The document provides a test summary report for a lithium-ion battery pack model AP18E8M. It lists the manufacturer and test laboratory information. It describes the cell/battery type and provides the results of 8 tests conducted according to UN38.3 including Altitude Simulation, Thermal Test, Vibration, Shock, External Short Circuit, Crush, Overcharge, and Forced Discharge. All tests were passed without issues according to the specified requirements.
The document provides a test summary report for a lithium-ion battery pack model AP18E8M. It lists the manufacturer and test laboratory information. It describes the cell/battery type and provides the results of 8 tests conducted according to UN38.3 including Altitude Simulation, Thermal Test, Vibration, Shock, External Short Circuit, Crush, Overcharge, and Forced Discharge. All tests were passed without issues according to the specified requirements.
The document provides a test summary report for a lithium-ion battery pack model AP18E8M. It lists the manufacturer and test laboratory information. It describes the cell/battery type and provides the results of 8 tests conducted according to UN38.3 including Altitude Simulation, Thermal Test, Vibration, Shock, External Short Circuit, Crush, Overcharge, and Forced Discharge. All tests were passed without issues according to the specified requirements.
The document provides a test summary report for a lithium-ion battery pack model AP18E8M. It lists the manufacturer and test laboratory information. It describes the cell/battery type and provides the results of 8 tests conducted according to UN38.3 including Altitude Simulation, Thermal Test, Vibration, Shock, External Short Circuit, Crush, Overcharge, and Forced Discharge. All tests were passed without issues according to the specified requirements.
3 Test Summary LG Energy Solution, LTD. Manufacturer’s contact information 188, Munji-ro, Yuseong-gu, Daejeon, Republic of Korea Telephone : +82-42-870-6195 E-mail : kkammy@lgensol.com Website : www.lgensol.com LG Energy Solution (Nanjing) Co., Ltd. NO.17-18 Hengyi Road, NO.26 Hengfei Road, Nanjing Economic & Technological Development Zone, Nanjing City, Test Laboratory information Jiangsu Province, China Telephone : +86-025-85603000-8231 E-mail : njliying@lgensol.com Website : www.lgensol.com Description List of Test Completed Cell/Battery Type Lithium Ion battery pack Revised edition Revision 6 Amendment 1 (Physical Description) (Pouch) Test Report Number QDI-190308-B-AP18E8M-C1 Test 1. Altitude Simulation Pass
Date of test report 2021.04.27 Test 2. Thermal Test Pass
Model name AP18E8M Test 3. Vibration Pass
Nominal voltage (V) 15.40 Test 4. Shock Pass
Capacity (mAh / Wh) 3574 / 55.03 Test 5. External Short Circuit Pass
Weight (g) 229.08 Test 6. Crush Pass
Dimensions (mm) 210.00 X 78.80 X 8.50 Test 7. Overcharge Pass
Reference to assembled battery testing Not applicable Test 8. Forced Discharge Pass requirements
Approved By: Ying Li
Team Leader Cyl NPI&CE lab part DQA Team LG Energy Solution(Nanjing) Co.,Ltd. E-mail: njliying@lgensol.com Document QDI-190308-B-AP18E8M-C1 Number
Prepared qianjunli
Approved Xuyuan
UN38.3 Test Report
- AP18E8M(15.40V, 3574mAh / 55.03Wh) -
Index 1. UN38.3 Test Condition 2. Test Result 3. Sample Image
2021. 04. 27 1. UN38.3 Test Condition Rev.6 Amendment 1
Test item Test Condition Requirements Etc.
Test 1. Altitude Simulation Storing at (low pressure)11.6kPa for 6hr at 20+/-5℃ T1~T5 : Sequence Tests
[72± 2℃,6hr ↔ -40± 2℃,6hr, interval max. 30min] x 10cycle
Test 2. Thermal Test Storing at 20± 5℃ for 24h
[7Hz↔200Hz↔7Hz, in 15min] x 12 times x 3 direction - After OCV (%) ≥ 90%
1) sinusoidal waveform with a logarithmic sweep - No leakage, no venting, no disassembly, Test 3. Vibration no rupture, no fire 2) 7Hz 18Hz (maintaining 1gn) app. 50Hz (until 8gn) 200Hz (maintaining 8gn), 1.6mm total excursion - Mass loss limit (leakage) 1) If M<1g, less than 0.5%, Half sine shock 2) If 1g≤M≤75g, less than 0.2%, 1) Peak acceleration 3) If M>75g, less than 0.1%) - For cells & single cell batteries : 150gn Test 4. Shock 𝟏𝟎𝟎𝟖𝟓𝟎 - For batteries (whichever is smaller) : 150gn or gn 𝑴𝒂𝒔𝒔(𝒌𝒈) 2) Pulse duration : 6msec 3) 6 direction (± x, y, z) x 3 cycle
1) Samples to be heated to 57± 4℃ in chamber (Measured on external case) - No disassembly, no rupture, no fire Test 5. External Short Circuit 2) Less than 0.1Ω, ext. short-circuit at 57± 4℃ within 6 hours after the test 3) 1hr continue after returning to 57± 4℃ - Max. Temp ≤ 170℃
for cylindrical cells
Test 6. Impact Φ=15.8± 0.1mm bar, 9.1± 0.1kg mass, 61± 2.5cm height (not less than 18mm diameter) - No disassembly, no fire within 6 hours after the test for cylindrical cells - Max. Temp ≤ 170℃ (less than 18mm diameter) Test 6. Crush Crushing rate :1.5cm/s, until 13kN± 0.78kN or 100mV drop or 50% deformation for prismatic, pouch, coin/button cells
Current = Manufacturer’s recommended max. continuous charge current X 2
Voltage 1.If charge voltage ≤ 18V, - No disassembly, no fire Only for Test 7. Overcharge V (min.) = 2 x (max. charge voltage) or 22V. within 7 days after the test Single Cell Battery / Battery 2.If charge voltage > 18V, V (min.) = 1.2 x (max. charge voltage)
Discharge at max. discharge current Resistance of Electric Loader
- No disassembly, no fire Test 8. Forced Discharge (connecting in series with 12V DC power supply), 1/Ω = (max. discharge current) within 7 days after the test Duration time = rated capacity/initial test current / (12 + Initial OCV) 2-1. T1-T4 Test Result Before Altitude (T1) Thermal (T2) Vibration (T3) Shock (T4)
After After Mass After After Mass After After Mass After After Mass NO. OCV Mass (g) Mass (g) Result Mass (g) Result Mass (g) Result Mass (g) Result OCV (V) OCV(%) Loss(%) OCV (V) OCV(%) Loss(%) OCV (V) OCV(%) Loss(%) OCV (V) OCV(%) Loss(%)
