Architecture MCQ (Rohit Kumar Verma 170544)

ARCHITECTURE MCQS
Unit 1
1. To ensure quality work, architects will be engaged only on
● Selective services
✔ Comprehensive services
● Partial services
● Special services
2. ___ is a language and tool for assessing the spatial scale of environmental impact.
✔ Ecological Foot printing
● Eco balance
● Entropy
● Ecological baselining
●
3. What is meant by ‘ASLA’ in Landscape Architecture?
● All Indian Society of Landscape Architects
● American Solution of Landscape Artists
✔ American Society of Landscape Architects
● Asian Society of Landscape Art
4. According to Doxiadis, mono centric city developing in one direction is called

✔ Dynapolis
● Dynametropolis
● Dynapoloiscentric
● Monopoly
5. The recommended space standards for Local Street is
● 0 – 10 m
✔ 10 – 20 m
● 20 – 30 m
● 30 – 40 m
6. Identify the one that is associated with quality of space.

● Surface
● Dimension
● Edge
✔ Scale
7. One or more of the large cities in a country that holds a relatively high percentage of the
total
urban population is referred as
✔ Primate City
● (B) Hyper City
● Cosmo City
● Metro City
8. The concept of Garden city was advocated by

● Raymond Stein
✔ Raymond Unwin
● Clarience Stien
● Radburn
9. means and includes returning the existing fabric of a place to a known earlier state.
● Rejuvenation
● Adaptation
✔ Restoration
● Reconstruction
10. It combines the heating effect of radiation incident on a building with the effect of warm
air.
● Surface resistance
● Absorptivity
● Cavity resistance
✔ Sol-air temperature
Unit 2
1. ____________ refers to the effect produced by deriving the maximum benefits from the
minimum dimensions off a room.
● Compactness
✔ Roominess
● Grouping
● Privacy
2. The symbol given below represents __________

● Sliding Door
✔ Revolving Door
● Stairs
● Window
3. Symbols given below represent __________

● Single leaf, single swing door and double leaf, double swing door
● Single leaf, double swing door and double leaf, double swing door
● Double leaf, single swing door and single leaf, single swing door
✔ Single leaf, single swing door and single leaf, double swing door
4. Kitchen should be placed opposite to the direction of the prevailing wind

● True
✔ False
5. For residential building the livable area should be 50% to 65% of the plinth area.
● True
✔ False
6. Drawing room should be light and ventilated and located in the heart of the building.
● False
✔ True
7. Which factor is not considered on studying of site?
✔ Number of Gender Ratio
● Study of Site with Respect to Other Surrounding Sites
● Study of Geographical and Geological Conditions of Site
● Location Site
8. is defined as a job or action to be completed, between two events within a project.
● Planning
● Event
✔ Activity
● Sequence
9. General land use planning deals with:
● Residential
● Institutional
✔ Forests
● Commercial
10. Which of the following includes Commercial Recreation?
● Clubs
● Attractions
● Theme Parks
✔ All of The Above
UNIT 3
1. The process of selecting and viewing the picture with a different view is called ___.
● Windowing
● Cropping
● Clipping
● Filling
2. The Cartesian slope-intercept equation for a straight line is

● Y = M.X + B
● Y = B.X + M
● Y = X.X + M
● Y = B + M.M
3. In Bresenham’s line algorithm, if the distances d1 < d2 then decision parameter Pk

is______
● Positive
● Equal
● Negative
● D) Option A Or C
4. The computer-aided design (CAD) hardware doesn’t include.
● Graphic Display Terminals
● Computer
✔ Computer Programs
● Keyboard
5. The computer communicates with the user via:
● CPU
✔ CRT
● Graphics
● Display Button
6. Computer graphics is an extremely effective medium for communication between ___

and ___
✔ Human beings, Computers
● Display, Computer
● Input, Output
● Virtual reality, Real World
7. ___ equation can be used to find y coordinate for the known x coordinate.
● Differential
✔ Polynomial
● Simultaneously
● Binomial
8. Algorithms that fill the interior, that defines regions are called ___.
● Boundary Fill algorithm
✔ Flood Fill algorithm
● Scan line algorithm
● Fill area algorithm
9. The region against which an object is to be clipped is called ___.

● Clip Window
● Crop Window
● Cross Section
● Connecting Window
10. ___ is the procedure used to identify if any portions of a picture are within or outside of a
specific region of space.
● Clipping
● Copying
● Conversion
● Communication
UNIT 4
1. To create scenes, images, pictures and also animated pictures ___ acts as a very
powerful tool.
● Graphics package
● Graphics controller
● Graphics software
● Graphics card
2. The number of colour choices can be increased by decreasing the number of ___ to the
frame colour.
● Grayscale
● Bits per pixel
● Intensity level
● Brightness
3. In scan Line algorithm, as we scan from top to bottom, if the y coordinates between the
two scan line changes by 1 then the equation is represented as ___.
● Yi+1=Yi -1
● Yi+1=Yi +1
● Yi-1=Yi -1
● Yi+1=Yi /1
4. ___ allow the programmer to define picture that include a variety of transformations.
● Human-computer information retrieval
● Graphics systems
● Software testing
● Networking
5. If the direction of the projection is normal then it is called ___.

● Orthographic parallel projection
● Oblique parallel projection
● Perspective Projection
● Ortho-Oblique Projection
6. a). Provides pixel to a desired picture or graphics object

b). Converts continuous picture into discrete pixels.
The above special procedure is named ___.
● Rasterization
● Quantization
● Motion dynamics
● Update dynamics
7. ___ is a small group of ___ with a fixed colour combination used to fill the particular area
in the picture
● Pattern & Pixels
● Picture & Pixels
● Tiling pattern & Pictures
● Tiling pattern & Pixels
8. Implementing CAD improves communications.

● True
● False
9. ___ is responsible for producing the picture from the detailed descriptions.
● Graphical System
● Application model
● Conceptual model
● Application program
10. The raster-scan generator produces ___ that generate the raster scan.
● Pixel values
● Deflection beams
● Deflection signals
● None of the above
UNIT 5
1. Some of the standard Auto-CAD text styles used in architectural drawings includes
_________.
A. City Blueprint
B. Country Blueprint
C. Stylus BT
D. All of the above
2 A fillet is a rounded surface on the ________ corner of a part.
A. Inside
B. Outside
C. Radial
D. Isoplane
3. A full scale technical drawing will have a scale factor of ________.
A. 1:1
B. 1:2
C. 2:1
D. 1:4
4.This allows the performance of structures to be analyzed and tested efficiently,

accurately, and quickly:
Computer-aided manufacturing
B. Computer-aided design
C. Computer-aided engineering
D. Computer-aided prototyping
5. When lines intersect on a drawing at angles of this many degrees, it is customary not to
dimension the angle:
A. 360
B. 180
C. 90
D. 45
.
6. The building construction industry relies on sets of ________ drawings to construct homes
and commercial buildings.
A. Mechanical
B. Isometric
C. Architectural working
D. All of the above
7. Architectural dimensioning standards allow for the placement of dimensions inside the
floor plan. These inside dimensions locate interior __________.
. Door openings and walls
B. Centers of cabinets
C. Windows
D. All of the above
8. There are two main types of projection:
Parallel and Orthographic
B. Station-point and Perspective
C. Parallel and Convergent
D. Perspective and Parallel
9. Dimensions are used on the elevation plan to describe ________.

Finished floor elevations
B. Roof overhangs
C. Roof pitch angles
D. All of the above
10. Generally, the units used on an architectural drawing are set to __________.
A. Architectural
B. Engineering
C. Metric
D. Civil

Architecture MCQ (Rohit Kumar Verma 170544)

Uploaded by

Copyright:

Available Formats

Architecture MCQ (Rohit Kumar Verma 170544)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Architecture MCQ (Rohit Kumar Verma 170544)

Uploaded by

Copyright:

Available Formats

ARCHITECTURE MCQS

4. According to Doxiadis, mono centric city developing in one direction is called

6. Identify the one that is associated with quality of space.

8. The concept of Garden city was advocated by

2. The symbol given below represents __________

3. Symbols given below represent __________

4. Kitchen should be placed opposite to the direction of the prevailing wind

2. The Cartesian slope-intercept equation for a straight line is

3. In Bresenham’s line algorithm, if the distances d1 < d2 then decision parameter Pk

6. Computer graphics is an extremely effective medium for communication between ___

9. The region against which an object is to be clipped is called ___.

5. If the direction of the projection is normal then it is called ___.

6. a). Provides pixel to a desired picture or graphics object

8. Implementing CAD improves communications.

D. All of the above

2 A fillet is a rounded surface on the ________ corner of a part.

3. A full scale technical drawing will have a scale factor of ________.

4.This allows the performance of structures to be analyzed and tested efficiently,

D. All of the above

D. All of the above

8. There are two main types of projection:

Parallel and Orthographic

B. Station-point and Perspective

C. Parallel and Convergent

D. Perspective and Parallel

9. Dimensions are used on the elevation plan to describe ________.

C. Roof pitch angles

D. All of the above

You might also like