AL1716 e
AL1716 e
AL1716 e
Service Guide
Service guide files and updates are available on the CSD web: for more
information,
Please refer to http://csd.acer.com.tw/
-1-
Copyright
Copyright © 2003 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language,
in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise,
without the prior written permission of Acer Incorporated.
Disclaimer
The information in this guide is subject to change without notice. Acer Incorporated makes no
representations or warranties, either expresses or implied, with respect to the contents hereof and
specifically disclaims any warranties of merchantability or fitness for any particular purpose, Any Acer
Incorporated software described in this manual is sold or licensed “as is ”. Should the programs prove
defective following their purchase, the buyer (and not Acer Incorporated, its distributor, of its dealer)
assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software.
-2-
Conventions
Warning Alerts you to any damage that might result from doing or
not doing specific actions.
Caution Gives precautionary measures to avoid possible hardware or
software problems.
-3-
Preface
Before using this information and the product it supports, please read the following general information.
1. This Service Guide provides you with all technical information relating to BASICCONFIGURATION
decided for Acer’s “global” product offering. To better fit local market requirements and enhance product
competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g.
add-on card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be covered
in this generic service guide. In such cases, please contact your regional offices or the responsible
personnel/channel to provide you with further technical details.
2. Please not WHEN ORDERING FRU PARTS, that you should check the most up-to-date information
available on your regional web or channel. If, for whatever reason, a part number change is made, it will
not be noted in the printed Service Guide, for ACER-AUTHORIZED SERVICE PROVIDERS, your Acer
office may have a DIFFERENT part number code to those given in the FRU list of this printed Service
Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and
service of customer machines.
-4-
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: this equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
1. The changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission
limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. It is the responsibility of the user to correct such interference.
As an ENERGY STAR® Partner our company has determined that this product meets the ENERGY STAR®
guidelines for energy efficiency.
WARNING:
To prevent fire or chock hazard, do not expose the monitor to rain or moisture. Dangerously high
voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified
personnel only.
-5-
PRECAUTIONS
l Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub,
Swimming pool or in a wet basement.
l Do not place the monitor on an unstable trolley, stand, or table. If the monitor falls, it can injure a
person and cause serious damage to the appliance. Use only a trolley or stand recommended by the
manufacture or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit
approved by the manufacture and follow the kit instructions.
l Slots and openings in the back and bottom of the cabinet area provided for ventilation. To ensure
reliable operation of the monitor and to protect it from overheating, be sure these openings are not
blocked or covered. Do not place the monitor on a bed, sofa, rug or similar surface. Do not place the
monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet
unless proper ventilation is provided.
l The monitor should be operated only from the type of power source indicated on the label. If you are
not sure of the type of power supplied to your home, consult your dealer or local power company.
l The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This
plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate
the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the
appliance safely. Do not defeat the safety purpose of the grounded plug.
l Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will
protect the monitor from damage due to power surges.
l Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
l Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or
electric shock. Never spill liquids on the monitor.
l Do not attempt to service the monitor yourself; opening or removing covers can expose you to
dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.
l To ensure satisfactory operation, use the monitor only with UL listed computers which have
appropriate configured receptacles marked between 100-240V AC, Min. 3.5A.
l The wall socket shall be installed near the equipment and shall be easily accessible.
l For use only with the attached power adapter (output 12V DC) which have UL,CSA listed license
-6-
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem.
NOTES
l Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power
Switch and then turn it on again to make sure the flicker disappears.
l You may find slightly uneven brightness in the screen depending on the desktop pattern you use.
l The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such
as a missing pixel or a pixel lit all of the time.
l Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching
the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by
changing the image or turning off the Power Switch for hours.
-7-
Table of contents
Chapter 1 MONITOR FEATURE … … … … … … … … … … … … … … … … … … … … … … .9
-8-
Chapter 1
Monitor Feature
-9-
Separate Sync H/V TTL
H-Frequency 31-81KHZ
V-Frequency 56-75HZ
Display Color 16.2 million Colors
Maximum Dot Clock ® 135MHz
Max Resolution 1280x1024@75HZ
Plug & Play VESA DDC2B
ON Mode <40W
EPA ENERGY STAY OFF Mode <1W
Audio output Rated Power 2.0W rms(Per channel)
Input Connector D-Sub 15 pin,
Input Video Signal Analog : 0.7Vp-p,75OHM
Horizontal : 337.9mm
Screen Size (Active) Vertical : 270.3mm
Power Source 90~264 Vac, 47~63HZ
- 10 -
* Contrast/brightness
* Focus
* Clock
* H.Position
* W.Position
* Language
* OSD Color temperature
* OSD Position & Timeout
* Auto Config
* Input
* Information
* Reset
* Exit
Regulatory Compliance cUL, FCC, TUV, CE, ISO13406-2
- 11 -
Timings
The product has 26 memory modes in total. 16 modes are preset and 10 modes
are user definable.
MODE NO. 1 2 3 4
35.0kHz
fh 31.469kHz 31.469kHz 37.861kHz
O (ms ) 14.27(449 lines) 16.683 (525 15.000 (525 lines ) 13.735(520 lines)
lines )
Q (ms ) 1.112(35 lines) 1.049 (33 lines ) 1.114 (39 lines ) 0.739(28 lines)
lines )
POLARITY Or -/-
SEP . SYNC Y Y Y Y
MODE NO. 5 6 7 8
- 12 -
B ( us ) 2.032 (64 dots) 2.00(72 dots) 3.200 (128 dots) 1.616 (80 dots)
C ( us ) 3.810 (120 dots) 3.56(128 dots) 2.200 ( 88 dots) 3.232 (160 dots)
D ( us ) 20.317 (640 dots) 22.22(800 dots) 20.00 ( 800 dots) 16.162 (800 dots)
E ( us ) 0.508 (6 dots) 0.67(24 dots) 1.000 (40 dots) 0.323 (16 dots)
O (ms ) 13.333 (500 17.78(625 lines) 16.58 (628 lines) 13.333 (625lines)
lines)
Q (ms ) 0.427 (16 lines) 0.63(22 lines) 0.607 (23 lines) 0.448 (21 lines)
R ( ms ) 12.80 (480 lines) 17.07(600 lines) 15.84 (600 lines) 12.80 (600lines)
POLARITY
SEP . SYNC Y Y Y Y
MODE NO. 9 10 11 12
D ( us ) 16.00 (800 dots) 14.52( 832 dots ) 15.754(1024 dots) 13.65(1024 dots)
O (ms ) 13.85 (666 lines) 13.41(667 lines) 16.666(806 lines) 14.27(806 lines)
Q (ms ) 0.478 (23 lines) 0.78(39 lines) 0.600(29 lines) 0.51(29 lines)
R ( ms ) 12.48 (600 lines) 12.55 (624 lines) 15.880(768 lines) 13.60(768 lines)
line )
- 13 -
POLARITY
SEP . SYNC Y Y Y Y
MODE NO. 13 14 15 16
dots)
B ( us ) 1.22 (96 dots) 1.037 (112 dots) 1.067 (144 dots) 1.185(128 dots)
C ( us ) 2.23 (176 dots) 2.296 (248 dots) 1.837 (248 dots) 2.370(256 dots)
dots)
E ( us ) 0.20 (16 dots) 0.444 (48 dots) 0.119 (16 dots) 0.593(64 dots)
O (ms ) 13.33 (800 lines) 16.661 (1066 13.329 (1066 lines) 13.333(900 lines)
lines)
Q (ms ) 0.47 (28 lines) 0.594 ( 38 lines) 0.475 (38 lines) 0.474(32 lines)
lines)
POLARITY
SEP . SYNC Y Y Y Y
A : H-Total O : V-Total
- 14 -
]
- 15 -
PCB CONDUCTOR VIEW
Main Board
- 16 -
Chapter 2
OPERATING INSTRUCTIONS
External Controls
Power on/off
?1 POWER Blue: power on
Orange: in sleep mode
- 17 -
OSD Menu
Picture
Brightness:
This adjusts the brightness of the picture on the screen.
Contrast:
This adjusts dark and light shades of color relative to each other to
achieve a comfortable contrast.
Color temp. :
There are three ways of adjusting color:
Warm (Reddish white)
Cool (Bluish white)
User : You can adjust the colors red, green and blue to the intensity
you desire.
Focus:
This removes any horizontal distortion and makes the picture clear
and sharp.
Clock:
If there are any vertical stripes seen on the background of the screen
this renders them less noticeable by minimizing their size. It also
changes the size of the horizontal screen.
H-Position:
This adjusts the horizontal screen position.
V-Position:
This adjusts the vertical screen position.
- 18 -
Option
Auto Config. :
System runs auto-configuration.
Reset:
Recall to default settings.
Information:
This shows brief information on the screen.
Setting
Language:
Select the OSD menu language from
English, French, German, Italian, Spanish, Simplified Chinese,
Traditional Chinese, Japanese and Russian.
OSD H. Position
OSD V. Position
OSD Time-out
This changes the position of the OSD window on the screen and staying
time.
- 19 -
LED Definition
The system equips one dual color (blue/amber) led to indict system status and defined as bellows :
LOGO :
When the monitor is power on, the LOGO will be showed in the center, and disappear slowly.
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It
allows the monitor to inform the host system of its identity and, depending on the level of DDC used,
communicate additional information about its display capabilities. The communication channel is defined in
two levels, DDC2B.
The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID
information over the DDC2B channel.
- 20 -
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT
SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A
VIDEO INPUT SIGNAL.
This monitor meets the Green monitor standards as set by the Video Electronics Standards
Association(VESA) and/or the United States Environmental Protection Agency (EPA) and The Swedish
Confederation Employees (NUTEK). This feature is designed to conserve electrical energy by reducing
power consumption when there is no video-input signal present. When there is no video input signal this
monitor, following a time-out period, will automatically switch to an OFF mode. This reduces the monitor’s
internal power supply consumption. After the video input signal is restored, full power is restored and the
display is automatically redrawn. The appearance is similar to a “Screen Saver” feature except the display is
completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse.
The accessory power cord for the Northern American region is the wallet plug with NEMA 5-15 style and is
UL listed and CSA labeled. The voltage rating for the power cord shall be 125 volt AC.
Supplied with units intended for connection to power outlet of personal computer: Please use a cord set
consisting of a minimum No. 18 AWG, type SJT or SVT three conductors flexible cord. One end terminates
with a grounding type attachment plug, rated 10A, 250V,CEE-22 male configuration. The other end
terminates with a molded-on type connector body, rated 10A, 250V, having standard CEE-22 female
configuration.
Please note that power supply card needs to use VDE 0602, 0625, 0821 approval power cord in European
counties.
- 21 -
Chapter 3
Machine assembly
This chapter contains step-by-step procedures on how to assemble the monitor for maintenance and
trouble shooting
NOTE : 1. The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding to avoid mismatch when putting back the components.
2. Note : The monitor surface is susceptible to scratching! Therefore, lay the monitor on a soft
surface when mounting or removing the base.
3. Wear gloves.
Front View : ( unit : mm )
- 22 -
Real View :
Top View :
- 23 -
Side View : ( unit : mm )
Assembly process
Picture Description
- 24 -
1. [GET POWER/B]
2
1 2. [INSERT JUMPER IN THE APPOINTED
PLACE OF JP10 ON POWER/B]
- 25 -
1. [USE 1*PCS SCREW(M3.5*8-B) TO FIX
POWER/B AT THE APPOINTED PLACE]
- 26 -
1.[GET PANEL PROTECTIVE FILM AWAY
AND INSPECT IF PANEL IS DIRTY OR
SCRATCHED]
- 27 -
1.[STICK 1*PCS LCD MYLAR TO THE BACK
OF PANEL]
- 28 -
4. [TURN LCD]
- 29 -
1. [GET SHIELD ON THE BKT R/L AND
[INSERT LCD CABLE INTO PANEL
CONNECTOR]
- 30 -
1. [STICK 1*PCS AL FOIL ON THE
APPOINTED PLACE AS PICTURE
SHOWS]
- 31 -
1. [STICK 1*PCS AL FOIL CONNECT
PANEL AND SHIELDING]
- 32 -
1. [FETCH TRAVEL CARD, TEAR OFF 1*PCS
APPOINTED S/N FROM TRAVEL CARD
AND PASTE IT ON THE COVER]
- 33 -
1. [INSERT VGA CABLE IN VGA
CONNECTOR]
- 34 -
Chapter 4
TROUBLE SHOOTING
This chapter provides trouble shooting information forAL1716
1. No Power
No Power
OK
EC1 =5V?
R175 = 3.3V ?
OK
NO
- 35 -
2. No Characters, Missing one color
No Characters
Check CN2,CN3 No
F/W adjust
VGA,DVI Cabel?
No
OK
Re-Adjust
Check U7
Output?
OK
Check CN5 No
Change LVDS
LVDS Cable
Cable
OK
Change Panel
- 36 -
Chapter 5
Connector Information
Phonejack stereo
PIN1. AC power cord : CEE22 typed connector
PIN2. Audio cable
PIN3. Audio : Line-in receptacle
The PIN assignment of the 15 pin mini D-SUB connector / cable is as follows:
PI MNEM SIGNAL
1 RV Red Video
2 GV Green Video
3 BV Blue Video
4 NC None
5 GND Ground(DDC return)
6 RG Red GND
7 GG Green GND
8 BG Blue GND
9 +5V + 5V (for DDC)
10 SG Sync GND
11 NC None
12 SDA DDC Data
13 HS Horizontal Sync
14 VS Vertical Sync
15 SCL DDC Clock
- 37 -
The PIN assignment of the 24 pin DVI D connector / cable is as follows:
PIN Signal
1 TMDS data2-
2 TMDS data2+
3 TMDS data2 shield
4 NC
5 NC
6 DDC clock
7 DDC data
8 Not connected
9 TMDS data1-
10 TMDS data1+
11 TMDS data1 shield
12 NC
13 NC
14 +5V
15 Ground (return for +5 V and H/V
sync)
16 Hot plug detect
17 TMDS data0-
18 TMDS data0+
19 TMDS data0 shield
20 NC
21 NC
22 TMDS clock shield
23 TMDS clock+
24 TMDS clock-
- 38 -
Chapter 6
FRU (Field Replaceable Unit) list
This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of AL1511.
Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise
Authorization).
NOTE : Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date
information available on your regional web or channel(http://aicsl.acer.com.tw/spl/). For whatever
reasons a part number change is made, it will not be noted in the printed Service Guide. For
ACER-AUTHORIZED CERVICE PROVIDERS, your Acer office may have a DIFFERENT part
number code to those given in the FRU list of this printed Service Guide. You MUST use the local
FRU list provided by your regional Acer office to order FRU parts repair and service of customer
machines.
NOTE: To scrap or to return the defective parts, you should follow the local government ordinance or
regulations on how best to dispose it, or follow the rules set by your regional Acer office on how to
return it.
- 39 -
5 4 3 2 1
5DVCC
5DVCC
3 C
Chapter 7
330u/16V
0.1u/6
EC1
CN1 CONN 4x2-R
R1,L1
C1
12V
FUSE1 VCC12
0 2 1 E
1 2 1 2
3 4
220u/16V
D 5 6 D
3DVCC_1 3DVCC
0.1u/6
7 8 C4
C5
C6
0.1u/6 U1 AIC1117CY
L32 3 VIN VOUT 2 R175 0/6
FEB_0805
3DVCC RTD 3DVCC
VO 4
200/6 1%
GND
3DVCC
0.1u/6
10uF/16V
R3
3DVCC 3AVCC1
ADC_ 3AVCC
10uF/16V
+
1
+
C3
EC2
EC3
R8
R10
3PVCC RTD 3PVCC
330/6 1%
R6
0/6
10K/6
3AVCC2 LVDS_3AVCC
Q3 R13 1K/6
VRMT
MMST3906
L3
2 1 U2 AIC1117CY
10K/6 2 VIN VOUT 3
1U/6
0.1U/6
R14
GND
TO252 package
C102
C11
10K/6/NC
3DVCC
U1與U'共同layout
1
C C
R16
1K/6
R18 4.7K/6
3
C13
1U/8 Q4
SN7002E
2 VBRI SOT223 package
D1 U3 AIC1117CY 2.5DVCC_1 2.5DVCC
3 VIN VOUT 2 R176 0/6
RTD 2.5DVCC
2.5DVCC
1
1N4148 VO 4
GND
200/6 1%
DEL R173,R174; ADD D1
10uF/16V
10uF/16V
R15
0.1u/6
+
1
+
Modify
C12
EC5
EC6
200/6 1%
3DVCC NC/CX201209805/8 VCPU
R17
L27
B Q18 B
D30 D31 MMBT3906 CX201209805/8
DSUB_5V 1 3
R143
4.7K/6 2 Q19
1
3DVCC
MMBT3906
R144
4.7K/6
For layout
1
1
A A
3 3 4 4 3 3 4 4 3 3 4 4 3 3 4 4
2 2 5 5 2 2 5 5 2 2 5 5 2 2 5 5
1 1 1 1 1 1 1 1
9
8
7
6
9
8
7
6
9
8
7
6
9
8
7
6
9
8
7
6
9
8
7
6
9
8
7
6
9
8
7
6
Title
Power
Size Document Number Rev
DISPLAY B2B
- 40 -
5 4 3 2 1
16
RED-IN 75/6/F R25 100/6 C18 0.047u/6
RED-
11 1 RED+IN
6 RED-IN
DDC_SDA 12 2 GREEN+IN L9 FCB1608C-190T03/6
7 GREEN-IN GREEN+IN R26 100/6 C19 0.047u/6
GREEN+
IN-H 13 3 BLUE+IN
D 8 BLUE-IN R27 C20 D
IN-V 14 4
9 DSUB_5V 10pF
DSUB_5V
DDC_SCL 15 5 GREEN-IN 75/6/F R28 100/6 C21 0.047u/6
GREEN-
10
VGA/NC
PIN 10 VGA_CON R29 100/6 C22 0.047u/6
SOGIN
17 DDC_SCL
R30
1M/6
2
R35 C26 D34
ADC_VCC
2K/6 10P/6/NC Z3.3V
C C
1
2
D7 D8 D9
DAN217K DAN217K DAN217K IN-V R36 100/6 VGAVS AVS
2
RED+IN 3 GREEN+IN 3 BLUE+IN 3 R37 C28 D35
1
1
3DVCC
IN-H IN-V DDC_SDA DDC_SCL Bus_Power 3DVCC
2
D17
D10 D11 D12 D13
BAT54C-GS08
Z5.6 Z5.6 Z5.6 Z5.6
1
C29 0.1U/6
B B
CN4 R44 R45
U5 2K/6 2K/6
1 NC VCC 8
25 2 NC VCLK 7
1 R155 0 TX2- 3 6 R46 100/6 DDC2_SCL
RX2- R156 0 NC SCK
2 TX2+ 4 5 DDC2_SDA
RX2+ VSS SDA R47 100/6
GND 3
2
4 M24LC02
RX4- D18 D19
RX4+ 5
2
6 DDC2_SCL
SCL DDC2_SDA Z5.6 Z5.6 D22 D23
SDA 7
VS 8
Z5.6/NC Z5.6/NC
1
9 R157 0 TX1-
RX1- R158 0
1
RX1+ 10 TX1+
GND 11
2
RX3- 12
13 D20 D21
RX3+
14 Bus_Power
5V Z5.6 Z5.6
GND 15
16 R48 10K/6
HP
1
17 R159 0 TX0-
RX0- R160 0
RX0+ 18 TX0+
GND 19
RX5- 20
RX5+ 21
GND 22
A 23 R161 0 TXC+ A
RXC+ R162 0
RXC- 24 TXC-
2
D24 C30
2
C31 0.1U/6
1U/6NC Z5.6 D25 D26 D27 D28
Title
26 Z5.6 Z5.6 Z5.6 Z5.6
1
- 41 -
5 4 3 2 1
3DVCC
R3DVCC R2.5DVCC L13 FEB_0805 2.5DVCC
L12
3DVCC 2.5DVCC
FEB_0805
10uF/16V
10uF/16V
0.1u/6
0.1u/6
0.1u/6
0.1u/6
0.1u/6
0.1u/6
0.1u/6
0.1u/6
0.1u/6
0.1u/6
0.1u/6
C47
C34
C35
C36
C37
C38
C39
C40
C41
C42
C43
C44
C45
C46
0.1u/6
D C33 22pF/6 XO D
24.576MHz
R53
Y1
NC
5DVCC
120
109
121
110
127
128
C48 22pF/6 XI U6
96
84
72
57
48
95
83
71
58
49
98
69
45
97
70
44
3PVCC 5DVCC VCC12
3.3V Power
3.3V Power
3.3V Power
3.3V Power
3.3V Power
3.3V Power
3.3V Power
2.5V Power
2.5V Power
2.5V Power
2.5V Power
3.3V Ground
3.3V Ground
3.3V Ground
3.3V Ground
3.3V Ground
3.3V Ground
3.3V Ground
2.5V Ground
2.5V Ground
2.5V Ground
2.5V Ground
XO 1 113
XI XO TCON[12]/COUT/PWM2 VBRI PANEL_5_12VCC
2 XI PWM0/REFCLK 112 VOLUME
3PVCC TCON[13]/COUT/PWM2 55
L14 FEB_0805 4 DPLL_VDD
0.1u/6
5 L22 L21
APLL_VDD
FEB_1206
0.1u/6
0.1u/6
C50 + 3 108
DPLL_GND AR1N
NC
C49
C51
C52
4.7K/6
10uF/16V 106
PLL_GND AR2N/TCON[1]
6 PLL_TEST1 AR2P/TCON[5] 105
7 PLL_TEST2 AR3N/TCON[6] 104 1 3
TMDS_AVCC 103
AR3P/TCON[7]
9 TMDS_TST/PWM1 AG1N/TCON[8] 102
4.7K/6/NC
2
TX2- 15 RX2N AG2P/TCON[11] 99 2200P/6
RX1P 17 82K/6
TX1+ RX1P
NC RX1N 18
TX1- RX1N
RX0P 20 68
TX0+ RX0P BG3N
RX0N 21 67
TX0- RX0N BG3P
RXCP 23 66 R70
TXC+ RXCP BCLKN
C RXCN 24 65 D 3 C
TXC- RXCN BCLKP
R58 64
3AVCC2 TMDS_AVCC BB1N 82K/6
Near to Chip
4.7K/6
11
13
TMDS_VDD
TMDS_VDD
RTD2523 BB1P
BB2N
63
62
Q9
3
3AVCC2 19 TMDS_VDD BB2P 61 DTC144EUA
L15 FEB_0805 26 60 G 2 1 S
TMDS_VDD BB3N
0.1u/6
0.1u/6
0.1u/6
0.1u/6
C56
C57
C58
1
BLUE+ 30 B+ AG3P/TEAP 93
B- 31 92 RXEIN1-
BLUE- B- ACLKN/TEBN
SOG 33 91 RXEIN1+ GND
SOGIN SOG/ADC_TEST ACLKP/TEBP
G+ 34 90 RXEIN2-
GREEN+ G+ AB1N/TECN
G- 35 89 RXEIN2+
GREEN- G- AB1P/TECP
R+ 37 88 RXECKIN-
RED+ R+ AB2N/TECLKN
3AVCC1 ADC_VCC R- 38 87 RXECKIN+
RED- R- AB2P/TECLKP
86 RXEIN3-
AB3N/TEDN RXEIN3+
3AVCC1 29 ADC_VDD AB3P/TEDP 85
L19 FEB_0805 36 ADC_VDD CN5
22uF/16V
0.1u/6
+ 41 ADC_VDD
0.1u/6
0.1u/6
C61
C62
C63
28 ADC_REFIO BR1P/TOAP 81 3 3 4 4
80 RXOIN1- RXEIN2-
5 6 RXEIN2+
BR2N/TOBN RXOIN1+ DGND 5 6 DGND
27 ADC_GND BR2P/TOBP 79 7 7 8 8
ADC_GND 32 78 RXOIN2- RXECKIN-
9 10 RXECKIN+
TCON[4]/SDIO[1]
TCON[3]/SDIO2]
TCON[0]/VCLK
39 77 11 12
TCON[11]/V[0]
TCON[10]/V[1]
ADC_GND BR3P/TOCP 11 12
TCON[9]/V[2]
TCON[8]/V[3]
TCON[7]/V[4]
TCON[6]/V[5]
TCON[5]/V[6]
TCON[1]/V[7]
B 40 76 RXOCKIN- RXOIN0-
13 14 RXOIN0+ B
ADC_GND BG1N/TOCLKN 13 14
DDCSDA2
BG1P/TOCLKP 15 16
RESET#
125
126
114
115
116
117
118
119
122
123
124
25 26
50
54
53
52
51
56
47
46
1841 30P
RTD_SCLK
RTD_SDO/SDI
SDIO1
SDIO2
SDIO3
RTD_SCSB
R66 100/6
RESET
R71 NC
DDC_SDA
R72 NC
DDC_SCL
A A
Title
RTD2523
Size Document Number Rev
DISPLAY B2B
- 42 -
A B C D E
3DVCC
VCPU
Reset circuit C
3DVCC
R78 R79 B E
D32 R165
10K/6
NC/ 1N4148 NC/100K/6 10K/6
1
4 Q12 4
1
Q20 LED_G R82 4.7K/6 2N3906
2
2 3DVCC
NC/2N3906 VCPU
1
Q13
3
LED_R R93 4.7K/6
3
NC/1U/16V
C103 2
2N3906
NC/1U/16V
33K/6
33K/6
33K/6
33K/6
3
less R94 to CN6 pin 11
33K/6
33K/6
33K/6
C86
R87
R84
R85
R101,R103 net swap
R88
R89
R90
R91
3AVCC1
CN6
R106 MENU R95 1K/6
3AVCC1 10
NC/82K/6 SEL R96 1K/6
R147 PWR R97 1K/6 9
4.7K/6 VCPU DOWN R98 1K/6 8
UP R99 1K/6 7
RIGHT R100 1K/6 6
LEFT R101 1K/6 5
R102 220/6 4
RESET
R103 220/6 3 2.0mm pitch
2
2
+ C84 C85
Junction from 1
90° E&T
D33
0.1U/6
0.1U/6
0.1U/6
0.1U/6
0.1U/6
0.1U/6
0.1U/6
3
R166 22uF/16V 0.1u/6 A change to B 4607-11Pin 3
0/6 NC/DAN202U 4501-10-10P-R
C76
C77
C78
C79
C80
C81
C82
TO BUTTON BOARD
3
VCPU
R163
VCPU
4.7K/6 VCPU
43
44
6
5
4
8
C87 10pF/6 I1 R164 22
AVS
3 MENU
VDD3
NC
NC
VCC
HSYNC
VSYNC
P5.0 SEL
P5.1 2
12 1 PWR R110 R111 R112 R113 R114 R115
Y2 X1 P5.2 UP
P5.3 42
VCPU 11.0592MHz 41 DOWN 4.7K/6 4.7K/6 NC NC 4.7K/6 4.7K/6
C88 10pF/6 P5.4 RIGHT
11 X2 P5.5 40
34 LEFT
P5.6 R39 4.7K/6
1
7 RESET DA8/HLFHO 39
38 R40 4.7K/6
C75 R80 R81 R179 DA9/HALFV
P1.0 17 VRMT
18 R181 22 WP_EE
0.1U/6
2
KEY1
1 1
R38
KEY2 2K/6
2
6
JP3
1
5
KEY3 Title
MCU & BUTTON
Size Document Number Rev
2004/12/28 B2B
2004/12/28
DISPLAY
Date: Friday, August 12, 2005 Sheet 6 of 7
A B C D E
- 43 -
A B C D E
VCC12
R128
1K/6/NC
R1313.9K/6/NC
4 4
1U/8
SN7002E/NC
C89
VOLUME 2
Q15
1
3 C
AGND
B 2 1 E VCC12
L24
BEAD/1206/NC
330U/16V/NC
0.1U/6/NC
U9
15
16
AGND
VS
VS
J3 1 Z0412 L25 600/CX601T02001/NC
5 L_LINE 1 2 Z0415 R132 100/6/NC LIN_PC C92 0.47U/8/NC 4
3 INL C93 SPKOUTL 3
4 OUTL 17
3 330U/16V/NC
2 R_LINE 1 2 Z0416 R133 100/6/NC RIN_PC C94 0.47U/8/NC 9 5
ZD005D100/NC L26 600/CX601T02001/NC INR VAROUT_L JP2
VCC12
R134 CX201209805/8/NC 1
2
220P/6/NC
VOLUME 6 4
20K/6/NC
20K/6/NC
R136
C95
C96
R138
10K/6/NC 4606-04-04P-R/NC
11 STBY VAROUR_R 7
GND
GND
GND
GND
GND
GND
GND
SVR
MUTE MUTE 2 Q16
0.1U/8/NC
330U/16V/NC
13
18
19
20
C98
TDA7496L/NC
1
2
3
C99
DTC144EUA/NC AGND
L23 BEAD/1206/NC
1
VCC12
AGND
AGND AGND
R140 10K/6/NC R141 10K/6/NC
2 2
3
STBY 2 Q17
STBY
DTC144EUA/NC
1
AGND
1 1
Title
AUDIO
Size Document Number Rev
DISPLAY B2B
- 44 -
1 2 3 4 5 6 7 8
VCC
Vin
R2
C7 C24
GND
G
D D
R5 C5
D S
ON/OFF C31
Q1
C35 LV1
IC_VCC IC_VCC D15
R41
CN1
R6
R40 R9 R10
1
R12 R13 FB1 2
Q3 R7 C6 U1
DBRT C25 C29 C32
R11 14 23
C8 R19 LOK BTL LV2
13 22 C30 T1
ENSYNC PRL CN2
U2 6.7 8
12 25 3 6
ABRT OUTL S2 D2 1
FB2 2
11 24 4 5
DBRT UGL C27 G2 D2
C36
10 26 1 8 1
BRS VCCL S1 D1
5
9 27 2 7
BRC LGL G1 D1
8 28 CN3
LCC PGL C26
C 1 C
7 16 2.3 4
LCS BTR FB3 2
6 15 C33
FT PRR
R1 R3 R4 U3 LV3
C1 C2 C4 C3 C18
5
AG OUTR
18 3
S2 D2
6
C21
4 17 4 5
COMP UGR C28 G2 D2 CN4
C37
3 19 1 8
LV VCCR S1 D1 1
FB4 2
2 20 2 7
LI LGR G1 D1 C34
LV1 D9 C19 C20
1 21
SI PGR LV4
D1
R8
C14
LI D10 D12
LV2
R38 R39 R20
B D2 (1206) B
C9 R34 C11 R36
R15 R16 JP10
21
14
C15 D5 D7
R26 R30
24
33
FB1 FB3
R21 R23
LI LI
LV3
R17
IC_VCC R27 R31
D11 D13
D3
Q2 C22
D
C17
1 2 3 4 5 6 7 8
1 2 3 4
F101
CN100 TH101 LF102 C260
LF101
1 2 2 1
L INVERTER
3
D BD101 R260 D
R101
C261 C263 F260
R112
CY101
T101 +12V
VA101
C114 1
FG R102 2 1
CX101
+12V/0.4A
+ 7.8
+ +
ZD260 C264
R262
C115
D260
N 4 3 3 4
ZD110
4
R264
CY102 R113
3
CY104
D110
R121 R120
C D240 C
U101 L240
F240 +5.2V
11.12
+5.2V/3.5A
6 1 + +
Vstr Drain C235
R241
C243
5 C242
N.C R240 + +
D120 L120 R235
2 5 C240
GND
4
C241
C244
Vfb
RTN
6 9.10
3
Vcc
R230
R234
ZD120
+ PC201A
4
1
B PC201B B
C123 ZD121
C120 R231
C231
R232
3
K2
R
IC230 R233
A
CY103
A A
1 2 3 4
Chapter 8
Power Board Information
AS05B520207 ADP/INV,SLS0532D0248,90~264V,REV1A GP
- 45 -
When the lamp current
value is 7.5mA, the
jumper should be done
as the picture left shows
圖1
When the lamp current
value is 7.0mA, the
jumper should be done
as the picture left shows
圖2
圖3
- 46 -