K3020P, K3020PG Series

www.vishay.com
Vishay Semiconductors
Optocoupler, Phototriac Output, Non-Zero Crossing, 400 VDRM
FEATURES
• 400 V blocking voltage
• Wide range of trigger current
A 1 6 MT2 • 100 mARMS on-state current
• Wide temperature range -55 °C to +100 °C
C 2 5 NC
• Material categorization:
for definitions of compliance please see
NC 3 4 MT1
www.vishay.com/doc?99912

APPLICATIONS
• Power TRIAC driver
• Isolated AC load switch
• Air condition
• Heaters
DESCRIPTION • White goods
The K3020P, K3020PG series consists of a phototriac • Industrial controls
optically coupled to a gallium arsenide infrared-emitting • Office equipment
diode in a 6-lead plastic dual inline package.
The non-zero crossing functionality enables full wave AGENCY APPROVALS
control. Featuring galvanic and electrical noise isolation, the • UL
output is able to directly switch AC loads or drive medium to
high power TRIACs. • cUL
• DIN EN 60747-5-5 (VDE 0884-5)
• CQC: GB4943-1-2011
• CQC: GB8898-2011
• FIMKO

ORDERING INFORMATION

DIP-6 G leadform
K 3 0 2 X P G

PART NUMBER TRIGGER PACKAGE 10.16 mm

7.62 mm
CURRENT BIN OPTION

AGENCY CERTIFIED / PACKAGE TRIGGER CURRENT, IFT

VDE, cUL, BSI 5 mA 10 mA 15 mA 30 mA
DIP-6 K3023P K3022P K3021P K3020P
DIP-6, 400 mil K3023PG K3022PG K3021PG K3020PG
Note
• Additional options may be possible, please contact sales office.

Rev. 2.5, 27-Jul-2021 1 Document Number: 83505

For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 K3020P, K3020PG Series
www.vishay.com
Vishay Semiconductors

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage VR 5 V
Forward current IF 80 mA
Surge current P.W. < 10 μs IFSM 3 A
Power dissipation Pdiss 100 mW
Junction temperature Tj 125 °C
OUTPUT
Peak off-state voltage VDRM 400 V
On-state RMS current ID(RMS) 100 mA
Peak surge current tp ≤ 10 ms IFSM 1.5 A
Power dissipation Pdiss 300 mW
Junction temperature Tj 125 °C
COUPLER
Total power dissipation Ptot 350 mW
Storage temperature range Tstg -55 to +150 °C
Ambient temperature Tamb -55 to +100 °C
Lead soldering temperature 2 mm from case, t < 10 s Tsld 260 °C
Note
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = 50 mA VF - 1.3 1.6 V
Reverse voltage IR = 10 μA VR 5 - - V
Junction capacitance VR = 0 V, f = 1 MHz Cj - 50 - pF
OUTPUT
Forward peak off-state voltage
IDRM = 100 nA VDRM (1) 400 - - V
(repetitive)
Peak on-state voltage ITM = 100 mA VTM - 1.5 3 V
Critical rate of rise of off-state
IF = 0 A, VD = 0.67 VDRM dV/dtcr - 10 - V/μs
voltage
Critical rate of rise of on-state
VD = 30 VRMS, ID = 15 mARMS dV/dtcrq 0.1 0.15 - V/μs
current commutation
COUPLER (2)
K3020P IFT - 15 30 mA
K3020PG IFT - 15 30 mA
K3021P IFT - 8 15 mA
K3021PG IFT - 8 15 mA
Emitting diode trigger current VS = 3 V, RL = 150 Ω
K3022P IFT - 5 10 mA
K3022PG IFT - 5 10 mA
K3023P IFT - 3 5 mA
K3023PG IFT - 3 5 mA
Holding current IF = 10 mA, VS ≥ 3 V IH - 200 - μA
Notes
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
(1) Test voltage must be applied within dV/dt ratings.
(2) I is defined as a minimum trigger current.
FT

Rev. 2.5, 27-Jul-2021 2 Document Number: 83505

For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 K3020P, K3020PG Series
www.vishay.com
Vishay Semiconductors

SAFETY AND INSULATION RATINGS

PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Climatic classification According to IEC 68 part 1 55 / 100 / 21
Pollution degree According to DIN VDE 0109 2
Comparative tracking index Insulation group IIIa CTI 175
Maximum rated withstanding isolation voltage According to UL1577, t = 1 min VISO 4420 VRMS
Tested withstanding isolation voltage According to UL1577, t = 1 s VISO 5300 VRMS
Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 8000 Vpeak
Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 Vpeak
VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω
Isolation resistance
VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω
Output safety power PSO 265 mW
Input safety current ISI 130 mA
Input safety temperature TS 150 °C
Creepage distance ≥7 mm
DIP-6
Clearance distance ≥7 mm
Creepage distance ≥8 mm
DIP-6, 400 mil
Clearance distance ≥8 mm
Insulation thickness DTI ≥ 0.4 mm
VIORM x 1.6 = VPR, 100 % sample test
Input to output test voltage, method A VPR 1424 Vpeak
with tM = 10 s, partial discharge < 5 pC
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.

TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

Axis Title
400 10000 1000
Total
IF - Forward Current (mA)
Pdiss - Power Dissipation (mW)

Output
300 100
1000
2nd line
1st line
2nd line

10
200

Input 100 1
100

0.1
0 0.4 0.8 1.2 1.6 2.0
0 10
-60 -40 -20 0 20 40 60 80 100 120 VF - Forward Voltage (V)
Tamb - Ambient Temperature (°C)

Fig. 1 - Total Power Dissipation vs. Ambient Temperature Fig. 2 - Forward Current vs. Forward Voltage

Rev. 2.5, 27-Jul-2021 3 Document Number: 83505

For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 K3020P, K3020PG Series
www.vishay.com
Vishay Semiconductors
I FTrel - Relative Threshold Forward Current

1.5 100
1.4
VS = 3 V

I DRM - Off-State Current (nA)

1.3 R L = 150 :
1.2 V DR = 100 V
IF = 0
1.1
1.0 10
0.9
0.8
0.7
0.6
0.5 1
-30 -20 -10 0 10 20 30 40 50 60 70 80 20 30 40 50 60 70 80 90 100
Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C)

Fig. 3 - Relative Threshold Forward Current vs. Fig. 5 - Off-State Current vs. Ambient Temperature
Ambient Temperature

1.5 250
VTMrel - Relative On-State Voltage

1.4 200

I TM - On-State Current (mA)

1.3 IF = I FT 150
I T = 100 mA I FT = 15 mA
1.2 100
1.1 50
1.0 0
0.9 - 50
0.8 - 100
0.7 - 150
0.6 - 200
0.5 - 250
-30 -20 -10 0 10 20 30 40 50 60 70 80 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 2.5
Tamb - Ambient Temperature (°C) V TM - On-State Voltage (V)

Fig. 4 - Relative On-State vs. Ambient Temperature Fig. 6 - On-State Current vs. On-State Voltage

Rev. 2.5, 27-Jul-2021 4 Document Number: 83505

For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 K3020P, K3020PG Series
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS (in millimeters)
DIP-6
9.00 max.
7.62 typ.
8.60 ± 0.10
6.50 ± 0.25
0.90 min.

3.55 ± 0.25

3.10 ± 0.50
0.79 min.
0.85 ± 0.10

0.50 ± 0.10
3° to 9° 0.25 ± 0.10
2.54 typ. 1.27 ± 0.10

6 5 4

Pin one I.D.

1 2 3

DIP-6, 400 mil

10.16 typ.
9.00 max.
7.62 typ.
8.60 ± 0.10
6.50 ± 0.25
0.90 min.
0.10 min.
3.55 ± 0.25
3.05 ± 0.50

0.85 ± 0.10

0.50 ± 0.10 0.25 ± 0.10

10.55 ± 0.40
2.54 typ. 1.27 ± 0.10

6 5 4

Pin one I.D.

1 2 3

Rev. 2.5, 27-Jul-2021 5 Document Number: 83505

For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 K3020P, K3020PG Series
www.vishay.com
Vishay Semiconductors
PACKAGE MARKING
K3020P

V YWW H 68

Fig. 7 - Example of K3020P

Notes
• The “G” of the G leadform type is not marked on the body.
• The VDE logo is only marked on ption1 parts.

PACKAGING INFORMATION (in millimeters)

DIP-6
528 ± 0.2
330 ± 0.5
260 ± 0.5
200 ± 0.5
150 ± 0.5

125 ± 0.5

– 1.0
30 ± 0.5 B
VISHAY OPTOSEMICONDUCTOR MADE IN MALAYSIA ANTISTATIC

Detail B Detail A A
– 1.0

– 1.0

3 ± 0.5 – 1.0
380 ± 1
0.7 ± 0.5 1.0 14 x

12 ± 0.3 13 x 10 = 130
B

6.6 ± 0.3 Transparent rigid PVC

6° 2.7 ± 0.2
1
0.

4.4 ± 0.3
R

11 ± 0.3
5
0.

0.6 ± 0.1
R

10°
A Detail A Detail B
// 0.2 B 5.7 ± 0.15
17996
Section A - B Not to scale

Rev. 2.5, 27-Jul-2021 6 Document Number: 83505

For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 K3020P, K3020PG Series
www.vishay.com
Vishay Semiconductors
DIP-6, 400 mil
9

5.7
13.6
0.5

With stopper pins

4.3
tolerance: ± 0.5
15912
15.3 length: 575 ± 5

SHIPPING INFORMATION HANDLING AND STORAGE CONDITIONS

ESD level: HBM class 2
DEVICES PER TUBS
TYPE UNITS/TUBE TUBES/BOX UNITS/BOX
Floor life: unlimited
DIP-6 50 40 2000 Conditions: Tamb < 30 °C, RH < 85 %
Moisture sensitivity level 1, according to J-STD-020
SOLDER PROFILES
Axis Title
300 10000
5s
Lead temperature
250
235 °C to
260 °C Second Full line: typical
wave
First wave Dotted lines:
Temperature (°C)

200 process limits 1000

2nd line
2nd line

ca. 2 K/s
1st line

ca. 200 K/s

150
100 °C to
130 °C
100 100
2 K/s ca. 5 K/s
50 Forced cooling

0 10
0 50 100 150 200 250
948626 Time (s)

Fig. 8 - Wave Soldering Double Wave Profile According to

J-STD-020 for DIP Devices

Rev. 2.5, 27-Jul-2021 7 Document Number: 83505

For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Revision: 09-Jul-2021 1 Document Number: 91000