Professional Documents
Culture Documents
European Steel and Alloy Grades
European Steel and Alloy Grades
YOU HERE: Steel numbers -> Number 1.04XX OR Steel and cast iron standards -> / EN 10025-3 / EN 10113-
2
S275N ( 1.0490 )
Grade : S275N
Number: 1.0490
EN 10025 - 3 : 2004 Technical delivery conditions for normalized/normalized rolled weldable fine
grain structural steels
Standard:
EN 10113 - 2 : 1993 Hot-rolled products in weldable fine grain structural steels. Delivery conditions
for normalized/normalized rolled steels
C Si Mn Ni P S Cr Mo V N Nb Ti Al Cu CEV
max max 0.5 - max max max max max max max max max max max max
0.18 0.4 1.5 0.3 0.03 0.025 0.3 0.1 0.05 0.015 0.05 0.05 0.02 0.55 0.42
M e c ha nic a l pr ope r t ie s of gr a de S 2 7 5 N ( 1 .0 4 9 0 )
Rm - Tensile strength (MPa) Flat and long products 370-510 350-480 350-480
Nominal thickness (mm): to 16 16 - 40 40 - 63 63 - 80 80 - 100 100 - 150 150 - 200 200 - 250
ReH - Minimum yield strength (MPa) 275 265 255 245 235 225 215 205
file:///E:/BOOKS/Materials%20Selection/EU%20STEELS/REZA%203/www.steelnumber.com/en/steel_composition_euc16e.html?name_id=16 1/2
3/6/2014 S275N / 1.0490 - steel equivalent, mechanical properties, chemical composition
A - Min. elongation Lo = 5,65 √ So (%) 24 24 24 23 23 23
Equiva le nt gr a de s of gr a de S 2 7 5 N ( 1 .0 4 9 0 )
Warning! Only for reference
USA Germany Japan England European old Italy
- DIN,WNr JIS BS EN UNI
A572Gr.42 1.0486 SM400B 43DD FeE275KGN FeE275KGN
A633A StE285
M e c ha nic a l pr ope r t ie s
M e c ha nis c he Eige ns c ha f t e n
Ca r a c t e r is t ique s m e c a nique s
R eH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
R m Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc
He a t t r e a t m e nt c ondit ions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated
Chemical composition of S275N (1.0490). Equivalent grades of S275N (1.0490). Standards of S275N (1.0490).
Properties of S275N (1.0490). Hardness of S275N (1.0490). Strength of S275N (1.0490). Elongation of S275N (1.0490).
© 2011- 2013 All rights reserved. The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user
file:///E:/BOOKS/Materials%20Selection/EU%20STEELS/REZA%203/www.steelnumber.com/en/steel_composition_euc16e.html?name_id=16 2/2