Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    Product Data Sheet OK 61.30: E 'Manual Metal-Arc Welding'

    Uploaded by

    Bayu Rahman
    This product data sheet provides information on an extra low carbon stainless steel electrode for welding steels of the 19 Cr 10 Ni-type. The electrode is suitable for welding stabilized stainless steels of similar composition, except when the full creep resistance of the base material is required. Key specifications of the electrode include an AC open circuit voltage range of 50V, an austenitic chromium-nickel alloy type, and a ferrite content classification of FN 3-10. Mechanical properties of the weld metal include a minimum yield strength of 320 MPa, maximum tensile strength of 700 MPa, and minimum Charpy V impact values of 47J at 20°C and 32J at -

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Product Data Sheet OK 61.30: E 'Manual Metal-Arc Welding'

    Uploaded by

    Bayu Rahman
    65 views2 pages
    This product data sheet provides information on an extra low carbon stainless steel electrode for welding steels of the 19 Cr 10 Ni-type. The electrode is suitable for welding stabilized stainless steels of similar composition, except when the full creep resistance of the base material is required. Key specifications of the electrode include an AC open circuit voltage range of 50V, an austenitic chromium-nickel alloy type, and a ferrite content classification of FN 3-10. Mechanical properties of the weld metal include a minimum yield strength of 320 MPa, maximum tensile strength of 700 MPa, and minimum Charpy V impact values of 47J at 20°C and 32J at -

    Original Description:

    Kawat las stainless

    Original Title

    OK 61.30 (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This product data sheet provides information on an extra low carbon stainless steel electrode for welding steels of the 19 Cr 10 Ni-type. The electrode is suitable for welding stabilized stainless steels of similar composition, except when the full creep resistance of the base material is required. Key specifications of the electrode include an AC open circuit voltage range of 50V, an austenitic chromium-nickel alloy type, and a ferrite content classification of FN 3-10. Mechanical properties of the weld metal include a minimum yield strength of 320 MPa, maximum tensile strength of 700 MPa, and minimum Charpy V impact values of 47J at 20°C and 32J at -

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    65 views2 pages

    Product Data Sheet OK 61.30: E 'Manual Metal-Arc Welding'

    Uploaded by

    Bayu Rahman
    This product data sheet provides information on an extra low carbon stainless steel electrode for welding steels of the 19 Cr 10 Ni-type. The electrode is suitable for welding stabilized stainless steels of similar composition, except when the full creep resistance of the base material is required. Key specifications of the electrode include an AC open circuit voltage range of 50V, an austenitic chromium-nickel alloy type, and a ferrite content classification of FN 3-10. Mechanical properties of the weld metal include a minimum yield strength of 320 MPa, maximum tensile strength of 700 MPa, and minimum Charpy V impact values of 47J at 20°C and 32J at -

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Product Data Sheet OK 61.

    30
    E 'Manual metal-arc welding'

    Prepared by Qualified by Approved by Reg no Cancelling Reg date Page

    A-C Thorsson Tero Borg Tapio Huhtala EN007233 EN007127 2016-05-12 1 (2)

    REASON FOR ISSUE


    Approvals revised.

    GENERAL
    Extra low carbon stainless steel electrode for welding steels of the 19 Cr 10 Ni-type.
    Also suitable for welding stabilized stainless steels of similar composition, except when the full creep
    resistance of the base material is to be met.

    Min AC OCV: 50 Alloy Type: Austenitic CrNi


    Polarity: DC+, AC Coating Type: Acid Rutile
    Ferrite Content: FN 3-10

    WELDING POSITIONS

    1 2 3 4 6

    CLASSIFICATIONS Electrode APPROVALS


    EN ISO 3581-A E 19 9 L R 1 2 ABS Stainless
    SFA/AWS A5.4 E308L-17 CE EN 13479
    CSA W48 E308L-17 CWB CSA W48: E308L-17
    Werkstoffnummer 1.4316 DB 30.039.02
    DNV-GL VL 308 L
    NAKS/HAKC 2.0-4.0 mm
    Seproz UNA 272580
    VdTÜV 00792
    APPROVAL COMMENT
    Approvals valid for lot numbers starting with SB.

    CHEMICAL COMPOSITION
    All Weld Metal (%)
    Min Max Nom
    C 0.030
    Si 0.50 1.00
    Mn 0.50 1.20
    P 0.025
    S 0.020
    Cr 18.5 20.5
    Ni 9.0 11.0
    Mo 0.5
    Cu 0.5
    N 0.15
    Ferrite FN 5
    Product Data Sheet OK 61.30
    E 'Manual metal-arc welding'

    Prepared by Qualified by Approved by Reg no Cancelling Reg date Page

    A-C Thorsson Tero Borg Tapio Huhtala EN007233 EN007127 2016-05-12 2 (2)

    MECHANICAL PROPERTIES OF WELD METAL

    ISO AWS

    As welded As welded
    Properties Min Max Typ Min Max
    Rp0.2 (MPa) 320 430 320
    Rm (MPa) 520 700 580 520 700
    A4 (%) 35
    A5 (%) 33 45
    Z (%) 60

    Charpy V at 20°C (J) 47 70


    Charpy V at -60°C (J) 32 49

    Comments:
    Interpass temp. at welding <150 °C.

    ECONOMICS & CURRENT DATA


    Dimension (mm) Current (A)
    -
    W η N B H T U Welding
    -
    Ø x Length Min Max Positions
    1.6 x 300 35 45 0.7 105 0.55 240 0.6 24 27 1,2,3,4,6
    2.0 x 300 35 65 1.2 105 0.55 160 0.8 29 29 1,2,3,4,6
    2.5 x 300 50 90 1.8 105 0.55 99 1.1 36 31 1,2,3,4,6
    3.2 x 350 70 130 3.9 105 0.60 49 1.4 54 31 1,2,3,4,6
    4.0 x 350 90 180 5.2 105 0.60 33 2.0 60 32 1,2,3,4,6
    5.0 x 350 140 250 8.0 105 0.60 20 3.0 60 33 1,2,3
    W = Weight (kg / 100 electrodes)
    η = Efficiency (g weld metal x 100 / g core wire)
    N = Effective value (kg weld metal / kg electrodes)
    B = Changes (number of electrodes / kg weld metal)
    H = Deposit rate at 90% of max current (kg weld metal / hour arc time)
    T = Fusion time at 90% of max current (s / electrode)
    U = Arc voltage (V)

    OTHER DATA
    Hardness data:
    As welded condition, all weld metal, transverse cross section of ISO joint, measurements done along a
    horizontal- (5 indents) and vertical line (10 indents), 2 samples tested: 174 - 237 HV10, average 204 HV10

    Redrying: 350 °C, 2h.

    You might also like