Ramaiah: MSEE02
Ramaiah: MSEE02
Ramaiah: MSEE02
USN 1 M S
RAMAIAH
Institute of Technology
(Autonomous Institute, Affiliated to VTU)
(Approved by AICTE, New Delhi & Govt. of Karnataka) Accredited by NBA & NAAC with ‘A’ Grade
UNIT- I
1. a) Explain the atomic bonding mechanisms with examples. CO1 (12)
b) Explain the important properties of polymers, metals and ceramic CO1 (08)
materials.
UNIT- II
3. a) With flow chart briefly explain powder metallurgy process. CO2 (10)
b) What are the different methods of production of powders and explain CO2 (05)
any one process with a neat sketch.
c) Write a note on applications of powder metallurgy. CO2 (05)
4. a) List the advantages and limitations of powder metallurgy process. CO2 (10)
b) With a neat sketch explain Hot Isostatic compaction process. CO2 (05)
c) Discuss the characteristics of metal powders used in powder CO2 (05)
metallurgy.
UNIT- III
5. a) Suggest a method for producing tubular composites. Explain the same CO3 (10)
process with neat sketches.
b) With a neat sketch, describe pultrusion method to fabricate a CO3 (10)
composite part. What are its applications?
UNIT- IV
7. a) List the assumptions made in micromechanical analysis of a lamina. CO4 (04)
b) Obtain an expressions for i)longitudinal young’s modulus ii) Transverse CO4 (16)
Young’s modulus iii) Major poisson’s ratio iv) In- Plane shear modulus
by strength of material approach.
Page 1 of 2
MSEE02
8. a) Write the stiffness and compliance matrix for an isotropic, anisotropic CO4 (09)
and monoclinic.
b) Find the maximum value of S>0 If a stress of σx =2s, σy= -3s and CO4 (11)
xy =4s is applied to the 60 0 lamina of graphite/epoxy. Use Maximum
stress failure theory. Given the properties of a unidirectional
graphite/epoxy lamina as E1=181Gpa, E2=10.30Gpa, y12=0.28,
G12=7.17Gpa.
UNIT- V
9. a) Write a note on recent development of Titanium alloys. CO5 (10)
b) Briefly explain the inherent problems associated in machining of CO5 (04)
Ti alloys.
c) Explain the strengthening mechanism of Ti alloys. CO5 (06)
10. a) Explain chemical composition and properties of nickel chromium CO5 (10)
alloys. List the application of Nickel chromium alloys.
b) What are the basic requirements for high temperature materials. CO5 (10)
Explain the mechanism of strengthening and creep resistance of nickel
based super alloys.
****************
Page 2 of 2