CONVENTIONAL DETECTOR BASES

NS6 AND NS4 SERIES BASE

The NS6 and NS4 series bases are designed specifically for use with
Hochiki’s conventional models:
 Photoelectric smoke detectors: SOC-24V, SOC-24VN, SLR-24V,
SLV-24, SLV-24N, SLV-24V, SLR-835, SLR-24H
 Photoelectric with heat smoke detector: SLR-835H
 Fixed temperature/rate-of-rise heat detector: DCD-135/190
The NS6 base is an electronics free 6" base featuring a plastic tam-
NS Series Bases Alarm Current ID per-lock lug. Each base is equipped with a resistor. Please refer to
the chart (left) for additional specifications. The NS4 base is a 4"
NS6-224 OR NS4-224 43mA (70mA @ 33.0V MAX) HB-5 version of the NS6 base.

NS6-220 OR NS4-220 93mA (136mA @ 33.0V MAX) HB-3 Models HSC-224R, HSC-220R and the HSC-221R are designed
specifically for use with the Hochiki conventional models SOC-24V,
NS6-221 OR NS4-221 46mA (77mA @ 33.0V MAX) HB-4
SOC-24VN, SLR-24H, SLR-24V, SLV-24, SLV-24N, SLV-24V, SLR-
835, SLR-835H, DCD-135/190. The HSC-(X)R series is a 6" base
with two sets of Form "C" relay contacts.
NS6-100* OR NS4-100* 150mA @ 15.0-33.0V MAX HB-55
Models HSC-224R, HSC-220R and the HSC-221R are also approved
* Requires external current limiting to 150mA maximum for use with Hochiki’s previous conventional model DFE 135/190.

HSC-(X)R RELAY BASE & HSC- 4R 4 WIRE BASE The HSC-4R is designed specifically for 24 volt 4 wire applications
using Hochiki conventional models SOC-24V, SOC-24VN, SLR-24H,
SLR-24V, SLV-24, SLV-24N, SLV-24V, SLR-835, SLR-835H or
DCD-135/190. The 6" diameter base is current limited. Relay contact
place a direct short circuit across the loop when the detector is actu-
ated.
Model HSC-4R is also approved for use with Hochiki’s previous
conventional model DFE 135/190.
The HSC-L base series are designed specifically for use with the
Hochiki fixed temperature heat detectors (models DFE-135/190).
2 Wire Auxiliary Relay
Alarm Current ID
Bases The HSC-L series is a 6" base featuring a current limiting resistor,
latching annunciator output and a latching circuit so the alarm LED
HSC-224R 43mA (58mA @ 30.0V MAX) HB-73
will remain lit until the control panel has been reset.
HSC-220R 88mA (98mA @ 26.5V MAX) HB-72 Bases are available in bone or white to match the detector. Bone (off-
white) is the standard color for detectors and bases for most applica-
HSC-221R 49mA (62mA @ 30.0V MAX) HB-71 tions.

4 Wire Base Alarm Current ID

BOX MOUNTING
HSC-4R 43mA (58mA @ 30.0V MAX) N/A BASE
3" OCT 4" OCT 4" SQR

HSC-(X) L LATCHING LED BASE NS4-BASE YES NO NO

NS6-BASE NO YES YES

HSC-BASE NO YES YES

PRODUCT LISTINGS

2 Wire Latching Alarm Current ID California State

Fire Marshal
HSC-224L 35-42mA @ 24V (54mA MAX) HB-62 7300-0410-0132
S1383 1D5A1, A4
67-80mA @ 24V
HSC-220L HB-64
(88.5mA @ 26.5V DC MAX)
We try to keep our product information up-to-date and accurate. However, we
HSC-221L 37-45mA @ 24V (57mA MAX) HB-63 cannot cover all specifications or anticipate all requirements. For additional
information contact your local distributor or Hochiki America Corporation.

Hochiki America Corporation Find latest revision at www.hochiki.com

7051 Village Drive, Suite 100, Buena Park, CA 90621-2268
Phone: 714-522-2246 Fax: 714-522-2268
Technical Support: 800-845-6692 or technicalsupport@hochiki.com F0014 Rev.1 08/2017
 CONVENTIONAL DETECTOR BASES
NS4 AND NS6 SERIES BASE
2-WIRE OPERATION
UL LISTED
CONTROL 4 3 1 2 LISTED
PANEL 1 END OF LINE
4
2 DEVICE
6 5
6 5
PANEL Resistor shown is for example
POWER only. Not all annunciators
have in line resistance. NOTE:  WIRING TERMINALS FOR THE NS4
SUPPLY 3 AND NS6 ARE IDENTICAL
NEGATIVE  BASES ARE AVAILABLE IN BONE OR
NS4 SERIES
NS6 SERIES WHITE TO MATCH THE DETECTOR.
BONE (OFF WHITE) IS THE STANDARD
Annunciation device must be current limited to 20 mA @ 24VDC
COLOR FOR DETECTORS AND BASES
Maximum. Not limiting current could result in damage to the
detector or cause a no alarm condition.
FOR MOST APPLICATIONS.

HSC-(X)R RELAY BASE  BASES WITH THE “W” SUFFIX ARE

WHITE IN COLOR
2-WIRE OPERATION

UL LISTED
CONTROL LISTED
END OF LINE
PANEL L4 L4 DEVICE
H2 H2
L3 L3 GRY PIGTAIL AUXILLIARY
S1 S1 BLU
S2
H1
S2
H1 GRN CONTACTS
YEL
ORN TWO FORM “C”
PUR
L1 L1
L2 L2 RELAYS SHOWN WITH POWER OFF.
HSC-(X) R SERIES Relay Contact Ratings: 2A @ 30VDC
1A @ 120VAC
HSC-4R FOUR WIRE BASE
4-WIRE OPERATION

LISTED
INITIATING END OF LINE
DEVICE
CIRCUIT H1 H1,H2 - TERMINAL
H2
PIGTAIL AUXILLIARY
YEL
ORN
CONTACTS ONE
PUR FORM “C”

LISTED Relay Contact Ratings: 2A @ 30VDC

L3 END OF LINE 1A @ 120VAC
UL LISTED L4 L4 RELAY
HA-EOLR-24
POWER H2 H2
SUPPLY L3
24VDC S1 H1 S1 H1
S2 S2

L1 L1
L2 L2

HSC-4R
HSC-(X) L LATCHING LED BASE
2-WIRE OPERATION

1 2
L4 4
UL LISTED
H2
CONTROL L3 6 5
PANEL S1 LISTED
S2
H1 END OF LINE
DEVICE
3
PANEL L1
POWER L2 PIG TAIL LEAD
SUPPLY
NEGATIVE HSC-(X) L SERIES NS6 SERIES

We try to keep our product information up-to-date and accurate. However, we cannot cover all specifications or anticipate all requirements.
For additional information contact your local distributor or Hochiki America Corporation.

Hochiki America Corporation Conventional Detectors Bases Specifications subject to change without notice.