Katalog 2012 en Qirox

QIROX®
217
QIROX®: The system for automated welding
and cutting.
QIROX® is the new CLOOS product brand QIROX Robots

comprising all solutions for automated More dynamic, quicker, more flexible
welding and cutting. Due to its modular – thanks to a new design and an
design, the QIROX® system allows additional 7th axis
scalable solutions which can perfectly
QIROX Positioners
match your production requirements.
Solutions for every component
The QIROX® system includes the
robot technology, software, sensors, QIROX Sensors
safety technology, positioners and the Safe detection with each weld seam
interface to the process technology. It
QIROX Software
is completed by an extensive range of
Management for professionals
options and complementary services. As
a result of this comprehensive service QIROX Compact systems
from just one supplier, our customers Efficient units for welding and cutting
can gain considerable economic and QIROX Special solutions
quality benefits. Customised systems for complex
requirements
www.qirox.de
218
219
Welding robots in the international top class
As one of the leading specialists in the development and manufacture of high-
value
welding robots for demanding industrial applications, CLOOS uses its decadesold
know-how for continuous development. Thanks to the integration of innovative
technologies, the new generation of QIROX® welding robots offers additional
customer value and production advantages. Among the particular highlights
are the complete reworking of the product design and the introduction of an
optional seventh axis. Both innovations contribute to a considerable increase in the
flexibility and dynamics of the QIROX® welding robots. As a result, the automated
welding processes can be configured in a significantly more efficient manner.
Advantages for increased productivity
Higher dynamics and weight reduction due to a leaner product design with
rounded ergonomic forms
Highest flexibility in the equipment by modular design of the robot mechanics
Optional seventh axis for increasing the working envelope and optimal
positioning of the welding torches
Less wear and improved, more user-friendly operation via optimised cables,
plugs and motor protection
Best processing quality due to a high repeatability
High offset speeds reduce the cycle times
The proven CLOOS quality ensures a particularly long service life and extended
maintenance intervals
Systems matched to production requirements, including suitable hardware and
software
220
Perfectly matched
CLOOS can supply you with all you need for optimised welding processes in your
production. All components have been proven a thousandfold in practice and are
perfectly matched to each other. This improves reliability, increases process speed
and minimises both the maintenance and the setup work. You will get just those
components which correspond to your production process requirements.
QIROX® Welding robot Classic (QRC) QIROX® Welding robot Hollow QIROX® Controller
shaft(QRH)
- Greatest flexibility due to an optional - Simple and fast touch-screen
seventh axis - Cable assemblies integrated in 6th programming
axis
- For floor or overhead mounting
- Wire drive unit integrated in the robot - All welding parameters can be
arm programmed at the controller
- For floor or overhead mounting - All welding processes are integrated
Process technology Positioners Special solution
- QINEO® welding power sources of - The most comprehensive program - Extra components for realisation of
the newest generation worldwide for robots and workpieces individual customer requests
- Interface for data exchange with the - Dynamic positioner for fast offset
robot controller movements
- Gas and water cooled welding - Synchronous movement of all axes
equipment for long duty cycle
- Copying of programs on
manipulators with identical
structure
Ergonomic
Protected
Integrative
Flexible
221
Many variants from one construction kit
The most dynamic feature of the QIROX® Robot is the modular design of all the
mechanics. All components of the welding robot – from the robot base to the
axis tube – are perfectly matched to each other. By using different components, a
customised welding robot can be generated for every production requirement.
3 capacity classes, 2 products lines,

2 installation options
QIROX® welding robots are available in three capacity classes: QIROX® 320, 350 and
410. Depending on your requirements, you can choose between either the classic
line QIROX® Classic (QRC) or the hollow shaft (QRH) model. The two product lines
are designed both for floor and for overhead mounting and can be combined with
different CLOOS sensors or changing systems. Thus optimum solutions for the
most diverse welding processes and production environments can be realised.
Shoulder joint
Arm tubes
QRC 320 Swivel arm
QRC 350
QRC 410
QRH 360
Angle foot
Wrist
1. QRC 15
2. QRH 15
7th axis
Robot base
222
Robot mechanics
Welding robots in the international top class generation of QIROX® welding robots offers additional
customer value and production advantages. Among
As one of the leading specialists in the development the particular highlights are the complete rework-
and manufacture of high-value ing of the product design and the introduction of an
optional seventh axis. Both innovations contribute to a
welding robots for demanding industrial applications, considerable increase in the flexibility and dynamics of
CLOOS uses its decadesold the QIROX® welding robots. As a result, the automated
welding processes can be configured in a significantly
know-how for continuous development. Thanks to more efficient manner.
the integration of innovative technologies, the new
223
224
Robot mechanics Classic wrist
The robot mechanics QRH320/350/410 is a six-axis Technical features

articulated arm robot. The robot is usually positioned
upright or overhead. The QRC320/350/410 is mounted
Less wear and improved, more user-friendly opera-
tion via optimised cables, plugs and motor protec-
on a base or directly at a robot positioner. The QRC ro-
tion
bot has a standard wrist where welding torches, flame
cutters and other working tools with a weight of up to
Higher dynamics and weight reduction due to a
leaner product design with rounded ergonomic
15/10 kg can be mounted. The integration of a chang-
forms
ing tool on the wrist allows to use more processes with
a robot. Applications:
Highest flexibility in the equipment by modular
design of the robot mechanics
- MIG/MAG welding
- Plasma and oxygen cutting
High offset speeds reduce the cycle times
- Plasma and plasma-powder welding
Digital AC drives
- Stud welding
Absolute path measuring system
Easy handling tasks
Options
Colour can be freely selected
Accessories
Technical data Robot QRC-320 Robot QRC-350 Robot QRC-410

Swivelling range axis 1 +170 / -170° +170 / -170° +170 / -170°
Swivelling speed axis 1 184 °/sec 184 °/sec 184 °/sec
Operating range Ø 4200 mm Ø 4470 mm Ø 500 mm
Operating range Axis 5 +90° Ø 3200 mm Ø 3440 mm Ø 4620 mm
Operating range height 2470 mm 2580 mm 2880 mm
Pay load 15.00 kg 15.00 kg 10.00 kg
Repeatability Δ ≤ s +/- 0,1 mm Δ ≤ s +/- 0,1 mm Δ ≤ s +/- 0,1 mm
Collision radius 500 mm 500 mm 500 mm
Floor space Ø 500 mm Ø 500 mm Ø 500 mm
Weight 235 kg 235 kg 240 kg
225
226
Robot mechanics wrist with hollow shaft
The robot mechanics QRH360/390 is a six-axis ar- Technical features

ticulated arm robot. The robot is usually positioned
upright or overhead. The QRH360/390 is mounted on
a base or directly at a robot positioner. The QRH robot
tion
has hollow-shaft wrist where the welding torch and
the torch cable assembly are integrated in the centre
point of axis 6. Applications:
forms
- MIG/MAG welding
Digital AC drives
Options
Cable assemblies integrated in 6th axis
Wire drive unit integrated in the robot arm
Accessories
Technical data Robot QRH-360 Robot QRH-390

Swivelling range axis 1 +170 / -170° +170 / -170°
Swivelling speed axis 1 184 °/sec 184 °/sec
Operating range Ø 4570 mm Ø 4900 mm
Operating range Axis 5 +90° Ø 3570 mm Ø 3900 mm
Operating range height 2680 mm 2860 mm
Pay load 15.00 kg 10.00 kg
Repeatability Δ ≤ s +/- 0,1 mm Δ ≤ s +/- 0,1 mm
Collision radius 500 mm 500 mm
Floor space Ø 500 mm Ø 500 mm
Weight 235 kg 240 kg
227
228
Robot mechanics Classic wrist with enlarged operating
range by 7th axis
The robot mechanics QRC320/350/410-E is a six-axis Technical features
articulated arm robot with an excenter axis 7 which is
integrated between robot base and centre point axis
1. The movements of all seven robot axes are synchro-
tion
nised by 100 %. The robot is usually positioned upright
or overhead. The QRC320/350/410-E is mounted on Higher dynamics and weight reduction due to a
a base or directly at a robot positioner. The QRC robot leaner product design with rounded ergonomic
has a standard wrist where welding torches, flame forms
cutters and other working tools with a weight of up to Highest flexibility in the equipment by modular
15/10 kg can be mounted. The integration of a chang- design of the robot mechanics
ing tool on the wrist allows to use more processes with Best processing quality due to a high repeatability
a robot. Applications: Digital AC drives
- MIG/MAG welding Working space extension by 7th axis
- Plasma and plasma-powder welding Options
Easy handling tasks
Accessories
Technical data Robot 7th axis QRC-350 Robot 7th axis QRC-350
Operating range Axis 5 +90° Ø4470 mm Ø5050 mm
229
230
Robot mechanics hollow shaft with enlarged operating
range by 7th axis
The robot mechanics QRC360/390-E is a six-axis articu- Technical features
lated arm robot with an excenter axis 7 which is inte-
grated between robot base and centre point axis 1. The tion via optimised cables, plugs and motor protec-
movements of all seven robot axes are synchronised tion
by 100 %. The QRH robot has hollow-shaft wrist where Higher dynamics and weight reduction due to a
the welding torch and the torch cable assembly are leaner product design with rounded ergonomic
integrated in the centre point of axis 6. Applications: forms
- MIG/MAG welding design of the robot mechanics
Digital AC drives
Working space extension by 7th axis
Options
Technical data Robot 7th axis QRC-360 Robot 7th axis QRC-390
Operating range Ø5680 mm Ø6030 mm
Operating range Axis 5 +90° Ø4620 mm Ø4960 mm
231
232
Robot mechanics Classic wrist, high robot base
The robot mechanics QRH320/350/410-H is a six-axis Technical features

articulated arm robot. The robot has a high base which
was particularly developed for floor mounting and is
used in upright position. The QRC320/350/410-H is
tion
mounted on the shop floor or a base frame and in up-
right position at a robot positioner. The QRC robot has
a standard wrist where welding torches, flame cutters
forms
and other working tools with a weight of up to 15/10
kg can be mounted. The integration of a changing tool
on the wrist allows to use more processes with a robot.
Applications:
Digital AC drives
- MIG/MAG welding
- Plasma and plasma-powder welding Options
Easy handling tasks
Accessories
Technical data Robot high base QRC-320 Robot high base QRC-350 Robot high base QRC-410
Operating range Ø 4200 mm Ø 4470 mm Ø 500 mm
Operating range Axis 5 +90° Ø 3200 mm Ø 3440 mm Ø 4620 mm
Operating range height 2790 mm 2900 mm 3200 mm
Pay load 15.00 kg 15.00 kg 10.00 kg
Repeatability Δ ≤ s +/- 0,1 mm Δ ≤ s +/- 0,1 mm Δ ≤ s +/- 0,1 mm
Collision radius 500 mm 500 mm 500 mm
Floor space Ø 500 mm Ø 500 mm Ø 500 mm
Weight 255 kg 255 kg 260 kg
233
234
Robot mechanics wrist with hollow shaft, high robot base
The robot mechanics QRH360/390-H is a six-axis artic- Technical features

ulated arm robot. The robot has a high base which was
particularly developed for floor mounting and is used
in upright position. The QRC360/390-H is mounted on
tion
the shop floor or a base frame and in upright position
at a robot positioner. The QRH robot has hollow-shaft
wrist where the welding torch and the torch cable
forms
assembly are integrated in the centre point of axis 6.
Applications:
- MIG/MAG welding
Digital AC drives
Options
Accessories
Technical data Robot high base QRH-360 Robot high base QRH-390
Operating range Axis 5 +90° Ø 3570 mm Ø 3900 mm
235
236
Robot Positioner
Advantages robot positioner: working envelope

Welding of complex workpieces
More flexibility due to increase of the robot working
envelope Change between several working stations
Welding of high-volume workpieces No down-times because of workpiece change

Versatile utilisation ratio due to increase of the robot
237
Base
The base places the robot in upright position. This Technical features
robot position enables a better accessibility to the
workpiece and allows welding of bigger workpieces.
Adjusting screws for a precise alignment during
mounting
The base is directly mounted on the floor or a floor-
mounted linear track.
Options
Adaptation of the robot mounting height
Consoles for drums and/or power sources, extrac-
tion
Technical data RP-S-5

Load 5.0 kN
Robot height 0.4-1.8 m
Grid robot height 0.10 m
238
C-frame
The C-shaped frame positions the robot overhead on a Technical features

fixed extension arm. This robot position enables a bet-
ter accessibility to the workpiece and allows welding
mounting
of bigger workpieces. The C-frame is directly mounted
on the floor or a floor-mounted linear track.
Opening in steel construction for a good accessibil-
ity during service works
Options
Reach adaptation
tion
Technical data RP-C-4 RP-C-6

Load 4.0 kN 6.0 kN
Robot height 2.4-3.6 m 2.4-3.6 m
Reach 1.2-2.2 m 1.2-2.2 m
Grid robot height 0.20 m 0.20 m
Grid reach 0.10 m 0.10 m
239
Rotating C-frame
The C-shaped frame with rotating extension arm posi- Technical features
tions the robot overhead. The rotating extension arm
increased the working range of the robot thus ena-
High repeatability (± 0.1 mm) because of spring-
pretensioned toothed wheel connections
bling to weld high-volume workpieces and/or serves
for the change between two working stations. The
rotating C-frame is directly mounted on the floor or a
floor-mounted linear track.
mounting
A fully synchronised robot axis
Options
Reach adaptation
Consoles for drums, power sources, extraction
Technical data RP-CT-200 RP-CT-250

Load 5.0 kN 5.0 kN
Robot height 2.8-4.8 m 2.8-4.8 m
Reach 1.2-2.0 m 2.0-3.0 m
Grid reach 0.40 m 0.25 m
Swivelling speed 70.0 °/sec 40.0 °/sec
Swivelling range +/- 185° +/- 185°
240
C-frame with vertical stroke
The C-shaped frame with mounted vertical stroke posi- Technical features
tions the robot overhead over the workpiece. The verti-
cal stroke increases the robot working range in height
thus allowing a deep entry into bigger workpieces. The
C-frame with vertical stroke is directly mounted on the
floor or a floor-mounted linear track.
mounting
Options
Increase of travelling length due to extension of the
linear track
Technical data RP-CV-5

Load 5.0 kN
Reach 0.4-1.2 m
Grid reach 0.10 m
Vertical stroke 0.70 m / 1.00 m / 1.50 m
Stroke speed 20.0 m/min
241
Rotating C-frame with vertical stroke
The C-shaped frame with rotating extension arm and Technical features
mounted vertical stroke positions the robot overhead.
The vertical stroke increases the robot working range
in height thus allowing a deep entry into high-volume
workpieces. The rotating extension arm additionally
Grease cartridge for guiding systems
increases the working range and/or serves for the sta-
tion change. The rotating C-frame with vertical stroke
is directly mounted on the floor or a floor-mounted
mounting
linear track.
Two fully synchronised robot axes
Options
Reach adaptation
Technical data RP-CTV-5

Load 5.0 kN
Reach 1.0-2.5 m
Grid reach 0.10 m
Vertical stroke 0.70 m / 1.00 m / 1.50 m
Swivelling speed 40.0 °/sec
Swivelling range +/- 185°
242
Vertical stroke for upright robot
The vertical stroke which is mounted on the floor or a Technical features

floor-mounted linear track extends the working range
of an upright mounted robot by one degree of free-
dom in order to weld big, complex workpieces.
Indexing of the 0 position for motor change
mounting
Technical data RP-VS-5

Load 5.0 kN
Vertical stroke 1.50 m
243
Rotating vertical stroke for upright robot
The vertical stroke which is mounted on the floor or a Technical features

floor-mounted linear track extends the working range
of an upright mounted robot by two degrees of free-
dom in order to weld big, complex workpieces.
mounting
Technical data RP-TVS-5

Load 5.0 kN
Vertical stroke 1.50 m
244
Vertical stroke for overhead robot mounting
At the vertical stroke a robot is mounted in overhead Technical features

position on an extension arm. Due to the vertical
stroke the robot gets an additional degree of freedom
for welding big workpieces. The vertical stroke is di-
rectly mounted on the floor or a floor-mounted linear
track.
mounting
Mounting components freely selectable and adapt-
able/to be integrated
Options
linear track
Technical data RP-VO-10 RP-VO-20

Load 10.0 kN 20.0 kN
Robot height 3.25-4.5 m 3.0-6.5 m
Vertical stroke 1.50 m / 2.00 m 1.50-5.00 m
Grid vertical stroke 0.00 m 0.50 m
Stroke speed 20.0 m/min 15.0 m/min
245
Rotating vertical stroke for overhead robot mounting
At the rotating vertical stroke a robot is mounted in Technical features

overhead position on an extension arm. Due to the
rotating vertical stroke the robot gets two additional
degrees of freedom for welding big workpieces. The
rotating vertical stroke is directly mounted on the floor
or a floor-mounted linear track.
mounting
Options
linear track
Technical data RP-TVO-20

Load 20.0 kN
Vertical stroke 1.50-5.00 m
Grid vertical stroke 0.50 m
246
Floor-mounted linear track
The floor-mounted linear track allows to mount the Technical features

robot in upright position on a base or in overhead
position on a frame. A carriage moves the robot in
horizontal direction. The floor-mounted linear track al-
lows to weld long workpieces, can be used for systems
Unlimited travelling lengths
with several stations and can be equipped with a sec-
mounting
ond carriage with robot. This makes it possible to weld
pairwise on one workpiece.
Options
linear track
tion
Additional carriage for second robot
Technical data RP-FL-10 RP-FL-20 RP-FL-35 RP-FL-50 RP-FL-120

Load 10.0 kN 20.0 kN 35.0 kN 50.0 kN 120.0 kN
Travelling length 2-25 m 2-25 m 3-25 m 3-30 m 3-30 m
Grid travelling length 1.00 m 1.00 m 1.00 m 1.00 m 1.00 m
Travelling speed 1.20 m/s 0.65 m/s 0.65 m/s 0.65 m/s 0.65 m/s
247
Overhead-mounted linear track
The top mounted track system, mounted on posts, Technical features

allows overhead mounting of robots. A carriage with
servo motor moves the robot in horizontal direction.
The overhead-mounted linear track allows to weld
long workpieces, can be used for systems with several
stations and can be equipped with a second carriage
with robot. This makes it possible to weld pairwise on
one workpiece.
Options
linear track
Additional carriage for second robot
Technical data RP-GL-10 RP-GL-20 RP-GL-35 RP-GL-50

Load 10.0 kN 20.0 kN 35.0 kN 50.0 kN
Travelling length 5-20 m 5-20 m 5-25 m 5-25 m
Grid travelling length 1.00 m 1.00 m 1.00 m 1.00 m
Travelling speed 1.80 m/s 1.80 m/s 0.65 m/s 0.65 m/s
248
Horizontal stroke for mounting on C-frame/overhead-
mounted linear track
The horizontal stroke is used on a top mounted track Technical features
or mounted on a vertical stroke and increases the hori-
zontal working range of the overhead mounted robot.
Options
linear track
Technical data RP-HL-5 (GL-20) RP-HL-10 (GL-35) RP-HL-10 (GL-50)

Load 5.0 kN 10.0 kN 10.0 kN
Travelling length 1.00 m / 1.50 m / 2.00 m 0.70 m / 1.00 m / 1.50 m / 2.00 m 2.00 m / 2.50 m / 3.00 m
Travelling speed 1.70 m/s 1.70 m/s 1.70 m/s
249
Vertical stroke for mounting on an overhead-mounted
linear track
The vertical stroke is used on a top mounted track, a Technical features
turnable C-frame or mounted on a horizontal stroke.
It increases the vertical working range of the overhead
mounted robot and allows welding of high-volume
workpieces.
Options
linear track
Technical data RP-VL-5 RP-VL-5-C

Load 5.0 kN 5.0 kN
Vertical stroke 1.00 m / 1.50 m / 2.00 m 0.70 m / 1.00 m / 1.50 m
Stroke speed 20.0 m/min 20.0 m/min
250
Transverse slide for overhead robot mounting
The transverse slide extends the working range of the Technical features
upright mounted robot by one degree of freedom in
order to weld complex, high-volume workpieces. The
lateral mounting of the transversal stroke enables a
deep entry of the robot into the workpiece. The trans-
verse slide is mounted to a vertical stroke.
Options
linear track
Technical data RP-CL-5

Load 5.0 kN
Travelling length 1.50 m / 2.00 m / 2.50 m
Travelling speed 1.70 m/s
251
252
Workpiece Positioner
Advantages robot positioner: Solution for each workpiece size

Turning, swivelling and tilting: always the optimum Mature combination of different movement devices
workpiece position Welding of complex contours without interruption
Optimum weld seam quality Improved accessibility of nearly all weld seams on
the workpiece
Positioners for loads between 2.5kN and 300kN
253
254
Workpiece Positioner with vertical rotation
The workpiece positioner has a vertically arranged Technical features

faceplate. The workpiece which is fixed on this face
plate can be turned into the optimum processing posi-
Faceplate with universal hole pattern for mounting
the workpiece fixture
tion by a horizontal turning axis.
Repeatability less than 0.1 mm
Service-friendly direct drives
mounting
Hollow-drilled shaft in the faceplate centre for me-
dia feed-through
Digital drive system
Options
Holding angle for mounting the workpiece fixtures
Rotary distributor for media supply
Non-stop rotation of the faceplate
Technical data WP-TV-2,5 WP-TV-5 WP-TV-10 WP-TV-20 WP-TV-30 WP-TV-50 WP-TV-100 WP-TV-150
Load 2.5 kN 5.0 kN 10.0 kN 20.0 kN 30.0 kN 50.0 kN 100.0 kN 150.0 kN
Free-turning radius 700-1300 700-1300 700-1000 700-1000 600-2000 700-1700 800-2200 900-2100
mm mm mm / 1000- mm / 1000- mm mm mm mm
1500 mm 1500 mm
Grid free-turning radius 100 mm 100 mm 100 mm / 100 mm / 200 mm 200 mm 200 mm 200 mm
250 mm 250 mm
Rotating speed 120.0 °/sec 120.0 °/sec 90.0 °/sec 60.0 °/sec 20.0 °/sec 8.0 °/sec 8.5 °/sec 6.5 °/sec
Turning range +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360°
255
256
Workpiece Positioner with vertical rotation and vertical
stroke
faceplate. The workpiece which is fixed on this face
plate can be turned into the optimum processing
Very high travelling speed
position by a horizontal turning axis. The integrated
vertical stroke facilitates loading and unloading of the
workpieces near to the floor and increases the free-
turning radius of the workpiece positioner thus allow-
ing to weld bigger workpieces.
Earthing transmission for non-stop rotation
mounting
dia feed-through
2 digital drive systems
Options
Technical data WP-TVV-5 WP-TVV-10 WP-TVV-20 WP-TVV-50 WP-TVV-75 WP-TVV-100 WP-TVV-150

Load 5.0 kN 10.0 kN 20.0 kN 50.0 kN 75.0 kN 100.0 kN 150.0 kN
Free-turning radius 600-1000 mm 600-1600 mm 900-2150 mm 1000-2500 1000-2500 1000-2500 1250-2750
mm mm mm mm
Centre height 600-1000 mm 600-1600 mm 900-2150 mm 1000-2500 1000-2500 1000-2500 1250-2750
mm mm mm mm
Vertical stroke 0.40 m 1.00 m 1.25 m 1.50 m 1.50 m 1.50 m 1.50 m
Rotating speed 120.0 °/sec 90.0 °/sec 60.0 °/sec 8.0 °/sec 8.0 °/sec 8.5 °/sec 6.5 °/sec
Stroke speed 2.0 m/min 2.0 m/min 2.0 m/min 2.0 m/min 2.0 m/min 2.0 m/min 2.0 m/min
Turning range +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360°
257
258
Workpiece Positioner with horizontal rotation
The workpiece positioner has a horizontally arranged Technical features

faceplate. Workpiece which is fixed on this face plate
can be turned into the optimum processing position
by a vertical turning axis. This workpiece positioner
is also used to build up a simple double-station robot
system. The positioner changes the station by a 180°
rotation.
mounting
Options
Pneumatic indexing of the 0 position at the coun-
ter bearing
Technical data WP-TH-5 WP-TH-10 WP-TH-20 WP-TH-30 WP-TH-60 WP-TH-100 WP-TH-200

Centre height 400-600 mm 500-1000 mm 400-700 mm 400-600 mm 400-700 mm 400-700 mm 400-700 mm
Grid centre height 100 mm 100 mm 100 mm 100 mm 100 mm 100 mm 100 mm
Turning range +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360°
259
260
Workpiece Positioner with vertical rotation with counter
bearing
The workpiece positioner with counter bearing has Technical features
two vertically arranged faceplates. The workpiece
fixture is mounted between the two faceplates. Thus, the workpiece fixture
heavy or long workpieces can be perfectly positioned Parallel working of the system operator and the
and welded. The two components of the workpiece po- robot.
sitioner are mounted on the shop floor. As an option, Repeatability less than 0.1 mm
the workpiece positioner can be mounted on a com- Service-friendly direct drives
mon base frame (WP-TC-F). The counter bearing can Opening in steel construction for a good accessibil-
be moved on the base frame manually (WP-TC-M) or ity during service works
by a motor (WP-TC-E). Thus, the distance between the Earthing transmission for non-stop rotation
two faceplates can be adjusted according the different Adjusting screws for a precise alignment during
workpiece sizes. mounting
dia feed-through
Clamping length and free-turning radius can be
adapted to the component size and the space on
site.
Options
Clamping stroke mounted on counter bearing (S)
ter bearing
Counter bearing to be moved manually (M)
Counter bearing to be moved by motor (E)
Counter bearing mounted on base frame (F)
Technical data WP-TC-5 WP-TC-10 WP-TC-20 WP-TC-40 WP-TC-60 WP-TC-100 WP-TC-200

Free-turning radius 700-1300 mm 700-1300 mm 700-1000 mm 1000-1500 600-2000 mm 700-1700 mm 800-2200 mm
/ 1000-1500 mm / 700-
mm 1000 mm
Grid free-turning radius 100 mm 100 mm 100 mm / 100 mm / 200 mm 200 mm 200 mm
250 mm 250 mm
Travelling length 1.00 - 3.00 m 1-5 m 1-5 m 1-10 m 1-10 m 1-12 m 1-15 m
Grid travelling length 1.00 m 1.00 m 1.00 m 1.00 m 1.00 m 1.00 m 1.00 m
Clamping length 1.00-3.00 m 1-5 m 1-5 m 1-10 m 1-10 m 1-12 m 1-15 m
Grid clamping length 1.00 m 1.00 m 1.00 m 1.00 m 1.00 m 1.00 m 1.00 m
Variants F/M/S F/M/S E/F/M/S E/F/M E/F/M E/M E
Turning range +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360°
261
262
Counter bearing
The movable counter bearing has a vertically arranged Technical features

faceplate. The counter bearing is used with another
workpiece positioner. The workpiece fixture is mount-
ed between the two faceplates of the counter bearing
and the selected workpiece positioner.. The counter
bearing can be moved on the base frame manually
(WP-C-M) or by a motor (WP-C-E). Thus, the distance
mounting
between the two faceplates can be adjusted according
the different workpiece sizes.
dia feed-through
The free-turning radius can be adapted to the com-
ponent size and the space on site.
Options
Pneumatic quick clamping system to change the
machine
ter bearing
Technical data WP-C-2,5 WP-C-5 WP-C-10 WP-C-20 WP-C-30 WP-C-50 WP-C-100

Free-turning radius 700-1300 mm 700-1300 mm 700-1000 mm 700-1000 mm 600-2000 mm 700-1700 mm 800-2200 mm
/ 1000-1500 / 1000-1500
mm mm
Grid free-turning radius 100 mm 100 mm 100 mm / 100 mm / 200 mm 200 mm 200 mm
250 mm 250 mm
Travelling length 0-5 m 0-5 m 0-6 m 0-6 m 0-8 m 0-8 m 0-10 m
Variants M M E/M E/M E/M E E
263
264
Workpiece Positioner with vertical rotation with roller
support
faceplate and a counter bearing with supporting rolls.
The workpiece fixture is mounted on the faceplate and
supported at the counter bearing by means of the sup-
porting rolls. The two components are screwed on the
Parallel working of the system operator and the
robot.
floor or, as an option, can be mounted on a base frame
(QR-WP-TR-F), moved manually (QR-WP-TR-M) or electri-
cally (QR-WP-TR-E).
mounting
dia feed-through
site.
Options
ter bearing
Counter bearing mounted on base frame (F)
Counter bearing for processing long, rotation-sym-
metric components
Technical data WP-TR-10 WP-TR-20 WP-TR-40 WP-TR-100 WP-TR-300

Load 10.0 kN 20.0 kN 40.0 kN 100.0 kN 300.0 kN
Free-turning radius 700-1300 mm 700-1000 mm / 1000-1500 mm / 700-1700 mm 900-2100 mm
1000-1500 mm 700-1000 mm
Grid free-turning radius 100 mm 100 mm / 250 mm 100 mm / 250 mm 200 mm 200 mm
Travelling length 1-5 m
Grid travelling length 1.00 m
Clamping length 1-5 m 1-5 m 1-10 m 1-12 m
Grid clamping length 1.00 m 1.00 m 1.00 m 1.00 m 0.00 m
Rotating speed 120.0 °/sec 90.0 °/sec 60.0 °/sec 8.0 °/sec 6.5 °/sec
Turning range +/- 360° +/- 360° +/- 360° +/- 360° +/- 360°
Variants F F/M F
265
266
Counter bearing with roller support
The movable counter bearing with supporting rolls Technical features

has no vertical faceplate but only serves as support-
ing bearing. The counter bearing with supporting
rolls is used with another workpiece positioner. The
workpiece is clamped between the faceplates of the
mounting
workpiece positioner and the counter bearing with
supporting rolls. The counter bearing can be moved on
the base frame manually (WP-R-M) or by a motor (WP-
C-E). Thus, the distance can be adjusted according the Options
different workpiece sizes.
Counter bearing in roller bracket design
Technical data WP-R-5 WP-R-10 WP-R-20 WP-R-50 WP-R-150

Load 5.0 kN 10.0 kN 20.0 kN 50.0 kN 150.0 kN
Free-turning radius 700-1300 mm 700-1000 mm / 1000-1500 mm / 700-1700 mm 900-2100 mm
1000-1500 mm 700-1000 mm
Grid free-turning radius 100 mm 100 mm / 250 mm 100 mm / 250 mm 200 mm 200 mm
Travelling length 0-6 m
Variants M
267
268
Workpiece Positioner with swivelling and horizontal rota-
tion
The workpiece positioner has a turning axis with Technical data
horizontally arranged faceplate and another swivel-
ling axis which swivels the faceplate in both directions
by 90°. The faceplate is moved from a horizontal to a
vertical position. The workpiece positioner is designed
to position light to medium-weight, large-surface
workpieces perfectly for welding.
mounting
dia feed-through
Options
ter bearing
Technical data WP-TSH-1 WP-TSH-2,5 WP-TSH-5

Load 1.0 kN 2.5 kN 5.0 kN
Free-turning radius 750 mm 750 mm 750 mm
Centre height 1000-1500 mm / 700-1000 mm
Grid centre height 100 mm 100 mm 100 mm / 250 mm
Rotating speed 120.0 °/sec 120.0 °/sec 120.0 °/sec
Faceplate height 1.0 m 1.0 m 1.0 m
Tilting speed 120.0 °/sec 120.0 °/sec 90.0 °/sec
Turning range +/- 360° +/- 360° +/- 360°
Tilting range +/- 180° +/- 180° +/- 180°
269
270
Workpiece Positioner with turning and tilting movement
The workpiece positioner has a turning axis with Technical features

vertically arranged faceplate which is mounted near
to a tilting axis shifted by 90°. The tilting axis moves
the turnable faceplate from a vertical to a horizontal
position. Thus the positioner is designed for medium-
weight compact workpieces. Flat and large-surface
workpieces can be loaded easily.
mounting
dia feed-through
Options
Counter bearing for processing long, rotation-sym-
metric components
Technical data WP-TT-5 WP-TT-10 WP-TT-20

Load 5.0 kN 10.0 kN 20.0 kN
Free-turning radius 900 mm 900 mm 900 mm
Centre height 900 mm 900 mm 900 mm
Tilting speed 120.0 °/sec 15.0 °/sec 8.5 °/sec
Turning range +/- 360° +/- 360° +/- 360°
Tilting range 135 ° 135 ° 135 °
271
272
Workpiece Positioner with turning and swivelling move-
ment
The workpiece positioner has a horizontal swivelling Technical features
axis with an L-shaped extension arm. The extension
arm contains a vertical turning axis with horizontal
faceplate which serves for holding the workpiece. The
robot.
workpiece positioner is designed to position medium-
weight to heavy complex workpieces perfectly for
welding.
mounting
dia feed-through
Options
90° indexing of the tilting axis when using counter
bearing
Pneumatic quick clamping system to change the
machine
Technical data WP-TS-2,5 WP-TS-5 WP-TS-10 WP-TS-15 WP-TS-30 WP-TS-50 WP-TS-100

Free-turning radius 500 mm 700-1000 mm 1000 mm 1000-1750 1250-2000 2000-3000 2000-3000
mm mm mm / 1750- mm
2000 mm
Grid free-turning radius 100 mm 250 mm 250 mm 250 mm / 500 mm
500 mm
Faceplate height 0.85 m 0.8 m 0.75 m 0.9 m 1.2 m 1.25 m 1.4 m
Option hollow-drilled shaft Ø630 mm Ø800 mm Ø880 mm
Swivelling speed 120.0 °/sec 90.0 °/sec 60.0 °/sec 20.0 °/sec 8.0 °/sec 8.5 °/sec 6.5 °/sec
Turning range +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360° +/- 360°
Swivelling radius 450 mm 750 mm 1200 mm 1250 mm 1500 mm 1750 mm 1750 mm
273
274
ment and vertical stroke
The workpiece positioner has a horizontal swivelling Technical data
axis with an L-shaped extension arm. The extension
arm contains a vertical turning axis with horizontal
faceplate. The integrated vertical stroke facilitates
loading and unloading of the workpieces near to the
floor and increases the free-turning radius of the
swivelling movement. Due to the workpiece light to
medium-weight, long and complex workpieces can be
welded.
mounting
Options
90° indexing of the tilting axis when using counter
bearing
Technical data WP-TSV-5 WP-TSV-10 WP-TSV-50

Load 5.0 kN 10.0 kN 50.0 kN
Free-turning radius 700-1000 mm 1000 mm 2000-3000 mm / 1750-2000 mm
Grid free-turning radius 100 mm 250 mm / 500 mm
Faceplate height 0.6-1.6 m 0.75-2.0 m 1.0-2.5 m
Vertical stroke 1.00 m 1.25 m 1.50 m
Swivelling speed 90.0 °/sec 60.0 °/sec 8.5 °/sec
Stroke speed 2.0 m/min 2.0 m/min 2.0 m/min
Turning range +/- 360° +/- 360° +/- 360°
Swivelling radius 750 mm 1200 mm 1750 mm
Swivelling range +/- 185° +/- 185° +/- 185°
275
276
ment and counter bearing
The workpiece positioner has a horizontally arranged Technical features
swivelling axis. An extension arm with integrated
turning axis with counter bearing is mounted on this
axis. The workpiece can be turned and swivelled. Due
to the workpiece light to medium-weight, long and
complex workpieces can be welded.
mounting
dia feed-through
site.
Options
ter bearing
Technical data WP-TSC-5 WP-TSC-40 WP-TSC-60

Load 5.0 kN 40.0 kN 60.0 kN
Free-turning radius 700-800 mm 1000-1250 mm / 700-1000 mm 600-1400 mm
Grid free-turning radius 100 mm 100 mm / 250 mm 200 mm
Centre height 1250 mm 1100 mm 1250 mm
Clamping length 1.00-3.00 m 4.00 m 2-6.5 m
Turning range +/- 360° +/- 360° +/- 360°
Swivelling radius 1200 mm 3000 mm 4750 mm
277
278
Workpiece Positioner with turning/swivelling movement
and fixed counter bearing
The workpiece positioner has a horizontal swivel- Technical features
ling axis with an U-shaped extension arm which is
supported by a counter bearing. In the middle of the
U-shaped extension arm there is a horizontal faceplate
which is moved by means of a vertical turning axis.
This positioner takes up large-volume, complex work-
pieces and positions them perfectly for welding.
mounting
Technical data WP-TSF-2,5 WP-TSF-50

Load 2.5 kN 50.0 kN
Free-turning radius 500-1500 mm 1200-3000 mm
Grid free-turning radius 100 mm 100 mm
Centre height 1200 mm 2100 mm
Faceplate height 1.2 m 1.6 m
Rotating speed 120.0 °/sec 8.0 °/sec
Turning range +/- 360° +/- 360°
279
280
Horizontal rotary positioner with vertical rotation and
counter bearing
The two-station positioner changes the station by Technical features
a horizontal rotation. Each station is equipped with
a horizontal turning axis and counter bearing. The
two-station positioner is designed to take up light to
medium-weight, long workpieces.
mounting
dia feed-through
site.
Options
ter bearing
Technical data WP-DH-TC-2,5 WP-DH-TC-5 WP-DH-TC-7,5 WP-DH-TC-10 WP-DH-TC-20

Load 2.5 kN 5.0 kN 7.5 kN 10.0 kN 20.0 kN
Free-turning radius 500-700 mm 500-800 mm 500-800 mm 1200-2000 mm 600-1000 mm
Grid free-turning radius 100 mm 100 mm 100 mm 100 mm 100 mm
Clamping length 1.00-2.00 m 1.50-3.00 m 1.50-2.50 m 2.5-3.5 m 2.5-3.5 m
Grid clamping length 0.25 m 0.25 m 0.25 m 0.25 m 0.25 m
Faceplate height 0.85 m 1.0 m 0.9 m 1.0 m 1.0 m
Rotating speed 120.0 °/sec 120.0 °/sec 120.0 °/sec 120.0 °/sec 120.0 °/sec
Turning speed 90.0 °/sec 50.0 °/sec 50.0 °/sec 40.0 °/sec 40.0 °/sec
Turning range +/- 360° +/- 360° +/- 360° +/- 360° +/- 360°
Turning range +/- 180° +/- 180° +/- 180° +/- 180° +/- 180°
Turning radius 2000 mm 4250 mm 2250 mm 3250 mm 3250 mm
Variants M
281
282
Vertical rotary positioner with vertical rotation and coun-
ter bearing
The two-station positioner changes the station by a Technical features
vertical rotation. Each station is equipped with a hori-
zontal turning axis and counter bearing. The two-sta-
tion positioner requires little space and is designed to
take up light to medium-weight, long workpieces. The
vertical turning movement for station change has a
small collision radius. Systems with this double-station
positioner require only little floor space.
mounting
dia feed-through
site.
Options
ter bearing
Technical data WP-DV-TC-2,5 WP-DV-TC-5 WP-DV-TC-10 WP-DV-TC-20

Load 2.5 kN 5.0 kN 10.0 kN 20.0 kN
Free-turning radius 400 mm 500 mm 750 mm 750 mm
Clamping length 1.00-2.00 m 1.25-3.00 m 2-6 m 2-5 m
Grid clamping length 0.25 m 0.25 m 0.25 m 0.25 m
Faceplate height 1.0 m 1.1 m 1.2 m 1.3 m
Rotating speed 120.0 °/sec 120.0 °/sec 120.0 °/sec 90.0 °/sec
Swivelling speed 120.0 °/sec 90.0 °/sec 20.0 °/sec 8.0 °/sec
Turning range +/- 360° +/- 360° +/- 360° +/- 360°
Swivelling range +/- 180° +/- 180° +/- 180° +/- 180°
Variants M E/M
283
284
Horizontal rotary positioner with turning/swivelling
movement
horizontal rotation. Each station is equipped with a
horizontal swivelling axis. An L-shaped extension arm
is mounted on this axis. The extension arm contains a
turning axis with horizontal faceplate. The positioner
can take up light to medium-weight complex work-
pieces and positions them perfectly for welding.
Grease cartridge for live ring
mounting
dia feed-through
Options
ter bearing
Technical data WP-DH-TS-1 WP-DH-TS-2,5 WP-DH-TS-5 WP-DH-TS-10

Load 1.0 kN 2.5 kN 5.0 kN 10.0 kN
Free-turning radius 300 mm 500 mm 700-1000 mm 1000 mm
Grid free-turning radius 100 mm
Faceplate height 0.85 m 0.75 m 0.9 m 1.0 m
Rotating speed 120.0 °/sec 120.0 °/sec 120.0 °/sec 90.0 °/sec
Tilting speed 120.0 °/sec 120.0 °/sec 90.0 °/sec 60.0 °/sec
Swivelling speed 50.0 °/sec 50.0 °/sec 50.0 °/sec 40.0 °/sec
Turning range +/- 360° +/- 360° +/- 360° +/- 360°
Swivelling range +/- 180° +/- 180° +/- 180° +/- 180°
Tilting range +/- 185° +/- 185° +/- 185° +/- 185°
285
286
Horizontal rotary positioner with turning/swivelling
movement and counter bearing
horizontal rotation. Each station is equipped with a
horizontal swivelling axis. An extension arm with in-
tegrated turning axis and counter bearing is mounted
on this axis. The positioner turns and tilts the work-
piece so that light to medium-weight, long and com-
plex workpieces can be welded.
Grease cartridge for live ring
mounting
dia feed-through
site.
Options
Technical data WP-DH-TSC-5 WP-DH-TSC-10

Load 5.0 kN 10.0 kN
Free-turning radius 500-750 mm 1200 mm
Grid free-turning radius 50 mm 100 mm
Clamping length 1.25-2.00 m 1.00-2.50 m
Grid clamping length 0.25 m 0.25 m
Faceplate height 1.1 m 0.85 m
Rotating speed 120.0 °/sec 120.0 °/sec
Turning speed 50.0 °/sec 30.0 °/sec
Turning range +/- 360° +/- 360°
Turning range +/- 180° +/- 180°
Turning radius 2750 mm 3750 mm
Variants M
287
288
Two-station positioner with horizontal station change
The two-station positioner with horizontal station Technical features

changeover has two opposite stations. A clamping
plate is available to support the tools. The operator
works parallel to the robot.
mounting
robot.
Technical data WP-DH-2,5 WP-DH-7,5 WP-DH-10

Load 2.5 kN 7.5 kN 10.0 kN
Clamping plate 500x1000 1250x1550 800x1500
289
290
Compact cells
The QIROX compact cells are perfectly matched "ready semblies, welding torch, torch bracket incl. collision
to weld" systems in a compact size. Each compact cell sensor and an automatic torch cleaning unit. Depend-
is equipped with two welding areas so that a high ing on the system, manual rotary tables, rotary tables
and economic duty cycle can be obtained. The cells with turning or turn-tilt positioners are available. We
are characterised by a container design and mounted also supply a complete safety package, i. e. protective
on a base frame which can be transported via forklift enclosure, service door, start preselection with emer-
trucks. The basic system dimensions allow a transport gency stop, glare shield and light barrier. The compact
by truck without any disassembly. Each system consists cell is the perfect solution to start with automation
of a QIROX robot with controller, a water-cooled QINEO and to economically weld smaller components.
welding power source with wire drive unit, cable as-
291
Compact cell 1
"Ready to weld system" with manual rotary table Technical features

QR-WP-DH. The max. load per station is 100 kg, the
horizontal clamping surface 1000 x 700 mm.
Minimal downtime from maintenance and repair
work
By means of a pneumatic indexing the positioner and
thus the component to be welded is exactly posi-
Short commissioning times due to pre-assembly
and run-off tests
tioned. The inserting height of approx. 900 mm and
the end-of-stroke damper enable a gentle operation
High productivity thanks to parallel work stations
of the positioner and an ergonomic working space for
Low space requirement due to compact design
your employees.
Easy integration into any production line
Comprehensive standard supply and individual
options
Excellent efficiency due to optimum product qual-
ity and perfectly matched components
One contact for development, project manage-
ment, production and service
Technical data CC-1

Positioner
Load per station 1.0 kN
Clamping surface per station 1000 x 710 mm
Time for station changeover manually by operator
Dimensions (L/W/H) 4590 x 2150 x 2000 mm
Weight approx. 2.700 kg
Safety technology
292
Compact cell 2
"Ready to weld system" with manual rotary table. Two Technical features
fix clamping tables, 1000 x 670 mm each, load up to
150 kg, are placed in front of the robot. In the front
work
loading area the start preselection is automatically
activated by actuating a manual sliding door. Thus si-
and run-off tests
multaneous welding and loading of the other working
space is possible. The system convinces by very short
ways and a very high availability.
options
Technical data CC-2

Positioner
Time for station changeover
Safety technology
293
Compact cell 3
"Ready to weld system" with two rotating positioners Technical features

QR-WP-TV 2.5KN. In each station components up to
Ø 700 mm, 650 mm long and 250 kg can be clamped.
options
The welding area is closed by a manual sliding door
which automatically releases the start preselection
signal. Thus simultaneous welding and loading of the
other working space is possible. The system convinces
work
by very short ways and a very high availability. All robot
and positioner axes are fully synchronised. This pro-
vides optimum welding results.
and run-off tests

Technical data CC-3

Positioner
Clamping surface per station Ø 700 x 650 mm
Safety technology
294
Compact cell 4
"Ready to weld system" with two-station rotary table in Technical features

H form. This system is characterised by a rotating po-
sitioner QR-WP-TC 2l.5KN for components up to Ø 800
work
mm, 1000 mm long and 250 kg. By means of the rotary
axis the station is turned from the loading area to the
and run-off tests
robot within 3 sec. During this procedure, the loading
area is protected by a light barrier and an additional
lateral safety fence There is a glare shield between the
two stations. Thus the system operator is perfectly
protected. Due to the rotating positioners your com-
options
ponent is placed in optimum welding position. All
robot and positioner axes are fully synchronised. This
provides optimum welding results.
Technical data CC-4

Positioner
Load per station 1,2 - 2,5 kN
Clamping surface per station Ø 800 x 1000 mm
Safety technology
295
Compact cell 5
"Ready to weld system" with automated rotary table Technical features

QR-WP-TH. The max. load per station is 250kg, the
horizontal clamping surface of the total plate Ø 1200.
work
The cycle time of the rotary axis is only 2-3 sec. The
loading area is secured by a light barrier within a short
and run-off tests
distance of approx. 300 mm to the clamping plate.
This allows very short ways for the operator to load
and unload the components. The inserting height of
approx. 900 mm and a glare shield between the sta-
tions provide an ergonomic working space for your
options
employees.
Technical data CC-5

Positioner
Safety technology
296
Compact cell 6
"Ready to weld system" with two-station positioner Technical features

QR-WP-DH-TS-2.5KN. In each station components up
to 250 kg and a diameter of up to Ø 900 mm can be
work
clamped. Per station the positioner has a fully syn-
chronised turn/tilt axis for an optimum component
and run-off tests
positioning. This provides optimum welding results.
The loading area is protected by a lateral safety fence
and a light barrier during the cycle. The inserting
height of approx. 900 mm and a glare shield between
the stations provide an ergonomic working space for
options
your employees.
Technical data CC-6

Positioner
Clamping surface per station Ø 600 mm
Time for station changeover approx. 3 sec.
Safety technology
297
298
Compact systems
The QIROX compact systems are perfectly matched "ready with wire drive unit, cable assemblies, welding torch,
to weld" systems in a compact size. Each compact system torch bracket incl. collision sensor and an automatic
is equipped with two stations so that a high and eco- torch cleaning unit. As an option, the processes TIG,
nomic duty cycle can be obtained. TIG+cold wire, plasma welding and plasma cutting can
While the robot is welding the components on one side, be integrated. Depending on the system, rotary tables
loading or unloading is carried out simultaneously on with fix clamping plates or a rotary table with turning or
the other station. Robot and positioner are mounted on turn-tilt positioners are available. We also supply a com-
a common base frame. This guarantees a quick and per- plete safety package, i. e. swing doors, start preselection
fectly adjusted system assembly. with emergency stop, glare shield and light barrier and
optionally the protective housing. The compact system is
Each compact system consists of a QIROX robot with the optimum solution for economic welding of small to
controller, a water-cooled QINEO welding power source medium-sized components up to 3000 mm and 1000 kg.
299
Compact system C10
"Ready to weld system" with automated rotary table Technical features

QR-WP-TH. You can select the load per station from 250
- 1000 kg. According to the load, the horizontal clamp-
work
ing surface varies between 1000 x 500 mm to 2000 x
800 mm.
and run-off tests
By means of a motor-drive rotary axis the positioner
and thus the component to be welded is exactly posi-
tioned. Depending on the system, the cycle time is 2-6
sec. The inserting height of approx. 750 mm and the
glare shield between the stations provide an ergo-
options
nomic working space for your employees. The scope
of supply also comprises the complete safety system
such as swing doors, light barriers and start preselec-
tion panel with emergency stop button. As an option
we also supply the protective enclosure adapted to the
conditions at your site.
Technical data CS-10-2,5kN CS-10-7,5kN CS-10-10kN

Load per station 2.5 kN 7.5 kN 10.0 kN
Peripheral equipment Robot base Robot base Robot base
Robot mounting Floor Floor Floor
Positioner
Suitable tool size 100x500 - 200x800 mm 100x500 - 200x800 mm 100x500 - 200x800 mm
300
Compact system C20
"Ready to weld system" with two-station rotary table Technical features

incl. a turning axis and a counter bearing per station.
The robot is mounted in upright position. The turn-
work
ing axis changes the station by a horizontal rotation.
Depending on the system, each station can be loaded
and run-off tests
with 250-1000 kg. Clamping lengths of 1250 mm -
2500 mm can be realised with this system.
Due to the two-station design, robot welding in one
station and loading of the components in the other
station is simultaneously possible. This reduces the
options
secondary processing times and ensures a high system
availability. The scope of supply also comprises the
complete safety system such as swing doors, light
barriers and start preselection panel with emergency
stop button. As an option we also supply the protective
enclosure adapted to the conditions at your site.
Technical data CS-20-2,5kN CS-20-5kN

Load per station 2.5 kN 5.0 kN
Peripheral equipment Robot base Robot base
Robot mounting Floor Floor
Positioner
Suitable tool size up to Ø 1600x2000 mm up to Ø 1600x2000 mm
301
Compact system C30

The robot is mounted in overhead position on a C
work
frame. The turning axis changes the station by a hori-
zontal rotation. Depending on the system, each station
and run-off tests
can be loaded with 500-1000 kg. Clamping lengths of
2000-3500 mm can be realised with this system.
options
Technical data CS-30-5kN CS-30-7,5kN

Peripheral equipment C-frame C-frame
Positioner
Suitable tool size up to Ø 1600x3000 mm up to Ø 1600x3000 mm
302
Compact system C40

The robot is mounted in upright position. The turning
work
axis changes the station in vertical direction. Depend-
ing on the system, each station can be loaded with
and run-off tests
250-500 kg. Clamping lengths of 1250 mm - 3000mm
can be realised with this system.
options

Positioner
Suitable tool size Ø 800x1500 mm Ø 800x1500 mm
303
Compact system C50

incl. a turn/tilt axis per station. The robot is mounted
in upright position. Depending on the system, each
work
station can be loaded with 250-1000 kg. A free-turn-
ing diameter of 1000 mm and a faceplate of 330 mm
and run-off tests
(250 kg variant) or 1400-1600 mm with a faceplate of
600 mm (500/1000 kg variant) offer optimum process-
ing conditions for your components.
options

Positioner
Suitable tool size up to Ø 1600 mm up to Ø 1600 mm
304
Compact system C60

incl. a turn/tilt axis per station. The robot is mounted
in overhead position on a C frame. Depending on the
work
system, each station can be loaded with 500-1000 kg.
A free-turning diameter of 1400-1600 mm with a face-
and run-off tests
plate of 600 mm offer optimum processing conditions
for your components.
options

Peripheral equipment C-frame C-frame
Robot mounting Overhead Overhead
Positioner
Suitable tool size up to Ø 1600 mm up to Ø 1600 mm
305
306
QIROX Sensor systems QR-SN
The main task of our sensor systems is to ensure qual- applications:

ity control through precise welding procedures. The
flexibility of your systems increases due to the control QR-SN-LS / QIROX® - Laser offline sensors
and compensation of tolerances between the pro- QR-SN-LT / QIROX® - Laser online sensors
grammed paths and the real workpieces. QR-SN-ST / QIROX® - Arc sensors
QR-SN-TS / QIROX® - Tactile offline sensors
QR-SN-TT / QIROX® - Tactile online sensors
CLOOS sensors which have been proven in the field are

available for the most varied materials, weld forms and
307
308
Tactile offline sensors QR-SN-TS
The CLOOS tactile sensor uses the torch gas nozzle, the Technical features
welding wire or a separate tracer pin to determine the
start and/or end of the weld seam and corrects the
Direct integration into the user program
programmed welding path. In the case of a V seam, the
No interference from attached parts (except when
using a tracer pin)
CLOOS tactile sensor also measures the seam volume.
Furthermore, the tactile sensor can be combined with
the arc sensors. In the case of a V seam, the CLOOS tac-
tile sensor measures the seam volume and calculates
the seam volume. Weld parameters can be adapted to
the seam volume change. The tactile sensor is normal-
ly used together with the arc sensors.
Technical data QR-SN-TS-W QR-SN-TS-G QR-SN-TS-P-F QR-SN-TS-P-M

Mains connection 400V ~ / 0.2A 400V ~ / 0.2A 400V ~ / 0.2A 400V ~ / 0.2A
Measuring voltage 60 V & 700 V 60 V & 700 V 60 V & 700 V 60 V & 700 V
Dimensions (mm) L:380 W:210 H:300 L:380 W:210 H:300 L:380 W:210 H:300 L:380 W:210 H:300
Weight 1200 grams 1200 grams 1200 grams 1200 grams
Detecting tool Welding wire Gas nozzle Tracer pin fix Tracer pin flexible
Tracking speed approx. 30 cm/min approx. 30 cm/min approx. 30 cm/min approx. 60cm/min
309
310
Tactile online sensors QR-SN-TT
The CLOOS analogue sensor is a tactile measuring Technical features

system to be used with machines for automated weld-
ing. The sensor scans the joint of the workpiece and
Memory function – data storage for welding of
cover runs
directly corrects the welding torch.
Online compensation of workpiece tolerances
Technical data QR-SN-TT

Max. tracking speed 150 cm/min
Measuring distance 100 mm
Joint depth min. 2 mm
Mains connection 230 V
Measuring voltage +/-10 V
Detecting tool Tracer pin flexible
311
312
Arc sensor QR-SN-ST
The CLOOS arc sensor uses the arc to measure the joint Technical features
position of the workpiece. As the arc sensor enables
measurement and welding to be carried out simul-
Adaptation of the correcting sensitivity
taneously, the cycle times are not influenced. At the
Direct connection to the QIROX® robot controller
same time workpiece distortions – for example due to
No interference from attached parts - no restriction
of accessibility
heat expansion – are directly compensated for. After
the robot has welded the root seam, the correction
cover runs
data determined is saved and used for welding the
cover runs. The final result is further improved when
Nearly constant cycle times
combined with the CLOOS gas nozzle or offline sensor.
Due to the weld start determination by the gas noz-
zle sensor and the subsequent seam guide by the arc
sensor an optimum result is reached when having big
tolerances.
Technical data QR-SN-ST

Mains connection 24V DC / 1A
Weld current range 50 - 500 A
Min. side height 5.0 mm
Max. welding speed 200 cm/min
313
314
Laser offline sensors QR-SN-LS
The offline laser sensors are non-contact optical meas- Technical features
uring systems to position the robot and to determine
the weld geometry. The laser sensor tracks the weld
Fixture below or beside the collision sensor
seam (offline) before starting the welding process. An
Short search intervals due to optimum sensor posi-
tion
optimum combination is to use the offline laser sensor
for weld start determination and the arc sensor for
Maximum flexibility: Largely irrespective of the
material
seam tracking.
cover runs
Programming and analysis possible using the QI-
ROX® robot controller teach pendant
Insensitive due to non-contact measuring proce-
dure
Technical data QR-SN-LS-S 100-40 C QR-SN-LS-L 400-85 C QR-SN-LS-L 400-85 C-M

Measuring distance 100 mm 400 mm 400 mm
Measuring range +/- 40 mm +/- 85 mm +/- 85 mm
Resolution horizontal 50 µm 50 µm 50 µm
Resolution vertical 16 µm 110 µm 110 µm
Min. side height 1.0 mm 1.0 mm 1.0 mm
Gap width min. 1.0 mm 1.0 mm 1.0 mm
Max. tracking speed 300 cm/min 300 cm/min 300 cm/min
Dimensions (mm) D:42 W:85 H:160 Diam.:100 H:43 Diam.:100 H:43
Laser protection class 2 3R 3R
Safety distance 6.5 m 6.5 m
Video camera no no yes
315
316
Laser online sensors QR-SN-LT
The operation of the CLOOS online laser sensor opens Technical features
up completely new application areas for automated
welding. The online laser sensor first moves to the pro-
Direct connection to the QIROX® robot controller
grammed start position. The tracking section is then
For the most varied weld seam shapes
measured online during welding. These sensors are
Integrated quality control with interruption n the
case of tolerance deviations
used in nearly any application ranges. During weld-
ing the weld geometry is measured and the welding
Online compensation of workpiece tolerances
parameters are adaptively adjusted.
Weld parameter selection in the case of weld ge-
ometry changes
Tracking of weld start and weld end
Technical data QR-SN-LT 140-50-140 QR-SN-LT 100-35-65 QR-SN-LT 110-60-90

Measuring distance 140 mm 100 mm 110 mm
Vertical field of view 140 mm 65 mm 90 mm
Horizontal field of view 50 (27-76) mm 35 (23-46) mm 60 (37-83) mm
Resolution horizontal 50 µm 35 µm 60 µm
Resolution vertical 90 µm 60 µm 150 µm
Min. side height 1.0 mm 1.0 mm 2.0 mm
Gap width min. 1.0 mm 1.0 mm 2.0 mm
Max. tracking speed 200 cm/min 200 cm/min 200 cm/min
Dimensions (mm) L:33 B:58 H:158.9 L:35 B:60 H:172.4 L:35 B:60 H:172.4
Laser protection class 3B 3B 3B
Safety distance 1.5 m 2.0 m 1.7 m
317
318
Laser tool measurement system QR-SN-LTM
The robot repeatability is essential for the processing Technical features

quality of a robot system. Even minimal differences be-
tween the actual and calculated central tool position
Integrated auxiliary equipment enables cause of
fault to be quickly recognised and removed
can have an adverse effect on the processing quality. If
an automatic test facility is integrated into the pro-
Program reproducibility is maintained
gram run, this risk will be reduced. The robot checks
Quality assurance
the tool tip position in the tool measurement system
Production of faulty workpieces is almost com-
pletely prevented
which is mounted on the robot base and measures the
tool tip by means of a light barrier.
No interruption of the production due to the meas-
urement process
Technical data Tool Controller CTMS incl. robot software

Fork opening 50 mm
Mains connection 10 - 35V DC / <30mA
Output 1 x pnp
Load current 200 mA, short circuit protection
smallest part to be detected Ø 0.5 mm
Operating temperature -10°C - 60°C
Max. tracking speed 50 cm/min
Type of protection IP 64
Laser protection class 2
319
320
RoboPlan professional
QIROX RoboPlan QRP professional Technical features

Roboplan QRP professional is the maximum configura-
tion level of the modular Cloos Offline programming
Program reload
software. Due to the application of various software
Program upload
modules you can perfectly match the system to your
Transfer path generation
requirements. Thus you reach the highest program-
Weld path generation
ming efficiency.
Search in pipe interior
RoboMod
QIROX RoboPlan QR XRoI:
Renumber points
Roboplan QR XRoI is the first step into the world of of-
Collision testing
fline programming. It offers an intuitive user interface
Excel conversion
and an excellent price/performance ratio.
Fade-out of component collision
For simple standard robot systems XRoI is the opti-
Save views as picture
mum solution for cost-efficient programming with a
AVI Video generation
low after-teach expenditure. Roboplan QR XRoI cannot
be extended with the Roboplan QRP modules, however,
the upgrade to Roboplan QRP professional is always
possible.
321
322
Carl Cloos Schweißtechnik GmbH
Industriestraße
D-35708 Haiger
Telefon +49 (0)2773 85-0

Telefax +49 (0)2773 85-275
E-Mail info@cloos.de
www.cloos.de
www.cloos.de

Katalog 2012 en Qirox

Uploaded by

Copyright:

Available Formats

Katalog 2012 en Qirox

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Katalog 2012 en Qirox

Uploaded by

Copyright:

Available Formats

QIROX®

QIROX® is the new CLOOS product brand QIROX Robots

Advantages for increased productivity

3 capacity classes, 2 products lines,

The robot mechanics QRH320/350/410 is a six-axis Technical features

Technical data Robot QRC-320 Robot QRC-350 Robot QRC-410

The robot mechanics QRH360/390 is a six-axis ar- Technical features

Technical data Robot QRH-360 Robot QRH-390

The robot mechanics QRH320/350/410-H is a six-axis Technical features

The robot mechanics QRH360/390-H is a six-axis artic- Technical features

Advantages robot positioner: working envelope

Technical data RP-S-5

The C-shaped frame positions the robot overhead on a Technical features

Technical data RP-C-4 RP-C-6

Technical data RP-CT-200 RP-CT-250

Technical data RP-CV-5

Technical data RP-CTV-5

The vertical stroke which is mounted on the floor or a Technical features

Technical data RP-VS-5

The vertical stroke which is mounted on the floor or a Technical features

Technical data RP-TVS-5

At the vertical stroke a robot is mounted in overhead Technical features

Technical data RP-VO-10 RP-VO-20

At the rotating vertical stroke a robot is mounted in Technical features

Technical data RP-TVO-20

The floor-mounted linear track allows to mount the Technical features

Technical data RP-FL-10 RP-FL-20 RP-FL-35 RP-FL-50 RP-FL-120

The top mounted track system, mounted on posts, Technical features

Technical data RP-GL-10 RP-GL-20 RP-GL-35 RP-GL-50

Technical data RP-HL-5 (GL-20) RP-HL-10 (GL-35) RP-HL-10 (GL-50)

Technical data RP-VL-5 RP-VL-5-C

Technical data RP-CL-5

Advantages robot positioner:  Solution for each workpiece size

The workpiece positioner has a vertically arranged Technical features

Technical data WP-TVV-5 WP-TVV-10 WP-TVV-20 WP-TVV-50 WP-TVV-75 WP-TVV-100 WP-TVV-150

The workpiece positioner has a horizontally arranged Technical features

Technical data WP-TH-5 WP-TH-10 WP-TH-20 WP-TH-30 WP-TH-60 WP-TH-100 WP-TH-200

Technical data WP-TC-5 WP-TC-10 WP-TC-20 WP-TC-40 WP-TC-60 WP-TC-100 WP-TC-200

The movable counter bearing has a vertically arranged Technical features

Technical data WP-C-2,5 WP-C-5 WP-C-10 WP-C-20 WP-C-30 WP-C-50 WP-C-100

Technical data WP-TR-10 WP-TR-20 WP-TR-40 WP-TR-100 WP-TR-300

The movable counter bearing with supporting rolls Technical features

Technical data WP-R-5 WP-R-10 WP-R-20 WP-R-50 WP-R-150

Technical data WP-TSH-1 WP-TSH-2,5 WP-TSH-5

The workpiece positioner has a turning axis with Technical features

Technical data WP-TT-5 WP-TT-10 WP-TT-20

Technical data WP-TS-2,5 WP-TS-5 WP-TS-10 WP-TS-15 WP-TS-30 WP-TS-50 WP-TS-100

Technical data WP-TSV-5 WP-TSV-10 WP-TSV-50

Technical data WP-TSC-5 WP-TSC-40 WP-TSC-60

Technical data WP-TSF-2,5 WP-TSF-50

Technical data WP-DH-TC-2,5 WP-DH-TC-5 WP-DH-TC-7,5 WP-DH-TC-10 WP-DH-TC-20

Technical data WP-DV-TC-2,5 WP-DV-TC-5 WP-DV-TC-10 WP-DV-TC-20

Technical data WP-DH-TS-1 WP-DH-TS-2,5 WP-DH-TS-5 WP-DH-TS-10

Technical data WP-DH-TSC-5 WP-DH-TSC-10

The two-station positioner with horizontal station Technical features

Technical data WP-DH-2,5 WP-DH-7,5 WP-DH-10

"Ready to weld system" with manual rotary table Technical features

Technical data CC-1

Technical data CC-2

"Ready to weld system" with two rotating positioners Technical features

Advantages robot positioner: Solution for each workpiece size