1 Motor 2 e

Products | Solutions | Service
Electric Motors Chapter 1

Lönne Group
The Lönne Group was founded in 1949 in Bergen and the present owner and
Chairman of the Board,
Terje Lönne took over the company in 1968. Since then the company specialized in
Electric Motors,
Gear Boxes, Transmissions and Bearings, and step by step became a leading Nordic
supplier within drive technology.
Besides still being a total supplier of high quality components, Lönne has developed
the business areas into enigneered
solutions and service. The competence is organized to serve all the Nordic countries
locally, at the same time as Lönne
keep up the strong reputation as an internationally experienced supplier of instant
and effective service
world wide.
Lönne Quality Management System Standards is certified for ISO 9001:2008
For further information, please have a look at our website or feel free to call us!
Certificates
Lönne motors can be delivered with following certificates according to EN 10204
Type 2.1: Declaration of compliance with the order
Document in which the manufacturer declares that the products supplied are in
compliance with the requirements of the order, without inclusion of test results.
Type 2.2: Test report

Document in which the manufacturer declares that the products supplied are in
compliance with the requirements of the order and in which he supplies test results
based
on non- specific inspection.
Type 3.1: Inspection certificate

Document issued by the manufacturer in which he declares that the products supplied
are in compliance with the requirements of the order and in which he supplies test
results.
The test unit and the tests to be carried out are defined by the product specification,
the
official regulation and corresponding rules and/ or the order.
The document is validated by the manufacturer’s authorized inspection
representative,
independent of the manufacturing department.
Type 3.2: Inspection certificate

Document prepared by both the manufacturer’s authorized inspection representative,
independent of the manufacturing department and either the purchaser’s authorized
inspection representative or the inspector designated by the official regulations and in
which they declare that the products supplied are in compliance with the requirements
of
the order and in which test results are supplied.
The motors will be tested in our own test field in Helsingborg or at an external institute.
For classified inspection report will the surveyor be appointed by ourselves or by our
clients.
Marine Classifications:
The most common Marine Classification Bureaus are: Det Norske Veritas,
Lloyd's Register of Shipping,ABS, Bureau Veritas, Germanisher Lloyd,
China Classification Society, Nippon Kaiji Kyokai.
Type Approval Certificates for Maritime Sector, please see page 47.
2
Index
Page
New ecodesign requirements for electric motors 4

Globally applicable standards and legal requirements 5
Energy saving motors 2 Pole / 4 Pole 6
Energy saving motors 6 Pole / 8 Pole 7
2 Pole 3000 / 3600 RPM 8
4 Pole 1500 / 1800 RPM 9
6 Pole 1000 / 1200 RPM 10
8 Pole 750 / 900 RPM 11
2- speed 2/4 Pole 1500/3000 - 1800/3600RPM 12
2- speed 4/6 Pole1000/1500 - 1200/1500RPM 13
2- speed 4/8 Pole750/1500 - 900/1800RPM 14
Lönne Electric Motors 15
Dimensions Shaft / Flanges 16
Illustrations Shaft / Flanges 17
Overall Dimensions Illustration 7AA, 7BA, 14BG 18
Overall Dimensions 7AA, 7BA, 14BG 19
Overall Dimensions Illustration 9AA, 1TZ9, 16BG 20
Overall Dimensions 9AA, 1TZ9, 16BG 21
Single Phase Motors, Fan, Pump- Drive 22
Single Phase Motors, Constant Torque 23
Mounting Options 24
Spare Part Illustration 25
Terminal Marking / Connections 26
Brakes, Design and Mode of Operation 27
External Cooling Unit, Data and Dimensions 28
Design, Painting Colours , Balance and Vibration Severity 29
Bearing and Lubrication 30
Degree of Protection 31
Insulation System 32
Ambient Temperature and Humidity 33
Motor Protection and Anti Condensation Heaters 34
Technical Information Noise Level 35
Safety and Commissioning for Low Voltage Asynchronous Motors 36
Optimal, Energy Saving Operations by Frequency Inverters 38
Flameproof Motors Ex d, Ex de IIB, IIC 39
Type Approval DNV 40
Appendix 41
3
New Ecodesign Requirements for Electric Motors

Implementing Directive2005/32/ EC of the European Parliament and of the Council
Electric motors are the most important type of electric load in New Efficiency Classes
industries within the Community where motors are used in the Different energy efficiency standard exists worldwide for
prosuction process. The systems in which these motors are asynchronous motors. To promote international harmonization, the
operated account for tabout 70% of the electricity consumed by international standard IEC 60034-30:2008 (Rotating electrical
the industry. There is a total potential for cost- effective machines- Part 30:Efficiency classes of single speed, three phase,
improvement of the energy efficiency of these motor systems by case- induction motors (IE code)) was created. This groups low-
about 20% to 30%. One of the major factors in such improvements voltage asynchronous motors into new efficiency classes (Valid
is the use of energy efficient motors. Concequently, motors in since October 2008). The Efficiency of IEC 60034-30:2008 are
electric motor systems represent a priority product for which based on losses determined in accordance with IEC
ecodesign requirements should be established. 60034-2-2:2007 standard. this has been valid since November 2007
and will replace the previous standard IEC 60034-2:1996 as of
Lönne has a long record of successful solutions within drive and November 2010. The supplementary losses are now measured and
motion technology. no longer added as percentage.
New standard classes for efficiencie

A new nomenclature applies to the new efficiency classes
(IE= International Efficiency):
IE1 (Standard Efficiency)
The following table shows examples of the efficiency values IE2 (High Efficiency
according to the new and old lossescalculating the methods. IE3 (Premium Efficicency)
IE1 to IE3 efficiences 4- pole 50 Hz New Efficiency Classes
New measuring method according to IEC 60034-2-1:2007
With the new measuring method, the supplementary losses are no longer applied as percentage (0,4%), but instead they are determined with
measurements (IEC 60034-2-1:2007). The nominal effeciencies are therefore reduced from EFF1 to IE2 and from EFF2 to IE1, even though there
have been no technical or physicl changes to motors.
Previosly: PLL = 0,5% ofP added

Now: PLL = Individual measurement
PLL = load- dependent supplementary losses
EFF measuring method Losses determined Losses determined

(incl. percentage losses) according to according to
EN/ IEC 600034-2: 1996 50 Hz IEC 60034-2-1: 2007 50 Hz IEC 60034-2-1:2007 60 Hz
5.5 kW 4- pole 87.7 89.5 89.5
45 kW 4- pole 93.9 93.1 93.6
110 kW 4- pole Not defined 94.5 95.0
Background information .
The EuP directive (Energy Using Products) is implemented in the national laws of EU memeber countries. The framework conditions for the
European directives have already been agreed. EU Directive 2005/32/ EC (=EuP Directive) is based on IEC 60034-30:2008 with regard to the
minimum efficiency values.This directive is implemented in European countries under a form of Energy Using Product Directive.
4
Globally applicable standards and legal requirements
5
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 2- Pole and 4- Pole Motors
Type Output RPM Torque. Amp. Eff. Efficiency η [%] Kg
kW kW 50Hz 60Hz Nm 50Hz 60Hz class. 100%load 75%load cos φ

IM 1001
50Hz 60 hz 400V 460V 50Hz 400V 460V 50Hz 50Hz 50Hz 50Hz
2- Pole Motors
9AA 80M02K 0,75 0,86 2870 3444 2,5 1,71 1,71 IE2 77,4 77,4 0,82 9,8
9AA 80M02 1,1 1,3 2860 3432 3,7 2,25 2,25 IE2 79,6 79,6 0,89 12,3
9AA 090S02 1,5 1,75 2890 3468 5 3,05 3,05 IE2 81,3 81,3 0,87 15
9AA 90L02 2,2 2,55 2890 3468 7 4,4 4,4 IE2 83,2 83,2 0,87 18,6
1TZ9 A 100L-2 3 3,45 2905 3486 10 6,1 6,1 IE2 84,6 85 0,84 21
1TZ9 A 100L-2 a) 4 4,6 2905 3486 13 7,8 7,8 IE2 85,8 86,3 0,86 26
1TZ9 A 112M-2 4 4,6 2950 3540 13 7,8 7,8 IE2 85,8 86 0,86 27
1TZ9 A 112M-2 a) 5,5 6,3 2950 3540 18 10,3 10,3 IE2 87 86,7 0,89 34
1TZ9 A 132S-2 5,5 6,3 2950 3540 18 10,4 10,4 IE2 87 87,5 0,87 39
1TZ9 A 132S-2 7,5 8,6 2950 3540 24 14,2 14,2 IE2 88,1 88,6 0,87 43
1TZ9 A 132M-2 a) 11 12,6 2955 3546 36 20 20 IE2 89,4 90 0,89 57
1TZ9 A 160M-2 11 12,6 2955 3546 36 20,5 20,5 IE2 89,4 89,5 0,87 67
1TZ9 A 160M-2 15 17,3 2945 3534 48 27 27 IE2 90,3 90,3 0,88 75
1TZ9 A 160L-2 18,5 21,3 2955 3546 60 33,5 33,5 IE2 90,9 91,2 0,88 84
1TZ9 A 160L-2 a) 22 25,3 2955 3546 71 39 39 IE2 91,3 91,7 0,89 94
16BG 183-2MA-- 22 24,5 2955 3555 71 39,5 38,5 IE2 91,3 92 0,88 170
16BG 206-2MA-- 30 33,5 2960 3560 97 53,5 52 IE2 92 92,1 0,88 220
16BG 207-2MA-- 37 41,5 2960 3560 119 65 63 IE2 92,5 92,7 0,89 250
16BG 223-2MA-- 45 51 2965 3565 145 79 78 IE2 92,9 92,9 0,88 300
16BG 253-2MB-- 55 62 2970 3570 177 96 94 IE2 93,2 93,3 0,89 380
16BG 280-2MB-- 75 84 2978 3578 241 133 128 IE2 93,8 93,5 0,87 500
16BG 283-2MB-- 90 101 2975 3575 289 157 151 IE2 94,1 94 0,88 570
16BG 310-2MB-- 110 123 2982 3582 352 187 184 IE2 94,3 94,2 0,9 750
16BG 313-2MB-- 132 148 2982 3582 423 220 215 IE2 94,6 94,5 0,91 915
16BG 316-2MB-- 160 184 2982 3580 512 265 260 IE2 94,8 94,9 0,92 960
16BG 317-2MB-- 200 224 2982 3580 640 330 320 IE2 95 95,2 0,92 1200
16BG 318 - 2MB 250 280 2986 3585 800 415 400 IE2 95 94,9 0,91 1280
16BG 312 - 2MA 315 353 2986 3586 1007 540 515 IE2 95 94,7 0,89 1355
kW kW 50Hz 60Hz Nm 50Hz 60Hz class. 100%load 75%load cos φ
4- Pole Motors 50Hz 60 hz 400V 460V 50Hz 400V 460V 50Hz 50Hz 50Hz 50Hz
IM 1001
9AA 8M04 0,75 0,86 1440 1728 5,1 1,81 1,8 IE2 79,6 79,6 0,75 12,3
9AA 90S04 1,1 1,3 1440 1728 7,3 2,55 2,55 IE2 81,4 81,4 0,77 15
9AA 90L04 1,5 1,75 1440 1728 9,9 3,4 3,4 IE2 82,8 82,8 0,77 18
1TZ9 A 100L-4 2,2 2,55 1455 1746 14 4,65 4,65 IE2 84,3 84,6 0,81 21
1TZ9 A 100L-4 3 3,45 1455 1746 20 6,2 6,2 IE2 85,5 85,9 0,82 25
1TZ9 A 100L-4 a) 4 4,6 1460 1752 26 8,3 8,3 IE2 86,6 86,6 0,8 30
1TZ9 A 112M-4 4 4,6 1460 1752 29 8,2 8,2 IE2 86,6 86,7 0,81 29
1TZ9 A 112M-4 a) 5,5 6,3 1460 1752 36 11,2 11,2 IE2 87,7 87,7 0,81 34
1TZ9 A 132S-4 a) 5,5 6,3 1465 1758 36 11,4 11,4 IE2 87,7 87,9 0,8 42
1TZ9 A 132M-4 7,5 8,6 1465 1758 49 14,8 14,8 IE2 88,7 89,2 0,83 49
1TZ9 A 132M-4 a) 11 12,6 1465 1758 72 21 21 IE2 89,8 89,8 0,84 64
1TZ9 A 160M-4 11 12,6 1470 1764 71 21 21 IE2 89,8 90,3 0,85 71
1TZ9 A 160L-4 15 17,3 1475 1770 97 28 28 IE2 90,6 90,8 0,85 83
1TZ9 A 160L-4 a) 18,5 17,3 1475 1770 120 34,5 34,5 IE2 91,2 91,2 0,85 100
16BG 183-4- MA-- 18,5 21,3 1470 1770 120 35,5 35 IE2 91,2 91,5 0,83 160
16BG 186-4MA-- 22 25,3 1465 1770 143 41,5 41 IE2 91,6 92 0,84 185
16BG 207-4MA-- 30 34,5 1475 1770 195 55 55 IE2 92,3 92,8 0,85 225
16BG 220-4MA-- 37 42,5 1470 1770 240 66 65,5 IE2 92,7 93,6 0,87 285
16BG 223-4MA-- 45 52 1475 1775 291 80 80 IE2 93,1 93,6 0,87 315
16BG 253-4MA-- 55 63 1480 1780 355 100 99 IE2 93,5 93,7 0,85 390
16BG 280-4MB-- 75 86 1485 1785 482 132 130 IE2 94 94,3 0,87 560
16BG 283-4MB-- 90 104 1486 1785 578 159 158 IE2 94,2 94,6 0,87 640
16BG 310-4MB-- 110 127 1490 1788 705 195 195 IE2 94,5 94,6 0,86 750
16BG 313-4MB-- 132 152 1488 1788 847 230 231 IE2 94,7 94,9 0,87 870
16BG 316-4MB-- 160 184 1488 1788 1027 280 275 IE2 94,9 95,2 0,87 950
16BG 317-4MB 200 230 1490 1788 1282 350 348 IE2 95,1 95,3 0,87 1120
16BG 328-4- MA 250 288 1488 1788 1605 435 430 IE2 95,1 95,2 0,87 1290
16BG 312-4MA 315 362 1488 1788 2022 560 550 IE2 95,1 94,9 0,86 1500
Additional data for 60Hz on request. Other Sizes and Voltages on request.
a) Increased rated output.
400
Formula for current with new voltage: I'n (new) = In (with 400V) •
U (new voltage)
6
Energy- saving motors with "high efficiency" IE2 according to IEC 60034-30
Technical data for standard execution, S1- duty, IP55, 6- Pole and 8- Pole Motors
Type Output RPM Torque. Amp. Eff. Efficiency ? [%] Kg

kW kW 50Hz 60Hz NM 50Hz 60Hz class. 100%load 75% Load cos ph ? IM 1001
50Hz 60Hz 400V 460V 50Hz 400V 460V 50Hz 50Hz 50Hz 50Hz
6- Pole Motors
9AA 90S06 0,75 0,86 925 1110 7,7 1,98 1,98 IE2 75,9 75,9 0,72 15,7
9AA 90L06 1,1 1,3 940 1128 11 2,9 2,9 IE2 78,1 78,1 0,7 19
1TZ9 A 100L-6 1,5 1,75 970 1164 15 3,7 3,7 IE2 79,8 79,8 0,73 25
1TZ9 A 100L-6 a) 2,2 2,55 965 1158 22 5,1 5,1 IE2 81,8 82,5 0,76 30
1TZ9 A 112M-6 2,2 2,55 965 1158 22 5,2 5,2 IE2 81,8 81,8 0,75 29
1TZ9 A 112M-6 a) 3 3,45 960 1152 30 6,6 6,6 IE2 83,3 83,4 0,79 34
1TZ9 A 132S-6 3 3,45 970 1164 30 7 7 IE2 83,3 83,3 0,74 38
1TZ9 A 132M-6 4 4,6 970 1164 39 8,7 8,7 IE2 84,6 84,6 0,78 43
1TZ9 A 132M-6 5,5 6,3 970 1164 54 12 12 IE2 86 86 0,77 52
1TZ9 A 132M-6 a) 7,5 8,6 970 1164 74 16,1 16,1 IE2 87,2 87,2 0,77 64
1TZ9 A 160M-6 7,5 8,6 975 1170 73 16,2 16,2 IE2 87,2 87,5 0,77 77
1TZ9 A 160L-6 11 12,6 975 1170 108 22,5 22,5 IE2 88,7 88,4 0,8 93
1TZ9 A 160L-6 a) 15 17,3 975 1170 147 30 30 IE2 89,7 89,9 0,81 115
16BG 186-6AA-- 15 18 975 1170 147 30 30 IE2 89,7 90,5 0,81 175
16BG 206-6AA-- 18,5 22 978 1174 181 36,5 36,5 IE2 90,4 91 0,81 210
16BG 207-6AA-- 22 26,5 978 1174 215 42,5 42,5 IE2 90,9 91,5 0,82 240
16BG 223-6AA-- 30 36 980 1176 292 57 57 IE2 91,7 92,2 0,83 325
16BG 253-6AA-- 37 44,5 980 1176 359 70 70 IE2 92,2 92,6 0,83 405
16BG 280-6AA-- 45 54 985 1182 435 82 82 IE2 92,7 92,9 0,85 420
16BG 283-6AB-- 55 66 988 1186 532 100 100 IE2 93,1 93,3 0,85 570
16BG 310-6AB-- 75 90 990 1188 723 139 139 IE2 93,7 93,7 0,83 760
16BG 313-6AB-- 90 108 990 1188 868 163 163 IE2 94 94,1 0,85 935
16BG 316-6AB-- 110 132 990 1188 1061 198 198 IE2 94,3 94,4 0,85 1010
16BG 317-6AB-- 132 158 990 1188 1273 235 235 IE2 94,6 94,6 0,85 1180
16BG 318-6AB-- 160 192 990 1188 1543 285 285 IE2 94,8 94,9 0,86 1245
16BG 312-6- MA 200 240 990 1190 1929 365 365 IE2 95 95,15 0,83 1395
Type Output RPM Torque. Amp. Eff. Efficiency ? [%] Kg

kW kW 50Hz 60Hz NM 50Hz 60Hz class. 100%load 75% Load cos ph ? IM 1001
50Hz 60Hz 400V 460V 50Hz 400V 460V 50Hz 50Hz 50Hz 50Hz
8- pole motors
1TZ9 A 100L-8 0,75 0,86 725 870 9,9 2,75 2,75 68 65 0,58 21
1TZ9 A 100L-8 1,1 1,3 725 870 14 4,05 4,05 68 64,5 0,58 25
1TZ9 A 112M-8 1,5 1,75 720 864 20 4,2 4,2 77 75,5 0,67 29
1TZ9 A 132S-8 2,2 2,55 725 870 29 6,5 6,5 77,5 76,7 0,63 41
1TZ9 A 132M-8 3 3,45 730 876 40 7,9 7,9 84 82 0,65 49
1TZ9 A 160M-8 4 4,6 730 876 52 9,6 9,6 87 88 0,69 69
1TZ9 A 160M-8 5,5 6,3 735 882 72 13,2 13,2 87,5 89 0,69 82
1TZ9 A 160L-8 7,5 8,6 730 876 98 17 17 88 89 0,72 94
16BG 186-8- AB-- 11 13,2 725 870 145 23,5 23,5 88,7 89,6 0,76 165
16BG 207-8AB-- 15 18 725 870 198 30,5 30,5 89,3 89,8 0,8 235
16BG 220-8AB-- 18,5 22 730 876 245 36 36 91,1 91,8 0,81 295
16BG 223-8AB-- 22 26,5 730 876 288 43 43 91,6 92,1 0,81 335
16BG 253-8AB-- 30 36 735 882 390 57 57 92,8 93,3 0,82 435
16BG 280-8AB-- 37 44,5 738 886 479 86 71 93,1 93,3 0,81 510
16BG 283-8AB-- 45 54 738 886 582 102 87 93,7 94 0,81 560
16BG 310-8AB-- 55 66 740 888 710 138 102 94,3 94,4 0,82 750
16BG 313-8AB-- 75 90 740 888 968 164 138 94,5 94,7 0,83 840
16BG 316-8AB-- 90 108 740 888 1161 160 164 94,7 95,1 0,84 1005
16BG 317-8AB-- 110 132 740 888 1420 193 200 94,8 95,1 0,84 1100
16BG 318-8AB-- 132 158 740 888 1704 230 240 94,9 95,2 0,84 1270
16BG 312-8MB-- 160 192 738 886 2070 300 205 94,6 95,1 0,81 1380
Additional data for 60Hz on request.

Other Sizes and Voltages on request.
a)Increased rated output.
400
U (new voltage)
7
2- Pole Motors
Technical data for standard execution, S1- duty, IP55
Output RPM Amp Eff
Type
kW kW 50Hz 60Hz Ist. Mst. Mmax Kg inertia
50Hz 60Hz n[%] cos φ
50Hz 60Hz 400V 440-480V In Mn Mn IM 1001 (kgm2)
7AA63M02K 0,18 0,21 2820 3420 0,51 0,5 63 0,82 3,7 2 2,2 3,5 0,000
7AA63M02 0,25 0,29 2830 3420 0,68 0,67 65 0,82 4 2 2,2 4,1 0,000
7AA63M02V a) 0,45 0,52 2720 3320 1,09 1,02 67 0,88 4,2 2 2,2 5,2 0,000
7AA71M02K 0,37 0,43 2740 3340 1 0,98 66 0,82 3,5 2,3 2,3 5 0,000
7AA71M02 0,55 0,63 2800 3400 1,36 1,32 71 0,82 4,3 2,5 2,6 6,6 0,000
7AA71M02V a) 0,94 1,08 2735 3290 2,3 2,2 73 0,82 4,7 3,1 2,6 7 0,001
7AA80M02K 0,75 0,86 2855 3455 1,73 1,68 73 0,86 5,6 2,3 2,4 8,2 0,001
7AA80M02 1,1 1,3 2845 3435 2,4 2,4 77 0,87 6,1 2,6 2,7 9,9 0,001
7AA80M02V a) 1,75 2 2840 3440 4 4 75 0,84 6,1 2,6 2,3 13 0,001
7AA90S02 1,5 1,75 2840 3460 3,25 3,2 78 0,85 5,5 2,4 2,7 12 0,002
7AA90S02V a) 2,9 3,35 2825 3425 6,3 6,3 81 0,83 6,6 3,4 3,7 16 0,002
7AA90L02 2,2 2,55 2880 3480 4,55 4,5 81 0,85 6,3 2,8 3,1 15 0,002
7AA90L02V a) 3,8 4,3 2810 3440 7,9 7,4 82 0,85 6 3,1 3,2 20 0,002
7AA100L02 3 3,45 2890 3490 6,1 5,9 84 0,85 6,8 2,8 3 21 0,004
7BA100L02 3 3,45 2890 3490 6,1 5,9 84 0,85 6,8 2,8 3 28 0,004
7AA100L02V a) 4,6 5,3 2880 3475 9,9 9,5 85 0,79 7,8 3,8 4,5 27 0,005
7BA100L02V a) 4,6 5,3 2880 3470 9,8 9,4 85 0,81 7,8 3,8 4,5 35 0,005
7AA112M02 4 4,6 2905 3505 7,8 7,6 86 0,86 7,2 2,6 2,9 29 0,006
7BA112M02 4 4,6 2905 3505 7,8 7,6 85 0,87 7,2 2,6 2,9 39 0,006
7AA112M02V a) 5,5 6,3 2900 3495 10,7 10,5 86 0,87 7,5 2,6 3,4 37 0,008
7BA112M02V a) 5,5 6,3 2900 3500 10,7 10,5 86 0,87 7,5 2,6 3,4 37 0,008
7AA132S02K 5,5 6,3 2925 3525 10,3 10,1 86,5 0,89 5,5 2 2,8 40 0,016
7BA132S02K 5,5 6,3 2895 3525 10,3 10,1 86 0,9 6,1 1,8 3,2 51 0,016
7AA132S02 7,5 8,6 2930 3530 13,8 13,5 87 0,89 6,3 2,3 3 48 0,021
7BA132S02 7,5 8,6 2930 3530 13,8 13,5 86,5 0,9 6,9 2,4 3,4 58 0,021
7AA132M02V a) 11 12,6 2905 3505 21,7 21 86 0,85 7,5 2,6 3,6 58 0,026
7BA132M02V a) 11 12,6 2900 3500 20,6 19,7 85 0,91 7,5 2,6 3,6 71 0,026
7AA160M02K 11 12,6 2940 3540 20 19,8 88 0,88 6 1,9 2,8 68 0,034
7BA160M02K 11 12,6 2940 3540 20,4 19,8 87 0,88 5,8 1,8 2,6 91 0,034
7AA160M02 15 17,3 2930 3530 26,5 26,5 88,5 0,9 6,4 2,2 3 76 0,04
7BA160M02 15 17,3 2940 3530 26,5 26,5 88,5 0,9 6,4 2,1 3 100 0,04
7AA160L02 18,5 21,3 2940 3540 32,5 32 90 0,91 7,1 2,6 3,4 87 0,052
7BA160L02 18,5 21,3 2940 3540 32,5 32 89 0,91 6,9 2,4 3,4 115 0,052
7AA160L02V a) 24,5 28 2920 3515 45,5 44 89 0,87 7,5 2,6 3,4 120 0,06
14BG183-2AA b) 22 24,5 2945 3535 40,5 40,5 91,6 0,86 6,4 2,5 3,4 145 0,068
14BG188-2AA a) b) 30 33,5 2950 3540 54 54 92,8 0,86 7,1 2,4 3,4 175 0,086
14BG206-2AA b) 30 33,5 2950 3540 54 54 91,8 0,88 6,5 2,3 3 205 0,129
14BG207-2AA b) 37 41,5 2955 3545 65 65 92,9 0,89 7,2 2,5 3,3 225 0,153
14BG208-2AA a) b) 45 51 2955 3545 78 78 93,6 0,89 6,9 2,5 3,2 255 0,182
14BG223-2AA b) 45 51 2960 3550 79 79 93,6 0,88 6,7 2,4 3,1 285 0,217
14BG228-2AA a) b) 55 62 2960 3550 94 94 94,8 0,89 7,3 2,6 3,2 335 0,266
14BG253-2AB b) 55 62 2970 3565 96 96 93,6 0,88 6,7 2,1 3,1 375 0,403
14BG258-2AA a) b) 75 84 2970 3565 130 130 94,5 0,88 7,1 2,4 3,1 420 0,483
14BG280-2AB 75 84 2975 3570 130 130 94,5 0,88 7,5 2,5 3,1 500 0,751
14BG283-2AB b) 90 101 2975 3570 154 154 95,1 0,89 7,2 2,6 3,1 540 0,832
14BG288-2AB a) b) 110 123 2975 3570 184 184 95,5 0,9 7 2,5 3 630 1
14BG310-2AB 110 123 2982 3580 190 190 94,6 0,88 7,2 2,4 3,1 720 1,19
14BG313-2AB b) 132 148 2982 3580 225 225 95,1 0,9 6,9 2,4 3 775 1,39
14BG316-2AB 160 180 2982 3580 265 265 95,5 0,91 7 2,4 3 900 1,62
14BG317-2AB 200 224 2982 3580 325 325 95,9 0,92 6,7 2,3 2,9 1015 2,09
14BG318-2AB a) 250 280 2982 3580 410 410 96 0,92 6,7 2,4 2,8 1230 2,46
14BG319-2AA a) 315 353 2988 3585 530 530 96,4 0,89 9,2 3,4 3,8 1355 2,78
LM355LY-2 355 390 2970 3560 594 568 95,8 0,9 7,3 1,6 2,2 1950 5,8
LM355XB-2 400 440 2975 3570 668 639 96 0,9 6,8 1,6 2 2180 5,3
LM355XC-2 450 495 2975 3570 752 719 96 0,9 6,8 1,6 2 2340 5,9
LM355XD-2 500 550 2975 3570 835 799 96 0,9 6,8 1,6 2 2520 6,4
LM 400XA2 560 616 2980 3576 936 895 96 0,9 7,2 1,2 2 3200 8,6
LM 400XB2 630 693 2980 3576 1052 1017 96 0,9 7,2 1,2 2 3490 9,6
LM 400XC2 710 781 2980 3576 1187 1187 96 0,9 7,2 1,2 2 3660 11

b) Two parallel terminals per phase are required for mains feed 230V.
400
U (new voltage)
8
4- Pole Motors
Output RPM Amp Eff
Type
7AA63M04K 0,12 0,14 1350 1650 0,42 0,41 55 0,75 2,8 1,9 2 3,5 0,000
7AA63M04 0,18 0,21 1350 1650 0,56 0,57 60 0,77 3 1,9 1,9 4,1 0,000
7AA63M04V a) 0,29 0,33 1330 1640 0,95 1 61 0,71 2,9 2,5 2,2 4,5 0,000
7AA71M04K 0,25 0,29 1350 1650 0,77 0,75 60 0,78 3 1,9 1,9 4,8 0,001
7AA71M04 0,37 0,43 1370 1670 1,05 1,04 65 0,78 3,3 1,9 2,1 6 0,001
7AA71M04V a) 0,6 0,69 1350 1655 1,6 1,5 70 0,79 4,1 2,4 2,1 7,4 0,001
7AA80M04K 0,55 0,63 1395 1695 1,45 1,41 67 0,81 3,9 2,2 2,2 8 0,002
7AA80M04 0,75 0,86 1395 1695 1,86 1,8 72 0,81 4,2 2,3 2,3 9,4 0,002
7AA80M04V a) 1,25 1,45 1340 1640 3,1 3,1 71 0,82 4,7 2,8 2,9 12 0,003
7AA90S04 1,1 1,3 1415 1715 2,55 2,55 77 0,81 4,6 2,3 2,4 12 0,003
7AA90L04 1,5 1,75 1420 1720 3,4 3,3 79 0,81 5,3 2,4 2,6 15 0,004
7AA90L04V 2,5 2,9 1380 1680 5,9 5,9 76 0,81 4,5 2,8 2,6 20 0,004
7AA100L04K 2,2 2,55 1420 1720 4,7 4,6 82 0,82 5,6 2,5 2,8 25 0,005
7BA100L04K 2,2 2,55 1420 1720 4,7 4,6 81 0,82 5,6 2,5 2,8 28 0,005
7AA100L04 3 3,45 1420 1720 6,4 6,2 83 0,82 5,6 2,7 3 26 0,006
7BA100L04 3 3,45 1410 1710 6,4 6,2 82,6 0,83 5,6 2,7 3 30 0,006
7AA100L04V a) 3,8 4,3 1400 1680 9,1 9,1 78 0,77 5,6 3 2,9 29 0,007
7AA112M04 4 4,6 1440 1740 8,2 7,9 85 0,83 6 2,7 3 32 0,011
7BA112M04 4 4,6 1440 1740 8,2 7,9 85 0,83 6 2,7 3 40 0,011
7AA112M04V a) 5,5 6,3 1440 1730 12,1 11,5 82 0,79 6,8 3 3 37 0,014
7BA112M04V a) 5,5 6,3 1435 1730 12,7 12,1 81 0,77 6,5 3,3 3,4 46 0,014
7AA132S04 5,5 6,3 1455 1755 11,4 10,9 86 0,81 6,3 2,5 3,1 42 0,018
7BA132S04 5,5 6,3 1455 1755 11,4 10,9 85,7 0,81 6,3 2,5 3,1 55 0,018
7AA132M04 7,5 8,6 1455 1755 15,2 14,7 87 0,82 6,7 2,7 3,2 49 0,024
7BA132M04 7,5 8,6 1455 1755 15,2 14,7 87 0,82 6,7 2,7 3,2 61 0,024
7AA132M04V a) 10 11,5 1440 1745 20,5 19,8 86 0,82 7,4 3,2 3,5 61 0,031
7BA132M04V a) 10 11,5 1440 1745 21 19,8 85 0,81 7 3,3 3,7 76 0,031
7AA160M04 11 12,6 1460 1760 21,5 21 88,5 0,84 6,2 2,2 2,7 76 0,04
7BA160M04 11 12,6 1460 1760 21,5 21 88,4 0,84 6,6 2,7 2,7 92 0,04
7AA160L04 15 17,3 1460 1760 28,5 28 90 0,84 6,5 2,6 3 79 0,052
7BA160L04 15 17,3 1460 1760 28,5 28 89,4 0,84 6,5 2,6 3 118 0,052
7AA160L04V a) 22 25,3 1455 1750 44 43 88 0,83 7,5 2,9 2,8 95 0,045
14BG183-4AA b) 18,5 21,3 1465 1760 35 35 90,4 0,84 6,7 2,4 3,1 140 0,099
14BG186-4AA b) 22 25,3 1465 1760 41,5 41,5 91 0,84 6,9 2,5 3,2 155 0,117
14BG188-4AA a) b) 30 34,5 1465 1760 59 59 91,7 0,8 6,3 2,6 2,9 180 0,144
14BG207-4AA b) 30 34,5 1465 1760 56 56 91,6 0,85 6,7 2,5 3,4 205 0,191
14BG208-4AA a) b) 37 42,5 1465 1760 70 70 92,5 0,83 6,5 2,6 3 230 0,234
14BG220-4AA b) 37 42,5 1475 1770 68 68 92,2 0,85 6,7 2,5 3,1 265 0,374
14BG223-4AA b) 45 52 1475 1770 81 81 93,1 0,86 7,2 2,7 3,2 300 0,447
14BG228-4AA a) b) 55 63 1475 1770 99 99 93,4 0,86 6,5 2,5 2,7 330 0,486
14BG253-4AA 55 63 1480 1775 100 100 93,5 0,85 6,1 2,4 2,8 390 0,688
14BG258-4AA a) b) 75 86 1482 1780 136 136 94,3 0,85 7 2,5 3 460 0,856
14BG280-4AA b) 75 86 1485 1780 136 136 94,2 0,85 7,1 2,5 3 535 1,19
14BG283-4AA b) 90 104 1485 1780 160 160 94,6 0,86 7,4 2,5 3 580 1,39
14BG288-4AA a) b) 110 127 1488 1785 198 198 95,2 0,84 7,9 2,8 3,3 680 1,71
14BG310-4AA 110 127 1488 1785 198 198 94,6 0,85 6,4 2,5 2,8 730 1,94
14BG313-4AA 132 152 1488 1785 235 235 95,2 0,85 6,8 2,7 2,9 810 2,31
14BG316-4AA 160 184 1486 1785 280 280 95,7 0,86 6,8 2,7 2,8 955 2,88
14BG317-4AA 200 230 1486 1785 340 340 95,9 0,88 6,5 2,6 2,8 1060 3,46
14BG318-4AA a) 250 288 1488 1785 430 430 96,1 0,87 7,7 3,1 3,2 1290 4,22
14BG319-4AA a) 315 362 1488 1785 550 550 96,3 0,86 7,3 3,3 3,1 1500 5,0
LM355XA-4 355 390 1485 1780 614 587 96 0,87 6,8 1,8 2 2150 9,5
LM355XB-4 400 440 1485 1780 691 661 96 0,87 6,8 1,8 2 2300 10,6
LM355XC4 450 495 1485 1780 778 744 96 0,87 6,8 1,8 2 2460 11,5
LM355XD-4 500 550 1485 1780 864 827 96 0,87 6,8 1,8 2 2720 12,8
LM400LX-4 560 616 1480 1785 946 905 96 0,89 7 1,3 2,8 3360 19,5
LM400XB-4 630 693 1490 1785 1064 1018 96 0,89 7 1,3 2,8 3430 18,5
LM400XC4 710 781 1490 1785 1194 1153 96 0,89 7 1,3 2,8 3620 21,1

400
U (new voltage)
9
6- Pole Motors
Output RPM Amp Eff
Type
7AA63M06K 0,06 0,07 870 1080 0,33 0,32 39 0,66 2 1,8 1,8 3,5 0,000
7AA63M06 0,09 0,11 850 1070 0,47 0,46 42 0,66 2,2 1,8 1,5 4,1 0,000
7AA63M06V a) 0,12 0,14 890 1090 0,64 0,63 45 0,61 2,2 1,8 1,9 6,1 0,000
7AA71M06K 0,18 0,21 850 1050 0,72 0,67 54 0,68 2,3 2,1 1,9 6,3 0,001
7AA71M06 0,25 0,29 860 1060 0,79 0,77 61 0,76 2,7 2,2 2 6,3 0,001
7AA80M06K 0,37 0,43 920 1125 1,2 1,19 62 0,72 3,1 1,9 2,1 7,5 0,002
7AA80M06 0,55 0,63 910 1110 1,6 1,55 67 0,74 3,4 2,1 2,2 9,4 0,002
7AA90S06 0,75 0,86 915 1115 2,1 2 69 0,76 3,7 2,2 2,2 12 0,003
7AA90L06 1,1 1,3 915 1115 2,9 2,9 72 0,77 3,8 2,3 2,3 15 0,004
7AA100L06 1,5 1,75 925 1125 3,9 3,85 74 0,75 4,2 2,2 2,4 22 0,006
7BA100L06 1,5 1,75 930 1120 4 3,9 72 0,75 4,5 2,1 2,3 31 0,006
7AA112M06 2,2 2,55 940 1140 5,2 5,1 78 0,78 4,6 2,2 2,5 27 0,011
7BA112M06 2,2 2,55 940 1140 5,75 5,4 77 0,72 4,8 2,2 2,6 36 0,011
7AA112M06V a) 3 3,45 940 1140 7 6,8 80 0,78 4,8 2,4 2,4 28 0,015
7BA112M06V a) 3 3,45 930 1135 7,4 7,2 78 0,75 4,6 2,2 2,3 42 0,015
7AA132S06 3 3,45 950 1145 7,2 7,1 79 0,76 4,2 1,9 2,2 40 0,015
7BA132S06 3 3,45 950 1150 7,5 7,3 78 0,74 4,2 1,9 2,1 52 0,015
7AA132S06V a) 4 4,6 950 1150 9,4 9,2 80,5 0,76 4,5 2,1 2,4 48 0,019
7BA132S06V a) 4 4,6 950 1150 9,9 9,5 81 0,72 5 2,4 2,9 59 0,019
7AA132M06 5,5 6,3 950 1150 12,6 12,6 83 0,76 5 2,3 2,6 55 0,025
7BA132M06 5,5 6,3 950 1150 13,9 12,9 81 0,71 5,3 2,5 2,9 64 0,025
7AA160M06 7,5 8,6 960 1160 17 16,8 86 0,74 4,6 2 2,5 74 0,041
7BA160M06 7,5 8,6 960 1150 17,2 16,7 84 0,75 4,6 2 2,2 100 0,041
7AA160L06 11 12,6 960 1160 24,5 24,2 87,5 0,74 4,8 2,3 2,6 102 0,049
7BA160L06 11 12,7 960 1160 24,5 24,6 86 0,75 4,8 2,2 2,3 121 0,049
14BG186-6AA 15 18 965 1160 29,5 29,5 88,9 0,83 5,3 2,3 2,5 150 0,175
14BG188-6AA a) b) 18,5 22 970 1165 37,5 37,5 89,6 0,8 4,9 2,3 2,4 175 0,203
14BG206-6AA 18,5 22 975 1170 36,5 36,5 89,8 0,81 5,6 2,5 2,5 195 0,238
14BG207-6AA 22 26,5 975 1170 43,5 43,5 90,3 0,81 5,7 2,6 2,5 205 0,287
14BG208-6AA a) b) 30 36 975 1170 60 60 90,9 0,8 5,8 2,6 2,6 245 0,362
14BG223-6AA b) 30 36 978 1175 57 57 91,8 0,83 5,6 2,7 2,5 280 0,492
14BG228-6AA a) b) 37 44,5 978 1175 70 70 92,2 0,83 5,9 2,5 2,8 325 0,624
14BG253-6AA 37 44,5 980 1175 70 70 92,3 0,83 6 2,7 2,3 370 0,762
14BG258-6AA 45 54 982 1180 84 84 93,3 0,83 6,3 2,7 2,3 405 0,934
14BG280-6AA 45 54 985 1180 83 83 92,4 0,85 6,1 2,4 2,4 475 1,12
14BG283-6AA 55 66 985 1180 100 100 92,7 0,86 6,3 2,5 2,5 510 1,37
14BG288-6AA a) b) 75 90 985 1180 136 136 93,8 0,85 6,8 3 2,8 570 1,65
14BG310-6AA 75 90 988 1180 138 138 93,5 0,84 6,5 2,5 2,8 685 2,1
14BG313-6AA 90 108 988 1185 164 164 93,9 0,84 6,8 2,6 2,9 750 2,5
14BG316-6AA 110 132 988 1185 196 196 94,3 0,86 6,8 2,5 2,9 890 3,2
14BG317-6AA 132 158 988 1185 235 235 94,8 0,86 7,3 3,1 3 980 4,02
14BG318-6AA 160 192 988 1185 285 285 95 0,86 7,5 3 3 1180 4,71
14BG319-6AA 200 240 990 1185 355 355 95,5 0,85 7 2,8 2,9 1285 5,72
LM355L-6 250 275 990 1185 431 412 95,2 0,88 6,9 2 2 1900 11,1
LM355XB-6 315 347 990 1185 557 533 96 0,85 6,5 1,8 2 2310 13,5
LM355XC-6 355 391 990 1185 628 595 96 0,85 6,5 1,8 2 2490 14,3
LM355XD-6 400 440 990 1185 707 669 96 0,85 6,5 1,8 2 2630 15,4
LM400LX-6 450 495 990 1185 787 753 96 0,86 6,5 1,1 2,8 3820 28,8
LM400LY-6 500 550 990 1185 876 838 95,8 0,86 7,4 1,3 2,8 3970 31,4
LM400XC-6 560 616 990 1185 979 936 96 0,86 6,8 1,3 2,8 3660 28,8
LM450XA-6 630 693 995 1190 1119 1079 95,6 0,85 6,5 1,2 2,1 4700 45,1
LM450XB-6 710 781 995 1190 1246 1202 95,6 0,86 6,5 1,2 2,1 5100 48,6

400
U (new voltage)
10
8- Pole Motors
Output RPM Amp Eff
Type
7AA63M08 0,06 0,07 630 795 0,46 0,43 32 0,6 2,2 1,9 1,7 6,3 0,001
7AA71M08K 0,09 0,1 630 780 0,36 0,35 53 0,68 2,2 1,9 1,7 6,3 0,001
7AA71M08 0,12 0,14 645 795 0,51 0,51 53 0,64 2,2 2,2 2 6,3 0,001
7AA71M08 0,18 0,21 610 780 0,95 0,82 48 0,61 1,9 1,9 2 6,5 0,001
7AA80M08K 0,18 0,21 675 830 0,75 0,75 51 0,68 2,3 1,7 1,9 7,5 0,002
7AA80M08 0,25 0,29 685 835 1,03 1 55 0,64 2,6 2 2,2 9,4 0,002
7AA90S08 0,37 0,43 675 825 1,13 1,1 63 0,75 2,9 1,6 1,8 10 0,003
7AA90L08 0,55 0,63 675 825 1,58 1,5 66 0,76 3 1,7 1,9 13 0,004
7AA90L08V 0,75 0,86 655 810 2,7 2,5 61 0,67 3,4 1,9 2,1 14 0,005
7AA100L08K 0,75 0,86 680 830 2,15 2,1 66 0,76 3 1,7 1,9 19 0,005
7BA100L08K 0,75 0,86 680 830 2,2 2,15 67 0,76 3 1,6 1,9 22 0,005
7AA100LO8 1,1 1,3 680 830 2,9 2,9 72 0,76 3,4 1,9 2,1 22 0,007
7BA100LO8 1,1 1,3 670 820 3 2,9 70 0,75 3,1 1,7 2 28 0,007
7AA112M08 1,5 1,75 705 855 3,85 3,8 74 0,76 3,7 1,8 2,1 24 0,013
7BA112M08 1,5 1,75 705 855 3,85 3,8 74 0,76 4.0 1,8 2,1 33 0,013
7AA112M08V a) 2,2 2,55 695 845 6,2 5,8 74 0,7 4,2 2,1 2,5 41 0,019
7BA112M08V a) 2,2 2,55 695 845 6,2 5,8 74 0,7 3,9 2,2 2,3 50 0,019
7AA132S08 2,2 2,55 690 840 6,3 6 75 0,69 3,9 1,9 2,3 53 0,014
7BA132S08 2,2 2,55 690 840 6,3 6 73 0,69 3,6 2 2,3 56 0,014
7AA132S08V a) 3 3,45 700 845 7,6 7,4 77 0,74 4,1 2,1 2,4 38 0,019
7BA132S08V a) 3 3,45 690 840 8,15 8,1 77 0,69 3,7 2,1 2,4 58 0,019
7AA132M08 3 3,45 700 845 7,6 7,4 77 0,74 4,1 2,1 2,4 55 0,019
7BA132M08 3 3,45 690 840 8,15 8,1 77 0,69 3,7 2,1 2,4 60 0,019
7AA132M08V a) 4 4,6 690 845 11,5 10,9 74 0,68 3,9 2,2 2,4 53 0,025
7BA132M08V a) 4 4,6 690 845 11,5 10,9 74 0,68 3,9 2,2 2,4 65 0,025
7AA160M08K 4 4,6 715 865 10 9,8 80 0,72 4,5 2,2 2,6 70 0,035
7BA160M08K 4 4,6 710 860 10,3 9,9 78 0,72 4,3 2 2,4 90 0,035
7AA160M08 5,5 6,3 710 860 13 12,8 83,5 0,73 4,7 2,3 2,7 70 0,043
7BA160M08 5,5 6,3 710 860 13,1 12,8 83 0,75 4,7 2,2 2,4 97 0,043
7AA160L08 7,5 8,6 715 865 17,6 17,4 85,5 0,72 5,3 2,7 3 91 0,062
7BA160L08 7,5 8,6 710 860 18,1 17,4 83 0,72 5,3 2,5 2,9 121 0,062
14BG186-8AB 11 13,2 725 870 25 25 87,5 0,73 4,2 1,7 2,1 150 0,169
14BG188-8AB a) b) 15 18 720 865 34 34 87,8 0,73 4,5 2 2,4 165 0,206
14BG207-8AB 15 18 725 870 32,5 32,5 87,7 0,76 4,9 2,2 2,6 205 0,29
14BG208-8AB a) 18,5 22 725 870 39 39 88,3 0,78 5,2 2,4 2,6 230 0,367
14BG220-8AB 18,5 22 730 875 38,5 38,5 89,4 0,78 5,5 2,3 2,7 270 0,482
14BG223-8AB 22 26,5 730 875 45 45 89,7 0,79 5,6 2,3 2,8 290 0,551
14BG228-8AB a) b) 30 36 730 875 61 61 90,4 0,79 5,6 2,6 2,8 340 0,658
14BG253-8AB 30 36 730 875 58 58 91,4 0,81 5,5 2,3 2,6 385 0,837
14BG258-8AB a) 37 44,5 730 875 71 71 91,9 0,82 5,6 2,4 2,6 430 1,06
14BG280-8AB 37 44,5 735 880 72 72 92 0,81 5 2,2 2,1 475 1,11
14BG283-8AB 45 54 735 880 87 87 92,4 0,81 5,1 2,2 2,1 515 1,35
14BG288-8AB a) 55 66 735 880 106 106 92,9 0,81 5,6 2,4 2,3 565 1,63
14BG310-8AB 55 66 740 885 106 106 93 0,81 5,8 2,2 2,6 680 2,08
14BG313-8AB 75 90 738 885 140 140 93,3 0,83 5,7 2,2 2,6 745 2,48
14BG316-8AB 90 108 738 885 168 168 93,4 0,83 5,8 2,2 2,7 865 3,14
14BG317-8AB 110 132 738 885 205 205 94 0,83 6,1 2,4 2,8 1020 3,95
14BG318-8AB a) 132 158 738 885 245 245 94,2 0,83 6,5 2,5 2,9 1100 4,52
14BG319-8AB a) 160 184 738 886 290 290 94,5 0,84 6,5 2,6 2,9 1325 4,8
LM355LX-8 200 220 745 890 367 351 94,8 0,83 6,5 1,8 2 2040 15,9
LM400M-8 250 275 745 890 469 449 95 0,81 6,9 1,4 2,6 2900 27,4
LM400L-8 315 347 745 890 563 539 95 0,85 6,5 1,3 2,6 3100 30,6
LM400LX-8 355 391 744 890 642 614 95 0,84 5,8 1,2 2,6 3250 32,4
LM400LY-8 400 440 743 890 715 684 95 0,85 5,7 1,1 2,6 3400 34,2
LM400XC-8 450 495 740 885 804 769 95 0,85 6 1,2 2,6 3760 29
LM450XA-8 500 550 745 890 945 908 95,5 0,8 6,8 1,2 1,8 4750 44,1
LM450XB-8 560 616 745 890 1058 1017 95,5 0,8 6,8 1,2 1,8 5215 49,5
LM450XC-8 630 693 745 890 1189 1144 95,6 0,8 6,8 1,2 1,8 5600 54,8
LM500XA-8 710 781 745 890 1315 1267 96 0,81 6 0,8 1,8 5750 70,1

400
U (new voltage)
11
2/4- Pole Motors (2- speed)

Technical data for standard execution, S1- duty, IP55, 380-420V 50Hz. ( Single winding – Dahlander )
Fan / pump duty Constant torque
Output AMP Output AMP
RPM RPM
kW (400) Type kW (400)
Type
Low High Low High Low High Low High Low High Low High
7AA71M21- V 0,14 0,65 1410 2650 0,58 1,80 7AA63M21K 0,10 0,15 1330 2650 0,41 0,51
7AA80M21K- V 0,15 0,70 1400 2740 0,39 1,76 7AA63M21 0,15 0,20 1330 2700 0,51 0,58
7AA80M21- V 0,25 0,95 1385 2780 0,61 2,40 7AA71M21K 0,21 0,28 1375 2700 0,70 1,10
7AA90S21- V 0,33 1,40 1420 2835 0,78 3,50 7AA71M21 0,30 0,43 1380 2770 0,89 1,30
7AA90L21- V 0,50 2,00 1420 2835 1,08 4,80 7AA80M21K 0,48 0,60 1390 2810 1,25 1,60
7AA/ BA100L21K- V 0,65 2,50 1430 2865 1,44 5,40 7AA80M21 0,70 0,85 1390 2810 1,75 2,10
7AA/ BA100L21- V 0,80 3,10 1425 2860 1,70 7,00 7AA90S21 1,10 1,40 1390 2810 2,70 3,60
7AA/ BA112M21- V 1,10 4,40 1445 2885 2,50 10,7 7AA90L21 1,50 1,90 1390 2860 3,40 4,50
7AA/ BA132S21- V 1,45 5,90 1455 2920 3,00 12,8 7AA/ BA100L21K 2,00 2,40 1400 2880 4,25 5,50
7AA/ BA132M21- V 2,00 8,00 1455 2930 4,00 16,0 7AA/ BA100L21 2,60 3,10 1400 2850 5,50 7,60
7AA/ BA160M21- V 2,90 11,5 1455 2930 5,70 22,0 7AA/ BA112M21 3,70 4,40 1420 2885 8,00 10,5
7AA/ BA160L21- V 4,30 17,0 1455 2930 8,40 31,0 7AA/ BA132S21 4,70 5,90 1450 2920 9,70 12,5
14BG183-0BA 4,80 18,0 1465 2935 9,10 33,5 7AA/ BA132M21 6,50 8,00 1450 2930 13,6 16,7
14BG186-0BA 5,80 21,5 1470 2950 11,2 38,5 7AA/ BA160M21 9,30 11,5 1455 2930 18,3 23,4
14BG207-0BA 8,40 31,0 1475 2950 15,5 55,0 7AA/ BA160L21 13,0 17,0 1455 2930 25,6 32,0
14BG220-0BA 10,5 38,0 1475 2955 20,0 68,0 14BG183-0AA 15,0 18,0 1470 2940 28,0 33,5
14BG223-0BA 13,0 45,0 1475 2960 23,0 78,0 14BG186-0AA 18,0 21,5 1465 2940 33,5 38,5
14BG253-0BA 15,0 55,0 1480 2960 27,0 102 14BG207-0AA 26,0 31,0 1465 2950 48,0 55,0
14BG280-0BA 18,0 67,0 1490 2972 32,5 120 14BG220-0AA 32,0 38,0 1475 2955 58,0 69,0
14BG283-0BA 22,0 80,0 1490 2975 39,5 140 14BG223-0AA 38,0 45,0 1475 2960 68,0 78,0
14BG310-0BA 26,0 90,0 1492 2978 47,0 162 14BG253-0AA 46,0 55,0 1480 2960 84,0 102
14BG313-0BA 32,0 110 1492 2976 57,0 190 14BG280-0AA 63,0 75,0 1485 2965 112 134
14BG316-0BA 35,0 140 1492 2974 62,0 230 14BG283-0AA 73,0 87,0 1487 2975 130 155
14BG317-0BA 45,0 170 1492 2976 78,0 280 14BG310-0AA 85,0 100 1490 2976 156 182
14BG313-0AA 100 120 1488 2978 177 212
14BG316-0AA 120 145 1488 2976 209 242
14BG317-0AA 145 172 1490 2976 250 282
Technical data for standard execution, S1- duty, IP55, 440-480V 60Hz. ( Single winding – Dahlander )
RPM RPM
Type kW (460) Type kW (460)
7AA71M21- V 0,16 0,73 1692 3180 0,58 1,80 7AA63M21K 0,12 0,17 1596 3180 0,41 0,51
7AA80M21K- V 0,17 0,78 1680 3288 0,39 1,76 7AA63M21 0,17 0,22 1596 3240 0,51 0,58
7AA80M21- V 0,29 1,06 1662 3336 0,61 2,40 7AA71M21K 0,24 0,31 1650 3240 0,70 1,10
7AA90S21- V 0,38 1,57 1704 3402 0,78 3,50 7AA71M21 0,35 0,48 1656 3324 0,89 1,30
7AA90L21- V 0,58 2,24 1704 3402 1,08 4,80 7AA80M21K 0,55 0,67 1668 3372 1,25 1,60
7AA/ BA100L21K- V 0,75 2,80 1716 3438 1,44 5,40 7AA80M21 0,81 0,95 1668 3372 1,75 2,10
7AA/ BA100L21- V 0,92 3,47 1710 3432 1,70 7,00 7AA90S21 1,27 1,57 1668 3372 2,70 3,60
7AA/ BA112M21- V 1,27 4,93 1734 3462 2,50 10,7 7AA90L21 1,73 2,13 1668 3432 3,40 4,50
7AA/ BA132S21- V 1,67 6,61 1746 3504 3,00 12,8 7AA/ BA100L21K 2,30 2,69 1680 3456 4,25 5,50
7AA/ BA132M21- V 2,30 8,96 1746 3516 4,00 16,0 7AA/ BA100L21 2,99 3,47 1680 3420 5,50 7,60
7AA/ BA160M21- V 3,34 12,9 1746 3516 5,70 22,0 7AA/ BA112M21 4,26 4,93 1704 3462 8,00 10,5
7AA/ BA160L21- V 4,95 19,0 1746 3516 8,40 31,0 7AA/ BA132S21 5,41 6,61 1740 3504 9,70 12,5
14BG183-0BA 5,52 20,2 1758 3522 9,10 33,5 7AA/ BA132M21 7,48 9,00 1740 3516 13,6 16,7
14BG186-0BA 6,67 24,1 1764 3540 11,2 38,5 7AA/ BA160M21 10,7 12,9 1746 3516 18,3 23,4
14BG207-0BA 9,66 34,7 1770 3540 15,5 55,0 7AA/ BA160L21 15,0 19,0 1746 3516 25,6 32,0
14BG220-0BA 12,1 42,6 1770 3546 20,0 68,0 14BG183-0AA 17,3 20,2 1764 3528 28,0 33,5
14BG223-0BA 15,0 50,4 1770 3552 23,0 78,0 14BG186-0AA 20,7 24,1 1758 3528 33,5 38,5
14BG253-0BA 17,3 61,6 1776 3552 27,0 102 14BG207-0AA 29,9 34,7 1758 3540 48,0 55,0
14BG280-0BA 20,7 75,0 1788 3566 32,5 120 14BG220-0AA 36,8 42,6 1770 3546 58,0 69,0
14BG283-0BA 25,3 89,6 1788 3570 39,5 140 14BG223-0AA 43,7 50,4 1770 3552 68,0 78,0
14BG310-0BA 29,9 101 1790 3574 47,0 162 14BG253-0AA 52,9 61,6 1776 3552 84,0 102
14BG313-0BA 36,8 123 1790 3571 57,0 190 14BG280-0AA 72,5 84,0 1782 3558 112 134
14BG316-0BA 40,3 157 1790 3568 62,0 230 14BG283-0AA 84,0 97,4 1784 3570 130 155
14BG317-0BA 51,8 190 1790 3571 78,0 280 14BG310-0AA 97,8 112 1788 3571 156 182
14BG313-0AA 115 134 1786 3574 177 212
14BG316-0AA 138 162 1786 3571 209 242
14BG317-0AA 167 193 1788 3571 250 282
Technical data for standard execution, S1- duty, IP55, 380-420V 50Hz. ( Separate windings )
Fan / pump duty
Output AMP
RPM
Type kW (400)
Low High Low High Low High
7AA80M21- V2 0,20 0,75 1435 2820 0,60 1,90
7AA90L21- V2 0,25 1,10 1465 2865 0,87 2,30
7AA90L21- V2 0,30 1,50 1460 2810 0,93 3,10
7AA112M21- V2 0,45 2,20 1490 2950 3,45 5,70
7AA112M21- V2 0,75 3,00 1485 2925 3,50 6,70
400 Other voltages on request.

U (new voltage)
12

Technical data for standard execution, S1- duty, IP55, 380-420V 50Hz. (Separate windings )
RPM RPM
7AA80M25K- V 0,12 0,40 940 1430 0,51 1,38 7AA/ BA100L25K 0,90 1,30 900 1415 2,70 3,20
7AA80M25- V 0,18 0,55 930 1420 0,73 1,62 7AA/ BA100L25 1,10 1,70 915 1420 3,30 4,20
7AA90S25- V 0,29 0,80 950 1430 1,07 2,10 7AA/ BA112M25 1,50 2,30 950 1460 4,20 5,70
7AA90L25- V 0,38 1,10 955 1430 1,33 2,65 7AA/ BA132S25 2,00 3,10 965 1470 4,80 6,70
7AA/ BA100L25K- V 0,60 1,70 950 1410 1,75 3,80 7AA/ BA132M25 2,80 4,30 965 1465 7,00 9,60
7AA/ BA100L25- V 0,75 2,10 950 1420 2,30 4,55 7AA/ BA160M25 4,30 6,60 970 1470 10,4 14,2
7AA/ BA112M25- V 0,90 3,00 980 1450 3,00 6,70 7AA/ BA160L25 6,30 9,50 970 1470 15,0 18,1
7AA/ BA132S25- V 1,20 3,90 975 1460 3,50 8,40 14BG183-1AD 9,50 14,0 960 1465 21,0 28,0
7AA/ BA132M25- V 1,70 5,40 975 1460 4,55 11,4 14BG186-1AD 11,0 16,5 955 1465 23,5 32,0
7AA/ BA160M25- V 2,50 7,20 980 1470 6,40 14,4 14BG207-1AD 16,0 24,0 965 1465 32,5 45,0
7AA/ BA160L25- V 3,70 12,0 980 1470 9,30 23,3 14BG220-1AD 21,0 31,0 975 1465 41,5 57,0
14BG183-1BD 5,50 16,0 960 1460 12,0 31,5 14BG223-1AD 25,0 37,0 970 1465 48,0 66,0
14BG186-1BD 6,50 19,0 960 1460 14,0 36,5 14BG253-1AD 32,0 47,0 980 1480 60,0 85,0
14BG207-1BD 9,50 26,0 975 1460 20,0 49,0 14BG280-1AD 45,0 66,0 986 1480 86,0 117
14BG220-1BD 12,0 34,0 980 1465 24,5 63,0 14BG283-1AD 54,0 80,0 980 1480 99,0 143
14BG223-1BD 14,5 40,0 980 1470 28,5 72,0 14BG310-1AD 62,0 92,0 990 1486 121 170
14BG253-1BD 18,0 52,0 980 1475 34,0 91,0 14BG313-1AD 75,0 110 990 1490 141 200
14BG280-1BD 25,0 70,0 980 1480 47,0 124 14BG316-1AD 90,0 132 986 1486 164 230
14BG283-1BD 30,0 82,0 985 1480 56,0 148 14BG317-1AD 110 160 990 1490 205 290
14BG310-1BD 33,0 92,0 990 1490 63,0 176
14BG313-1BD 45,0 120 990 1485 85,0 215
14BG316-1BD 50,0 150 990 1485 93,0 260
14BG317-1BD 55,0 170 990 1490 102 310
14BG319-1BD 75,0 250 990 1485 136 430
Technical data for standard execution, S1- duty, IP55, 440-480V 60Hz. (Separate windings )

RPM RPM
Type kW (460) kW (460)
Type
7AA80M25K- V 0,14 0,46 1128 1716 0,51 1,38 7AA/ BA100L25K 1,04 1,50 1080 1698 2,70 3,20
7AA80M25- V 0,21 0,63 1116 1704 0,73 1,62 7AA/ BA100L25 1,27 1,96 1098 1704 3,30 4,20
7AA90S25- V 0,34 0,92 1140 1716 1,07 2,10 7AA/ BA112M25 1,73 2,65 1140 1752 4,20 5,70
7AA90L25- V 0,44 1,27 1146 1716 1,33 2,65 7AA/ BA132S25 2,30 3,57 1158 1764 4,80 6,70
7AA/ BA100L25K- V 0,69 1,96 1140 1692 1,75 3,80 7AA/ BA132M25 3,22 4,95 1158 1758 7,00 9,60
7AA/ BA100L25- V 0,86 2,42 1140 1704 2,30 4,55 7AA/ BA160M25 4,95 7,59 1164 1764 10,4 14,2
7AA/ BA112M25- V 1,04 3,45 1176 1740 3,00 6,70 7AA/ BA160L25 7,25 10,9 1164 1764 15,0 18,1
7AA/ BA132S25- V 1,38 4,49 1170 1752 3,50 8,40 14BG183-1AD 11,4 16,1 1152 1758 21,0 28,0
7AA/ BA132M25- V 1,96 6,21 1170 1752 4,55 11,4 14BG186-1AD 13,2 19,0 1146 1758 23,5 32,0
7AA/ BA160M25- V 2,88 8,28 1176 1764 6,40 14,4 14BG207-1AD 19,2 27,6 1158 1758 32,5 45,0
7AA/ BA160L25- V 4,26 13,8 1176 1764 9,30 23,3 14BG220-1AD 25,2 35,7 1170 1758 41,5 57,0
14BG183-1BD 6,60 18,4 1176 1764 12,0 31,5 14BG223-1AD 30,0 42,6 1164 1758 48,0 66,0
14BG186-1BD 7,80 21,9 1176 1764 14,0 36,5 14BG253-1AD 38,4 54,1 1176 1776 60,0 85,0
14BG207-1BD 11,4 29,9 1176 1764 20,0 49,0 14BG280-1AD 54,0 75,9 1183 1776 86,0 117
14BG220-1BD 14,4 39,1 1176 1764 24,5 63,0 14BG283-1AD 64,8 92,0 1176 1776 99,0 143
14BG223-1BD 17,4 46,0 1176 1764 28,5 72,0 14BG310-1AD 74,4 106 1188 1783 121 170
14BG253-1BD 21,6 59,8 1182 1770 34,0 91,0 14BG313-1AD 90,0 127 1188 1788 141 200
14BG280-1BD 30,0 80,5 1182 1770 47,0 124 14BG316-1AD 108 152 1183 1783 164 230
14BG283-1BD 36,0 94,3 1182 1770 56,0 148 14BG317-1AD 132 184 1188 1788 205 290
14BG310-1BD 39,6 106 1188 1786 63,0 176
14BG313-1BD 54,0 138 1188 1782 85,0 215
14BG316-1BD 60,0 173 1188 1782 93,0 260
14BG317-1BD 66,0 196 1188 1788 102 310
14BG319-1BD 82,5 288 1188 1782 136 430
400 Other voltages on request.

U (new voltage)
13

Technical data for standard execution, S1- duty, IP55, 380-420V 50Hz. (Single winding- Dahlander)
RPM RPM
Type kW (400) kW (400)
Type
7AA71M23 - V 0,06 0,30 660 1355 0,52 0,87 7AA80M23 0,18 0,37 700 1400 1,30 0,94
7AA80M23K - V 0,10 0,50 680 1375 0,57 1,28 7AA90S23 0,35 0,50 675 1365 1,19 1,41
7AA80M23 - V 0,15 0,70 685 1380 0,77 1,76 7AA90L23 0,50 0,70 675 1380 1,60 2,10
7AA90S23 - V 0,22 1,00 695 1370 1,25 2,40 7AA/ BA100L 23K 0,70 1,10 690 1380 2,10 3,25
7AA90L23 - V 0,33 1,50 700 1375 1,80 3,30 7AA/ BA100L 23K 0,90 1,50 680 1400 2,50 3,65
7AA/ BA100L 23K - V 0,50 2,00 710 1415 2,50 4,30 7AA/ BA112M 23 1,40 1,90 690 1410 4,00 5,20
7AA/ BA100L 23 - V 0,65 2,50 700 1400 2,80 5,30 7AA/ BA132S 23 1,80 3,60 720 1430 6,30 7,20
7AA/ BA112M 23 - V 0,90 3,60 720 1440 4,70 8,00 7AA/ BA132M 23 2,50 5,00 720 1430 8,20 10,0
7AA/ BA132S 23 - V 1,10 4,70 720 1455 3,30 10,3 7AA/ BA160M 23 3,50 7,00 725 1450 11,7 13,9
7AA/ BA132M 23 - V 1,40 6,40 720 1455 4,40 13,3 7AA/ BA160L 23 5,60 11,0 725 1450 18,5 21,1
7AA/ BA160M 23 - V 2,20 9,50 725 1465 6,50 19,7 14BG186-0AB 11,0 18,0 730 1466 28,5 34,5
7AA/ BA160L 23 - V 3,30 14,0 730 1470 9,30 28,6 14BG207-0AB 17,0 27,0 732 1465 39,0 46,5
14BG183-0BB 4,50 16,0 725 1465 12,6 31,0 14BG220-0AB 22,0 32,0 730 1468 46,0 55,0
14BG186-0BB 5,00 18,5 725 1470 14,2 35,0 14BG223-0AB 25,0 37,0 732 1470 52,0 63,0
14BG207-0BB 7,50 28,0 730 1475 21,5 52,0 14BG253-0AB 32,0 47,0 735 1475 67,0 80,0
14BG220-0BB 9,50 35,0 738 1478 26,0 64,0 14BG280-0AB 38,0 56,0 738 1478 78,0 94,0
14BG223-0BB 11,5 42,0 738 1475 30,5 75,0 14BG283-0AB 46,0 67,0 740 1480 95,0 114
14BG253-0BB 14,5 52,0 740 1480 38,0 94,0 14BG310-0AB 56,0 82,0 740 1480 114 140
14BG280-0BB 19,0 70,0 740 1480 49,0 124 14BG313-0AB 78,0 115 742 1486 166 192
14BG283-0BB 23,0 83,0 740 1485 58,0 146 14BG316-0AB 92,0 135 738 1478 180 225
14BG310-0BB 26,0 95,0 742 1484 66,0 172 14BG317-0AB 115 160 738 1482 215 260
14BG313-0BB 30,0 115 744 1488 82,0 215
14BG316-0BB 35,0 140 744 1486 88,0 245
14BG317-0BB 45,0 175 744 1490 124 315
Technical data for standard execution, S1- duty, IP55, 440-460V 60Hz. (Single winding- Dahlander)

RPM RPM
7AA71M23 - V 0,07 0,35 792 1626 0,52 0,87 7AA80M23 0,22 0,43 840 1680 1,30 0,94
7AA80M23K - V 0,12 0,58 816 1650 0,57 1,28 7AA90S23 0,42 0,58 810 1638 1,19 1,41
7AA80M23 - V 0,18 0,81 822 1656 0,77 1,76 7AA90L23 0,60 0,81 810 1656 1,60 2,10
7AA90S23 - V 0,26 1,15 834 1644 1,25 2,40 7AA/ BA100L 23K 0,84 1,27 828 1656 2,10 3,25
7AA90L23 - V 0,40 1,73 840 1650 1,80 3,30 7AA/ BA100L 23 1,08 1,73 816 1680 2,50 3,65
7AA/ BA100L 23K - V 0,60 2,30 852 1698 2,50 4,30 7AA/ BA112M 23 1,68 2,19 828 1692 4,00 5,20
7AA/ BA100L 23 - V 0,78 2,88 840 1680 2,80 5,30 7AA/ BA132S 23 2,16 4,14 864 1716 6,30 7,20
7AA/ BA112M 23 - V 1,08 4,14 864 1728 4,70 8,00 7AA/ BA132M 23 3,00 5,75 864 1716 8,20 10,0
7AA/ BA132S 23 - V 1,32 5,41 864 1746 3,30 10,3 7AA/ BA160M 23 4,20 8,05 870 1740 11,7 13,9
7AA/ BA132M 23 - V 1,68 7,36 864 1746 4,40 13,3 7AA/ BA160L 23 6,72 12,7 870 1740 18,5 21,1
7AA/ BA160M 23 - V 2,64 10,9 870 1758 6,50 19,7 14BG186-0AB 13,2 20,7 876 1759 28,5 34,5
7AA/ BA160L 23 - V 3,96 16,1 876 1764 9,30 28,6 14BG207-0AB 20,4 31,1 878 1758 39,0 46,5
14BG183-0BB 5,40 18,4 882 1770 12,6 31,0 14BG220-0AB 26,4 36,8 876 1761 46,0 55,0
14BG186-0BB 6,00 21,3 882 1770 14,2 35,0 14BG223-0AB 30,0 42,6 878 1764 52,0 63,0
14BG207-0BB 9,00 32,2 882 1770 21,5 52,0 14BG253-0AB 38,4 54,1 882 1770 67,0 80,0
14BG220-0BB 11,4 40,3 882 1770 26,0 64,0 14BG280-0AB 45,6 64,4 886 1774 78,0 94,0
14BG223-0BB 13,8 48,3 888 1776 30,5 75,0 14BG283-0AB 55,2 77,1 888 1776 95,0 114
14BG253-0BB 17,4 59,8 888 1776 38,0 94,0 14BG310-0AB 67,2 94,3 888 1776 114 140
14BG280-0BB 22,8 80,5 888 1776 49,0 124 14BG313-0AB 93,6 132 890 1783 166 192
14BG283-0BB 27,6 95,5 888 1776 58,0 146 14BG316-0AB 110 155 886 1774 180 225
14BG310-0BB 31,2 109 893 1788 66,0 172 14BG317-0AB 138 184 886 1778 215 260
14BG313-0BB 36,0 132 893 1786 82,0 215
14BG316-0BB 42 161 893 1783 88,0 245
14BG317-0BB 54 201 893 1788 124 315
Technical data for standard execution, S1- duty, IP55, 380-420V 50Hz. ( Separate windings)
Fan / pump duty
Output AMP
RPM
Type kW (400)
Low High Low High Low High
7AA90L23 - V2 0,18 0,75 715 1445 1,40 2,20
7AA90L23 - V2 0,29 1,00 690 1420 1,50 2,60
7AA100L23 - V2 0,37 1,50 720 1455 2,10 4,10
7AA100L23 - V2 0,50 2,20 710 1435 2,50 5,40
7AA112M23 - V2 0,60 3,00 730 1445 3,30 6,70
7AA132S23 - V2 0,55 4,00 740 1465 2,80 8,80
7AA132M23 - V2 0,85 5,50 735 1455 3,70 10,8
7AA160M23 - V2 1,40 6,00 730 1475 5,00 13,2
7AA160L23 - V2 1,60 12,0 735 1465 5,60 24,3
400
Formula for current with new voltage: I'n (new) = In (with 400V) • Other voltages on request
U (new voltage)
14
Lönne electric motors
Standard motors from LÖNNE are characterized by their flexibility, ruggedness and energy efficiency.
In general, all motors are suitable frequency inverter- fed operation with line voltages up to 460V +10 %. The motors
are designed to fulfill the requirements of the European and International marked.
National standards
The motors comply with the IEC or European standard like 60034-1. The European standards replace the national
standards in the following countries: Germany (VDE), France (NF C), Belgium (NBNC), Great Britain (BS), Italy (CEI),
Netherlands (NEN), Sweden (SS), Switzerland (SEV). Etc.
The motors also comply with various national standards. The following standards (with the exception of non
standard motors) Have been harmonized with IEC publication 60034-1 or replaced with DIN EN 60034-1 so that the
motors can be operated at standard rated output.
Tolerances for electrical data

According to DIN EN 60034, the following tolerances are permitted. Motors which comply with DIN EN 60034-1 must
have a voltage tolerance of ±5 % / frequency tolerance of ±2 % (Category A). If utilized, the permitted limit
temperature of the temperature class may be exceeded by 10 K. A tolerance of ±5 % also applies to the rated
voltage range in accordance with DIN EN 60034-1. The motors comply also with category B (combination of
voltage deviation ±10 % and frequency deviation +3 / -5 %) for voltage and frequency fluctuations. The motors
can supply the rated torque in both category A and B.

-1 - cos φ
Power factor
6
Minimum absolute value: 0.02

Maximum absolute value: 0.07
Slip ±20 %(for motors <1kW ±30 % is permissible)
Locked- rotor current +20%
Locked- rotor torque -15% to +25%
Breakdown torque -10%
Moment ofinertia ±20%
Australia
AS 1359 (Higher output assignment than stated in DIN EN 50347 for frame size
250M and above)
CSA C22.2.No 100 Canada

Is325
India
Is 4722
NEK- EIC60034-1 Norway
15
Dimensions Shaft/ Flanges

Shaft B5 Flange
IEC Type D E F G +GD IEC Type M N P LA S T
63 63 11 23 4 12,5 63 All 115 95 140 8 4xØ10 3
71 71 14 30 5 16 71 All 130 110 160 9 4xØ10 4
80 80 19 40 6 21,5 80 All 165 130 200 10 4xØ12 4
90 90S 24 50 8 27 90 All 165 130 200 10 4xØ12 4
90L 24 50 8 27 100 All 215 180 250 11 4xØ15 4
100 100L 28 60 8 31 112 All 215 180 250 11 4xØ15 4
112 112M 28 60 8 31 132 All 265 230 300 12 4xØ15 4
132 132S,M 38 80 10 41 160 All 300 250 350 13 4xØ19 5
160 160M,L 42 110 12 59 180 All 300 250 350 13 4xØ18 5
180 183,186,188 48 110 14 51,5 200 All 350 300 400 15 4xØ18 5
200 207,208 55 110 16 59 225 All 400 350 450 16 4xØ18 5
225S 220-4,8 60 140 18 64 250 All 500 450 550 18 4xØ18 5
225M 223,228-2 55 110 16 59 280 All 500 450 550 18 4xØ22 5
223,228-4,6,8 60 140 18 64 315 310,13,16,17,18,19-2 600 550 660 22 4xØ22 6
250M 253,258,2 60 140 18 64 310,13,16,17 -4,6,8 600 550 660 22 4xØ22 6
253,258-4,6,8 65 140 18 69 318 -4 ; 319 -4,6,8 740 680 800 25 4xØ24 6
280S 280-2 65 140 18 69 355 All 740 680 800 - 4xØ28 6
280-4,6,8 75 140 20 79,5 400 All 940 880 1000 - 4xØ28 6
315S 310-2 65 140 18 69 450 All 940 880 1000 - 4xØ28 6
310-4,6,8 80 170 22 85 500 All 1080 1000 1150 - 4xØ28 6
315M 313-2 65 140 18 69
313-4,6,8 80 170 22 85
B14A Flange
315L 316,317-2 65 140 18 69
316,317-4,6,8 80 170 22 85 IEC Type M N P S T
318,319-2 65 140 18 69 63 All 75 60 90 M5 3
312,318,319-4 85 170 22 90 71 All 85 70 105 M6 3
318-6,8 80 170 22 85 80 All 100 80 120 M6 3
312,319-6,8 85 170 22 90 90 All 115 95 140 M8 3
355 355-2 80 170 22 85 100 All 130 110 160 M8 4
355-4,6,8 100 210 28 110 112 All 130 110 160 M8 4
400 400-2 80 170 22 85 132 All 165 130 200 M10 4
400-4,6,8 110 210 28 120
450 450-6,8 120 210 32 130
500 500-8 140 250 36 155 B14B Flange
IEC Type M N P S T
Data for second shaft execution on request.
63 All 100 80 120 M6 3
71 All 115 95 140 M8 3
80 All 130 110 160 M8 4
90 All 130 110 160 M8 4
100 All 165 130 200 M10 4
112 All 165 130 200 M10 4
Notes on the dimension

Dimension drawings according to DIN EN 50347 and IEC 60072
Dimension designation Shaft Dimension Dimension designation Dimension
ISO fit acc. to DIN ISO 286-2 Dimension Permitted devitation
D, DA <30mm j6 A, B <250 ±0,75

>30<50 k6 >250<500 ±1,0
Over 50 m6 >500<750 ±1,5
>750<1000 ±2,0
N <250 j6 M <200 ±0,25
>250 h6 >200<500 ±0,5
>500 ±1,0
F, FA H9 H >200 ±0,5
<250 ±1,0
E, EA -0,5
The bore holes in couplings and belt pulleys should have an The keyways and the featherkeys (bold dimensions GA, GC, F and FA) conform to
ISO of at least H7. DIN 6885, Part 1
All dimensions stated are in mm

The shaft extensions specified in the dimension tables (DIN 748) and centring spigot diameters (DIN 42 948) specified in the dimension tables
concerning all motors in this catalogue, are designed with the following fits: ISO fit acc. To DIN ISO 286-2
16
Illustration, dimensions Shaft/ Flanges

Shaft and rotor
Shaft extension Diameter Thread

mm mm
60° centre hole to DIN 332. Part 2 withM3 to M24 tapped hole
depending on the shaft diameter. (see dimension tables). 7… 10 DR M3
>10… 13 DR M4
The second shaft extension can transmit the full rated output via an
output coupling up to frame size 315M(please enquire about reduced >13… 16 DR M5
transmitted power for frame size 315L and above).
>16… 21 DR M6
Please also enquire about the transmitted power and maximum >21… 24 DR M8
cantilever force if belt pulleys, chains or gear pinions are used on the
second shaft extension. >24… 30 DR M10
>30… 38 DR M12
The non drive end (NDE) of frame sizes 100L to 160L has an M8 centre
hole, DR form. The non drive end (NDE) of the 14BG and 16BG motors >38… 50 DR M16
of frame sizes 180M to 315L, has an M16 centre hole, DS form.
>50… 85 DR M20
>85… 130 DR M24
Dimensions and tolerances for

keyways and keys are in designed to
DIN EN 50347. The motors are always
supplied with a key inserted in the
shaft.
17
Overall Dimensions Illustration 7AA, 7BA, 14BG
(IM1001- B3)
(IM3001- B5)
18
Overall Dimensions 7AA, 7BA, 14BG

IEC Type A AA AB AC B BB C H HA HD HG K KA L LF W
63 7AA 63 100 27 120 118 80 96 40 63 7 164 101 6 9 170 - M16/ M25

71 7AA 71 112 31 132 139 90 106 45 71 7 182 111 7 10 240/240* - M16/ M25
80 7AA 80 125 31 1150 157 100 118 50 80 8 200 120 9 13 274/314 - M16/ M25
90 7AA 90S 140 31 165 174 100 143 56 90 10 218 128 10 14 331 - M16/ M25
7AA 90L 140 31 165 174 125 143 56 90 10 218 128 10 14 331/374* - M16/ M25
100 7AA/7BA 100L 160 42 196 196 140 176 63 100 12 234/260** 134 12 16 372/409* 363/400* M32
112 7AA/7BA112M 190 46 226 220 140 176 70 112 12 259/287** 147 12 16 393/432* 385/423* M32
132 7AA/7BA 132S 216 53 256 259 140 180 89 132 15 296/323** 164 12 16 454 426 M32
132 7AA/7BA 132M 216 53 256 259 178 218 89 132 53 296/323** 164 12 16 454/ *** 426/ *** M32
160 7AA/7BA 160M 254 60 300 314 210 256 108 160 18 351/383** 191 12 16 588 531 M32
160 7AA/7BA 160L 254 60 300 314 254 300 108 160 18 351/383** 191 12 16 588 531 M40
180M 14BG 183-2,4 279 65 340 364 241 328 121 180 20 442 262 15 19 670 760 M40
180L 14BG 186-4,6,8 279 65 340 364 279 328 121 180 20 442 262 15 19 720 810 M40
14BG 188-2,4,6,8 279 65 340 364 279 328 121 180 20 442 262 15 19 720 810 M40
200L 14BG 206-2,6 318 70 380 402 305 355 133 200 25 500 300 19 25 720 810 M50
14BG 207-2,4,6,8 318 70 380 402 305 355 133 200 25 500 300 19 25 720 810 M50
14BG 208-2,6 318 70 380 402 305 355 133 200 25 500 300 19 25 777 867 M50
14BG 208-4,8 318 70 380 402 305 355 133 200 25 500 300 19 25 720 810 M50
225S 14BG 220-4,8 356 80 436 445 286 361 149 225 34 550 325 19 25 790 890 M50
225M 14BG 223-2 356 80 436 445 311 361 149 225 34 550 325 19 25 760 860 M50
14BG 223-4,6,8 356 80 436 445 311 361 149 225 34 550 325 19 25 790 890 M50
14BG 228-2 356 80 436 455 311 361 149 225 34 550 325 19 25 820 920 M50
14BG 228-4,6,8 356 80 436 455 311 361 149 225 34 550 325 19 25 850 950 M50
250M 14BG 253-2 406 100 490 495 349 409 168 250 40 642 392 24 30 890 990 M63
14BG 253-4,6,8 406 100 490 495 349 409 168 250 40 642 392 24 30 890 990 M63
14BG 258-2 406 100 490 495 349 409 168 250 40 642 392 24 30 890 990 M63
14BG 258-4 406 100 490 495 349 409 168 250 40 642 392 24 30 960 1060 M63
14BG 258-6,8 406 100 490 495 349 409 168 250 40 642 392 24 30 890 990 M63
280S 14BG 280-2 457 100 540 555 368 479 190 280 40 712 432 24 30 960 1070 M63
14BG 280-4,6,8 457 100 540 555 419 479 190 280 40 712 432 24 30 960 1070 M63
280M 14BG 283-2 457 100 540 555 419 479 190 280 40 712 432 24 30 960 1070 M63
14BG 283-4,6,8 457 100 540 555 419 479 190 280 40 712 432 24 30 960 1070 M63
14BG 288-2 457 100 540 555 419 479 190 280 40 712 432 24 30 1070 1180 M63
14BG 288-4 457 100 540 555 419 479 190 280 40 712 432 24 30 1070 1180 M63
14BG 288-6,8 457 100 540 555 419 479 190 280 40 712 432 24 30 960 1070 M63
315S 14BG 310-2 508 120 610 610 406 527 216 315 50 975 660 28 35 1072 1182 M63
14BG 310-4,6,8 508 120 610 610 457 527 216 315 50 975 660 28 35 1102 1212 M63
315M 14BG 313-2 508 120 610 610 457 527 216 315 50 975 660 28 35 1072 1182 M63
14BG 313-4,6,8 508 120 610 610 457 527 216 315 50 975 660 28 35 1072 1182 M63
315L 14BG 316/317-2 508 120 610 610 508 578 216 315 50 975 660 28 35 1232 1342 M63
14BG 316/317-4,6,8 508 120 610 610 508 578 216 315 50 975 660 28 35 1262 1372 M63
14BG 318-2 508 120 610 610 508 666 216 315 50 975 660 28 35 1372 1482 M63
14BG 318-4,6 508 120 610 610 508 578 216 315 50 975 660 28 35 1402 1512 M63
14BG 318-8 508 120 610 610 508 578 216 315 50 975 660 28 35 1262 1372 M63
14BG 319-2 508 120 610 610 508 666 216 315 50 975 660 28 35 1372 1482 M63
14BG 319-4 508 120 610 610 508 666 216 315 50 975 660 28 35 1546 1656 M72
14BG 319-6,8 508 120 610 610 508 666 216 315 50 975 660 28 35 1486 1596 M72
355 355-2 630 315 760 790 630 1140 254 355 52 1020 665 35 35 1840 2020 -
355-4,6,8 630 315 760 790 630 1140 254 355 52 1020 665 35 35 1940 2080 -
400 400-2 686 160 810 865 710 1120 280 400 45 1100 700 35 35 1880 2060 -
400-4,6,8 686 160 810 865 710 1120 280 400 45 1100 700 35 35 1925 2065 -
450 450-6,8 800 225 980 1035 900 1495 280 450 45 1310 860 35 35 2400 2540 -
500 500-8 900 180 1080 1095 1120 1600 315 500 65 1365 865 42 42 2520 2620 -
These dimensions are considered as basic in accordance with IEC 72
*Note: extra type with higher outputs(sample 63M02V)
**Note: HD dimension Type 7BA
***Note:Measures for 132M0..V on request
19
Overall Dimensions Illustration 9AA, 1TZ9, 16BG
(IM1001- B3)
(IM3001- B5)
20
Overall Dimensions 9AA, 1TZ9, 16BG

IEC Type A AA AB AC B BB C H HA HD HG K KA L LF W
80 9AA80M02K 125 30,5 150 163 100 118 50 80 8 200 120 9,5 13,5 273,5 299,5 M16/ M25
9AA80M 2,4 125 30,5 150 163 100 118 50 80 8 200 120 9,5 13,5 308,5 334,5 M16/ M25
90 9AA90S 2,4 140 30,5 165 180 100 143 56 90 10 218 128 10 14 331 382,5 M16/ M25
9AA90L 2,4 140 30,5 165 180 125 143 56 90 10 218 128 10 14 358 409,5 M16/ M25
100 1TZ9100L 160 42 196 198 140 176 63 100 12 266 166 12 16 395,5 428,5 M32
1TZ9100L* 160 42 198 198 140 176 63 100 12 266 166 12 16 430,5 463,5 M32
112 1TZ9112M 190 46 226 222 140 176 70 112 12 289 177 12 16 389 422 M32
1TZ9112M* 190 46 226 222 140 176 70 112 12 289 177 12 16 414 447 M32
132 1TZ9132S 216 53 256 262 140 218 89 132 15 334 202 12 16 465 500,5 M32
1TZ9132M 216 53 256 262 178 218 89 132 15 334 202 12 16 465 500,5 M32
1TZ9132M* 216 53 256 262 178 218 89 132 15 334 202 12 16 515 550,5 M32
160 1TZ9160M 254 60 300 314 210 300 108 160 18 396,5 236,5 15 19 604 638 M40
1TZ9160L 254 60 300 314 254 300 108 160 18 396,5 236,5 15 19 604 638 M40
1TZ9160L* 254 60 300 314 254 300 108 160 18 396,5 236,5 15 19 664 698 M40
180M 16BG183-2 279 65 340 364 241 328 121 180 20 442 262 15 19 720 810 M40
16BG183-4 279 65 340 364 241 328 121 180 20 442 262 15 19 670 760 M40
180L 16BG186-4,6,8 279 65 340 364 279 328 121 180 20 442 262 15 19 720 810 M40
200L 16BG206-2 & 6 318 70 380 402 305 355 133 200 25 500 300 19 25 720 810 M50
16BG207- 2 & 6 318 70 380 402 305 355 133 200 25 500 300 19 25 777 867 M50
16BG207- 4 & 8 318 70 380 402 305 355 133 200 25 500 300 19 25 720 810 M50
225S 16BG220- 4 & 8 356 80 436 445 286 361 149 225 34 550 325 19 25 790 890 M50
225M 16BG223-2 356 80 436 445 311 361 149 225 34 550 325 19 25 820 920 M50
16BG223-4,6,8 356 80 436 445 311 361 149 225 34 550 325 19 25 850 950 M50
250M 16BG253-2 406 100 490 495 349 409 168 250 40 642 392 24 30 890 990 M63
16BG253-4 406 100 490 495 349 409 168 250 40 642 392 24 30 960 1060 M63
16BG253- 6 & 8 406 100 490 495 349 409 168 250 40 642 392 24 30 890 990 M63
280S 16BG280-2 457 100 540 555 368 479 190 280 40 712 432 24 30 960 1070 M63
16BG280- 4,6,8 457 100 540 555 368 479 190 280 40 712 432 24 30 960 1070 M63
280M 16BG283-2 457 100 540 555 419 479 190 280 40 712 432 24 30 1070 1180 M63
16BG283-4 457 100 540 555 419 479 190 280 40 712 432 24 30 1070 1180 M63
16BG283-6 & 8 457 100 540 555 419 479 190 280 40 712 432 24 30 960 1070 M63
315S 16BG310-2 508 120 610 610 406 527 216 315 50 815 500 28 35 1072 1182 M63
16BG310-4,6,8 508 120 610 610 406 527 216 315 50 815 500 28 35 1102 1212 M63
315M 16BG313-8 508 120 610 610 457 527 216 315 50 815 500 28 35 1102 1212 M63
16BG313-2 508 120 610 610 457 578 216 315 50 815 500 28 35 1232 1342 M63
16BG313-4 & 6 508 120 610 610 457 578 216 315 50 815 500 28 35 1262 1372 M63
315L 16BG316-2 508 120 610 610 508 578 216 315 50 815 500 28 35 1232 1342 M63
16BG316- 4 & 6 508 120 610 610 508 578 216 315 50 815 500 28 35 1262 1372 M63
16BG316-8 508 120 610 610 508 578 216 315 50 815 500 28 35 1262 1372 M63
16BG317-8 508 120 610 610 508 578 216 315 50 815 500 28 35 1262 1372 M63
16BG317-2 508 120 610 610 508 666 216 315 30 815 500 28 35 1372 1482 M63
16BG317-4 & 6 508 120 610 610 508 666 216 315 30 815 500 28 35 1402 1512 M63
16BG318- 6 & 8 508 120 610 610 508 666 216 315 30 815 500 28 35 1402 1512 M63
16BG 318-2 508 120 610 610 508 648 216 315 50 815 500 28 35 1372 1517 -
16BG 312-2 508 120 610 610 508 648 216 315 50 815 500 28 35 1372 1517 -
16BG 318-4 508 120 610 610 508 666 216 315 50 815 500 28 35 1462 1607 -
16BG 312-4&6 508 120 610 625 508 666 216 315 30 815 500 28 35 1546 1691 -
16BG 312-8 508 120 610 625 508 666 216 315 30 815 500 28 35 1486 1631 -
These dimensions are considered as basic in accordance with IEC 72

*Note: extra type with higher outputs(sample 63M02V)
**Note: HD dimension Type 7BA
21
Single phase motors, Fan Pump Drive

Technical data for standard execution,S1- duty,IP55,230V 50Hz
Low start torque ( fan duty)
Output Amp. Ist. Mst. Mmax Kg Working cap. Starting cap.
Type RPM cos φ
kW (230V) In Mn Mn IM 1001 (450V) (320V)
7JB63M02K 0,18 2895 1,34 0,94 4,3 0,51 2,50 4,2 5
7JB63M02 0,25 2850 1,60 0,99 3,8 0,49 1,90 4,8 8
7JB71M02K 0,37 2895 2,85 0,87 4,2 0,50 2,70 6,2 12
7JB71M02 0,55 2860 4,15 0,89 4,0 0,42 2,10 8,1 16
7JB80M02K 0,75 2805 4,90 0,94 5,6 0,32 2,36 9,5 16
7JB80M02 1,10 2810 6,60 0,97 6,1 0,35 2,53 11,1 25
7JB90S02 1,50 2820 9,20 0,96 6,2 0,42 3,13 14,6 40
7JB90L02 2,20 2750 13,4 0,98 4,5 0,37 1,75 17,3 50
7JB63M04K 0,12 1415 1,00 0,90 5,1 0,41 2,50 24,2 4
7JB63M04 0,18 1385 1,57 0,86 2,6 0,38 1,58 4,3 5
7JB71M04K 0,25 1400 1,86 0,99 2,6 0,54 1,66 4,9 10
7JB71M04 0,37 1395 2,65 0,95 2,3 0,54 1,58 6,2 14
7JB80M04K 0,55 1415 3,70 0,96 2,6 0,52 1,60 7,4 14
7JB80M04 0,75 1405 4,80 0,96 3,0 0,50 1,70 9,4 20
7JB80M04 0,75 1405 4,80 0,96 3,1 0,40 1,64 10,4 20
7JB90S04 1,10 1420 6,60 0,98 3,1 0,37 1,78 13,9 30
7JB90L04 1,50 1430 8,70 0,97 3,7 0,35 1,80 17,1 40
7JB100L04 2,20 1445 13,7 0,93 3,6 0,43 1,92 27,1 60
D- E-EA F- GD
Type 7JB A AA AB AC AD B BB C CA H HA HD HF K KA L LC LD LG W G- GB
DA FA - GF
66 202,5 232
63- M..K 63- M 100 27 120 118 94 80 96 40 63 7 164 77,5 7 10 69,5 75 11 23 4 8,5 4
92 228,5 258
71 112 30,5 132 139 94,5 90 106 45 83 71 7 182 87,5 7 10 240 278 63,5 75 14 30 5 11 5
94 273,5 324 M25X
80 80M02 125 30,5 150 156,5 103,5 100 118 50 80 8 200 96,5 9,5 13,5 63,5 75 19 40 6 15,5 6
137 316 366,5 1,5
143 331 389
90 90L02 140 30,5 165 173,5 109 100 143 56 90 10 218 105 10 14 79 75 24-19 50-40 8-6 20-15,5 7-6
186 374 432
100 160 42 196 196 138 140 176 63 100 12 263 123 12 16 425 102 120 28 60 8 24 7
22
Single phase motors, Constant Torque

Technical data for standard execution,S1- duty,IP55,230V 50Hz
High start torque

Output Amp. Ist. Mst. Mmax Kg Working cap. Starting cap.
Type RPM cos φ
kW (230V) In Mn Mn IM 1001 (450V) (320V)
7JE63M02K 0,18 2895 1,34 0,94 5,2 1,9 2,5 4,5 5 25
7JE63M02 0,25 2850 1,6 0,99 4,6 1,8 1,9 5,1 8 25
7JE71M02K 0,37 2800 2,7 0,94 3,9 1,4 1,66 6,5 10 40
7JE71M02 0,55 2820 3,55 0,95 4 1,4 1,72 8,5 12 40
7JE80M02K 0,75 2845 4,7 0,98 4,1 1,41 1,6 9,9 18 60
7JE80M02 1,1 2860 6,7 0,98 4,4 1,4 1,75 11,4 25 80
7JE90S02 1,5 2845 9,25 0,98 4,5 2 2,04 14,9 35 120
7JE90L02 2,2 2830 13,3 0,97 4,8 1,85 2,15 17,8 40 160
7JE100L02 3 2840 17,5 0,97 5,3 2,1 2,5 24,9 60 180
7JE63M04K 0,12 1415 1 0,9 3,65 1,94 1,57 4,5 4 16
7JE63M04 0,18 1385 1,57 0,86 3,7 1,77 1,66 5,3 5 25
7JE71M04K 0,25 1400 1,86 0,99 3,4 1,6 1,58 6,5 10 25
7JE71M04 0,37 1395 2,65 0,95 3,2 1,8 1,6 7,7 14 25
7JE80M04K 0,55 1415 3,7 0,96 3,6 1,7 1,7 9,8 14 40
7JE80M04 0,75 1405 4,8 0,96 3,9 1,91 1,64 10,9 20 60
7JE90S04 1,1 1420 6,6 0,98 3,8 1,62 1,78 14,3 30 80
7JE90L04 1,5 1430 8,7 0,97 4,3 1,85 1,8 17,4 40 120
7JE100L04 2,2 1440 12,9 0,96 4,4 2,6 1,92 27,6 60 180
Type 7JE A AA AB AC AD1 AD2 B BB C H HA HD HF K KA L LD LG W D E F G GD
253, 5
63- M..K 63- M 100 27 120 118 99 94 80 86 40 63 7 64 77,5 7 10 69,5 75 M25X 1,5 11 23 4 8,5 4
279, 5
71 112 30,5 132 139 99,5 94,5 90 106 45 71 7 182 87,5 7 10 292 63,5 75 M25X 1,5 14 30 5 11 5
80 125 30,5 150 156,5 94 94 100 118 50 80 8 200 96,5 9,5 13,5 328 63,5 75 M25X 1,5 19 40 6 15,5 6
90 140 30,5 165 173,5 109 114 100 143 56 90 10 218 104,5 10 14 383 79 75 M25X 1,5 24 50 8 20 7
100 160 42 196 196 138 138 140 176 63 100 12 263 123 12 16 458 102 120 M25X 1,5 28 60 8 24 7
23
Mounting Options
Standards
All Lönne- motors are manufactured according to norms as following standards:
EN 50347 EN 60034-6 EN 60034-11 IEC 60038

EN 60034-1 EN 60034-7 EN 60034-12 IEC 60085
EN 60034-2 EN 60034-8 EN 60034-14 DIN 42925
EN 60034-5 EN 60034-9 IEC 60072 DIN ISO 10816
On occations of ordering mounting forms

at frame size 315 or larger, please consult
Lönne. If foot mounted motors larger than
frame size 180 M are mounted on the wall,
it is recommended to support the motor
feet.
acc. EN 60034-7
24
Spare part Illustration

25
Terminal Marking/ Connections
26
Brakes
Design and mode of operation.
The brake takes the form of a single- disk brake with two friction via the armature disk against the friction surface by means of the
surfaces. springs. In the braked state there is a gap S Gap between the armature
disc and the solenoid component. To release the brake, the solenoid is
The braking torque is generated by friction when pressure Is applied by energized with DC voltage. The resulting magnetic force pulls the
one or more pressure springs in the deenergized state. armature disk against the spring force on to the solenoid component.
The brake is released electromagnetically. When the motor brakes, the The spring force is then no longer applied to the rotor which can rotate
rotor which can be axially shifted on the hub or the shaft, is pressed freely.
Operation Values for spring- operated brakes with standard excitation.

For Rated Brake Noise Dimension Lenght
Voltage AC via Current/ Brake Brake
motor brake applica- level Lp wlth increase on
Brake type rectifier to DC power release moment
Frame torque tion time rated all types
(Coil) time. Ms of inertia
Size Nm A W ms air gap db (A) ∆ l mm
63 2LM8 005-1NA10 5 AC 230 / DC205 0.11 20 25 56 77 0.000013 51
71 2LM8 005-2NA10 5 AC 230 / DC205 0.11 20 25 56 77 0.000013 51

80 2LM8 010-3NA10 10 AC 230 / DC205 0.14 25 26 70 75 0.000045 54
90 2LM8 020-4NA10 20 AC 230 / DC205 0.17 32 37 90 75 0.00016 75

100 2LM8 040-5NA10 40 AC 230 / DC205 0.22 40 43 140 80 0.00036 78
112 2LM8 060-6NA10 60 AC 230 / DC205 0.28 53 60 210 77 0.00063 87

132 2LM8 100-7NA10 100 AC 230 / DC205 0.31 55 50 270 77 0.0015 106
160 2LM8 260-8NA10 260 AC 230 / DC205 0.50 100 165 340 79 0.0073 129
180 2LM8 315-0NA10 315 AC 230 / DC205 0.56 100 152 410 79 0.0073 125
200 2LM8 400-0NA10 400 AC 230 / DC205 0.61 110 230 390 93 0.0200 137
225 2LM8 400-0NA10 400 AC 230 / DC205 0.61 110 230 390 93 0.0200 239
Design of the 2LM8 Spring- operated disk brake
Type U230
Technical data:
max.input voltage 275V AC
max.DC current 1A
magnetic coil
27
External Cooling Fan Unit

type 1~D 230- 3~Y 380-
Item name IP 3~D 220-290V 3~Y 380-500V 1~D 230-277V 3~D 220-332 V
number 277V 575V
size 63 A=151mm 17.00.0061 66 0,10A / 27W 0,10A / 29W 0,05A / 29W 0,11A / 38W 0,10A / 32W 0,06A / 32W
3~Y 380-
3~D 220-290V 3~Y 380-500V 3~D 220-400V
690V
size 225 A=411mm 17.00.1088 66 0,87A / 335W 0,5A / 335W 0,87A / 355W 0,5A / 335W
size 250 A=435mm 17.00.1089 66 0,87A / 335W 0,5A / 335W 0,87A / 355W 0,5A / 335W
3~Y 380-
3~D 220-400V 3~Y 380-690V 3~D 220-400V
690V
size 280 A=449mm 17.00.1090 66 1,58A / 650W 0,91A / 650 1,58A / 650W 0,91A / 650
size 315 A=473mm 17.00.1091 66 1,58A / 650W 0,91A / 650 1,58A / 650W 0,91A / 650
External cooling units dimension table

type item name b type number L+ A AF B D D1 Air Volume
size 63 A=151mm 17.00.0061 89,5 151 56 5,5 116 124 47m3/ h
size 71 A=165mm 17.00.0062 89,5 165 70 5,5 138 139 60m3/ h
size 80 A=166mm 17.00.0063 118,5 166 71 5,5 155 157 88m3/ h
size 90 A=195mm 17.00.0064 99,5 195 90 5,5 172 177 169m3/ h
size 100 A=200mm 17.01.0065 99 200 95 6 194 195 208m3/ h
size 112 A=255mm 17.00.0654 142 255 150 6 219 219 295m3/ h
size 132 A=252mm 17.00.0197 121 252 125 6 258 258 450m3/ h
size 160 A=295mm 17.00.0181 146 292 143 6 312 311 780m3/ h
DA
size 180 A=320mm 17.00.0284 120 320 168 50 350 311 860m3/ h
size 200 A=320mm 17.00.0283 115 320 168 55 390 311 950m3/ h
size 225 A=411mm 17.00.1088 194 411 216 65 424 385 1350m3/ h
size 250 A=435mm 17.00.1089 195 435 240 73 475 385 1500m3/ h
size 280 A=449mm 17.00.1090 205 449 249 73 525 480 2800m3/ h
size 315 A=473mm 17.00.1091 202 473 273 58 586 480 3200m3/ h
L + = Additional length to standard fan cover
28
Design, Painting Colours, Balance and Vibration Severity
Type Design
7AA63 - 90 Aluminium housing and terminal box(turnable 4x90°)
Aluminium housing and terminal box, cast iron end shields and flanges. The terminal box
7AA100 - 160 cable entries are located in the terminal box cast on the frame. (The cable entry rotate by
180°) Foot mounted motors of frame size 112-160 are of bolt on design. (FS 100 on request).
Cast iron housing, end- shields and flanges. Cast iron terminal box(turnable 4x90°) Foot
7BA100 - 160
mounted motors of frame size 100-160 are of bolt on design.
Aluminium housing and terminal box(turnable 4x90°), aluminium end shields and B5 flange.
1TZ9 A Flange B14 cast iron.Snap in fancover in reinforced plastic. Frame for B5 motors are
delivered with option for bolt on design.
Cast iron housing, end- shields and flanges. Cast iron terminal box(turnable 4x90°) Frame
14BG/16GB 180-315 size 180 – 315 Plastic fan cover, metal as option. Motors in mounting form B5, can be
modified with bolt on feet.
355 - 400 Cast iron housing, end- shields and flanges. Cast iron terminal box(turnable)
Colours and paint finish

All motors frame size 63 - 160 are painted with RAL 7030. Frame size 180-355 are painted with RAL 7005.
Balance and vibration severity.

All of the rotors are dynamically balanced wit half key. This corresponds to vibration severity grade N(normal). The vibrational characteristics
and behaviour of electrical machinery is specified in EN 60034-14.”Half key balancing” is specified here based on ISO 8821. The balancing is
stamped on the face of the shaft on the drive- end.
Limits of vibration severity in mm/ s. Effective shaft height H in mm
Free suspension Rigid installastion
Vibration severity grade Rated speed / rpm 56 < H ≤ 132 132 < H ≤ 225 225 < H ≤ 400 H > 400 H > 400
N 600 … 3600 1.8 2.8 3.5 3.5 2.8
600 … 1800 0.71 1.12 1.8 2.8 1.8

R (Reduced)
>1800 … 3600 1.72 1.8 2.8 2.8 1.8
600 … 1800 0.45 0.71 1.12
S (Special)
>1800 … 3600 1.71 1.12 1.8
Note that the measured values can deviate by ± 10% from the actual values. The limits stated in the table are applicable to freely suspended
motors running uncoupled and at no load. For frequency inverter - fed operation with frequencies greater than 6oHz, special balancing is
required for compliance with the specified limit values.
(Max speed)
29
Bearing and lubrication

The nominal bearing lifetime is defined acc. To standardized calculation procedures (DIN ISO 281).
Under average operating conditions. a lifetime (Lh10) of 100,000 hours can be achieved.
Frame size
Poles D- end bearing N- end bearing Lubrication
Type
7AA63 2 to 8 6201- ZZ C3 6201- ZZ C3 Closed non- lubricated bearings
7AA71 2 to 8 6202-2Z C3 6202-2Z C3 Closed non- lubricated bearings
7AA80 / 9AA 2 to 8 6204-2Z C3 6204-2Z C3 Closed non- lubricated bearings
7AA90 / 9AA 2 to 8 6205-2Z C3 6205-2Z C3 Closed non- lubricated bearings
7AA100 2 to 8 6206-2Z C3 6205-2Z C3 Closed non- lubricated bearings
7BA100 / 1TZ9 2 to 8 6206-2Z C3 6206-2Z C3 Closed non- lubricated bearings
7AA112 / 1TZ9 2 to 8 6206-2Z C3 6206-2Z C3 Closed non- lubricated bearings
7BA112 2 to 8 6306-2Z C3 6306-2Z C3 Closed non- lubricated bearings
7BA132 2 to 8 6308-2Z C3 6308-2Z C3 Closed non- lubricated bearings
Lubrication Quantity of
intervall(hours) Grease(gram)
7BA160 2 6309 C3 6309 C3 4000 h 20g
7BA160 2 to 8 6309 C3 6309 C3 8000 h 20g
14/16BG. Frame size 180 2 6310 C3 6310 C3 4000 h 20g
14/16BG. Frame size 180 4 to 8 6310 C3 6310 C3 8000 h 20g
14/16BG.310-317 Frame size 315 2 6316 C3 6316 C3 3000 h 30g
14/16BG.310-319 Frame size 315 6..8 6319 C3 6319 C3 6000 h 40g
Horizontally mounted motors and coolant temperature up to 40°C, the Electric Motors Marine and Industrial
grease lifetime should be: Type of grease for standard machines: (Fa.ESSO / UNIREX N3), grease
Approx. 40,000 operation hours for speeds of 1500 rpm lifetime and lubrication intervals are valid for this type of grease only.
Approx. 20,000 operation hours for speeds of 3000 rpm Compensatory greases must conform to DIN 51825- KL3N at least. In
Irrespective of the number of operation hours, the grease should be this case the lubrication intervals at KT > 25 °C are to reduced.
renewed every 3 years because of ageing. Special greases are introduced on the lubricating data plate. If the
In the case of motors operating under special conditions, such as coolant temperature is increased by 10K, the grease life and
vertical motor position, frequent operation at maximum speed nmax’ regreasing interval are halved. Only relubricate bearings when the
heavy vibration, sudden load changes and frequent reversing motor has a speed of at least n > 300 rpm.
operation, the bearing should be changed at considerably more
frequent intervals than at the operating hour stated above.
Sample of Lubrication nameplate

Insulated bearings
D- end bearing N- end bearing To prevent damage as a result of bearing currents, insulated bearings
can be supplied at the non- drive end NDE from frame size 225 to 315
6317C3 6317C3
and are recommended for frame size 280 and above.
Coolant temp. 40°C
Operating hours 8000 h
Quantity of D- end/ N- end 30 g
At each lubrication point. Press in during operation
Grease DIN 51 825 - K3P-20 Li- soap
Delivered with ESSO UNIREX N3
30
Degree of Protection

All motors are designed to IP55 degree of protection. They can be installed in dusty or humid environments. The motors are suitable for
operating in tropical climates. Guide value <60%, relative humidity at KT40°C.
Other requirements are available on request.
Most motors can be supplied in IP56 and IP65 degree of protection on request.
IP First number - Protection against solid objects
0 No special protection
1 Protected against solid objects up to 50mm, e.g.accidental touch by hands
2 Prodtected against solid objects up to 12mm, e.g. fingers
3 Protected against solid objects over 2.5mm (tools and wires)
4 Protected against solid objects over 1mm (tools, wire, and small wires)
5 Protected against dust limited ingress (no harmful deposit)
6 Totally protected against dust
IP Second number - Protection against liquids
0 No protection
1 Protection against vertically falling drops of water e.g. condensation
2 Protection against direct sprays of water ut to 15° from vertical
3 Protected against direct sprays of water ut to 60° from the vertical
4 Protection against water sprayed from all directions ° limited ingress permitted
5 Protected against low pressure jets of water from all directions ° limited ingress
6 Protected agains low pressure jets of water, e.g. for use on ship decks - limited ingress permitted
7 Protected aganist the effect of immersion between 15cm and 1m
8 Protects against long periods of immersion under pressure
31
Insulation System
For details of order codes for use in temperature class F, see "DURIGNIT Winding and insulation design with regard to temperature class and air
IR 2000 insulation system” under “windings and insulation". humidity
The following applies to all motors: The motors can withstand 1.5 times All motors are designed for temperature class F. At rated output with
the rated current at rated voltage and frequency for two minutes (DIN line- fed operation, the motors can be used in temperature class B.
EN 60034).
Temperature class F, used in accordance with F,
Ambient temperature:
All motors can be used in standard version at ambient temperatures with service factor (SF)
between – 20 and +40 °C. For all 7AA/7BA and 14BG motors for line- fed operation in frame sizes
Motors can be used in temperature class F 63 to 315 for rated output given in the selection table and rated output
given in the selection table and rated voltage, a service factor of 1.1
can be specified.
• at 40° C with service factor 1.1, i.e. the motor can be continuously
overloaded with 10 % of the rated output (for motors of 16BG and 9AA
series, with the exception of 9AA with increased output, with service Temperature class F, used in accordance with F,
factor 1.15, i.e. 15 % of the rated output).
for increased output
For motors supplied from stock for use in accordance with temperature
• above 40° C at rated output class F, the rated output according to the selection and ordering data
can be increased by 10 %.
When motors are used in temperature class B for higher ambient
temperatures and site altitudes derating occurs in accordance with
the table “ Reduction factor k HT for different site altitudes and/ or
Temperature class H for rated output and
ambient temperatures”. maximum ambient temperature (AT) 60 °C
For motors of series 7AA/7BA and 14BG use in accordance with
temperature class H is permitted at rated output and at a maximum
For other temperatures special measures are necessary. When brakes
ambient temperature of a 60 °C. The specified grease life applies at an
are to be mounted on motors intended for operation at temperatures
ambient temperature of 40 °C. For a 10 K increase in ambient
below freezing , please contact your local Lönne office.
temperature, the grease life of lubrication interval is halved.
Please contact your local Lönne office.
Winding and insulation
Temperature class F, used in accordance with B,
DURIGNIT IR 2000 insulation system ambient temperature 45 °C, approx. 4% derating
For motors of series 7AA/7BA and 14BG a version can be ordered that
The DURIGNIT IR 2000 insulation system comprises high- grade is designed to temperature class F, for use in accordance with
enameled wires and insulating sheet materials combined with solvent- temperature class B at a maximum ambient temperature of 45 ºC at
free impregnating resin. 4% derating.
The system ensures a high level of mechanical and electrical strength

as well as good serviceability and a long motor life. The insulation
system protects the winding against aggressive gases, vapours, dust,
oil and increased air humidity. It can withstand the usual vibration
stressing. The insulation is suitable up to an absolute air humidity of 30
g water per m3 of air. Moisture condensation should be prevented
from forming on the winding. Please contact your local Lönne office if
higher values are present. Please enquire about extreme applications.
32
Ambient Temperature and Humidity
Temperature class F, used in accordance with B, Increased air temperature/ humidity with more
ambient temperature 50 °C, approx. 8% derating than 60 g up to 100 g water per m3 of air
For motors of series 7AA/7BA and 14BG a version can be ordered that For motors of series 7AA/7BA and 14BG a version can be ordered for
is designed to temperature class F, for use in accordance with increased air humidity of between 60 and 100 g water per m3 of air
temperature class B at a maximum ambient temperature of 50 ºC at depending on the temperatures as listed in table below. In this case,
8% derating. the external bolts can be supplied in rust- proof material. This option
not include any condensation protection, so an anticondensation
heater (order code K45/ K46) must be ordered separately if required.
Temperature class F, used in accordance with B, Please contact your local Lönne office.
ambient temperature 55 °C, approx. 13% derating
For motors of series 7AA/7BA and 14BG a version can be ordered that
is designed to temperature class F, for use in accordance with
Increased air temperature/ humidity with 30 to 60
temperature class B at a maximum ambient temperature of 55 ºC at g water per m3 of air
13% derating. For motors of series 7AA/7BA and 14BG a version can be ordered for
increased air humidity of between 30 and 60 g water per m3 of air
depending on the temperatures as listed in table below. In this case,
Temperature class F, used in accordance with B, the external bolts can be supplied in rust- proof material. This option
ambient temperature 60 °C, approx. 18% derating not include any condensation protection, so an anticondensation
For motors of series 7AA/7BA and 14BG a version can be ordered that heater ( order code K45/ K46) must be ordered separately if
is designed to temperature class F, for use in accordance with required.Please contact your local Lönne office.
temperature class B at a maximum ambient temperature of 60 ºC at
18% derating.Please contact your local Lönne office.

Relativehumidity Temp
30° C 40° C 50° C 60° C 70° C 80° C 90° C
20° C
10% 2 3 5 8 13 20 29 42
15% 3 5 8 12 19 30 44 63
20% 3 6 10 17 26 39 58 84
25% 4 8 13 21 32 49 73 105
30% 5 9 15 25 39 59 87 126
35% 6 11 18 29 45 69 102 146
40% 7 12 20 33 52 79 116 167
45% 8 14 23 37 58 89 131 188
50% 9 15 26 41 65 98 145 209
55% 10 17 28 43 71 108 160 230
60% 10 19 31 50 78 118 174 251
65% 11 20 33 54 84 128 189 272
70% 12 21 36 58 91 138 203 293
75% 13 23 38 62 97 148 218 314
80% 14 24 41 66 104 157 233 335
85% 15 26 43 70 110 167 247 356
90% 16 27 46 74 117 177 262 377
95% 16 29 49 79 123 187 276 398
100% 17 30 51 83 130 197 291 419
The values in the table with a light blue background are covered by the standard version (up to 30 g water per m3 of air)
The values in the table with a light grey background are covered by order code C19 (30 to 60 g of water per m3 of air)
The values in the table with a medium blue background are covered by order code C26 (60 to 100 g of water per m3 of air)
Please contact your Lönne office regarding requirements exceeding 100 g water per m3 of air.
33
Motor Protection and Anti Condensation Heaters
For current- sensitive motor protection, the protective switch has to be set to the rated current given on the name plate.
This motor protection is inadequate for high number of operations, short- time operation, coolant breakdown or for
fluctuations in coolant temperature. In this case motors should be protected by direct temperature protection (extra
price):
Thermal protector switch

When reaching the limiting temperature,the switch opens the control circuit. The NC- switch closes the circuit when
the temperature decreases essential.
Contact rating: 1,6 Amps for 250 VAC.
Thermistor protection
The embedded temperature sensors are able to work only in conjunction with a tripping unit. When reaching the
limiting temperature, the thermistor changes its resistance almost Instantaneousely.
This action is utilized in conjunction with the tripping unit to monitor motor temperature. The relay incorporated in the
device has a change- over contact, in which the contacts can be used for the control system.
Advantages: the protection system is self- monitoring; low switching tolerance;quick reconnection of the drive.
Measuring of winding or bearing temperatures

The temperature of the motor winding or bearings can be directly measured by incorporated temperature sensors PT
100 or KTY- sensors.
In standard the connection of the temperature protection is with a terminal block inside the main terminal box.
On request the connection in a separate mounted terminal box is possible.

WARNING: Thermometer voltage max 1V / Thermistors voltage max 5V.
Anti condensation heaters
Frame size Anti- condensation heaters
230V 115V
63-71 8W Code 1VT 8W Code 1VT
80 12,5W Code 1VT 12,5W Code 1VT
160 40W Code 1VT 40W Code 1VT
180 50W Code K45 50W Code K46
200 55W Code K45 55W Code K46
225-250 92W Code K45 92W Code K46
280-315 109W Code K45 105W Code K46
Motors whose windings area at risk of condensation due the climatic conditions, e, g, inactive motors in humid
atmospheres or motors that are subjected to widely fluctuating temperatures can be equipped with anticondensation
heaters.
34
Technical information Noise Level

Mechanical design
Noise(mains- fed operation) A- weighted measuring- surface sound pressure level and sound power levet at rated power
Standard design
The noise levels are measured in ac-
cordance with DIN EN 21 680-1 in a dead room Type series Size Measuring- surface sound pressure level (LpfA)
with rated power. LpfA is specified in dB (A) as
Sound power level (LWA)
the A- weighted measuring- surface sound
pressure level. 2- pole 4- pole 6- pole 8- pole
LpfA LWA LpfA LWA LpfA LWA Lpfa LWA
This value is the spatial mean value of the test
hemisphere. This test is hemisphere is a dB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A) dB(A)
cuboid at a distance of 1 m from the machine
surface. In addition, the sound power level 7BA 63 49 60 42 53 39 50 - -
LWA is specified in dB (A). The values are 71 52 63 44 55 39 50 36 47
applicable at 50 Hz with a tolerance of + 3 dB.
They are approximately 4 dB (A) higher at 60 80 56 67 47 58 40 51 41 52
Hz. Please enquire about the noise levels for
90 60 72 48 60 43 55 41 53
polechanging motors, motors with an
increased power output or motors for 100 62 74 53 65 47 59 45 57
converter- fed operation.
112 63 75 53 65 52 64 49 61
132 68 80 62 74 63 75 53 65
160 70 82 66 78 66 78 63 75
14BG 180 69 82 65 78 59 72 67 80
200 73 86 66 79 59 72 57 70
225 73 86 66 79 60 73 61 74
250 75 88 67 80 61 74 55 68
280 74 87 70 83 61 74 58 71
315 79 92 70 83 65 78 64 77
16BG 180 67 80 60 73 56 69 66 79
200 71 84 62 75 59 72 66 79
225 71 84 60 73 59 72 58 71
250 71 84 65 78 60 73 57 70
280 73 86 67 80 58 71 58 71
315 76 89 68 81 61 74 64 77
14BG 180 71 84 65 78 59 72 67 80
increased 200 73 86 66 79 61 74 57 70
power 225 73 86 66 79 60 73 61 74
250 75 88 67 80 61 74 55 68
280 74 87 70 83 61 74 58 71
315 - - - - 65 78 64 77
In order to reduce noise levels, 2- pole motors

with frame size 132 S or larger can be fitted Low- noise design
with an axial- flow fan that is suitable for one Type series Size 2- pole motors
direction of rotation only.
LpfA LWA
Clockwise rotation dB(A) dB(A)
Order Code K37
7AA // BA 132 64 76 The motors up to frame size 315 L
Antiklockwise rotation 160 64 76 are up to 80 mm longer than
Order Code K38 normal. A second shaft extension
14BG/16BG 180 65 78 and or rotary pulse encoder
mounting is not possible.
1) The standard motors have an axial- flow fan for 2) 200 70 83
clockwise rotation. Order Code K37 is not needed
For counterclockwise rotation please state Order 225 68 81
Code K38. 280 72 85
2) Not required for 16BG motors because these
motors are already noise optimized. 315 74 87
35
Safety and Commissioning for Low Voltage Asynchronous Motors
In accordance with L.V. directive 73/23/ EEC Tighten the eyebolts. They are designed for the weight of the motor
only therefore do not attach any additional loads. If necessary, use
suitable, adequately dimensioned transporting equipment (e.g. rope
1 General Information guides). Remove existing shipping braces before commissioning; and
reuse for subsequent transport. If motors are stored, a dry, dust- free
and low vibration (Vrms <0.2 mm/ s) environment is important (to avoid
Electric motors have dangerous voltage carrying and rotating bearing standstill damage). On longterm storage, the regrease interval
components as well as surfaces that may become hot. All work of the bearings is reduced. Before commissioning, measure the
involved in the transport, connection, commissioning and regular impedance of the insulation. It values <1kW per volt of rated voltage
maintenance must be carried out by qualified, responsible specialists are measured; the windings must he dried out. When motors with roller
(note VDE 0105; IEC 364). improper behaviour may result in serious bearings for increased cantilever force are operated the, value of
injury and damage to property. The applicable national, local and cantilever force must be minimal 30% of permissible cantilever force
works regulations and requirements must be complied with. (see catalogue). Operating with smaller cent lever force is the cause
of bearing faults.
2 Intended use
These motors are intended for commercial installations. They comply 4 Installation
with the harmonized standards of the EN60034 (VDE 0530) series.
Utilization in areas subject to explosion hazard is not permitted, unless
expressly Intended for this purpose (see additional notes). In certain Ensure an even underlying surface, good foot or flange fixing and
special cases, for example. On use in noncommercial installations, it precise alignment for direct coupling. It is important to ensure that the
requirements are more strict (e.g. protection against contact with mounting conditions do not cause resonance with the rotational
children’s fingers), is it the responsibility of the customer to ensure frequency and the doubled supply frequency. Turn the rotor by hand
compliance on installing the equipment. The motors are rated for and listen for any unusual grinding noises. Check the direction of
ambient temperatures of -20oC to +40oC and site altitudes <1000m rotation in the decoupled state (note section 5).
above sea level. Any contradictory information. On the rating plate
must be observed. The conditions on site must correspond to all rating Only mount or remove drive components (belt pulley, coupling, etc.)
plate specifications. Low voltage motors are components for using suitable tools (heat up), and cover to shield against contact.
installation in machinery in terms of the Machine directive 89/392/ EEC, Avoid unpermissible belt tensions (see catalogue and technical data).
Commissioning must not take place until it has been proved that the The balancing type is specified on the shaft end face or rating plate (H
end product conforms with this guideline (please note EN 60204-1). =half- and F= full- key balancing). On mounting the drive, note the
balancing type! In the case of half key balancing, the protruding,
visible part of the half featherkey must be removed. A canopy is
3 Transport and storage recommended for designs with the shaft end pointing downwards, and
with the shaft end pointing upwards a cover must be provided by the
Any damage detected after dispatch should be reported immediately customer to prevent foreign bodies from falling into the fan.
to the transport company and commissioning must be postponed.
36
Safety and Commissioning for Low Voltage Asynchronous Motors
Do not obstruct ventilation! Discharged air, also from neighbouring circuits (e.g. Anti- condensation heaters).Check that the equipment is
equipment, must not be sucked In again immediately. Checking of potential- free! If the tolerance limits are exceeded that are specified
bearing grease must he carry out when motors are longer than 12 in EN 60034, part 1 / IEC 34-1 (voltage ± 5%, frequency ± 2%, shape of
months storage. When storage conditions are the cause of grease curve, symmetry) the heating effect is increased and the
depreciation (presence of condensate, consistency change) the electromagnetic compatibility is affected. Please note the
grease must be exhanged. Grease exhange must be carry out no later specifications on the rating plate and the connection diagram in the
than in three year interval. terminal box. Connections must be made in such a way as to ensure
that a permanently safe electrical connection is maintained (no
protruding wire ends) use the corresponding cable end pieces. Create
5 Electrical connection a safe earth continuity connectien.
Work is only permitted to be carried out by qualified specialists on the
stationary motor, while disconnected and prevented from being
switched on again. This also applies for the auxiliary power
Tightening torques for terminal board connections.

M4 M5 M6 M8 M10 M12 M16
Tightning tourque (Nm) 0,8...1,2 1,8...2,5 2,7...4 5,5...8 9...13 14...20 27...40
Clearances in air between bare live parts themselves and between dust and water. Secure the featherkey on test operation without drive
bare live parts and earth must be > 5,5 mm {U rated < 690 V) If must be components. For motors with brakes, check that the brakes are
ensured that the terminal box does not contain foreign bodies, dirt or operating perfectly before commissioning.
humidity. Seal any unused cable entry openings against
2 2 2 2 2
25 mm 10 mm 25 mm 10 mm 25 mm
If connections are made If connections are made

Connecting a single Connecting a single
with DIN cable lugs,band with DIN cable lugs, If connections are made
con- ductor with a con- ductor with a
the cable lugs under the outer earthing with DIN cable lugs.
terminal clip. terminal clip.
downwards. angle.
6 Operation
Vibration levels of Vrms<3,5mm/ s{PN £15 kW) or V rms < 4,5mm/ s (P N >15 For motors without regreasing facilities, bearing or grease replacement
kW} are quite acceptable in the coupled state. If deviations from must be carried out in accordance with the manufacturer’s
normal operation occur - e.g. increased temperatures, noises, instructions, or after 3 years, whichever is sooner. Bearings with
vibration - the motor should be switched off in the event of doubt. regreasing facilities must be regreased when the motor is running.
Determine the causes and contact the manufacturer if necessary. Do Please note the greasing plate!
not disconnect protective equipment, even under test operation.
Under dirty operating conditions, clean the air channels regularly. In case the motors with separate ventilation, the separately- driven fan
Open any closed condensate water holes from time to time! must be switched on throughout motor operation.
37
Optimal, Energy Saving Operations by Frequency Inverters
Inverter control of Lönne electric motor allows an optimal reliable operation and automatic energy
saving. Soft start and stop control reduces mechanical stress on the machine.
Lönne three- phase asynchronous electric motor is designed to be supplied directly from our warehouses as standard products or as tailor
supplied by a frequency inverter. made systems.Yaskawa’s inverters are supplied in 1- phase within
The rotation speed of an asynchronous motor depends on the supply power range 0,1 to 2,2 kW and 3- phase in respectively 0,25 to 110 kW
voltage frequency. (200-230VAC) and 0,4 to 630 kW (380-480VAC).
This motor can be driven up to the rated frequency with supply voltage
proportional to the frequency. At higher frequencies the motor can be Lönne is also a recognized manufacturer of large drive systems, and
supplied at constant voltage. Lönne electric motor offers a wide range our engineered solutions are supplied for power range up to 5600 kW.
of overload capacity and a high thermal reserve. All engineering is done in- house and our systems are based on water
cooled inverters from Converteam. Inverters are supplied in modular
The insulating materials are class F. units from 800 to 5600 kW.
Lönne is a significant supplier of frequency inverters for industrial For more information, please call us to ask for catalogues, advices or
applications, propulsion and seismic compressor systems in an an appointment.
international maritime market. As being a certified distributor for
Yaskawa, these inverters are kept in stock and can be
38
Flameproof Motors
Ex d, Ex de IIB, IIC tD IP65(A21)
Specifications
Cast - Iron
To norms IEC 600079-0, 60079-1, 60079 – 7 A21- tD
Ex- d, Ex- de Max surface temperature [°C] T150, T135, T100, T65
frame Size from 63 – 315 Protection IP55, IP56
ATEX category 1M2, 2G, 2GD To norms IEC 60034-1, 5, 6, 7, 8, 9, 12, 14, 60072
Group I (mine), IIB, IIC Output from 0,12 to 200 KW
Temperature class T3, T4, T5, T6 Three- phase 1 or 2 speed
To norms IEC, 61241-0, 61241-1
Aluminium available frame size from 56 to 80
Currently available on stock
2- Pole 0,55/0,63kW - 18,5/21kW 50/60Hz frame Size 71 – 160

4- Pole 0,37/0,42kW - 55 /63kW 50/60Hz frame Size 71 - 250
Frame Size 71 – 90

Voltage Range 220-240/380-420V 50Hz 254-277/440-480V 60Hz
Frame Size 100 – 250

Voltage Range 380-420/660-720V 50Hz 440-480V 60Hz
I2G Exde IIC T4 IP56 Ta40°C IC411 CLF

THREE- PHASE MOTOR
PROTECTION IP56 (WITH VENTILATION) NON CONDUCTIVE DUSTS
3XPTC THERMISTORS - 120°C
ANTICONDENSATION HEATERS 230V

PROTOTYPE TEST REPORT
COMPLIANCE WITH ATEX 94/9 DIRECTIVE
39
Type Approvals 14 BG/16BG and 14BL/16BL
40
Appendix
Environmental Protection - Information Requirement

Electric and electronic products, so- called EE products, may contain toxins which can damage our health and the
environment. Therefore, all importers and producers of EE products are obliged to take responsibility for their products
until they have been scrapped and recycled.
You may return any cast- off Lönne products to a Lönne Warehouse. Lönne is obliged to fulfil the authorities’
requirements regarding an environmentally sound handling of EE- waste in accordance with the EE regulations.
Price Policy
Prices are excl. VAT and packaging.
The exchange rate used for invoicing will be adjusted if it has changed by more than 2,00% in relation to the
NOK/ EUR exchange rate 8,10.
SEK/ EUR exchange rate 9,39
DKK/ EUR exchange rate 7,46
Terms of Sales and Delivery

Terms of sales and delivery are specified on our web site; www.lonne.com
General
All product names occurring or referred to in this catalogue are or may be registered trademarks belonging to their
respective producers or trademark owners.
The dimensions are in mm.

Illustrations are not binding.
General Export and Import Regulations regarding Lönne Product Range of Drives and Controls will be subject to the
Export Import Regulations actual in the area of delivery.
We hereby reserve the right to change the content of data in this catalogue at any time without notice. Furthermore,
our company shall not be held responsible for neither possible discrepancies in catalogue content nor any damage
caused by wrong use of products or information.
Lönne Scandinavia AS reserves the prohibition to publish pages or whole parts of this catalogue without athorization.
41
Solutions | Products | Services
Chapter 1 Electric Motors

Chapter 2 Variators
Chapter 3 Frequency Inverters
Chapter 4 Servo Controls
Chapter 5 Machine Controls
Chapter 6 Worm Gear Boxes
Chapter 7 Helical Gear Boxes
Chapter 8 Torque Arm Speed Reducers
Chapter 9 Planetary Gear Boxes
Chapter 10 V-belt and V-belt Pulleys
Chapter 11 Timing Belt and Timing Belt Pulleys
Oslo
Chapter 12 Chains and Sprockets
Bergen Helsinki
Chapter 13 Couplings Stockholm
Chapter 14 Clamping Elements
Chapter 15 Disc Brakes
Chapter 16 Bearings Vejle
Helsingborg
Chapter 17 Vibrators
Head Office
Norway Sweden Denmark Finland

Lönne Scandinavia AS Lönne Scandinavia AB Lönne Scandinavia AS Lönne Scandinavia OY
Liamyrane 12 Kastellgatan 5 Bugattivej 5G Hernepellontie 11
N-5132 Nyborg Bergen S-254 66 Helsingborg DK-7100 Vejle FI-00710 Helsinki
Tel: +47 55 39 10 00 Tel: +46 (0) 42 38 03 00 Tel: +45 76 40 87 00 Tel: +358 (0) 9 342 4300
Fax: +47 55 39 11 00 Fax: +46 (0) 42 38 03 09 Fax: +45 76 40 87 01 Fax: +358 (0) 9 3424 3099
Local mail: info.norway@lonne.com Local mail: info.sweden@lonne.com Local mail: info.denmark@lonne.com Local mail: info.finland@lonne.com
24-h. service: +47 918 33 073 24-h. service: +46 (0) 70 885 5431 24-h. service: +45 (0) 24 45 74 03
info.international@lonne.com
www.lonne.com
Revision 0 09 2010 HH

1 Motor 2 e

Uploaded by

Copyright:

Available Formats

1 Motor 2 e

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1 Motor 2 e

Uploaded by

Copyright:

Available Formats

Products | Solutions | Service

Electric Motors Chapter 1

Type 2.2: Test report

Type 3.1: Inspection certificate

Type 3.2: Inspection certificate

New ecodesign requirements for electric motors 4

New Ecodesign Requirements for Electric Motors

New standard classes for efficiencie

IE1 to IE3 efficiences 4- pole 50 Hz New Efficiency Classes

New measuring method according to IEC 60034-2-1:2007

Previosly: PLL = 0,5% ofP added

EFF measuring method Losses determined Losses determined

Globally applicable standards and legal requirements

kW kW 50Hz 60Hz Nm 50Hz 60Hz class. 100%load 75%load cos φ

Type Output RPM Torque. Amp. Eff. Efficiency ? [%] Kg

Type Output RPM Torque. Amp. Eff. Efficiency ? [%] Kg

Additional data for 60Hz on request.

a) Increased rated output.

a) Increased rated output.

a) Increased rated output.

a) Increased rated output.

2/4- Pole Motors (2- speed)

400 Other voltages on request.

4/6- Pole Motors (2- speed)

Fan / pump duty Constant torque

400 Other voltages on request.

4/8- Pole Motors (2- speed)

Fan / pump duty Constant torque

Lönne electric motors

Tolerances for electrical data

Minimum absolute value: 0.02

CSA C22.2.No 100 Canada

Dimensions Shaft/ Flanges

Notes on the dimension

ISO fit acc. to DIN ISO 286-2 Dimension Permitted devitation

D, DA <30mm j6 A, B <250 ±0,75

All dimensions stated are in mm

Illustration, dimensions Shaft/ Flanges

Shaft extension Diameter Thread

Dimensions and tolerances for

Overall Dimensions Illustration 7AA, 7BA, 14BG

Overall Dimensions 7AA, 7BA, 14BG

63 7AA 63 100 27 120 118 80 96 40 63 7 164 101 6 9 170 - M16/ M25

Overall Dimensions Illustration 9AA, 1TZ9, 16BG

Overall Dimensions 9AA, 1TZ9, 16BG

These dimensions are considered as basic in accordance with IEC 72

Single phase motors, Fan Pump Drive

Single phase motors, Constant Torque

High start torque

Type 7JE A AA AB AC AD1 AD2 B BB C H HA HD HF K KA L LD LG W D E F G GD

EN 50347 EN 60034-6 EN 60034-11 IEC 60038

On occations of ordering mounting forms

Spare part Illustration

Terminal Marking/ Connections

Operation Values for spring- operated brakes with standard excitation.

71 2LM8 005-2NA10 5 AC 230 / DC205 0.11 20 25 56 77 0.000013 51

90 2LM8 020-4NA10 20 AC 230 / DC205 0.17 32 37 90 75 0.00016 75

112 2LM8 060-6NA10 60 AC 230 / DC205 0.28 53 60 210 77 0.00063 87

Design of the 2LM8 Spring- operated disk brake