Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 51 views

    Fire Alarm Systems - W ST Wall Mount Multi Candela Strobes

    Uploaded by

    Paola Lopez

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fire Alarm Systems - W ST Wall Mount Multi Candela Strobes

    Uploaded by

    Paola Lopez
    51 views3 pages

    Original Title

    LUZ_ESTROBOSCOPICA_MURO_W_ST

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    51 views3 pages

    Fire Alarm Systems - W ST Wall Mount Multi Candela Strobes

    Uploaded by

    Paola Lopez

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Fire Alarm Systems | W‑ST Wall‑mount Multi‑candela Strobes

    W‑ST Wall‑mount Multi‑candela Strobes


    www.boschsecurity.com

    u Sleek modern aesthetics

    u Multiple voltages (12 VDC or 24 VDC)

    u Voltage test points

    u Eight strobe candela options

    u Universal mounting base

    The Cooper Wheelock Exceder Series Strobes feature Region Certification


    a sleek modern design that incorporates high reliability
    and high-efficiency optics to minimize current draw. USA UL UUKC: Signaling Appliances and Equip-
    ment for the Hearing Impaired (ANSI/UL
    The reduced current draw allows for a greater number 1971), UVAV: Visual-signal Appliances
    of devices on the two‑wire notification appliance for Fire-protective Signaling Systems
    circuit. This, in combination with eight candela options (ANSI/UL 1638)
    in one appliance, no tools needed for changing FM see the FM Approval Guide
    settings, voltage test points, 12 V or 24 V DC
    operation, the universal mounting base, and multiple CSFM see our website
    mounting options results in a reduced cost of
    ownership. Installation/configuration notes
    These strobes provide eight candela settings. All the Compatibility
    switches to change these settings can be set without a Strobe:
    tool and are located behind the appliance to prevent These strobes provide a non-synchronized strobe
    tampering. appliance when connected directly to a Fire Alarm
    The separate universal mounting base can be easily Control Panel (FACP), or provide a synchronized
    mounted to five industry‑standard back box types. strobe appliance when used in conjunction with an
    They can also be pre‑wired to allow full testing of the FACP that incorporates the Cooper Notification sync
    circuit wiring before the appliance is installed and the protocol, a Cooper Notification Sync Module, or the
    surface finished. These wall‑mounting strobes also Cooper Notification Power Supply. They are designed
    feature voltage test points for taking readings with a to flash at 1 flash per second minimum over their
    volt meter for troubleshooting or AHJ inspection. Regulated Voltage Range.
    Certifications and approvals

    Cooper Wheelock holds these Listings and Approvals:


    2 | W‑ST Wall‑mount Multi‑candela Strobes

    Wiring Considerations
    Notice The wiring terminals on the Universal Mounting Base
    Strobes are not designed to be used on coded accept two appliance wires with diameters between
    systems in which the applied voltage is cycled on 12 AWG and 18 AWG (ISO 4 mm2 and 0.75 mm2) at
    and off. each terminal.
    Compatible Products Parts included
    The following Bosch Security Systems, Inc. products
    are compatible with the Cooper Wheelock Exceder Quant. Component
    Series Strobes:
    1 Strobe appliance
    Category Product ID Product Description
    1 Universal mounting base
    Control Panels FPA-10001 Analog Addressable Fire
    1 Contact cover
    Panels
    1 Hardware pack
    FPD-70241 Conventional or
    • Two pan head mounting screws
    Addressable2 FACP
    • One securing screw
    D10024A3 Analog FACP
    1 Literature – Installation Instructions
    D80243 Analog FACP
    Technical specifications
    D91243 Addressable FACP
    Electrical
    D7024 3 Conventional or
    Addressable2 FACP Strobe Current Draw
    D70223 Conventional FACP 24 V nominal (16.0 V to 33.0 V range)
    Modules SM‑12/24‑R Synchronization module
    Voltage Type Current Draw
    (red)
    DC/FWR: 15 cd: 57 mA, 15/75 cd: 70 mA,
    DSM‑12/24‑R Dual synchronization
    30 cd: 85 mA, 75 cd: 135 mA,
    module (red)
    95 cd: 163 mA, 110 cd: 182 mA,
    Power Supplies FPP-RNAC-8A-4C1 Remote Notification 135 cd: 205 mA, 185 cd: 253 mA
    Appliance Circuit (RNAC)
    12 V nominal (8.0 V to 17.5 V range)
    Power Supply

    PS‑24‑8MC1 Power supply with built-in Voltage Type Current Draw


    synchronization protocol DC: 15 cd: 110 mA, 15/75 cd: 140 mA
    1
    These products have built‑in Cooper Notification
    Voltage (input)
    synch protocol.
    2
    When used with a D7039 Multiplex Expansion Regulated Range
    Module, the FPD‑7024 and D7024 become
    addressable FACPs. 12 VDC 8.0 V to 17.5 V
    3
    For synchronization, use the SM or DSM modules 24 VDC or Vrms 16.0 V to 33.0 V
    with these control panels.
    Mounting Considerations Environmental
    The Universal Mounting Base supplied with each
    Environment: Indoor, dry
    strobe can be pre-wired. With the supplied Contact
    Cover in place, the pre‑wired circuit can be checked Relative Humidity: 93±2% maximum, non‑condensing
    for continuity before the strobes are mounted. The
    strobes snap onto the pre-installed Universal Mounting Temperature +32°F to +120°F (0°C to +49°C)
    Bases with the Contact Covers removed and can be (operating):
    secured to the base with an optional securing screw.
    The Universal Mounting Base flush mounts on single-
    gang, double-gang, 4 in. square, 4 in. octal, 3.5 in.
    octal and 100 mm European-type back boxes.
    3 | W‑ST Wall‑mount Multi‑candela Strobes

    Mechanical

    Candela Ratings1: 15 cd, 15/75 cd2, 30 cd, 75 cd, 95 cd,


    110 cd, 135 cd, or 185 cd

    Dimensions: 5.24 in. x 4.58 in. x 2.19 in.


    (133.1 mm x 116.4 mm x 55.7 mm)

    Material: Molded plastic enclosure incorporating a


    Xenon flashtube and Lexan lens.
    1
    When set for 12 V operation strobe devices are only
    approved by UL to be set at 15 cd or 15/75 cd and
    only to be powered by DC not FWR.
    2
    Although this product is UL Listed at 15 cd, it
    provides 75 cd on axis.
    Trademarks
    All hardware and software product names used in this
    document are likely to be registered trademarks and
    must be treated accordingly.

    Ordering information

    W‑STR Wall‑mount Multi‑candela Strobe (two‑wire,


    12/24 V, red)
    Rectangular red two‑wire strobe that is field‑selectable
    for eight candela options.
    Order number W-STR

    W‑STW Wall‑mount Multi‑candela Strobe (two‑wire,


    12/24 V, white)
    Rectangular white two‑wire strobe that is
    field‑selectable for eight candela options.
    Order number W-STW
    Accessories
    DSM‑12/24‑R Dual Synchronization Module (red)
    A 12/24 VDC Cooper Wheelock module that
    synchronizes notification appliances on a single Class
    A or two Class B circuits.
    Order number DSM-12/24-R

    SM‑12/24‑R Single Synchronization Module (red)


    A 12/24 VDC Cooper Wheelock module that
    synchronizes notification appliances on Class B alarm
    circuits.
    Not Available.
    Order number SM‑12/24‑R

    Represented by:

    Europe, Middle East, Africa: Germany: North America: Asia-Pacific:


    Bosch Security Systems B.V. Bosch Sicherheitssysteme GmbH Bosch Security Systems, Inc. Robert Bosch (SEA) Pte Ltd, Security Systems
    P.O. Box 80002 Robert-Bosch-Ring 5 130 Perinton Parkway 11 Bishan Street 21
    5600 JB Eindhoven, The Netherlands 85630 Grasbrunn Fairport, New York, 14450, USA Singapore 573943
    Phone: + 31 40 2577 284 Germany Phone: +1 800 289 0096 Phone: +65 6571 2808
    emea.securitysystems@bosch.com www.boschsecurity.com Fax: +1 585 223 9180 Fax: +65 6571 2699
    emea.boschsecurity.com onlinehelp@us.bosch.com apr.securitysystems@bosch.com
    www.boschsecurity.us www.boschsecurity.asia

    © Bosch Security Systems 2016 | Data subject to change without notice


    2713864203 | en, V6, 11. Aug 2016

    You might also like