Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 81 views

    Cep Waqar Ali: Electrical Power BATCH-6 Submitted To: Eng. Haseeb Khan

    Uploaded by

    Waqar Ali
    This document outlines a project to design a power supply that converts 220V AC to 12V DC using commonly available electronic components. The bill of materials includes a center tapped transformer, diodes, capacitors, a voltage regulator, and heat sink. A schematic diagram and Multisim simulation are presented. The methodology, objectives, literature review, applications, budget, timeline, and references are also summarized. The power supply is intended to provide a stable 12V output for other circuits.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cep Waqar Ali: Electrical Power BATCH-6 Submitted To: Eng. Haseeb Khan

    Uploaded by

    Waqar Ali
    81 views6 pages
    This document outlines a project to design a power supply that converts 220V AC to 12V DC using commonly available electronic components. The bill of materials includes a center tapped transformer, diodes, capacitors, a voltage regulator, and heat sink. A schematic diagram and Multisim simulation are presented. The methodology, objectives, literature review, applications, budget, timeline, and references are also summarized. The power supply is intended to provide a stable 12V output for other circuits.

    Original Title

    CEP EDC

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines a project to design a power supply that converts 220V AC to 12V DC using commonly available electronic components. The bill of materials includes a center tapped transformer, diodes, capacitors, a voltage regulator, and heat sink. A schematic diagram and Multisim simulation are presented. The methodology, objectives, literature review, applications, budget, timeline, and references are also summarized. The power supply is intended to provide a stable 12V output for other circuits.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    81 views6 pages

    Cep Waqar Ali: Electrical Power BATCH-6 Submitted To: Eng. Haseeb Khan

    Uploaded by

    Waqar Ali
    This document outlines a project to design a power supply that converts 220V AC to 12V DC using commonly available electronic components. The bill of materials includes a center tapped transformer, diodes, capacitors, a voltage regulator, and heat sink. A schematic diagram and Multisim simulation are presented. The methodology, objectives, literature review, applications, budget, timeline, and references are also summarized. The power supply is intended to provide a stable 12V output for other circuits.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    CEP Waqar Ali

    EDC-1 17mdele0461(Improvement)

    UNIVERSITY OF ENGINEERING &


    TECHNOLOGY, MARDAN

    Electrical Power BATCH-6


    Submitted To:
    Eng. Haseeb Khan
    Make use of the below component design a Power Supply:

    Qu
    Sr. Component
    ant
    no.
    ity

    Transforme
    1 1
    r

    2 Diodes 4

    Capacitor
    3 1
    1000µF

    Voltage
    4 Regulator 1
    LM7812

    Capacitor
    5 1
    1µF

    6 Heat Sink 1

     The Power Supply shall have the following feature:


     It should convert 220 V AC to 12 V DC.
    Present the schematic diagram for the above task. Validate the implemented
    system using hardware construction
    TABLE OF CONTENTS
    1. Tittle Page
    2. Project Objective
    3. Circuit & Simulation Diagram
    4. Methodology
    5. Literature review
    6. Utilization of project result
    7. Apparatus
    8. Budget
    9. Project timeline
    10.Reference
    OBJECTIVE:
    HIGH-220 TO LOW-12 VOLTAGE REGULATOR USING
    CENTER TRAPPED TRANSFORMER AND IC LM7812

    Circuit Diagram:
    It is just Used for understanding values of Component
    will be change in multisim simulation.

    Simulation Diagram:
    METHODOLOGY:
    1. The circuit consists of a center trapped transformer having 120 rms
    and two diodes which is
    connected to a capacitor of 1000 uf.
    2. The 7812 IC is used as a regulator.
    3. The output terminal is also connected to a capacitor of 1uf.
    4. The output voltage is approximately 12 V.

    Output voltage: The specification for the 7812 shows that the output
    voltage is typically 12 V but could be as low
    as 11.5 V or as high as 12.5 V.

    Output regulation: The output voltage regulation is seen to be


    typically 4 mV, to a maximum of 100 mV (at output
    currents from 0.25 A to 0.75 A). This information specifies that the
    output voltage can typically vary only 4 mV
    from the rated 12 V dc.

    Literature Review
    The selection of this project is to do something different when I
    search the idea for electronics project
    everywhere I found the project that having no specification and
    the function of the component which is
    used in the project is not explained well.

    Utilization of Project Results


    This project will help in FYP when we are dealing with
    transformer and 7812 IC or when we need and output without
    any ripple.

    APPARATUS:
    1. Center trapped transformer
    2. IC 7812
    3. Capacitor 470 uf
    4. Capacitor 0.01uf
    5. Diodes

    BUDGET:
    Approximately 1200 rupees.

    PROJECT TIMELINE:
    25 June to 20 July

    REFERENCE:
    1. Internet
    2. Electronics lab
    3. Books

    You might also like