Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 725 views

    f573 Okuma Ma 600 HB Space Center Technical Details

    Uploaded by

    Jordan Martinez Liz
    This listing is for a used OKUMA MA-600 HB horizontal machining center from 2006 with an OSP-P200M CNC control. It has a 1000mm x-axis travel, 900mm y-axis travel, 1000mm z-axis travel, and a 12,000rpm maximum spindle speed. Additional options include a larger coolant tank, temperature compensation controls, tool presetter, rotary table, automatic tool measurement, and DNC capabilities.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    f573 Okuma Ma 600 HB Space Center Technical Details

    Uploaded by

    Jordan Martinez Liz
    725 views4 pages
    This listing is for a used OKUMA MA-600 HB horizontal machining center from 2006 with an OSP-P200M CNC control. It has a 1000mm x-axis travel, 900mm y-axis travel, 1000mm z-axis travel, and a 12,000rpm maximum spindle speed. Additional options include a larger coolant tank, temperature compensation controls, tool presetter, rotary table, automatic tool measurement, and DNC capabilities.

    Original Title

    109107 f573 Okuma Ma 600 Hb Space Center Technical Details

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This listing is for a used OKUMA MA-600 HB horizontal machining center from 2006 with an OSP-P200M CNC control. It has a 1000mm x-axis travel, 900mm y-axis travel, 1000mm z-axis travel, and a 12,000rpm maximum spindle speed. Additional options include a larger coolant tank, temperature compensation controls, tool presetter, rotary table, automatic tool measurement, and DNC capabilities.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    725 views4 pages

    f573 Okuma Ma 600 HB Space Center Technical Details

    Uploaded by

    Jordan Martinez Liz
    This listing is for a used OKUMA MA-600 HB horizontal machining center from 2006 with an OSP-P200M CNC control. It has a 1000mm x-axis travel, 900mm y-axis travel, 1000mm z-axis travel, and a 12,000rpm maximum spindle speed. Additional options include a larger coolant tank, temperature compensation controls, tool presetter, rotary table, automatic tool measurement, and DNC capabilities.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Used, Horizontal Machining Centre

    Manufacturer: OKUMA
    Modell: MA-600 HB 'Space Center'
    Serial Number: 126926
    New: 10-2006
    CNC Control: Okuma OSP-P200M

    Technical specifications:

    Capacity
    Maximum workpiece diameter 1000 mm
    Maximum workpiece height 1000 mm
    X-axis travel (column right and left) 1000 mm
    Y-axis travel (spindle up and down) 900 mm
    Z-axis travel (table back and forth) 1000 mm
    Distance spindle end to pallet center minimum 70 mm
    Distance spindle end to pallet center maximum 1070 mm
    Distance spindle center to pallet top minimum 50 mm
    Distance spindle center to pallet top maximum 950 mm

    Spindle
    Spindle taper hole ISO-50
    Spindle speed minimum 50 min-1
    Spindle speed maximum 12000 min-1
    Spindle speed shifts variable
    Main motor (30 minute rating) 37 kW
    Main motor (contineous rating) 26 kW
    Spindle torque maximum 284 Nm

    Feed Rates
    Rapid traverse 60 m/min
    Maximum rapid traverse acceleration 0,7 G
    Maximum cutting feed rate 1 - 60.000 mm/min
    Feed shaft motor (X) 6,7 kW
    Feed shaft motors (Y) 2x 6,0 kW
    Feed shaft motors (Z) 6,7 kW
    Used, Horizontal Machining Centre

    Manufacturer: OKUMA
    Modell: MA-600 HB 'Space Center'

    Accuracy
    Positioning accuracy (X,Y,Z) ± 0,004 mm/ full stroke
    Repeating accuracy (X,Y,Z) ± 0,0015 mm

    Table and Pallet


    Pallet width 630 x 630 mm²
    Pallet load capacity (evenly distributed) 1130 kg
    NC Rotary table motor 2,8 kW
    Rotary Table speed 21,5 Rpm
    Table index minimum increemnt 0,001 °
    Pallet top face T-Slot
    Pallet top: hole diameter mm
    Pallet top: hole pitch mm
    Pallet top: number of holes
    Pallet change time 12 sec
    Table index 0,001 °
    Table index time / 90° / 180° 2 / 3 sec
    Height from floor top to top pallet top mm

    ATC Tool Magazine


    No.of tool pockets (standard) 40
    Tool shrank ISO - 50
    Pull stud type MAS 2
    Maximum tool diameter (with adjacent tool) 140 mm
    Maximum tool diameter (without adjacent tool) 240 mm
    Maximum tool length from taper reference plane 450 mm
    Maximum tool weight including tool holder and pull stud 25 kg
    Chip to chip time (tool weight less than 6 kg) 2 sec
    Chip to chip time MAS Standard (tool weight 6-12 kg) 4,4 sec

    Power
    Power capacity (30 minutes rating) kVA
    Power capacity (continuous rating) kVA
    Used, Horizontal Machining Centre

    Manufacturer: OKUMA
    Modell: MA-600 HB 'Space Center'

    Air Source
    Pressure bar
    Capacity (standard) l/min

    Machine Dimensions
    Width 3380 mm
    Length 6495 mm
    Height from top floor 3280 mm
    Machine weight (standard) 26000 kg

    Options on this Machine 12.000 min-1 Spindle, including larger coolant tank,
    incl TAS-S Thermo Active Stabilezer-Spindle
    Temprature correction by control, extra
    oilcooler for spindle to keep accuracy within
    0,006 mm for X-/Y-and Z axis with varying
    spindle speeds, extra interesting by 3-D
    Products, 50-12000 RPM spindel 37/22 kW
    TAS-C Thermo Active Stabilzer-Construction
    Temprature correction by control
    Absoscale Okuma absoscale linear scales on X-/Y-
    and Z-axis
    Toolcharger converting to Din Tooling
    NCRT Table, Full B axis control (4th Axis) with
    indexing 0,001°, interpolation and feed
    motor 2,8 kW, 21,5 min-1
    2 palletchange from tapered to T -slots pallets
    Coolant options, inclease of flood to 20 l/min, in case
    of 12 l/min, at 15 bar
    Coolwater shower with additional pump
    Coolant gun for workpiece cleaning with
    additional pump
    Automatic chip conveyor belt type, ejection height
    1260 mm
    Mayfran consep 2000 coolwater cleaning system
    Automatic toollength measuring and toolbreak control
    Prepared for automatic measurement function
    Used, Horizontal Machining Centre

    Manufacturer: OKUMA
    Modell: MA-600 HB 'Space Center'

    Options on this Machine OMI from Renishaw mounted on machine


    Visieport for operatordoor
    Extra on OSP P200-M CNC control with standard
    3D-E Kit
    3D-D Kit Programmable messages
    200 pieces workpiece coordinates
    300 tool length- and diameter compensations
    G 62 Programmable mirror function
    G 50 / G 51 enlarge and reduce
    Semi Automatic measure function
    Sequence program restart from stop point
    Controll options:
    Super Nurbs, type A finction 4 axis
    Automatic chamfering and rounding from
    random corners
    DNC-DT500 till 500 Mb, including T1 function

    You might also like