Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
322 views

Machine Design Assignment-1

This document contains an assignment for a Machine Design course. It includes 5 questions related to analyzing and designing machine elements. The questions assess learning outcomes related to applying principles of solid mechanics to machine elements under static and fluctuating loads and designing elements to meet specifications. Dimensions and/or safety factors must be determined for components like a C-frame, link, press frame, and bracket made of materials like cast iron and steel and subjected to forces.

Uploaded by

RAJAT RAJ
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
322 views

Machine Design Assignment-1

This document contains an assignment for a Machine Design course. It includes 5 questions related to analyzing and designing machine elements. The questions assess learning outcomes related to applying principles of solid mechanics to machine elements under static and fluctuating loads and designing elements to meet specifications. Dimensions and/or safety factors must be determined for components like a C-frame, link, press frame, and bracket made of materials like cast iron and steel and subjected to forces.

Uploaded by

RAJAT RAJ
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

G.L.

BAJAJ INSTITUTE OF TECHNOLOGY & MANAGEMENT


GREATER NOIDA
B. TECH – (SEM-VI) - (Branch-ME) (Sections-A)
Assignment-1 (EVEN SEM 2020-21)
(KME-602) Machine Design
Faculty Name: Dr. Ambuj Saxena (email: ambuj.saxena@glbitm.ac.in)
Date of Issue: 12-05-21 Date of Submission:22-05-21
Course Outcomes:
Following are the course outcomes of the subject: -

CO Code Course Outcome (CO) Bloom's Level


KME602.1 Recall the basic concepts of Solid Mechanics to understand the L2
subject.
KME602.2 Classify various machine elements based on their functions and L2
applications.
KME602.3 Apply the principles of solid mechanics to machine elements L3
subjected to static and fluctuating loads.
KME602.4 Analyze forces, bending moments, twisting moments and failure L4
causes in various machine elements to be designed.
KME602.5 Design the machine elements to meet the required specification. L5

Q1 A C-frame subjected to a force of 15 kN is shown in Fig. 1. It is made of grey cast iron FG 300 and the
factor of safety is 2.5. Determine the dimensions of the cross-section of the frame. (KME602.3)

Fig. 1 Fig. 2
Q2 The principal stresses induced at a point in a machine component made of steel 50C4 (Syt = 460 N/mm2)
are as follows: σ1 = 200N/mm2, σ2 = 150 N/mm2, σ3 = 0 Calculate the factor of safety by (i) the
maximum shear stress theory, and (ii) the distortion energy theory. (KME602.3)

Q3 A link of S-shape made of a round steel bar is shown in Fig. 2. It is made of plain carbon steel 45C8 (Syt
= 380 N/mm2) and the factor of safety is 4.5. Calculate the dimensions of the link. (KME602.4)

Q4 The frame of a 100 kN capacity press is shown in Fig. 3. It is made of grey cast iron FG 300 and the
factor of safety is 2.5. Determine the dimensions of the cross-section at XX. (KME602.3)
1|Page
Fig. 3 Fig. 4

Q5: A bracket, made of steel FeE 200 (Syt = 200 N/mm2) and subjected to a force of 5 kN acting at an angle
of 30° to the vertical, is shown in Fig. 4. The factor of safety is 4. Determine the dimensions of the cross-section
of the bracket. (KME602.4)

2|Page

You might also like