SA-214/SA-214M Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger

and Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301

SA-216/SA-216M Specification for Steel Castings, Carbon, Suitable for Fusion Welding for
High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
SA-217/SA-217M Specification for Steel Castings, Martensitic Stainless and Alloy, for
Pressure-Containing Parts, Suitable for High-Temperature Service . . . . . 311
SA-225/SA-225M Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-
Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
SA-231/SA-231M Specification for Chromium-Vanadium Alloy Steel Spring Wire . . . . . . . . . . 323
SA-232/SA-232M Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire 329
SA-234/SA-234M Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for
Moderate and High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
SA-240/SA-240M Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet,
and Strip for Pressure Vessels and for General Applications . . . . . . . . . . . 345
SA-249/SA-249M Specification for Welded Austenitic Steel Boiler, Superheater,
Heat-Exchanger, and Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
SA-250/SA-250M Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and
Superheater Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371
SA-263 Specification for Stainless Chromium Steel-Clad Plate . . . . . . . . . . . . . . . . . . 377
SA-264 Specification for Stainless Chromium-Nickel Steel-Clad Plate . . . . . . . . . . . . 383
SA-265 Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate . . . . . . . . . . 389
SA-266/SA-266M Specification for Carbon Steel Forgings for Pressure Vessel Components . . 397
SA-268/SA-268M Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel
Tubing for General Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
SA-276 Specification for Stainless Steel Bars and Shapes . . . . . . . . . . . . . . . . . . . . . . 411
SA-278/SA-278M Specification for Gray Iron Castings for Pressure Containing Parts for Tem-
peratures up to 650°F (350°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423
SA-283/SA-283M Specification for Low and Intermediate Tensile Strength Carbon Steel Plates 429
SA-285/SA-285M Specification for Pressure Vessel Plates, Carbon Steel, Low- and
Intermediate-Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433
SA-299/SA-299M Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon . 437
SA-302/SA-302M Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum
and Manganese-Molybdenum-Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441
SA-307 Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength 445
SA-311/SA-311M Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to
Mechanical Property Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451
SA-312/SA-312M Specification for Seamless, Welded, and Heavily Cold Worked Austenitic
Stainless Steel Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457
SA-320/SA-320M Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469
SA-325 Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum
Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477
SA-333/SA-333M Specification for Seamless and Welded Steel Pipe for Low-Temperature Ser-
vice and Other Applications With Required Notch Toughness . . . . . . . . . 487
SA-334/SA-334M Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for
Low-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497
--`,``,``,,`,`,,````,`,``,,,`-`-`,,`,,`,`,,`---

SA-335/SA-335M Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
SA-336/SA-336M Specification for Alloy Steel Forgings for Pressure and High-Temperature
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521
SA-350/SA-350M Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch
Toughness Testing for Piping Components . . . . . . . . . . . . . . . . . . . . . . . . . 531
SA-351/SA-351M Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for
Pressure-Containing Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543
SA-352/SA-352M Specification for Steel Castings, Ferritic and Martensitic, for Pressure-
Containing Parts, Suitable for Low-Temperature Service . . . . . . . . . . . . . . 551

iv
Copyright ASME International (BPVC)
Provided by IHS under license with ASME Licensee=Khalda Petroleum/5986215001, User=Amer, Mohamed
No reproduction or networking permitted without license from IHS Not for Resale, 07/02/2019 13:32:26 MDT