Cat c3.3 Data Sheet
Cat c3.3 Data Sheet
Cat c3.3 Data Sheet
3 ®
DIESEL GENERATOR SETS
Standby & Prime: 50 Hz, 380/220V & 60Hz 220/127V; 3-Ph Engine Model Cat® C3.3 In-line 3, 4-cycle diesel
Bore x Stroke 105.0 mm x 127.0 mm (4.1in x 5.0 in)
Displacement 3.3 L (201.4 in³)
Compression Ratio 17.25:1
Aspiration Turbocharged
Governor Mechanical
Emission Strategy Non-Certified Emissions
Technical Data 50 Hz 60 Hz
Standby Prime Standby Prime
Engine Speed: RPM 1500 1800
Gross Engine Power: kW (hp) 46.5 (62.0) 42.2 (57.0) 55.6 (75.0) 50.5 (68.0)
BMEP: kPa (psi) 1127.0 (163.5) 1023.0 (148.4) 1124.0 (163.0) 1020.0 (148.0)
Regenerative Power: kW 7.0 9.0
Fuel System 1
LEHE1742-00
1/3
Cat C3.3 ®
DIESEL GENERATOR SETS
Exhaust System 50 Hz 60 Hz
Standby Prime Standby Prime
Exhaust Gas Flow: m³/min (cfm) 7.7 (272) 7.0 (247) 9.5 (335) 8.8 (311)
Exhaust Gas Temperature: °C (°F) 537 (999) 492 (918) 551 (1024) 510 (950)
Silencer Type Industrial Industrial
Silencer Model & Quantity: EXSY1 (1) EXSY1 (1)
Pressure Drop Across Silencer System: kPa (in Hg) 0.82 (0.242) 1.08 (0.319)
Silencer Noise Reduction Level: dB 20 18
Max. Allowable Back Pressure: kPa (in. Hg) 10.0 (3.0) 15.0 (4.4)
Capacities
50 Hz 60 Hz
Prime Standby Prime Standby
Voltages Voltages
kVA kW kVA kW kVA kW kVA kW
LEHE1742-00
2/3
Cat C3.3 ®
DIESEL GENERATOR SETS
Weights Dimensions
Wet (+ lube oil & Fuel, lube oil &
Net (+ lube oil) Length, A Width, B Height, C
coolant) coolant
814 kg, 1795 lb 826 kg, 1821 lb 949 kg, 2092 lb 1680 mm, 66.1 in 760 mm, 29.9 in 1333 mm, 52.5 in
B A
Note: General configuration not to be used for installation. See general dimension drawings for detail.
Notes:
1
Based on diesel fuel with a specific gravity of 0.85 and conforming to BS2869, Class A2.
2
Cooling system designed to operate in ambient conditions up to 50°C (122°F). Contact your local Cat dealer for power
ratings at specific site conditions.
3
Reactances shown are applicable to prime ratings. *Based on 30% voltage dip at 0.6 power factor
DEFINITIONS:
STANDBY: These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on
these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3).
PRIME: These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the
annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours.
Documents: A full set of operation and maintenance manuals and circuit wiring diagrams.
Quality Standards: The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22.
Warranty: All prime equipment carries a one year manufacturer's warranty. Standby equipment, limited to 500 running hours per year, has a two-year manufacturer's
warranty. For details on warranty cover please contact your local CAT Dealer.
LEHE1742-00 (04/18)
www.Cat.com/electricpower
©2018 Caterpillar All rights reserved. Materials and specifications are subject to change without notice. CAT, CATERPILLAR, their
respective logos, ADEM, S•O•S, BUILT FOR IT, “Caterpillar Yellow”, the “Power Edge” trade dress as well as corporate and product
LEHE1742-00
identity used herein, are trademarks of Caterpillar and may not be used without permission.
3/3