (V)

(V)

MUTE
(V)

(V)

(V)

C 1/3 J5

28 L
1 2 3 4
1 2 3 4
VSX-D607S

3.13 PRIMARY AND REG.2 ASSEMBLIES


REG.2 ASSY
N (AWZ8498) A

POWER
TRANSFORMER
ATS7161 (KUXJI,KCXJI)
ATS7163 (SDXJI)

SDXJI ONLY
YEL
S1 : AKX-507
WHT VOLTAGE
GRY SELECTOR

BLU
D RED
240V

120–
BLK 127V

BRN 110V
C 2/3 J8

YEL
220V

FU1 : REK1085 6.3A 125V


(KUXJI,KCXJI)
REK1064 3.15A 250V
(SDXJI)

PRIMARY ASSY
M (AWZ8865 : KUXJI,KCXJI)
(AWZ8866 : SDXJI)

0.022/400V
53

SWITCHED
C55 100W MAX
KUXJI,KCXJI:
ACG7020(0.01/250)
SDXJI:
ACG1030(0.022/400)
FU2 REK1064 56
(3.15A 250V) AKC-082

C 2/3 C
J3 57
AKC-082
S2
AKX1004
KUXJI,KCXJI RED
ONLY BLU

BLK
VOLTAGE
SELECTOR

POWER 55
AKC-082
TRANSFORMER

LIVE

R55 NEUTRAL
ATT7018 (KUXJI,KCXJI)
ATT1193 (SDXJI) 2.2M
ACN-208 AC POWER CORD
54 KUXJI,KCXJI PDG1015
VNF-091 ONLY AC120V 60Hz
(KUXJI,KCXJI)
ADG1157
AC110V,120-127V,
220V,240V
50/60Hz D
(SDXJI)

1 2 3
M N 4
29
1 2 3 4
VSX-D607S

3.14 FM/AM TUNER MODULE

A FM/AM TUNER MODULE


O (AXQ7219:KUXJI,KCXJI)
(AXQ3112:SDXJI)

B
KUXJI,KCXJI:AKE7028
SDXJI:AKA1016
BN6201

AM RF TUNING BLOCK
AXX1025

30 O
1 2 3 4
5 6 7 8
VSX-D607S

C6230,C6232
KUXJI,KCXJI:0.039
SDXJI:0.033

CN407
C 1/3
C

F6202
KUXJI,KCXJI:ATF1156
SDXJI:ATF1155

5 6 7
O
8
31
1 2 3 4
VSX-D607S

4. PCB CONNECTION DIAGRAM


4.1 FL/U-COM AND POWER SWITCH ASSEMBLIES
A
A FL/U-COM ASSY L CN802

C
CN206

H
CN9301

C
CN411

VR1901 VR1902 VR1903


Q901 Q906 IC1901 Q903 IC901 Q907
Q902 Q905 IC1902 IC902
C

B POWER SWITCH ASSY

32 A B
1 2 3 4
5 6 7 8
VSX-D607S

C CN409 A

SIDE A

(ANP7175-B)

Q907 Q904 Q952 Q951


IC902 IC951
Q953 C

NOTE FOR PCB DIAGRAMS :


1. Part numbers in PCB diagrams match those in the schematic 3. The parts mounted on this PCB include all necessary parts for
diagrams. several destinations.
2. A comparison between the main parts of PCB and schematic For further information for respective destinations, be sure to
diagrams is shown below. check with the schematic diagram.
Symbol In PCB Symbol In Schematic 4. View point of PCB diagrams.
Part Name
Diagrams Diagrams
B C E B C E
Connector Capacitor
Transistor
B C E

B C E B C E SIDE A
Transistor
B C E with resistor

D G S D G S
Field effect
D G S transistor
P.C.Board Chip Part SIDE B D

Resistor array

3-terminal
regulator

5 6 7
A8
33
1 2 3 4
VSX-D607S

4.2 INPUT ASSY I J20 G J19

A
C INPUT ASSY

I
CN702

A
J14

B
A
J10

O
CN6201

F
CN1993
C

34 C1 2 3 4
5 6 7 8
VSX-D607S

G J19 A J9
(ANP7173-C) Q2 Q3
Q4 Q1

Q308 A
Q316 Q315
D J2 Q310 Q309
Q322
Q306 Q313
Q312 Q311
Q314 Q307
Q304 Q398
Q397
Q302 Q321
IC204

Q206
Q301 Q205
N J8 Q305
IC201
Q303

G J18 IC409

M
CN51 B
Q407
Q405
H
CN9801 IC407
IC408
IC404

Q408

Q406
IC405
IC406
D J1
Q411
K Q410

CN502
Q412
E C

CN395

Q409
IC203
IC403 Q208
J J17 IC401 Q210

IC202
Q401
Q207
IC402
Q402
Q203
Q404
Q403

Q201
D
Q202
Q211

L CN804 H CN9661 SIDE A J CN155 F CN1992


5 6 7
C8
35
1 2 3 4
VSX-D607S

4.3 TRANS, MOS FET, FRONT INPUT AND REG.1 ASSEMBLIES


A

D TRANS ASSY G REG.1 ASSY


C
J2
TRANSFORMER

C (ANP7175-B)
POWER

J1
B C CN207 C CN210

(ANP7173-C)

C E MOS FET ASSY F FRONT INPUT ASSY


C
J6

C
CN413
(ANP7173-C)

(ANP7175-B)

C J15
D

SIDE A

36 D E F G
1 2 3 4
1 2 3 4
VSX-D607S

4.4 VOLUME AND R/C SPEAKER ASSEMBLIES


A
I VOLUME ASSY
C
CN410
IC702
Q701
Q702

K
IC703
J22 Q703

B
Q704

Q705
VR701 Q709
IC701
Q710
Q706

Q707
Q708

(ANP7174-D)

C CN301

J R/C SPEAKER ASSY

C
CN220

(ANP7175-B)

K J16 C J28
SIDE A

1 2 3
I J 4
37
1 2 3 4
VSX-D607S

4.5 DOLBY DIGITAL ASSY


• This diagram has four layers. In the two middle layers, mainly Vcc and GND are connected.

A
H DOLBY DIGITAL ASSY
A
A
J23

C
CN212

C
CN408

(ANP7183-D)

D
Q9462 Q9431 Q9401 IC9461 IC9371 IC9361
Q9461 Q9402 IC9251 IC9431 IC9121 IC9301
Q9221 Q9201 IC9401 IC9071 IC9381
Q9432 IC9103 IC9091

SIDE A
38 H 1 2 3 4
1 2 3 4
VSX-D607S

• This diagram has four layers. In the two middle layers, mainly Vcc and GND are connected.

HHDOLBY DIGITAL ASSY


A

(ANP7183-D)

Q9302 Q9304 IC9471 IC9441 IC9501 IC9621 IC9641


Q9303 Q9002 IC9041 IC9411 IC9601 Q9621 Q9651 D
Q9032 Q9006 Q9251 Q9601 IC9221 Q9641
Q9031 Q9301 Q9242 Q9611 IC9201 Q9631
Q9005 Q9241 Q9003
Q9004

SIDE B

1 2 3
H
4
39
1 2 3 4
VSX-D607S
4.6 R/C AMP ASSY
K R/C AMP
ASSY Q603
A
Q605 Q619
Q607 Q609

Q5

Q611 Q615

Q601 Q617

I Q7
Q602
CN703

Q613
B Q620
Q612
Q614

Q604
Q606 Q618
Q8
Q608

Q610

Q616

Q501 Q6

C
J
CN153

Q505 Q513

Q507 Q503

Q509
Q9

Q515

Q511

Q517

D
Q10
Q519

SIDE A C
J4
40 K1
(ANP7175-B)
2 3 4
1 2 3 4
VSX-D607S

4.7 VIDEO/SR, PRIMARY AND REG.2 ASSEMBLIES


L
VIDEO/SR A

ASSY

A J13

B
J5 C

(ANP7174-D)

Q1851 Q853 Q852 Q1898 IC851 Q851 Q802 Q801


Q1852 Q854 Q1853 IC1851 Q1801
Q1899 IC1853 Q855

AC POWER CORD
M PRIMARY ASSY LIVE NEUTRAL

POWER
C
TRANSFORMER
S1
VOLTAGE
SELECTOR

S2 N REG.2 ASSY
VOLTAGE
SELECTOR

J3 C
D

(ANP7173-C)

(ANP7174-D) C J8
SIDE A

1 2 3
L M N 4
41
1 2 3 4
VSX-D607S

4.8 FM/AM TUNER MODULE

O FM/AM TUNER MODULE


A

(ANP1729-B)

SIDE A
42 O
1 2 3 4
1 2 3 4
VSX-D607S

O FM/AM TUNER MODULE


A

(ANP1729-B)

SIDE B

1 2 3
O
4
43
VSX-D607S

Mark No. Description Part No. Mark No. Description Part No.

5. PCB PARTS LIST


NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
• The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω → 56 × 101 → 561 ........................................................ RD1/4PU 5 6 1 J
47k Ω → 47 × 103 → 473 ........................................................ RD1/4PU 4 7 3 J
0.5 Ω → R50 ..................................................................................... RN2H R 5 0 K
1Ω → 1R0 ..................................................................................... RS1P 1 R 0 K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω → 562 × 101 → 5621 ...................................................... RN1/4PC 5 6 2 1 F

LIST OF WHOLE PCB ASSEMBLIES


Part No.
Mark Symbol and Description VSX-D607S VSX-D607S VSX-D607S Remarks
/KUXJI /KCXJI /SDXJI
NSP MOTHER ASSY AWK7451 AWK7451 AWK7452
INPUT ASSY AWX7148 AWX7148 AWX7149
TRANS ASSY AWZ8496 AWZ8496 AWZ8496
NSP MOS FET ASSY AWZ8497 AWZ8497 AWZ8497
REG.2 ASSY AWZ8498 AWZ8498 AWZ8498

NSP FRONT & R/C AMP ASSY AWK7443 AWK7443 AWK7445


FL/U-COM ASSY AWZ8043 AWZ8043 AWZ8043
NSP POWER SWITCH ASSY AWZ8501 AWZ8501 AWZ8501
NSP FRONT INPUT ASSY AWZ8502 AWZ8502 AWZ8502
R/C AMP ASSY AWZ8504 AWZ8504 AWZ8504
R/C SPEAKER ASSY AWZ8505 AWZ8505 AWZ8613
REG.1 ASSY AWZ8507 AWZ8507 AWZ8507

NSP COMPLEX ASSY AWK7454 AWK7454 AWK7455


VOLUME ASSY AWZ8047 AWZ8047 AWZ8047
VIDEO/SR ASSY AWZ8509 AWZ8509 AWZ8509
NSP PRIMARY ASSY AWZ8865 AWZ8865 AWZ8866

DOLBY DIGITAL ASSY AWX7042 AWX7042 AWX7042


FM/AM TUNER MODULE AXQ7219 AXQ7219 AXQ3112

Mark No. Description Part No. Mark No. Description Part No.

A FL/U-COM ASSY CAPACITORS


C902 (0.22F) ACH7058
SEMICONDUCTORS C932,C933 CCPUSL220J50
IC1902 NJM4558D-D C1911,C1912,C1915-C1918 CEAS100M50
IC901 PDG213A C911 CEAS101M25
IC1901 UPC4570C C903 CEAS221M10
Q904 2SA933S
Q905,Q906 2SC1740S C1921,C1922,C907,C909 CEAS2R2M50
C940 CEAS470M16
Q901,Q903 KRC101M C913 CEAS470M25
Q902 KRC103M C912 CEAS470M50
D901-D912,D914-D918 1SS252 C1907,C1908 CFTXA123J50
D923,D924 1SS252
C1905,C1906 CFTXA274J50
COIL C1903,C1904 CFTXA473J50
C1909,C1910 CFTXA563J50
L901 LAU2R2J
C1919,C1920 CGCYX103M16
C908 CGCYX104M16
SWITCHES
S901,S903-S911,S913-S916 ASG1034 C914 CKCYF103Z50
S918-S921 ASG1034 C917,C931,C934-C939 CKPUYB101K50
S922 ASX7001 C941,C942 CKPUYB101K50
C919 CKPUYB102K50
C943,C944 CKPUYF103Z25

44
VSX-D607S

Mark No. Description Part No. Mark No. Description Part No.
C905,C906 CKPUYF473Z16 Q210,Q303-Q306 2SA992
C901,C904,C918,C945,C965 CKPUYY103M16 Q205,Q206,Q397,Q398 2SC1740S
C910 CKPYF103Z50 Q401,Q402 2SC1740S
Q208 2SC1845
Q315,Q316 2SC2240
RESISTORS
R919 RA8T103J Q207,Q301,Q302 2SC2878
VR1903 (500kΩ) ACS1016 Q309,Q310 2SC3334
VR1901,VR1902 (30kΩ) ACS7020 Q311,Q312 2SC4793
Other Resistors RD1/4PU J Q201-Q203,Q211 KRC101M
D201-D203,D224,D230-D233 1SS252
OTHERS
X901 CERAMIC RESONATOR ASS1055 D301-D304,D313-D316 1SS252
(7.70MHz) D324-D327,D403-D408 1SS252
906 7P CABLE HOLDER 51063-0705 D212,D213 D5SBA20
903 10P CABLE HOLDER 51063-1005 D209,D210 MTZJ18B
907 11P CABLE HOLDER 51063-1105 D401,D402 MTZJ5.1B

904 12P CABLE HOLDER 51063-1205 D222 MTZJ5.1C


902,908 15P CABLE HOLDER 51063-1505 D205,D206 MTZJ6.2B
V901 FL TUBE AAV7034 D214-D221 S5688G
901 REMOTE RECEIVER GP1U28X
UNIT COILS
L301,L302 AF CHOKE COIL ATH1004
L410,L411 LAU220J

B POWER SWITCH ASSY SWITCH AND RELAYS


S201 ASH1027
SEMICONDUCTOR RY201-RY204 ASR7001
D981 AEL1065

CAPACITORS
SWITCHES C227,C228 (0.01µF/AC250V) ACG1005
S981-S986 ASG1034 C216,C217 (8200µF/71V) ACH7018
C307,C308 CCCSL100D2H
RESISTORS C446-C448,C455-C463 CCCSL101J50
All Resistors RD1/4PU J C317-C320 CCCSL101K2H

C303,C304 CCCSL151J50
OTHERS C315,C316 CCCSL5R0C2H
CN981 7P JAMPER CONNECTOR KPE7 C321,C322 CEANP2R2M50
C211,C212 CEAS100M25
C417,C418 CEAS100M50

C226,C311,C312 CEAS101M10
C INPUT ASSY C313,C314,C423,C424
C218,C219
CEAS101M25
CEAS101M2A
(1) CONTRAST TABLE C222 CEAS102M35
AWX7148 and AWX7149 are constructed the same except C214,C215,C445 CEAS1R0M50
for the following:
C209 CEAS221M10
Symbol and Part No.
Mark Remarks C301,C302,C437,C438 CEAS2R2M50
Description AWX7148 AWX7149 C443,C444 CEAS2R2M50
C216,C217 ACH7018 ACH7019 C220 CEAS332M16
(8200µF/71V) (8200µF/80V) C223 CEAS470M16
C495 CGCYX104M12 CGCYX104M16
C224,C435,C436,C439,C440 CEAS470M25
(2) PARTS LIST FOR AWX7148 C464 CEAS470M25
C335,C336 CEAS4R7M2A
SEMICONDUCTORS C229,C431,C432,C465-C468 CEAS4R7M50
IC202,IC203,IC403,IC407,IC408 NJM4558D-D C471-C474,C479,C480 CEAS4R7M50
IC409 NJM4558LD
IC201 NJM78M56FA C489,C490 CEAS4R7M50
IC404 TC9162AN C323,C324 CFTXA473J50
IC402 TC9273N-007 C491 CGCYX103M16
C495 CGCYX104M12
IC405,IC406 TC9299P C429,C430,C433,C434 CGCYX473M25
IC401 UPC4570C
Q307,Q308 2SA1321 C441,C442,C449-C454 CGCYX473M25
Q313,Q314 2SA1837 C469,C470,C475,C476,C487 CGCYX473M25
Q321,Q322 2SA970 C305,C306 CKCYB102K2H
C210 CKCYB102K50
C225,C485,C486 CKCYF103Z50

45
VSX-D607S

Mark No. Description Part No. Mark No. Description Part No.
C427,C428 CQMA242J50
C425,C426 CQMA822J50
OTHERS
C221 (4700µF/35V) RCH1107 292 8P CABLE HOLDER 51052-0800
291 11P CABLE HOLDER 51052-1100
H291-H296 FUSE CLIP AKR1004
RESISTORS
R343,R344 (0.33Ω/5W) ACN7001
R226 (27Ω/5W) ACN7022
R319,R320 RD1/4LMF680J
R315,R316
R313,R314
RD1/4PM104J
RD1/4PM362J
E MOS FET ASSY
SEMICONDUCTORS
R353,R354 RD1/4PMF100J Q395 IRF540A
R327-R334 RD1/4PMF101J Q396 IRF9540A
R345,R346 RD1/4PMF472J
R321,R322 RF1/4PS101J RESISTORS
R337-R340 RF1/4PS4R7J R391,R392 RD1/4PMF101J
Other Resistors RD1/4PM J
R335,R336,R341,R342 RF1/4PS8R2J
R355,R356 RS1LMF100J
R460 RS1PMF181J OTHERS
R213,R214 RS1PMF271J CN395 11P JAMPER CONNECTOR KPD10
R225 RS3LMF560J

Other Resistors RD1/4PU J

OTHERS F FRONT INPUT ASSY


202 3P CABLE HOLDER 51052-0300 CAPACITORS
218 4P CABLE HOLDER 51052-0400 C1984-C1986 CGCYX473M16
211 7P CABLE HOLDER 51052-0700
215 8P CABLE HOLDER 51052-0800
205,213 10P CABLE HOLDER 51052-1000
RESISTORS
R1991,R1992 RS2LMF331J
216 11P CABLE HOLDER 51052-1100 Other Resistors RD1/4PU J
214,412 4P CABLE HOLDER 51063-0405
402,403 4P PIN JACK AKB7014 OTHERS
CN401,CN404 4P PIN JACK AKB7015 CN1981 3P PIN JACK AKB7085
CN201 8P SPEAKER TERMINAL AKE7006 CN1991 HEADPHONE JACK AKN7001
CN1993 5P PLUG KM250MA5
J402 JAMPER WIRE DB022ND0 CN1992 3P JAMPER CONNECTOR KPD3
J404 JAMPER WIRE DB832ND2
CN407 14P PLUG KM200IA14
CN212 11P PLUG KM200TA11
CN408 15P PLUG KM200TA15

CN301 6P PLUG KM200TA6


G REG.1 ASSY
CN413 5P PLUG KM250MA5 SEMICONDUCTORS
CN220 4P JAMPER CONNECTOR KPD4 IC103 NJM78M05FA
CN210 6P JAMPER CONNECTOR KPD6 IC101 NJM78M15FA
CN207 7P JAMPER CONNECTOR KPD7 IC102 NJM79M15FA
IC104 PQ20RV1E
CN411 11P JAMPER CONNECTOR KPE11 D101 1SS252
CN206,CN409,CN410 KPE15
15P JAMPER CONNECTOR
227 EARTH METAL VNF-091
CAPACITORS
C107 CEAS101M10
C105,C106 CEAS101M16
C108 CEAS470M10
C104 CEHAQ470M25
D TRANS ASSY C101-C103 CKCYF103Z50

SEMICONDUCTORS
D291,D292 S5688G
RESISTORS
R103 RN1/4PC1471F
R102 RN1/4PC8200F
CAPACITOR R101 RS3LMF8R2J
C295 CEAS470M50
OTHERS
RESISTORS 101 6P CABLE HOLDER 51052-0600
All Resistors RD1/4PU J 102 7P CABLE HOLDER 51052-0700

46
VSX-D607S

Mark No. Description Part No. Mark No. Description Part No.
C9257 CEAS471M6R3
H DOLBY DIGITAL ASSY C9107,C9128,C9201,C9221,C9403
C9405,C9408,C9433,C9435,C9438
CEV100M16
CEV100M16
SEMICONDUCTORS C9463,C9465,C9468,C9502,C9504 CEV100M16
IC9401,IC9431,IC9461 AK4319-VM C9602,C9605,C9612,C9615,C9622 CEV100M16
IC9251 AK5340-VS
IC9121 CD0004AF C9625,C9632,C9635,C9642,C9645 CEV100M16
IC9361 KM62V256CLG-7L C9652,C9655 CEV100M16
IC9301 MB86342A C9262 CEV101M6R3
C9415,C9425,C9445,C9455,C9475 CEV220M16
IC9201,IC9221 NJM2100M C9485 CEV220M16
IC9411,IC9441,IC9471,IC9601,IC9621 NJM4558MD
IC9641 NJM4558MD C9241 CEV221M4
IC9501 PA4025A C9801,C9802 CEV330M25
IC9371 TC74HCT244AF C9111,C9242,C9363,C9373,C9383 CEV470M6R3
C9371 CKSQYB102K50
IC9103 TC74HCU04AF C9101,C9103,C9153,C9154,C9701 CKSQYB103K50
IC9381 TC74LVX244FS
Q9241,Q9401,Q9431,Q9461 2PB709A C9703,C9706,C9707 CKSQYB103K50
Q9242,Q9402,Q9432,Q9462 2PD601A C9121,C9581 CKSQYB104K25
Q9201,Q9221,Q9601,Q9611,Q9621 2SC3326 C9205,C9225 CKSQYB152K50
C9483,C9484 CKSQYB153K50
Q9631,Q9641,Q9651 2SC3326 C9582 CKSQYB273K50
Q9304 PDTA124EK
Q9251,Q9301-Q9303 PDTC124EK C9653 CKSQYB393K50
D9401,D9431 1SS181 C9106,C9110,C9123,C9127,C9202 CKSQYF104Z25
C9204,C9222,C9224,C9251,C9253 CKSQYF104Z25
C9256,C9259,C9303,C9310,C9313 CKSQYF104Z25
COILS AND FILTERS C9316,C9319,C9322,C9324,C9362 CKSQYF104Z25
F9301,F9302,F9371 ATF7013
CHIP EMI FILTER C9372,C9382,C9402,C9404,C9407 CKSQYF104Z25
L9301,L9801-L9811 ATL7001 C9409,C9411,C9421,C9432,C9434 CKSQYF104Z25
CHIP SOLID INDUCTOR C9437,C9439,C9441,C9451,C9462 CKSQYF104Z25
L9200,L9201,L9221,L9252-L9254 ATX1026 C9464,C9467,C9469,C9471,C9481 CKSQYF104Z25
C9501,C9503,C9601,C9611,C9621 CKSQYF104Z25
L9402,L9432,L9462,L9601,L9611 ATX1026
L9621,L9631,L9641,L9651 ATX1026 C9631,C9641,C9651 CKSQYF104Z25
CHIP SOLID INDUCTOR
L9302 CHIP COIL LCTBR47K2125
L9103,L9108,L9121,L9251,L9361 VTL1019
RESISTORS
All Resistors RS1/10S J
L9371,L9380,L9401,L9431,L9461 VTL1019
L9661 CHIP SOLID INDUCTOR VTL1019 OTHERS
X9301 CRYSTAL RESONATOR ASS1035
CAPACITORS (18.432MHz)
C9105,C9122,C9126,C9159,C9160 CCSQCH101J50 JA9000 2P PIN JACK AKB7095
C9255,C9263,C9302,C9309,C9312 CCSQCH101J50 PC BOARD DOLBY DIGITAL ANP7183
C9315,C9318,C9321,C9361,C9381 CCSQCH101J50 CN9801 11P SOCKET KP200TA11L
C9401,C9406,C9431,C9436,C9461 CCSQCH101J50
C9466 CCSQCH101J50 CN9661 15P SOCKET KP200TA15L
CN9301 10P JAMPER CONNECTOR KPE10
C9511,C9521,C9541,C9551,C9571 CCSQCH102J50 JA9104 OPTICAL RECEIVER TORX176
C9606,C9616,C9626,C9636,C9646 CCSQCH102J50
C9656 CCSQCH102J50
C9413,C9414,C9423,C9424 CCSQCH151J50
C9443,C9444,C9453,C9454 CCSQCH151J50
I VOLUME ASSY
C9473,C9474 CCSQCH151J50 SEMICONDUCTORS
C9125,C9203,C9223,C9305,C9306 CCSQCH220J50 IC701-IC703 UPC4570C
C9412,C9422,C9442,C9452,C9472 CCSQCH221J50 Q705,Q706 2SA1115
C9482 CCSQCH221J50 Q707,Q708 2SC2603
C9151,C9152,C9512,C9522,C9542 CCSQCH271J50 Q703,Q704 2SK246
Q709,Q710 DTA143ES
C9552,C9572,C9702,C9704 CCSQCH271J50
C9603,C9613,C9623,C9633,C9643 CCSQCH391J50 Q702 KRA103M
C9326,C9392 CCSQCH471J50 Q701 KRC103M
C9307,C9308,C9375 CCSQCH560J50 D701,D703,D705 1SS252
C9301 CEAS102M6R3

47
VSX-D607S

Mark No. Description Part No. Mark No. Description Part No.
CAPACITORS
C720,C721 CCCSL271J50 K R/C AMP ASSY
C703,C704 CCPUSL560J50 SEMICONDUCTORS
C719 CEANP100M50
Q509,Q609,Q610 2SA1321
C722 CEAS220M50
Q517,Q617,Q618 2SA1837
C701,C702,C705-C708 CEAS4R7M50
Q503,Q603,Q604 2SA970
Q505,Q507,Q605-Q608 2SA992
C711-C714,C717,C718 CEAS4R7M50
Q513,Q613,Q614 2SC1740S
C729,C730 CFTXA473J50
C723-C728 CGCYX104M25
Q519,Q619,Q620 2SC2240
C709,C710 CKPUYB181K50
Q501,Q601,Q602 2SC2878
C715 CKPUYB681K50
Q511,Q611,Q612 2SC3334
Q515,Q615,Q616 2SC4793
C716 CKPUYB820K50
D501,D503,D513,D515,D517 1SS252

RESISTORS D519,D601-D604,D613-D620 1SS252


VR701 (100kΩ) ACX7028
Other Resistors RD1/4PU J CAPACITORS
C517,C519,C617-C620 CCCSL101K2H
OTHERS C507,C607,C608 CCCSL120K2H
701 15P CABLE HOLDER 51063-1505 C503,C603,C604 CCCSL151J50
CN702 6P SOCKET KP200TA6L C515,C615,C616 CCCSL5R0C2H
CN703 9P JAMPER CONNECTOR KPE9 C521,C621,C622 CEANP2R2M50

C511,C611,C612 CEAS101M10
C513,C613,C614 CEAS101M25
C501,C601,C602 CEAS2R2M50
J R/C SPEAKER ASSY C505,C605,C606 CKCYB102K2H
(1) CONTRAST TABLE
AWZ8505 and AWZ8613 are constructed the same except
RESISTORS
for the following: R545,R645,R646 (0.33Ω/5W) ACN7001
R521,R621,R622 RD1/4LMF680J
Symbol and Part No. R517,R617,R618 RD1/4PM104J
Mark Remarks R529,R531,R533,R535 RD1/4PMF101J
Description AWZ8505 AW8613
R629-R636 RD1/4PMF101J
S151 Not used ASH1027
R547,R647,R648 RD1/4PMF472J
(2) PARTS LIST FOR AWZ8505 R523,R623,R624 RF1/4PS101J
R539,R541,R639-R642 RF1/4PS4R7J
SEMICONDUCTORS R537,R543,R637,R638 RF1/4PS8R2J
Q151 2SC1740S R643,R644 RF1/4PS8R2J
Q163 2SC2878
D151,D152 1SS252 Other Resistors RD1/4PU J

COILS OTHERS
L154-L156 AF CHOKE COIL ATH1004 503 6P CABLE HOLDER 51052-0600
501 9P CABLE HOLDER 51063-0905
RELAYS CN502 10P JAMPER CONNECTOR KPD10
RY151,RY152 ASR7001

CAPACITORS
C161,C163,C165 CFTXA473J50 L VIDEO/SR ASSY
SEMICONDUCTORS
RESISTORS IC851 LA7952
R183-R185 RD1/4PMF100J Q801,Q855 2SA933S
R186-R188 RS1LMF100J Q1898,Q1899,Q851-Q854 2SC1740S
Other Resistors RD1/4PU J Q802 KRC103M
D801,D802,D851-D853 1SS252
OTHERS
154 4P CABLE HOLDER 51052-0400 CAPACITORS
CN152 2P PIN JACK AKB7001 C1853 CEANP4R7M50
CN151 6P SPEAKER TERMINAL AKE7041 C857,C858,C860 CEAS470M25
CN155 4P JAMPER CONNECTOR KPD4 C854,C856 CEAS471M6R3
CN153 6P JAMPER CONNECTOR KPD6 C851-C853,C864 CEAS4R7M50
C863 CKCYB102K50

C801 CKCYF103Z50

48
VSX-D607S

Mark No. Description Part No. Mark No. Description Part No.
RESISTORS
R860,R861 RD1/4PM331J N REG.2 ASSY
Other Resistors RD1/4PU J SEMICONDUCTORS
IC282 NJM78M05FA
OTHERS IC281 NJM78M12FA
801 2P PIN JACK AKB7016
802 3P PIN JACK AKB7018 CAPACITORS
CN804 4P JAMPER CONNECTOR KPE4
C282 CEAS101M10
CN802 7P JAMPER CONNECTOR KPE7
C281 CEAS101M16
JA803,JA807 RKN1004
C284 CEHAQ470M50
REMOTE CONTROL JACK
C283 CGCYX103M25

RESISTOR
M PRIMARY ASSY R228 RS2LMF331J

(1) CONTRAST TABLE OTHERS


AWZ8865 and AWZ8866 are constructed the same except 281 7P CABLE HOLDER 51052-0700
for the following:

Symbol and Part No.


Mark Remarks

T51
Description AWZ8865
ATT7018
AW8866
ATT1193
O FM/AM TUNER MODULE
C55 ACG7020 ACG1030 (1) CONTRAST TABLE
(0.01µF/AC250V) (0.022µF/AC400V) AXQ7219 and AXQ3112 are constructed the same except for
C56 Not used ACG1030
(0.022µF/AC400V)
the following:

R55 (2.2MΩ) ACN-208 Not used Symbol and Part No.


Mark Remarks
H53,H54 FUSE CLIP Not used AKR1004 Description AXQ7219 AXQ3112
54 EARTH METAL VNF-091 Not used
F6202 ATF1156 ATF1155
AM CERAMIC FILTER
C6230 CKSQYB393K50 CKSQYB333K50
(2) PARTS LIST FOR AWZ8865 C6232 CKSYB393K50 CKSYB333K50
SEMICONDUCTORS BN6201 AKE7028 AKA1016
4P ANTENNA TERMINAL
IC51 NJM78M56FA
Q51 KRC101M
D54,D55 1SS252 (2) PARTS LIST FOR AXQ7219
D53 MTZJ5.1A SEMICONDUCTORS
D51 S5688G
IC6201 LA1836M
IC6202 LM7001J
COIL Q6102 2SC2223
L52 LINE FILTER ATF1006 Q6203 2SC2235
Q6202 2SC2712
TRANSFORMER Q6103,Q6214 2SC2714
T51 ATT7018 Q6201 2SK208
Q6104 2SK302
RELAY Q6101 3SK194
Q6204 XDA124EK
RY51 ASR1044
Q6217 XDC124EK
CAPACITORS D6101,D6102 1T33
C54,C55 (0.01µF/AC250V) ACG7020
C53 CEAS470M16 COILS AND FILTERS
C52 CEAS471M16
L6104 FM COIL ATC1003
C51 CGCYX103M25
L6101 FM RF COIL ATC1020
L6102 FM RF COIL ATC1021
RESISTORS L6207 FM COIL ATE1013
R55 (2.2MΩ) ACN-208 F6203,F6204 FM CERAMIC FILTER ATF-119
R54 RD1/2PM270J
Other Resistors RD1/4PU J F6101 FM BAND PASS FILTER ATF-155
F6202 AM CERAMIC FILTER ATF1156
L6103 CHIP COIL ATH1043
OTHERS L6202,L6203,L6208 CHIP COIL LCTA2R2J3225
53 1P AC OUTLET AKP1060
H51,H52 FUSE CLIP AKR1004
CN51 4P JAMPER CONNECTOR KPE4 TRANSFORMER
54 EARTH METAL VNF-091 T6101 ATE-063

49
VSX-D607S

Mark No. Description Part No. Mark No. Description Part No.
CAPACITORS
C6202,C6234,C6236 (1µF/16V) ACG1051
C6229 CCSCH821J50
C6107 CCSCK1R0C50
C6108,C6203,C6268 CCSQCH101J50
C6111,C6116,C6208,C6221,C6222 CCSQCH150J50

C6115 CCSQCH330J50
C6101 CCSQCH5R0C50
C6110 CCSQCK2R0C50
C6114 CCSQRH080D50
C6113 CCSQRH180J50

C6105 CCSQTH150J50
C6224,C6246,C6262 CEAS100M50
C6227 CEAS101M10
C6261 CEAS1R0M50
C6216,C6217 CEAS330M16

C6231,C6233 CEAS3R3M50
C6219 CEAS470M10
C6243-C6245 CEAS470M16
C6238 CEJA100M16
C6249,C6250 CEJA4R7M35

C6215 CFTXA103J50
C6214 CFTXA224J50
C6103,C6106,C6112,C6204 CKSQYB102K50
C6102,C6109,C6117,C6210,C6264 CKSQYB103K50
C6213 CKSQYB223K50

C6230 CKSQYB393K50
C6228,C6252 CKSQYB472K50
C6209,C6237,C6265,C6267 CKSQYB473K50
C6212,C6218 CKSQYF103Z50
C6220,C6226,C6239,C6242,C6255 CKSQYF223Z50

C6235 CKSQYF224Z25
C6225,C6241,C6266 CKSQYF473Z50
C6232 CKSYB393K50
C6251 CKSYB472K50
C6223 CKSYF103Z50

C6263 CKSYF473Z50

RESISTORS
R6299,R6300 RD1/4PU102J
R6113,R6116,R6118,R6268-R6271 RS1/8S0R0J
R6275,R6276,R6278,R6283,R6284 RS1/8S0R0J
R6290,R6293,R6294,R6297 RS1/8S0R0J
R6243,R6244 RS1/8S101J

R6211 RS1/8S103J
R6237 RS1/8S182J
R6209 RS1/8S221J
R6239 RS1/8S332J
R6101 RS1/8S470J

VR6201 (10kΩ) ACP1056


VR6202 VRTB6VS223
Other Resistors RS1/10S J

OTHERS
X6203 CRYSTAL RESONATOR ASS1042
(7.2MHz)
X6201 CERAMIC RESONATOR ASS1066
(456kHz)
X6202 CERAMIC RESONATOR ATF1027
(450kHz)

BN6201 4P ANTENNA TERMINAL AKE7028


CN6201 14P SOCKET KP200IA14L
AM RF TUNING BLOCK AXX1025

50
VSX-D607S

6. ADJUSTMENT
6.1 TUNER ADJUSTMENT
ADJUSTMENT OF FM TUNER SECTION
• Set the FM/AM selector to FM BAND.
• Connect the wiring as shown in Fig. 6–1.
FM SG (1kHz, ± 75kHz dev.) Reception
Step Adjustment Adjustment
Frequency Level Frequency Specifications
No. Title Location
(MHz) (dBµV) Display
Adjust so that the DC voltage between IC6201-pin
98
1 Center Adjustment 80 or more − L6207 4 and pin 28 (or leads of C6224 and C6261)
Non modulation
becomes 0V ± 50mV.
Front End Adjust so that the DC voltage between IC6201-pin
Low input L6102
2 Sensitivity 98 98MHz 12 and GND (or leads of C6238 and GND)
(0 to 30) T6101
Adjustment becomes at maximum level.
3 Stereo Distortion 98 80 98MHz T6101 Minimize the distortion with 1/8 rotation of the core.
TUNED IND. Adjust so that the indicator of TUNED IND. starts
4 98 15 (± 2dB) 98MHz VR6201
Lighting Level to light up.
Notes:
• Before adjusting, make sure there is no gap between L6101 and L6102 . If there is a gap between them, bring them into contact with each other
first, and then make adjustments.
• Make indicator adjustments in order of AM→FM.

ADJUSTMENT OF AM TUNER SECTION


• Set the FM/AM selector to AM BAND.
• Connect the wiring as shown in Fig. 6–1.
AM SG (400Hz, ± 30% Mod.) Reception
Step Adjustment Adjustment
Frequency Level Frequency Specifications
No. Title Location
(kHz) (dBµV/m) Display
TUNED IND. Adjust so that the indicator of TUNED IND. starts
1 999 ∗1 47 (± 2dB) 999kHz ∗1 VR6202
Lighting Level to light up.
∗1 : For the area using 10kHz step, frequencies should be 1000kHz.

51
VSX-D607S

60cm

Loop antenna

AM SG Center AM antenna terminal


Center

PRODUCT DC
MPX SG FM SG voltmeter

FM75Ω antenna terminal

Fig.6-1 AM and FM Adjustment Wiring Diagram

FM/AM TUNER MODULE


IC6202
L6102 L6101
FM
75Ω
T6101 antenna
terminal
C6238 Pin 28

VR6201
IC6201 AM
antenna
Pin 12 Pin 4 C6224 terminal
AXX1041
VR6202 C6261
F6202
L6207

Fig.6-2 Adjustment Points

52
VSX-D607S

7. GENERAL INFORMATION
7.1 DISPLAY

AAV7034 (FL/U-COM ASSY : V901)


• FL TUBE

• Pin Assignment

• Grid Assignment

53
VSX-D607S

• Anode Connection

54
VSX-D607S

7.2 PCB LOCATION

J L
R/C SPEAKER ASSY VIDEO/SR ASSY
M H O
PRIMARY ASSY DOLBY DIGITAL ASSY FM/AM TUNER
MODULE

Rear

POWER
TRANSFORMER C INPUT ASSY
D
TRANS ASSY

G
REG.1 ASSY

F E I
FRONT INPUT ASSY N REG.2 ASSY MOS FET ASSY VOLUME ASSY

B POWER SWITCH ASSY A FL U-COM ASSY


K R/C AMP ASSY

55
SW C Pre Out

56
IC1901
FM/AM TUNER
TONE BALANCE
MODULE Headphone
RY204
11, 18 IC409 IC404 TC9162AN
TAPE2 IC403 MAIN VOLUME
AF SECTION
VSX-D607S

10, 19
RY203
TAPE2 REC
12, 17 +

VCR 9, 30 IC701 FL-A



3, 26 RY201
VCR REC
IC701
7, 22
Rch FR OUTPUT +
8, 21
7.3 BLOCK DIAGRAM

LD FL-B

6, 23
DVD IC405 RY202
4, 25
CD
IC401 IC407 +
2, 27
EQ AMP RY151 SL
PHONO IC703
5, 24 –
IC407
FRONT AV TC9273N-007 IC703
IC402
+
RY151 SR

RY152
IC408
+
IC406
C
IC702

IC408
+
IC702

+
IC9251 AK5340-VS

LPF A/D ELECTRICAL VOLUME

Reg Power +
DVD DIR

IC9121 CD0004AF Rch


MUCAP +
D/A
(AC3&PROLOGIC&SFC)

IC9301 MB86342A IC9401, 9431, 9461 AK4319-VM AC-3 Power

+
AC-3 MODULE
Power Relay
RY51
FL

Standby Power
VSX-D607S

AC-3 DECODE ASSY AND VIDEO COMPOSITE SECTION

AC-3 DECODE ASSY

3.3V
SRAM
KM62V256CLG-7L

384fs

L/R L
PCM/ L/R 3.3V
BCK DF/DAC L out
DOLBY
DIGITAL DIR BCK(64fs) DATA AK4319-VM R
COAX CD0004AF R out
DATA
PCM/ AC-3
DOLBY DSP L/R LS
LS out
DIGITAL BCK DF/DAC Analogue
OPT MB86342A AK4319-VM
DATA RS Processing
(UCAP) RS out
IC
L/R 384fs
L
PA4025A
LPF A/D BCK(64fs) L/R C C out
NJM2100M AK5340-VS BCK DF/DAC
DATA AK4319-VM
R DATA LFE SW out

Analogue
384fs
18.432MHz

Host µ • com

VIDEO COMPOSITE SECTION

IN

VIDEO

OUT
MUTE

6dB MONITOR

LD/SAT

VCR 1/TAPE 1

DVD/TV VCR 1/TAPE 1

Mute

57
VSX-D607S

7.4 REMOTE CONTROL UNIT [CU-VSX128 (AXD7153)]


7.4.1 EXPLODED VIEWS AND PARTS LIST
NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
• The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• Screws adjacent to mark on the product are used for disassembly.

• Parts List
Mark No. Description Part No.

1 Filter AZA7152
2 Name Plate AZA7283
3 Rubber Sheet (A) AZA7236
4 Rubber Sheet (B) AZA7243
5 Spring (+) AZB7049

6 Spring (–) AZB7050


7 Spring AZB7051
8 Screw AZB7052
9 Remo-con Case (A) AZN7672
10 Remo-con Case (B) AZN7326

11 Battery Cover AZN7327


12 Main Key (FF) AZN7666
13 Main Key (STOP) AZN7329
14 Main Key (REV) AZN7665
15 Main Key (PAUSE) AZN7331

16 Main Key (PLAY) AZN7664


NSP 17 PCB AZW7243

58
1 2 3 4
VSX-D607S

7.4.2 SCHEMATIC DIAGRAM


Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".

SWITCHES
A
K01 :0
K02 :1
K03 :2
K04 :3
K05 :4
K06 :5
K07 :6
K08 :7
K09 :8
K10 :9
K11 :
K12 :
K13 : SET UP
K14 : MODE CHK
K15 : MULTI OPE.
K16 : SYS. OFF
K17 :
K18 :
K19 : ENT.
K20 : POWER
K21 : CH-
K22 : CH+
K23 : DISC
K24 : +10 B
K25 : VOL.-
K26 : VOL.+
K27 : TV FUNC.
K28 : TV POWER
K29 : AMP POW.
K30 : MUTING
K32 : FUNCTION
K33 : DVD
K34 : LD/SAT
K35 : CD
K36 : VCR1
K37 : TV CONT.
K38 : TUNER
K41 : SURROUND

59
1 2 3 4
1 2 3 4
VSX-D607S

7.4.3 PCB DIAGRAM

60
1 2 3 4
VSX-D607S

7.4.4 PCB PARTS LIST


NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
• The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
• When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω → 56 × 101 → 561 ........................................................ RD1/4PU 5 6 1 J
47k Ω → 47 × 103 → 473 ........................................................ RD1/4PU 4 7 3 J
0.5 Ω → R50 ..................................................................................... RN2H R 5 0 K
1Ω → 1R0 ..................................................................................... RS1P 1 R 0 K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω → 562 × 101 → 5621 ...................................................... RN1/4PC 5 6 2 1 F

Mark No. Description Part No.

SEMICONDUCTORS
IC1 AZC7279
IC2 AZC7278
IC3,IC4 TC74HC07AF
IC5 RH5VA21AA
Q4 2SA1037K

Q1-Q3 2SC3265
D1,D3,D7 SE1003-C
D2 SPS-503C-3
D8,D9,D11-D13,D15,D16 CL-230HR-CD
D4-D6 RLS-73

CAPACITORS
C2 CEAS470M10
C4-C7,C11 CKSQYB104K25
C3 CEAS221M6R3
C1 CEAS101M6R3
C10 CCSQCH101J50

RESISTORS
R2001,R2002 RS1/8S0R0J
R1,R2,R4 RS1/8S3R9J

Other Resistors RS1/10S J

OTHERS
X1,X2 RESONATOR (4MHz) KBR-4.0M

61
VSX-D607S

8. PANEL FACILITIES AND SPECIFICATIONS

* The size of characters shown in the figure may differ


NAMES OF PARTS from that on the actual product.

Front panel

1 2 3 4 5 6 7 8 9 0 -

DOLBY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER DIGITAL

STANDBY
DSP SIGNAL VCR/ TAPE 2
MODE SELECT LOUDNESS TAPE 1 DVD/TV LD/SAT CD TUNER PHONO MONITOR

POWER MASTER
STANDBY/ON VOLUME

OPTICAL RESET MPX MODE CLASS SELECT MULTI


BASS TREBLE BALANCE JOG
PHONES VIDEO INPUT
VIDEO L AUDIO R
SPEAKERS DIRECT MEMORY FM/AM ENTER

L R
MIN MAX
A B

= ~ ! @ # $ % ^ & * ( )
1 DSP MODE button $ DIRECT button
2 STANDBY indicator Use to play back sound without going through the
3 button tone and balance control circuits. DOLBY
SURROUND MODE, DSP MODE and LOUDNESS
4 SIGNAL SELECT button also turn off.
5 LOUDNESS button % MEMORY button
Press this button when the volume is low to raise the ^ FM/AM button
low and high range levels so that the sound can be
Use to switch the FM/AM frequency band reception.
heard more easily.
& ENTER button
6 Display
* SELECT button
7 OPTICAL button
Use to switch the control of the MULTI JOG between
8 RESET button station mode and frequency mode when operating the
9 MPX MODE button tuner.
Use to switch the auto stereo/monaural mode for re- ( MULTI JOG
ceiving FM broadcasts. When the received broadcast Use to select the frequency and station number when
signal is weak, press this button to set the monaural operating the tuner.
mode. ) MASTER VOLUME
0 CLASS button
- Function buttons
= POWER STANDBY/ON button
~ PHONES jack (Headphone terminal)
! VIDEO INPUT button/terminal
Connect to a video camera, etc.
@ TONE and BALANCE controls
Use to adjust tone and balance.
# SPEAKERS A, B buttons
ON/OFF switches for the A and B speaker systems.

62
VSX-D607S

Display

1 2 345 2 6 7 8 9 0 - = ~

SIGNAL PRO LOGIC DIRECT CLASS 1 2 3 MONO JOG MODE


DOLBY TUNED
SELECT LOUDNESS DSP MODE TAPE 2 ST FREQ
SP AB STEREO
DIGITAL DELAY
DIGITAL MEMORY
L C R
ANALOG
AM
AUTO Ls S Rs
FM
ATT OVERLOAD LFE ch

! @ # $ % ^

1 SIGNAL SELECT indicators = JOG MODE indicator


The input signal format currently selected will light . ST:
2 DOLBY DIGITAL and PRO LOGIC indicators Lights when the station mode is selected.
“DOLBY” lights when the Dolby Surround mode is FREQ:
ON. There are two Dolby Surround modes-Dolby Lights when the frequency mode is selected.
Digital (AC-3) and Dolby Pro Logic. “DOLBY” and
~ MEMORY indicator
“DIGITAL” light during Dolby Digital, and “DOLBY”
Lights when station memory is selected.
and “PRO LOGIC” light when played back in Dolby
Pro Logic. ! ATT indicator
Lights when INPUT ATT is ON.
3 PROGRAM FORMAT indicators
When playing back in the Dolby Digital (AC-3) mode, @ OVERLOAD indicator
the indicator of the channel set for the playback source Lights if the input level is excessive when ANALOG is
lights. selected (including AUTO) using the SIGNAL SELECT
button.
4 DELAY indicator
Lights when the delay time is being set. # LFE indicator
“LFE” lights when the LFE (Low Frequency Effects)
5 Speakers A, B indicator
channel is set for the playback source with Dolby
The indicator of the speaker system (A, B) selected
Digital. The LFE indicator also lights when LFE sig-
will light.
nals are input.
6 LOUDNESS indicator $ AM/FM indicators
Lights when LOUDNESS is ON.
The indicator of the band currently selected (AM/FM)
7 DSP MODE indicator lights.
Lights when DSP MODE is selected.
% CHARACTER display
8 DIRECT indicator ^ STATION display
Lights when DIRECT is ON.
Indicates the station number currently selected.
9 TAPE 2 indicator
Lights when TAPE 2 MONITOR is ON.
0 CLASS 1, 2, 3 indicators
The indicator of the class number selected lights.
- TUNER indicator
MONO:
Lights when the monaural mode is set using the MPX
MODE button.
TUNED:
Lights when broadcasts are being received.
STEREO:
Lights when stereo broadcasts are received during
auto stereo mode.

63
VSX-D607S

When connecting or changing equipment, be sure to turn


CONNECTING DEVICES OFF the POWER switch, and disconnect the power cord
from the wall outlet.

7 For better reception of signals, 7 When AM broadcast reception is poor


use an FM external antenna. Connect a 5 to 6 meter (15~18 feet) long vinyl-coated wire to the AM an-
tenna. If possible, draw horizontally outdoors to achieve better reception.
AM outdoor antenna
FM
UNBAL
75Ω
FM
UNBAL
75Ω
AM indoor antenna
(Vinyl-coated wire)
AM

75 Ω coaxial cable AM
5~6m (15~18 feet)
H
GND
H LOOP
GND ANTENNA
LOOP
ANTENNA

Stretch out the antenna fully and


secure onto a wall using pins. VCR

TV monitor
* Can also be
FM antenna connected to a
cassette deck.
7 Assembling the VCR
AM loop antenna VIDEO AUDIO/ AUDIO/
IN VIDEO VIDEO
OUT IN

VIDEO
OUT TO MONITOR TV
FM CONTROL
UNBAL OUT IN IN IN OUT IN

When attached onto a 75Ω


VIDEO
wall, etc.
IN OUT
AM IN IN PLAY REC IN IN OUT IN

L L

LOOP R R
ANTENNA

ANTENNA PHONO CD TAPE 2 LD/ VCR/ DVD/


MONITOR SAT TAPE1 TV
SIGNAL GND

AUDIO
PLAY OUT
OUTPUT REC INPUT VIDEO AUDIO
OUTPUT VIDEO OUT OUT OUT

CD

Turntable CD player Cassette deck LD player DVD player


* Can also be
Face towards the direc-
connected to a
tion with the best recep-
satellite sys-
tion.
tem.

64
VSX-D607S

7 Antenna terminal 7 Input/output plug 7 Speaker terminal 7 Front Panel


VID


EO AUDIO/VIDEO MULTI-CHANNE


/8 in.) L L


m(3
10m in.)


3/8
m(


R R
10m


VIDEO INPUT
VIDEO L AUDIO R


1


2


3


3


Connect the white plug to L, red plug to
2
R, and yellow plug to VIDEO. Be sure to Connect to equipment such
insert completely. as a video camera, etc.

* The size of characters and terminal positions in the figures may differ from those on the actual product.

PIONEER projection TV AC OUTLET


(Center channel) [SWITCHED 100 W (0.8 A)
C Speakers system (Rear) MAX]
R L Power supplied through this outlet
i s t u r n e d o n a n d o ff b y t h e
receiver’s POWER switch. Total
electrical power consumption of
connected equipment should not
exceed 100 W (0.8 A).

L-AUDIO (MONO) ª · ª · memo

CENTER ¶ This unit should be discon-


PRE OUT R L nected by removing the power
plug from the wall socket when
not in regular use, e.g., when
PCM/DOLBY DIGITAL
IN on vacation.
LD/SAT
PRE OUT
R L
¶ Do not connect appliances
SUB
WOOFER
with high power consumption
DVD/TV CENTER REAR such as heaters, irons, or
SPEAKERS
SPEAKER
television sets to this AC
OUTLET in order to avoid
OPTICAL
CAUTION: SPEAKER IMPEDANCE overheating and fire risk. This
8Ω~16Ω/SPEAKER
R L ATTENTION: IMPEDANCE DE HAUT-PARLEURS
AC 120V 60Hz can also cause the receiver
8Ω~16Ω/HAUT-PARLEUR
to malfunction.
A A
CAUTION: SEE INSTRUCTION CAUTION:
MANUAL DO NOT CONNECT
6Ω~16Ω/ 8Ω~16Ω/
TV SET OR MONITOR. CAUTION:
B B SPEAKER SPEAKER ATTNENTION: SWITCHED
ATTENTION:
NE RELIEZ PAS 100W MAX DO NOT CONNECT A
A L'APPAREIL
R L IMPEDANCE
SE REPORTER AU
MODE D'EMPLOI
DE TELEVISION
OU AU MONITEUR.
O.8A MAX
MONITOR OR TV SET TO THIS
FRONT SPEAKERS SELECTOR AC OUTLET
UNIT'S AC OUTLET.
R L

memo

Use nominal impedances such as


6 Ω to 16 Ω or 8 Ω to 16 Ω for the
Sub woofer with Speaker system (Front) speaker system. When using 6 Ω
built-in amplifier to 16 Ω, switch the IMPEDANCE
* The sub woofer can be connected in a different way. SELECTOR to 6 Ω to 16 Ω.
For details, refer to the instructions on the sub woofer.

65
VSX-D607S

Remote control unit 7 SURROUND/PERSONAL button


[When setting MULTI operations]
Press when setting the personal mode using multi
- operations.
RECEIVER POWER TV POWER
[When setting to other than MULTI opera-
1
tions]
G
POWER TV Press when performing surround operations and
2 MU
TIN
FU
NC = setting/changing setting modes.
FQ
8 Number/surround setting buttons
ENTER
3 [When setting surround (operations)]
FQ

: Turns the Dolby Surround mode ON/OFF.
DSP MODE: Switches the surround effects.
VOL VOL
ATT: If turned ON when the sound is unstable due to
4 CHANNEL
excessive input levels, the input signal level drops so
5 MULTI CONTROL
that the sound becomes clearer.
DVD LD/SAT CD TEST TONE: When turned ON (while in surround
6 VCR TV CONTROL TUNER
mode), volume balance adjustment signals are out-
PERSONAL put in order from the speakers and can be adjusted.
7 SURROUND
CENTER –, +: Adjusts the center level.
DSP MODE ATT TEST TONE
REAR –, +: Adjusts the rear level.
CENTER REAR SUB WOOFER –, +: Adjusts the sub woofer level.
8 EFFECT –, +: Adjusts DSP effects.
SUBWOOFER EFFECT
DISC [Tuner Operations]
CLASS TV/VCR
FUNCTION MODE CHECK Number buttons: Use for setting the frequency value
9 MULTI COMMANDER
~ when station call is selected or during direct access.
OPERATION SYSTEM OFF SET UP
0 ! CLASS: Switches the CLASS number.
@ [VCR Operations]
MULTI CONTROL COMMANDER TV/VCR: Switches between TV/VCR.
PRE-PROGRAMMED AND LEARNING

[CD Operations]
DISC: Use to select the DISC number.
9 FUNCTION button
Switches the function.
0 MULTI OPERATION button
1 RECEIVER POWER button Use to set multi operations.
2 MUTING button - POWER button
Press to mute the volume. Turns ON/OFF the power of devices other than this unit.
3 [When set to SURROUND (OPERATIONS)] = TV buttons
%,fi,@,# (Select/Adjust) and ENTER buttons ~ MODE CHECK button
[When set to other than SURROUND (OP- ! COMMANDER SET UP button
ERATIONS)] Use to control and learn operations of other manufac-
*(Pause), & (Stop), !(Rewind), ⁄(Fast Forward), turers' equipment, and set multi operation functions.
# (Play) buttons @ SYSTEM OFF button
4 VOL ( –, +) buttons Use to turn OFF the power of all equipment connected
5 [TV Operations] to the main unit.
Selects the TV broadcast channel.
[CD, LD, DVD operations]
$, › (Chapter/Track Search) buttons
6 MULTI CONTROL function buttons
Use to set and operate MULTI CONTROL, and switch
the function.
TV CONTROL: Press to operate the TV.

66
VSX-D607S

SPECIFICATIONS
Amplifier Section FM Tuner Section
Continuous average power output of 100 Frequency Range ......................................... 87.5 MHz to 108 MHz
Usable Sensitivity ..................... Mono: 11.2 dBf, IHF (1.0 µV/75 Ω)
watts* per channel, min., at 8 ohms, from 20 50 dB Quieting Sensitivity ....................................... Mono: 16.8 dBf
Hz to 20,000 Hz with no more than 0.09 %** Stereo: 38.6 dBf
total harmonic distortion (front). Signal-to-Noise Ratio ................................ Mono: 73 dB (at 85 dBf)
Continuous Power Output Stereo: 70 dB (at 85 dBf)
Front .................................... 100 W + 100 W (1 kHz, 0.8 %, 8 Ω) Distortion ........................................................ Stereo: 0.5 % (1kHz)
Center ............................................... 100 W (1 kHz, 0.8 %, 8 Ω) Alternate Channel Selectivity ................................ 60 dB (400 kHz)
Rear .................................................. 100 W (1 kHz, 0.8 %, 8 Ω) Stereo Separation ..................................................... 40 dB (1 kHz)
Frequency Response ............................... 30 Hz to 15 kHz (± 1) dB
Input (Sensitivity/Impedance) Antenna Input ....................................................... 75 Ω unbalanced
PHONO MM .......................................................... 2.8 mV/47 kΩ
LD/SAT, CD, VCR/TAPE 1, TAPE 2 AM Tuner Section
DVD/TV, VIDEO .................................................... 200 mV/47 kΩ Frequency Range ..................... 531 kHz to 1,602 kHz (9 kHz step)
Phono Overload Level (T.H.D. 0.1 %, 1kHz) 530 kHz to 1,700 kHz (10 kHz step)
PHONO MM .................................................................... 100 mV Sensitivity (IHF, Loop antenna) ....................................... 350 µV/m
Frequency Response Selectivity ............................................................................... 25 dB
PHONO MM ................................... 20 Hz to 20,000 Hz ± 0.3 dB Signal-to-Noise Ratio ............................................................. 50 dB
LD/SAT, CD, VCR/TAPE 1, TAPE 2 Antenna ..................................................................... Loop antenna
+0
DVD/TV, VIDEO ................................... 5 Hz to 100,000 Hz –3 dB
Output (Level/Impedance) Miscellaneous
VCR/TAPE 1 REC, TAPE 2 REC ......................... 200 mV/2.2 kΩ Power Requirements ............................................. AC 120 V, 60 Hz
Tone Control Power Consumption ................................................. 280 W, 400 VA
BASS .................................................................. ± 9 dB (100 Hz) In Standby Condition .............................................................. 2.5 W
TREBLE ............................................................. ± 9 dB (10 kHz) AC Outlet
Signal-to-Noise Ratio (IHF, short circuited, A network) SWITCHED .................................................. 100 W (0.8 A) MAX
PHONO MM ....................................................................... 75 dB Dimensions ................................. 420 (W) × 158 (H) × 374 (D) mm
LD/SAT, CD, VCR/TAPE 1, TAPE 2, DVD/TV, VIDEO ......... 97 dB 16-9/16 (W) × 6-1/4 (H) × 14-3/4 (D) in.
Signal-to-Noise Ratio [EIA, at 1 W (1kHz)] Weight (without package) ................................. 9.4 kg (20 lb 12 oz)
PHONO MM ....................................................................... 75 dB
LD/SAT, CD, VCR/TAPE 1, TAPE 2, DVD/TV, VIDEO ......... 80 dB Furnished Parts
* Measured pursuant to the Federal Trade Commission’s Trade FM Antenna .................................................................................. 1
Regulation rule on Power Output Claims for Amplifiers. AM Loop Antenna ......................................................................... 1
** Measured by Audio Spectrum Analyzer. Dry Cell Batteries (AA/LR6) .......................................................... 2
Remote Control Unit ..................................................................... 1
VIDEO Section Operating Instructions ................................................................... 1
Input (Sensitivity/Impedance) Sub Instruction Manual (Remote Control Unit) ............................. 1
LD/SAT, VCR, DVD/TV, VIDEO ................................. 1 Vp-p/75 Ω Sub Instruction Manual [Dolby Digital (AC-3)] ............................... 1
Output (Level/Impedance)
VCR REC, MONITOR TV ......................................... 1 Vp-p/75 Ω NOTE:
Frequency Response Specifications and the design are subject to possible modifications
LD/SAT, VCR, DVD/TV, VIDEO without notice, due to improvements.
= MONITOR ............................................... 5 Hz to 7 MHz +0 –3 dB
Signal-to-Noise Ratio ............................................................. 55 dB
Cross Talk .............................................................................. 55 dB

• ACCESSORIES

Manufactured under license from Dolby Laboratories Licensing


Corporation. “Dolby”, “AC-3”, “Pro Logic” and the double-D symbol
are trademarks of Dolby Laboratories Licensing Corporation.
Copyright 1992 Dolby Laboratories, Inc. All rights reserved. FM antenna
(ADH7004) AM loop antenna
(ATB7009)

Remote control unit Alkaline dry cell batteries


(AXD7153) (size “AA” IEC LR6) × 2
(CU-VSX128) (AEX1007)

67

You might also like